首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 500 毫秒
1.
On the basis of elastic rebound theory, using the horizontal velocity field of the Chinese mainland calculated from GPS data during three observation periods from 1999 to 2007, the velocity components that are parallel and plumb to the fault zone are calculated respectively for different periods, and then relative ground movements of two sides of the fault zone are analyzed with power function fitting and graphics. The results show that the relative ground movement shows right-lateral shear deformation before the Wenchuan Ms8. 0 earthquake, and at the same time the movement was hindered by the Longmenshan fault zone. Thus, this result has positive significance for distinguishing the elastic strain energy accumulation and deformation anomaly in an earthquake preparation process, and for conducting further research on earthquake prediction.  相似文献   

2.
To monitor the activity of the Huangzhuang-Gaoliying and Babaoshan faults in their middle sections,a network for leveling,short-side ranging,and gravity and geomagnetic observations at the same time and at the same station was set up.By this network,the time and space distribution and the relation between different observations have been studied.It is considered that the Huangzhuang-Gaoliying fault is in a locked state for rapid strain energy accumulation,while the Babaoshan fault is in a state of creep or unrestrained motion.To do comprehensive monitoring of fault activity by making deformation,gravity,and geomagnetic observations at the same time and at the same station,it would be possible to acquire the microscopic state of fault activity and the data of earthquake preparation; such an approach is considered worth popularizing.  相似文献   

3.
Through numerical simulation for GPS data, aseism/c negative dislocation model for crustal horizontal movement during 1999-2001 in the northeast margin of Qinghai-Xizang block is presented, combined with the spatial distri-bution of apparent strain field in this area, the characteristics of motion and deformation of active blocks and their boundary faults, together with the place and intensity of strain accumulation are analyzed. It is shown that: a) 9 active blocks appeared totally clockwise motion from eastward by north to eastward by south. Obvious sinistral strike-slip and NE-NEE relative compressive motion between the blocks separated by Qilianshan-Haiyuan fault zone was discovered; b) 20 fault segments (most of them showed compression) locked the relative motion between blocks to varying degrees, among the total, the mid-east segment of Qilianshan fault (containing the place where it meets Riyueshan-Lajishan fault) and the place where it meets Haiyuan fault and Zhuanglanghe fault, more favored accumulation of strain. Moreover, the region where Riyueshan-Lajishan fault meets north boundary of Qaidam block may have strain accumulation to some degree, c) Obtained magnitude of block velocities and locking of their boundaries were less than relevant results for observation in the period of 1993-1999.  相似文献   

4.
Based on GPS velocity during 1999-2007, GPS baseline time series on large scale during 1999-2008 and cross-fault leveling data during 1985-2008, the paper makes some analysis and discussion to study and summarize the movement, tectonic deformation and strain accumulation evolution characteristics of the Longmenshan fault and the surrounding area before the MS8.0 Wenchuan earthquake, as well as the possible physical mechanism late in the seismic cycle of the Wenchuan earthquake. Multiple results indicate that:GPS velocity profiles show that obvious continuous deformation across the eastern Qinghai-Tibetan Plateau before the earthquake was distributed across a zone at least 500km wide, while there was little deformation in Sichuan Basin and Longmenshan fault zone, which means that the eastern Qinghai-Tibetan Plateau provides energy accumulation for locked Longmenshan fault zone continuously. GPS strain rates show that the east-west compression deformation was larger in the northwest of the mid-northern segment of the Longmenshan fault zone, and deformation amplitude decreased gradually from far field to near fault zone, and there was little deformation in fault zone. The east-west compression deformation was significant surrounding the southwestern segment of the Longmenshan fault zone, and strain accumulation rate was larger than that of mid-northern segment. Fault locking indicates nearly whole Longmenshan fault was locked before the earthquake except the source of the earthquake which was weakly locked, and a 20km width patch in southwestern segment between 12km to 22.5km depth was in creeping state. GPS baseline time series in northeast direction on large scale became compressive generally from 2005 in the North-South Seismic Belt, which reflects that relative compression deformation enhances. The cross-fault leveling data show that annual vertical change rate and deformation trend accumulation rate in the Longmenshan fault zone were little, which indicates that vertical activity near the fault was very weak and the fault was tightly locked. According to analyses of GPS and cross-fault leveling data before the Wenchuan earthquake, we consider that the Longmenshan fault is tightly locked from the surface to the deep, and the horizontal and vertical deformation are weak surrounding the fault in relatively small-scale crustal deformation. The process of weak deformation may be slow, and weak deformation area may be larger when large earthquake is coming. Continuous and slow compression deformation across eastern Qinghai-Tibetan Plateau before the earthquake provides dynamic support for strain accumulation in the Longmenshan fault zone in relative large-scale crustal deformation.  相似文献   

