共查询到20条相似文献，搜索用时 125 毫秒
1.
天山山前主要推覆构造区的地壳缩短 总被引：19，自引：11，他引：8
利用平衡地质剖面方法研究天山山前主要褶皱带的地壳缩短,其中3条平衡剖面分别横跨天山南簏的柯坪逆断裂-褶皱带和库车逆断裂-褶皱带,2条剖面横跨天山北簏的玛纳斯活动逆断裂-褶皱带,其余1条剖面横跨吐鲁番中央隆起逆断裂-褶皱带。柯坪活动逆断裂-褶皱带、库车逆断裂-褶皱带、玛纳斯逆断裂-褶皱带和吐鲁番盆地的地壳缩短量分别为40~45km、27~37km、8·5~10·5km和6~7km。天山山前活动逆断裂-褶皱带在EW向上互不重叠,它们的缩短量大致代表了该经度上新生代的最小地壳缩短量,反映出天山地壳缩短由西向东减小的趋势。假定天山山前活动逆断裂-褶皱带开始形成的时间为距今2·5Ma的西域砾岩沉积期,考虑到博阿断裂、塔拉斯-费尔干纳断裂在SN向上的缩短活动分量,上述4个地段的最小缩短速率分别为15·4~17·3mm/a、12·7~16·5mm/a、3·8~4·5mm/a和2·3~2·7mm/a。活动走滑断裂在天山内部特定位置向左偏转,走向由NW转为NWW,在断裂转折的部位走滑活动量转化为天山SN向的缩短变形 相似文献
2.
焉耆盆地北缘和静逆断裂-褶皱带中晚第四纪变形速率 总被引：4，自引：4，他引：0
焉耆盆地为南天山内部的一个山间盆地,盆地北缘发育1排第四纪新生褶皱带,即和静逆断裂-褶皱带。中晚第四纪以来,由于和静逆断裂-褶皱带的持续活动使得在褶皱生长过程中形成的多期洪积地貌面发生反向掀斜变形。利用高精度差分GPS,对褶皱带中部哈尔莫敦背斜区内的多期变形地貌面的地形形态进行了测绘,判定背斜的生长主要以翼旋转为主。利用背斜北翼不同地貌面的反向掀斜角度,分别计算了不同期次地貌面的隆升和缩短变形量。结合原地宇宙成因核素深度剖面法和光释光测年法,对背斜区内的F4,F3b,F2洪积台地面和T1阶地面的形成年龄进行了测定,发现背斜在距今约550ka、428.3+57.6-47.2ka和354.3+34.2-34.8ka不同时段的平均隆升速率从0.31±0.24mm/a下降至0.15±0.02mm/a,同时背斜北翼的翼旋转速度也呈逐渐减小的趋势。但背斜自起始变形开始,缩短速率却大致保持恒定为约0.3mm/a。而这一恒定的缩短速率与现今横跨和静逆断裂-褶皱带所观测的GPS速率具有很好的一致性,说明在天山内部的哈尔莫敦背斜区,短尺度的GPS速率可以代表长尺度的地壳应变速率,同时反映出山体内部一系列断层和褶皱构造在吸收和调节整体变形量时也起到一定的作用。 相似文献
3.
库车坳陷是南天山中段新构造运动异常强烈的地区,发育4排近EW向展布的逆断裂-背斜带。通过野外实地考察及前人资料分析,认为该区晚第四纪以来的构造变形主要集中于喀桑托开逆断裂-背斜带、秋里塔格逆断裂-背斜带和最南缘的亚肯逆断裂-背斜带之上,而且不同构造带之间的变形方式存在较大差异。作者利用全站仪(total station)对上述构造带的变形地貌进行了精确测量,并结合年代学分析,得到喀桑托开逆断裂-背斜的地壳缩短速率为1·0~2·0mm/a,秋里塔格逆断裂-背斜带的地壳缩短速率为2·5~3·0mm/a,亚肯盲逆断裂-背斜的地壳缩短速率为1·5~2·0mm/a。晚第四纪以来,库车坳陷SN向总的地壳缩短速率不<5·0~7·0mm/a 相似文献
4.
南天山柯坪塔格推覆体前缘断裂活动性质及速率 总被引：1，自引：0，他引：1
柯坪塔格推覆体位于天山西南麓,由多排NEE—EW向的褶皱-逆断裂带组成。文中介绍了皮羌—巴楚磷矿以西3排褶皱-逆断裂带前缘断裂的活动性质及速率。新获资料表明,各排褶皱-逆断裂带前缘皆由多条断裂构成,都具典型的逆断层性质。其中最新活动断裂位于褶皱-逆断裂带的最前缘,活动时代为晚更新世—全新世。它们切割冲沟T0、T1、T2、T3阶地堆积,形成不同高度的断层陡坎。根据陡坎剖面测量和年龄样品测试,求得T0面形成以来断裂的垂直位移量、位移速率、地壳缩短量和缩短速率分别是0.9～1.1m、0.53～0.65mm/a、1.93～2.56m和1.14～1.52mm/a;T1面形成以来分别是1.4～1.8m、0.36～0.46mm/a、3.00～3.86m和0.77～0.99mm/a;T2面形成以来分别是2.1～3m、0.31～0.45mm/a、4.50～6.98m和0.67～1.04mm/a;T3面形成以来分别是3.4～4.2m、0.28～0.35mm/a、7.29～9.22m和0.61～0.77mm/a。根据T0面形成以来的缩短量和缩短速率,计算柯坪塔格推覆体约1.7ka以来总的地壳缩短量是9.65～12.80m,缩短速率 相似文献
5.
天山是典型的陆内再生造山带,研究其现今内部断裂的变形特征和活动速率对于认识整个天山造山带的应变分配方式和变形过程具有重要意义。现今天山活动构造的研究大部分集中在天山两侧向盆地扩展的前缘部分,然而对于天山内部活动构造的定量化研究并不多见。该研究聚焦于南天山与其内部山间盆地之间的边界断裂——焉耆盆地北缘断裂,通过野外地质调查可将该断裂分为东西2段,其中东段逆冲断错了一系列山前洪积扇,形成了线性明显的陡坎地貌。通过利用高精度差分GPS对23组断层陡坎的测量,发现其垂向位移大致可分为1.9m、2.4m和3.0m 3组,推测单次地震的同震位移量为0.5~0.6m。其中保存于3.0m左右陡坎的地貌面为区域性地貌面,通过利用原地宇宙成因核素测定该地貌面的暴露年龄约为5ka,这与博斯腾湖沉积物所记录到冷暖气候交替的时间段相符,说明气候的冷暖变化控制了南天山前地貌面的形成和废弃。结合断层陡坎高度及地貌面年龄可得焉耆盆地北缘断裂东段5ka以来的倾滑速率为0.6~0.7mm/a,SN向的地壳缩短速率约为0.4mm/a,垂向滑动速率约为0.5mm/a。依据地震矩计算公式评估焉耆盆地北缘具有发生7.5级强震的可能性。该研究为认识现今天山的变形过程和变形方式提供定量化的数据支持,对于理解天山内部的强震发生地点和地震危险性具有重要的现实意义。 相似文献
6.
托斯台逆断裂-褶皱带晚第四纪活动特征 总被引：1，自引：0，他引：1
托斯台逆断裂-褶皱带位于乌鲁木齐山前坳陷的西部，为近东西向展布的新生代逆断裂．背斜带。它主要由北单斜带、中部背斜带和南单斜带3个构造带组成，在各构造带均发育逆活动断裂。地震勘探资料显示，南单斜带与中部背斜带为滑脱体，逆断裂在深部沿滑脱面与清水河子深断裂相汇。研究表明，北单斜带与中部背斜带逆断裂断错了晚更新世堆积物，在晚更新世有显著的活动；南单斜带逆断裂断错了全新世堆积物，在全新世时期有最新活动。中部背斜带逆断裂晚更新世以来水平缩短速率为0．6～1．3mm／a；南单斜逆断裂全新世水平缩短速率为0．2～0．6mm／a。 相似文献
7.