5.
Lijiang-Daju fault, the seismogenic fault of the 1996 Lijiang M=7.0 earthquake, can be divided into Lijiang-Yuhu segment in the south and Yuhu-Daju segment in the north. The two segments show clear difference in geological tectonics, but have the similar dynamic features. Both normal dip-slip and sinistral strike-slip coexist on the fault plane. This kind of movement started at the beginning of the Quaternary (2.4～2.5 Ma B.P.). As to the tectonic types, the detachment fault with low angle was developed in the Early Pleistocene and the normal fault with high angle only after the Mid-Pleistocene (0.8 Ma B.P.). Based on the horizontal displacements of gullies and the vertical variance of planation surfaces cross the Lijiang-Daju fault at east piedmont of Yulong-Haba range, the average horizontal and vertical slip rates are calculated. They are 0.84 mm/a and 0.70 mm/a since the Quaternary and 1.56 mm/a and 1.69 mm/a since the Mid-Pleistocene. The movements of the nearly N-S-trending Lijiang-Daju fault are controlled not only by the regional stress field, but also by the variant movement between the Yulong-Haba range and Lijiang basin. The two kinds of dynamic processes form the characteristics of seismotectonic environment of occurring the 1996 Lijiang earthquake.  相似文献   

6.
To study the crustal movement in the vicinity of the epicenter before the Zhangye MS5.0 earthquake in 2019, the characteristics of crustal deformation before the earthquake are discussed through the GPS velocity field analysis based on the CMONOC data observed from GPS. The baseline time series between two continuous GPS stations and the strain time series of an area among several stations are analyzed in the epicenter area. The resulting time series of baseline azimuth around the epicenter reflects that the energy of the fault in the northern margin of Qilian Mountain is accumulated continuously before 2017. Besides, the movement trend of azimuth slows down after 2017, indicating the stress accumulation on both sides of the seismogenic fault zone has reached a certain degree. The first shear strain and EW-direction linear strain in the epicentral area of the Zhangye MS5.0 earthquake remain steady after 2017, and the surface strain rate decreases gradually after 2016. It is illustrated that there is an obvious deformation loss at the epicentral region three years before the earthquake, indicating that a certain degree of strain energy is accumulated in this area before the earthquake.  相似文献   

7.
On October 27, 2001, a large earthquake with Ms6.0, named the Yongsheng earthquake, occurred along the Jinshajiang segment of Chenghai fault in Yongsheng County, Yuunan Province. It is the largest event to occur along the Chenghai fault in the last 200 years. The seismo-geological survey shows that the seismogenic fault, which is the Jinshajiang segment of Chenghal fault, takes left-lateral strike-slip as its dominant movement pattern. According to differences in vertical motion, motion time, landforms and scales, the Chenhai fault can be divided into eight segments. The Jinshajiang segment has a vertical dislocation rate of 0.4mm/a, far lower than the mean rate of the Chenghai fault, about 2.0 mm/a. It‘ s deduced that the two sides of Jinshajiang segment “stuck“ tightly and hindered the strike-slip of the Chenghai fault. The strong earthquake distribution before this event shows that the Jinshajiang segment was in the seismic gap. The Chenghai fault, as a boundary of tectonic sub-blocks, makes the Northwest Yunnan block and the Middle Yunnan block move clockwise, and their margins move oppositely along the Chenghai fault. In the motion process of the Chenghai fault, structural hindrance and the seismic gap of strong earthquakes are propitious to the concentration and accumulation of structure stress. As a result, the Yongsheng Ms6.0 earthquake occurred. The Sujiazhuang-Shangangfu segment is similar to the Jinshajiang segment with a low vertical motion rate of 0.3 mm/a and in the seismic gap. So it‘s postulated that the segment may become a new structure hindrance, and the Yongsheng Ms6.0 earthquake may trigger the occurrence of future large earthquakes along this segment.  相似文献   