发育在北天山山麓的活动断裂褶皱带属于向前扩展的薄皮构造，且所有的背斜都是断裂扩展褶皱，主滑脱面距地表8～9km深。距今292万年以来，地壳缩短13．5～14．6km，缩短率是4.62～5．0mm／a。自30000年前至今，准噶尔南缘断裂和齐古道断裂褶皱带的活动十分微弱，而独山子和玛纳斯道断裂-褶皱带则是活动褶皱-断裂带。北天山地区普遍发育三级阶地,受活动逆断裂和褶皱的影响，均产生褶曲变形和错断。距今12000～13000年以来，吐谷鲁逆断裂-背斜的垂直滑动速率、抬升速率、缩短速率分别是0．83～0．91、3.46～3.75和1.23～1．33mm／a。1906年的玛纳斯地震发生在一条盲断坡上，但是其同震破裂和褶皱隆升却出现在玛纳斯逆断裂-褶皱带上，震中距玛纳斯逆断裂-褶皱带约40km。揭示出北天山挤压拗陷区的孕震构造是一个由深部盲断坡-滑脱断层-浅层断坡构成的复杂构造系统。通过上述活动构造和古地震研究的结果可以推测，天山北麓未来发生大震（M≥7．0）的位置可能是在呼图壁河至金沟河段和金沟河至奎屯河段的齐古道断裂-褶皱带上，其震级相当于1906年玛纳斯地震。乌鲁木齐挤压坳陷中的活动逆断裂褶皱带上只有发生M≤6．0地震的可能性。 相似文献
8.
天山是我国和中亚地区最主要的新生代再生造山带之一 ,是一个强烈新活动的挤压缩短和隆起带 ,最高海拔达 70 0 0 m以上 ,平均海拔亦达 40 0 0～ 5 0 0 0 m。在山体两侧的山前坳陷地区发育多排活动逆断裂—背斜带 ,晚第四纪以来的活动褶皱受活动逆断裂控制 ,形成于不同深度的多重水平滑脱面和逆冲断坡之上 ,属于断裂—扩展褶皱。山体内部则发育了由逆断裂控制的压陷盆地。天山地区的地震活动即受这些活动构造所控制。邓起东、冯先岳等 2 0 0 0年 7月出版的新著《天山活动构造》对天山南北缘和内部的活动构造进行了全面研究 ,其中包括对北天山… 相似文献
9.
柯坪逆冲推覆构造带是西南天山山前晚新生代以来形成的活动逆断裂-褶皱带,由5~6排近平行的弧形褶皱带组成,出露地层为寒武系—第四系。背斜形态多为复式箱状背斜和不对称的斜歪背斜,分别与断层弯曲背斜和断层扩展背斜的几何形态一致。地震勘探资料显示,各褶皱带前缘活动逆断裂在深部归并于统一的、由寒武系中的石膏层组成的滑脱面。滑脱面深度具有南浅北深、东浅西深的特点,皮羌断裂西侧滑脱面深度约为9km,东侧滑脱面深度为5km。在柯坪逆冲推覆构造中部的皮羌断裂东西两侧各5km和8km的位置,以断层弯曲褶皱和断层扩展褶皱构造模型为指导,用线长平衡的方法完成了2条长度分别为78km和73km的平衡地质剖面,恢复到变形前的形态后计算出这2条剖面上的地壳缩短量分别为40km和45km,缩短率为33%和37%。由于对柯坪逆冲推覆构造开始形成时间的证据较少,所以要计算长期的缩短速率是比较困难的。对比天山南麓库车活动逆断裂-褶皱带的形成时代,以及柯坪逆冲推覆构造与印干断裂的关系,认为柯坪逆冲推覆构造形成于第四纪早期的西域砾岩沉积阶段,按距今2.5Ma计算,柯坪逆冲推覆构造的地壳缩短速率是15.4~17.3mm/a 相似文献
10.
《地震地质》2017,(6)
祁连山作为青藏高原东北缘的重要造山带,是高原向NE方向扩展的最前缘,逆冲和褶皱作用是青藏高原向N扩展的重要构造变形方式。白杨河发育于祁连山内部,向N汇入前陆区酒西盆地。因此,可以通过白杨河阶地研究祁连山北缘的变形特征。通过对白杨河阶地的详细调查与测量,得到如下认识:1)白杨河阶地具有流域分段性,在地形陡变带及盆地内白杨河背斜区发育多级阶地。以阶地级数来说,以牛头山为界,上游发育2—3级阶地,下游发育4—5级阶地。2)从白杨河阶地纵剖面获得昌马断裂的垂直活动速率为(0.32±0.09)mm/a,地壳缩短速率为(0.12±0.09)mm/a;旱峡-大黄沟断裂T5形成以来(约13ka)没有垂直活动;老君庙背斜区T5阶地(约9ka)褶皱变形隆升量为(6.55±0.5)m,缩短量为(3.47±0.5)m,隆升速率为(1.23±0.81)mm/a,缩短速率为(0.67±0.44)mm/a;白杨河背斜开始活动时期约为300kaBP,其170ka以来的平均隆升速率约(0.21±0.02)mm/a,缩短速率为(0.14±0.03)mm/a;3)北祁连山地区在响应青藏高原向N扩展的过程中表现出2种不同的变形特征:在祁连山内部以剪切变形为主,表现为块体侧向挤出;而在祁连山北缘地形陡变带和酒西盆地内部以挤压变形为主,表现为地壳缩短和隆起,并且盆地内构造缩短变形量占总变形量的50%左右。 相似文献
11.