8.
A random synthesis procedure based on finite fault model is adopted for near field strong ground motion simulation in this paper.The fault plane of the source is divided into a number of sub-sources,the whole moment magnitude is also divided into more sub-events.The Fourier spectrum of ground motion caused by a sub-event in given sub-source,then can be derived by means of taking the point source spectrum,attenuation with distance,energy dissipation,and near surface effect,into account.A time history is synthesized from this amplitude spectrum and a random phase spectrum,and being combined with an envelope function.The ground motion is worked out by superposition of all time histories from each sub-event in each sub-source,with time lags determining by the differences between the triggering times of sub-events and ddistances of the sub-sources.From the example of simulations at 21 near field points in a scenario earthquake with 4 dip angles of the fault plane,it is illustrated that the procedure can describe the rupture directivity and hanging wall effect very well.To validate the procedure,the response spectra and time histories recorded at three near fault stations MCN,LV3 and PCD during the Northridge earthquake in 1994,are compared with the simulated ones.  相似文献   

9.
The eastern margin of Tibetan Plateau is one of the most active zones of tectonic deformation and seismicity in China. To monitor strain buildup and benefit seismic risk assessment, we constructed 14 survey-mode global position system(GPS) stations throughout the northwest of Longmenshan fault. A new GPS field over 1999–2011 is derived from measurements of the newly built and pre-existing stations in this region. Sequentially,two strain rate fields, one preceding and the other following the 2008 MW7.9 Wenchuan earthquake, are obtained using the Gausian weighting approach. Strain field over1999–2007 shows distinct strain partitioning prior to the2008 MW7.9 Wenchuan earthquake, with compression spreading over around Longmenshan area. Strain field derived from the two measurements in 2009 and 2011 shows that the area around Longmenshan continues to be under striking compression, as the pattern preceding the Wenchuan earthquake, implying a causative factor of the sequent of 2013 MW6.7 Lushan earthquake. Our GPSderived dilatation shows that both the Wenchuan and Lushan earthquakes occurred within the domain of pronounced contraction. The GPS velocities demonstrate that the Longriba fault underwent slight motion with the faultnormal and-parallel rates at 1.0 ± 2.5 mm and 0.3 ± 2.2 mm/a; the Longmenshan fault displayed slow activity, with a fault-normal rate at 0.8 ± 2.5 mm/a, and a fault-parallel rate at 1.8 ± 1.7 mm/a. Longriba fault is on a par with Longmenshan fault in strain partitioning to accommodate the southeastward motion of eastern margin of the Tibetan Plateau. Integrated analysis of principal strain tensors, mean principal stress, and fast directions of mantle anisotropy shows that west of Sichuan is characterized as mechanically strong crust-mantle coupling.  相似文献   

10.
In this paper, we made a systematic study on more than 40 years of observational data of ten temporary fault-crossing measurement sites in the capital circle region of China. We calculated horizontal and vertica1 components of fault slip, and horizontal extension or compression components. Considering the tectonic characteristics of the capital circle region and regional seismicity, we analyzed the present fault activity of the capital circle region and the relationship with earthquakes. The results show the complexity of fault activity in the region: the level of activity of all faults is low, most faults are left-lateral strike-slip faults; there is less vertical activity than horizontal activity and crustal movement is controlled by horizontal movement; fault activity and earthquake activity have a certain relationship, regional fault activity increases before an earthquake, and fault activity has certain abnormal features before strong earthquakes.  相似文献   

11.
Based on faults surveying and research data in the Tianjin offshore areas, through studying tectonic structure, Quaternary activity, deep structure, stress and strain fields and seismicity in the Tianjin offshore areas, the activity and tectonic features of the faults are determined synthetically. Using seismo-geological data, and the historical and modern seismicity data, the frequency-magnitude relationship model normalized by 500a is established and based on the relationship between the upper limit of maximum magnitude Mu and at/b, the maximum magnitudes of the sea section of the Haihe river fault and the Haiyi fault are calculated. Then Poisson probability model is adopted and the quantitative parameters, such as the maximum magnitude, occurrence probability, recurrence cycle of the faults in the south Tianjin offshore areas in the coming 50 - 200a, are calculated.  相似文献   