THE LATE QUATERNARY TECTONIC DEFORMATION REVEALED BY THE TERRACES ON THE BAIYANG RIVER IN THE NORTHERN QILIAN MOUNTAINS 
下载免费PDF全文
下载免费PDF全文 The Qilian Mountains, as a major orogenic belt in the northeastern margin of the Tibetan plateau, is the forefront of the expansion of the plateau to the northeast, where thrusts and folds dominate tectonic deformation. The Baiyang River starts from the inner Qilian Mountains, flowing northward across various structures, and finally into the Jiuxi Basin. This work focused on exhaustive investigations to the terraces on this river to characterize the Late Quaternary tectonic deformation in this region. The results show that (1)these river terraces on the Baiyang River are segmented, of which multiple levels developed at steep terrains and anticlines in the basin. Bounded by the Niutou Mountains, mainly 2-3 and 4-5 levels of terraces formed in the upper and lower reaches, respectively. (2)The longitudinal profiles along the river suggest a vertical motion rate of the Changma fault as (0.32±0.09)mm/a and crustal shortening rate (0.12±0.09)mm/a. There was no vertical activity since the formation of T5 surface (13ka)on the Hanxia-Dahuanggou fault. At the terrace T5 (9ka)on the Laojunmiao anticline, fold uplift amounts (6.55±0.5)m and shortening amounts (3.47±0.5)m, yielding uplift and shortening rates (1.23±0.81)mm/a and (0.67±0.44)mm/a, respectively. The Baiyang River anticline began to be active about 300ka with uplift and shortening rates (0.21±0.02)mm/a and (0.14±0.03)mm/a, respectively since 170ka. (3)In the Qilian Mountains, there were two different deformation characteristics in response to the expansion of the Tibetan plateau. Shear deformation dominates the inner Qilian Mountains, which is manifested as lateral extrusion of blocks. In the northern margin of Qilian Mountains and Jiuxi Basin, the deformation is dominated by compression, expressing crustal shortening and uplift, and the shortening within the basin accounts about half of the total deformation. 相似文献
12.
位于龙门山逆冲推覆构造带东侧的龙泉山背斜,构成了四川前陆盆地的前陆隆起。通过室内航空相片对凯江跨背斜段的地貌面的解译,结合野外考察可知凯江发育3级阶地,其中T1、T2为堆积阶地,T3为基座阶地。在野外用差分GPS测量了阶地的空间坐标信息,同时采集了各级阶地堆积物的测年样本,并经实验分析约束了阶地的形成年龄。另外,对石油地震剖面解译揭示出龙泉山背斜北段地壳缩短和隆升主要是通过褶皱膝折带迁移机制进行的,滑脱层的深度约6km。利用面积守恒准则计算出龙泉山背斜晚更新世以来的地壳缩短速率约为(1.36±0.41)mm/a、隆升速率为(0.64±0.19)mm/a。通过滑脱层的推覆抬升机制形成的龙泉山背斜,给青藏高原东缘变形模式中的逆断层推覆地壳缩短造山增加了证据。 相似文献
13.
焉耆盆地北缘和静逆断裂-褶皱带古地震破裂方式和时间序列 总被引：2，自引：1，他引：1
古地震研究是构造地质基础研究工作之一,获得较为精细的古地震结果有利于提高对断层构造变形的样式、强度以及时间的认识。焉耆盆地是南天山东段的山间盆地,现今的构造应力场特征以挤压兼有走滑为主。盆地南北缘断裂均为全新世活动断裂,南缘开都河断裂以走滑运动为主。盆地北缘断裂向盆内扩展的新生和静逆断裂-褶皱带以逆冲运动为主,且具备发生7级以上大地震的能力。因此,对于焉耆盆地北缘和静逆断裂-褶皱带的古地震破裂方式和发生时间的研究具有重要意义。调查发现,其中的哈尔莫敦背斜南翼主逆断裂以30°左右向盆内逆冲,在河漫滩和T1阶地上形成了3排断层陡坎。在3条断层陡坎上开挖的5个探槽中,通过标志地层建立的时间序列可以确定6次古地震事件的先后关系。利用14C和光释光(OSL)测年手段获得了探槽中相关地层和坎前堆积物的沉积时代,利用逐次限定法得到了各次古地震事件的发生时间和全新世以来2ka左右的古地震复发间隔。结果显示F1断层在所有的古地震事件中都发生了破裂,F2断层只在事件E时产生了破裂,F3断层只在事件D和事件E中发生过破裂。从古地震事件上分析,事件D是一次3条断层同时破裂的事件,事件E是一次F1和F32条断层同时破裂的事件,其他事件都只在F1断层上破裂。和静逆断裂的古地震破裂同时存在必然性和不确定性。 相似文献
14.
The Tian Shan Mountains is an active orogen in the continent. Previous studies on its tectonic deformation focus on the expanding fronts to basins on either side, while little work has been done on its interiors. This work studied the north-edge fault of the Yanqi Basin on the southeastern flank of Tian Shan. Typical offset landforms, and lineaments of scarps on the eastern segment of this fault were used to constrain the vertical displacement and shortening rates. Geological and geomorphic mapping in conjunction with high-resolution GPS differential measurement reveals that the vertical offsets can be divided into three groups of 1.9m, 2.4m and 3.0m, and the coseismic vertical offset was estimated as 0.5~0.6m. In situ 10Be terrestrial cosmogenic nuclide dating of three big boulders capping the regional geomorphic surface that preserved 3.0m vertical offset suggests that the surfaces were exposed at~5ka. Meanwhile, the lacustrine sediments from Bosten Lake within the Yanqi Basin suggest climate change during cooling-warming transitions was also at~5ka. The climate, therefore, controlled creation and abandonment of geomorphic surfaces in southern piedmont of Tian Shan. Combining the exposure ages and vertical offsets, we inferred that the east section of the north-edge fault in the Yanqi Basin has a dip slip rate 0.6~0.7mm/a,~0.5mm/a of vertical slip and~0.4mm/a of shortening since 5ka. Based on calculation of earthquake moment, we estimated that this fault is capable of generating M7.5 earthquakes in the future. This study provides new data for further understanding tectonic deformation of Tian Shan and is useful in seismic hazard assessment of this area. 相似文献
15.
DONG Jin-yuan LI Chuan-you ZHENG Wen-jun LI Tao LI Xin-nan ZHANG Pei-zhen REN Guang-xue DONG Shao-peng LIU Jin-rui 《地震地质》2019,41(2):341-362
With the continuous collision of the India and Eurasia plate in Cenozoic, the Qilian Shan began to uplift strongly from 12Ma to 10Ma. Nowadays, Qilian Shan is still uplifting and expanding. In the northern part of Qilian Shan, tectonic activity extends to Hexi Corridor Basin, and has affected Alashan area. In the southern part of Qilian Shan, tectonic activity extends to Qaidam Basin, forming a series of thrust faults in the northern margin of Qaidam Basin and a series of fold deformations in the basin. The southern Zongwulong Shan Fault is located in the northeastern margin of Qaidam Basin, it is the boundary thrust fault between the southern margin of Qilian Shan and Qaidam Basin. GPS studies show that the total crustal shortening rate across the Qilian Shan is 5~8mm/a, which absorbs 20% of the convergence rate of the Indian-Eurasian plate. Concerning how the strain is distributed on individual fault in the Qilian Shan, previous studies mainly focused on the northern margin of the Qilian Shan and the Hexi Corridor Basin, while the study on the southern margin of the Qilian Shan was relatively weak. Therefore, the study of late Quaternary activity of southern Zongwulong Shan Fault in southern margin of Qilian Shan is of great significance to understand the strain distribution pattern in Qilian Shan and the propagation of the fault to the interior of Qaidam Basin. At the same time, because of the strong tectonic activity, the northern margin of Qaidam Basin is also a seismic-prone area. Determining the fault slip rate is also helpful to better understand the movement behaviors of faults and seismic risk assessment.Through remote sensing image interpretation and field geological survey, combined with GPS topographic profiling, cosmogenic nuclides and optically stimulated luminescence dating, we carried out a detailed study at Baijingtu site and Xujixiang site on the southern Zongwulong Shan Fault. The results show that the southern Zongwulong Shan Fault is a Holocene reverse fault, which faulted a series of piedmont alluvial fans and formed a series of fault scarps.The 43ka, 20ka and 11ka ages of the alluvial fan surfaces in this area can be well compared with the ages of terraces and alluvial fan surfaces in the northeastern margin of Tibetan Plateau, and its formation is mainly controlled by climatic factors. Based on the vertical dislocations of the alluvial fans in different periods in Baijingtu and Xujixiang areas, the average vertical slip rate of the southern Zongwulong Shan Fault since late Quaternary is(0.41±0.05)mm/a, and the average horizontal shortening rate is 0.47~0.80mm/a, accounting for about 10% of the crustal shortening in Qilian Shan. These results are helpful to further understand the strain distribution model in Qilian Shan and the tectonic deformation mechanism in the northern margin of Qaidam Basin. The deformation mechanism of the northern Qaidam Basin fault zone, which is composed of the southern Zongwulong Shan Fault, is rather complicated, and it is not a simple piggy-back thrusting style. These faults jointly control the tectonic activity characteristics of the northern Qaidam Basin. 相似文献
16.