12.
In general, earthquake cycle related to earthquake faulting could include four major processes which could be described by(1) fault locking,(2) self-acceleration or nucleation(possible foreshocks),(3) coseismic slip, and(4) post-stress relaxation and afterslip. A sudden static stress change/perturbation in the surrounding crust can advance/ delay the fault instability or failure time and modify earthquake rates. Based on a simple one-dimensional spring-slider block model with the combination of rate-and-statedependent friction relation, in this study, we have approximately derived the simple analytical solutions of clock advance/delay of fault failures caused by a sudden static Coulomb stress change applied in the different temporal evolution periods during an earthquake faulting. The results have been used in the physics-based explanation of delayed characteristic earthquake in Parkfield region, California, in which the next characteristic earthquake of M 6.0 after 1966 occurred in 2004 instead of around 1988 according to its characteristic return period of 22 years. At the same time, the analytical solutions also indicate that the time advance/ delay in Coulomb stress change derived by the dislocation model has a certain limitation and fundamental flaw. Furthermore, we discussed the essential difference between rate- and state-variable constitutive(R–S) model and Coulomb stress model used commonly in current earthquake triggering study, and demonstrated that, in fact, the Coulomb stress model could be involved in the R–S model. The results, we have obtained in this study, could be used in the development of time-dependent fault interaction model and the probability calculation related to the time-dependent and renewal earthquake prediction model.  相似文献   

13.
Using a time series method that combines both the persistent scatterer and small baseline approaches, we analyzed 9 scenes Envisat ASAR data over the L＇Aquila earthquake, and obtained a Shocke＇s displacement field and its evolution processes. The results show that： （1） Envisat ASAR clearly detected the whole processes of displacement field of the L＇Aquila earthquake, and distinct variations at different stages of the displacement field. （2） Preseismic creep displacement → displacement mutation when faulting → constantly slowed down after the earthquake. （3） The area of the strongest deformation and ground rupture was a low-lying oval depression region to the southeast. Surface faulting within a zone of about 22 km× 14 km, with an orientation of 135°, occurred along the NW-striking and SW-dipping Paganica-S. Demetrio normal fault. （4） In analyzing an area of about 54 km x 59 km, bounded by north-south axis to the epicenter, the displacement field has significant characteristics of a watershed： westward of the epicenter shows uplift with maximum of 130 mm in line-of-sight （LOS）, and east of the epicenter was a region with 220 mm of maximum subsidence in the LOS, concentrating on the rupture zone, the majority of which formed in the course of faulting and subsequence.  相似文献   

14.
The indirect boundary element method （IBEM） is used to study three-dimensional scattering of obliquely incident plane SH waves by an alluvial valley embedded in a layered half-space. The free-field response of the layered half-space is calculated by the direct stiffness method, and dynamic Green＇s functions of moving distributed loads acting on inclined lines in a layered half-space are calculated to simulate the scattering wave field. The presented method yields very accurate results since the three-dimensional dynamic stiffness matrix is exact and the moving distributed loads can act directly on the valley boundary without singularity. Numerical results and analyses are performed for amplification of obliquely incident plane SH waves around an alluvial valley in a uniform half-space and in single layer over half-space. The results show that the three-dimensional responses are distinctly different from the two-dimensional responses, and the displacement amplitudes around alluvial valleys in a uniform haft-space are obviously different from those in a layered half-space.  相似文献   

15.
Monitoring of subsurface fluid （underground fluid） is an important part of efforts for earthquake prediction in China. The nationwide network, which monitors groundwater level, water temperature, and radon and mercury in groundwater, has been constructed in the last decades. Large amounts of abnormal fluid changes before and after major earthquakes have been recorded, providing precious data for research in earthquake sciences. Many studies have been done in earthquake fluid hydrogeology in order to probe the nature of the earthquake. Much progress in earthquake fluid hydrogeology has been made in the last decades. The paper provides a review of the advances in research on earthquake fluid hydrogeology over the last 40 years in China. It deals with the following five aspects： （1） an introduction to the development history of monitoring networks construction; （2） cases of different subsurface fluid changes recorded before some major earthquakes which occurred in the last decades; （3） characteristics of subsurface fluid changes following major earthquakes; （4） mechanism of subsurface fluid changes before and following earthquakes; （5） application of earthquake fluids in the hydrogeology field.  相似文献   

16.
In the process of solving Euler vectors based on GNSS horizontal movement field, the number of estimated parameters can affect Euler vector results. This issue is analyzed through theoretical deduction and practical example in this paper. Firstly, the difference between the results of Euler vectors in different solving models is deduced. Meanwhile, based on GNSS horizontal movement field in the Chinese mainland from 2004 to 2007, two common models （ RRM and REHSM） are used to discuss the impact of solving models on Euler vectors and the follow-up study. The result shows that the maximum value of the difference in a block＇s entire rotation can reach 2. 6mm/a, and should not be ignored. Therefore, the results of horizontal movement are different using different kinematic block models, and this should be paid more attention in the analysis of crustal horizontal movement.  相似文献   