Measurement of terrace deformation and crustal shortening of some renascent fold zones within Kalpin nappe structure 总被引：2，自引：0，他引：2
YANG XiaoPing RAN YongKang CHENG JianWu CHEN LiChun & XU XiWei Institute of Geology China Earthquake Administration Beijing China 《中国科学D辑(英文版)》2007,50(1):33-42
The Kalpin nappe structure is a strongest thrust and fold deformation belt in front of the Tianshan Mountains since the Cenozoic time. The tectonic deformation occurred in 5―6 striking Meso-zoic-Cenozoic fold zones, and some renascent folds formed on the recent alluvial-proluvial fans in front of the folded mountains. We used the total station to measure gully terraces along the longitudinal to-pographic profile in the renascent fold zones and collected samples from terrace deposits for age de-termination. Using the obtained formation time and shortening amount of the deformed terraces, we calculated the shortening rate of 4 renascent folds to be 0.1±0.03 mm/a, 0.12±0.04 mm/a, 0.59±0.18 mm/a, and 0.26±0.08 mm/a, respectively. The formation time of the renascent folds is some later than the major tectonic uplift event of the Qinghai-Tibet Plateau 0.14 Ma ago. It may be the long-distance effect of this tectonic event on the Tianshan piedmont fold belt. 相似文献
17.
天山造山带是新生代以来复活隆升的陆内造山带，强烈的地震活动性使得理解和认识天山造山带深部结构及盆山耦合关系尤为重要。文章中使用天山造山带及邻区(40°～49°N,79°～93°E)85个台站2017—2019年的背景噪声资料，结合背景噪声互相关方法获得了6～52 s瑞利波相速度频散曲线，利用基于射线追踪的面波直接反演法对天山中段地壳三维S波速度结构及盆山耦合关系进行研究。结果显示：地壳浅层S波速度分布与构造单元中沉积层厚度相关，塔里木盆地北缘、准噶尔盆地南缘表现为低速，天山造山带表现为高速；到了中下地壳，天山造山带下方存在被高速异常包裹的低速体；莫霍面附近，天山造山带表现出相对低速；准噶尔盆地南缘和天山造山带的地壳厚度分别在45～50 km、50～62 km之间，沿南北向，天山造山带莫霍面呈现较为宽缓的形态；在82°～86.5°E之间，塔里木盆地和准噶尔盆地向天山下方双向俯冲，86.5°～88°E之间，准噶尔盆地向天山南向俯冲，由西向东，不同盆山耦合关系揭示了新生代以来天山中段不同区域构造运动差异，为进一步探讨造山动力过程提供参考。 相似文献
18.
帕米尔东北侧地壳结构研究 总被引：50，自引：17，他引：50
1998年在帕米尔东北侧伽师及其周边地区完成了两条深地震宽角反射/折射剖面. 结果表明,西昆仑、塔里木和天山在地壳速度结构、构造特征上显示出较大差异. 塔里木块体具有稳定地块的地壳结构特征,地壳平均速度较高(6.5km/s). 向南进入西昆仑,地壳明显增厚,厚度可达0km左右,且地壳平均速度偏低(6.0-6.2km/s),偏低的地壳平均速度主要来源于相对低速度的下地壳结构,反映了西昆仑褶皱系下地壳介质的特征. 向北进入天山后,地壳同样明显增厚,但增厚的程度低于西昆仑下,约为50-55km. 天山地壳同样具有明显低的平均速度(6.2km/s),显示了天山地壳相对"软"的特征,但天山地壳偏低的平均速度来源于广泛分布于中地壳的低速度层和速度偏低的下地壳. 在印度块体向北强烈推挤的作用下,该区地壳遭受强烈的不均匀变形,塔里木块体向南插入西昆仑下,向北插入天山下,形成了该区强烈地震频繁发生的深部构造环境. 相似文献
19.
FOCAL MECHANISM SOLUTION AND TECTONIC STRESS FIELD CHARACTERISTICS OF THE MIDDLE TIANSHAN MOUNTAINS,XINJIANG 下载免费PDF全文
下载免费PDF全文 ZHANG Zhi-bin ZHAO Xiao-cheng REN Lin 《地震地质》1979,42(3):595-611
The middle part of the Tianshan Mountains in Xinjiang is located in the north-central part of the Tianshan orogenic belt, between the rigid Tarim Basin and Junggar Basin. It is one of the regions with frequent deformation and strong earthquake activities. In this paper, 492 MS>2.5 earthquake events recorded by Xinjiang seismograph network from 2009 to 2018 were collected. The MS3.5 earthquake was taken as the boundary, the focal mechanism solutions of the earthquake events in this region were calculated by CAP method and FOCEMEC method respectively. At the same time the focal mechanism solutions of GCMT recorded historical earthquake events in this region were also collected. According to the global stress map classification standard, the moderate-strong earthquakes in the region are mainly dominated by thrust with a certain slip component, which are distributed near the combined belts of the Tarim Basin, Junggar Basin, Turpan Basin and Yili Basin with Tianshan Mountains. The thrust component decreases from south to north, while the strike-slip component increases. The spatial distribution characteristics of the tectonic stress field in the middle section of the Tianshan Mountains in Xinjiang are obtained by using the damped regional-scale stress field inversion method. The maximum principal compressive stress in axis the study area rotated in a fan shape from west to east, the NW direction in the western section gradually shifted to NE direction, its elevation angle is nearly horizontal, in the state of near horizontal compression. The minimum principal compressive stress axis is nearly EW, and the elevation angle is nearly vertical. Influenced by large fault zones such as Kashi River, Bolhinur, Nalati, Fukang, the southern margin of the Junggar and the north Beiluntai, the local regional stress field presents complex diversity. Under the influence of the northward extrusion of Pamir and Tarim blocks, the whole Tianshan is shortened by compression, but its shortening rate decreases from south to north and from west to east, the stress shape factor increases gradually from west to east, the intermediate principal compressive stress axis exhibits a change in compression to extension. There are some differences in the characteristics of tectonic stress field between the north and south of Tianshan Mountains. The regional maximum principal compressive stress axis is 15° north by east on the south side, while it is nearly NS on the north side. The deformation of the Tianshan Mountains and the two basins on both sides is obviously larger than that in the inside of the mountain. Changes in the crustal shortening rate caused by the rotation of the rigid Tarim block and Junggar block to the relatively soft Tianshan block, as well as the uplifts of Borokonu and Bogda Mountains, the comprehensive influence of the material westward expansion constitute the stress field distribution characteristics of the north and south sides of the middle section of Tianshan Mountains. The recent two MS6.6 earthquakes in the region caused the regional stress field to rotate counterclockwise. The post-earthquake stress field and the main source focal mechanism solution tend to be consistent. The seismic activity in the study area is week in the south and strong in the north. The focal depth is about 20km. Most strike-slip earthquakes occur near the junction belt of the Tianshan and Junggar Basin. 相似文献
20.
天山的晚新生代构造变形及其地球动力学问题 总被引：73，自引：6，他引：73
天山是大陆内部典型的新生代复活造山带，其新生代构造变形的方式，变形量，速度及过程等对于认识大陆内部造山带的变形机理有着重要的意义。本文在对南北天山主要活动构造地质填图和综合研究的基础上，重点探讨了天山的晚新生代构造变形特征及其动力学问题。早更新世以来，特别是早，中更新世之间，天山的构造活动由内部向南北两侧扩展，使得两侧的新生代凹陷逐渐褶皱成山，形成数排新生代褶皱带，整个天山的现代构造活动是一种扇形 相似文献