17.
In this paper, using the 1999 ~ 2007 GPS velocity field data, and by choosing the optimal block model, we obtained the deformation models applicable to the boundary zones of major blocks and the slip rates of block boundary faults on the mid-southern segment of the North-South Seismic Belt. The results show that： on the Longmenshan fault zone, the tensional and compressive slip rate is small on the Baoxing-Wenchuan segment, about 0. 5 ~ 1.8mm·a^-1, and the rate is relatively significant on the segment of the Wenchuan--Maoxian, as 1.8 ~3.8mm·a^-1; on the Xianshuihe fault belt, there is a certain difference in spatial distribution between the tensional slip rag.e and strike-slip rate： the tensional slip rate （ 8. lmm~a-1） is bigger than the sinistral strike-slip rate （ 4.8mm·a^-1） at the north of the Luhuo region; the tension and compression slip rate is basically the same as the strike-slip rate at Luhuo-Dawu; the Dawu-Kangding section presents a trend of decreased strike-slip rate and increased tensional slip rate; the Kangding-ghimian segment shows a strike-slip nature; the strike-slip rate is significantly greater than the tension/compression rate on the Xiaojiang fault zone; the slip rate on the Red River fault zone shows obvious spatial segmentation, the slip rate is smaller in its northwest part, but with a certain amount of tensional/compression component, 4. 7mm·a^-1 on the Jingdong segment. The segment east of Jingdong （ western Gejiu） is mainly of strike-slip, with a slip rate of 4. 5mm·a^-1.  相似文献   

18.
Comprehensive statistical analysis was performed on the basic features of focal mechanisms of 619 ML≥2.0 earthquakes which occurred in the capital circle area from January 2002 to June 2010. By dividing the capital area into three studying regions based on regional tectonic characteristics, cluster analysis was conducted on the focal mechanisms of all subregions using the longest distance method in the statistical cluster analysis to study the characteristics of tectonic stress tensors. The result shows that dominant P-axis azimuth distribution is NNE-NEE and that of T-axis is NNW--NWW, most of the focal areas are controlled by a horizontal stress field and rupture is mainly of horizontal strike-slip. The maximum principal compression stress orientation is NE75° in the west, NE62° in the middle, and near EW in the east of the capital area. The regional tectonic stress field is characterized by horizontal compression.  相似文献   

19.
民国期间的《嘉陵江日报》对1933年发生在四川省茂县叠溪的地震进行过系列报道,其中根据地质学家常隆庆先生的信函对于该地震考察情况的报道尤为详尽。过去,这些资料从未被地震历史资料的文献收录,鲜为地震工作者所知,具有较高的史料价值。整理转载这6000余字的资料,并作了注释和说明,相信能够为今后的地震史料研究提供参考。  相似文献   

20.
The non-tidal variation gained from continuous gravity observations in stations usually reflects the regional continuous gravity changes. In this paper we focus on studying the non-tidal variation of Baijiatuan station, Beijing where there are two different gravimeters （namely, L＆R-804 and PET-031）. Based on the original raw tidal records of two gravimeters from 2008 to 2011, we first remove various interference from raw data by the standard procedure software-Tsoft; then we model the solid earth tides, ocean tidal loading and pole tide through related parameters; after that we adopt a new segmented polynomial fitting method based on Tsoft to fit the complex drift of spring gravimeter; and finally we calculate the atmospheric loading effects by a linear regression model. After a series of processing we gain the non-tidal variation of the two gravimeters at Baijiatuan site, Beijing. Furthermore, to analyze the non-tidal variation preliminarily, we study the main component of related tidal data by power spectral density. Comparing the non-tidal variation of two different gravimeters, we find seasonal fluctuations in non-tidal results, which are in accordance with the water storage change. Therefore, we take into account the relevance of gravity changes and water storage based on the gravity data of GRACE and water data of the CMAP model from 2003 to 2011 at different sites in the Chinese mainland （Beijing, Chengdu, Shenyang and Shiquanhe） , and make a preliminary analysis on the relationship between gravity changes and water storage.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号