共查询到20条相似文献，搜索用时 109 毫秒
1.
《地球物理学报》2021,64(6)
利用数字岩石物理技术表征复杂非均质多孔岩石跨频段的频散和衰减特征对于综合利用多尺度的地球物理数据进行地层非均质性的刻画具有重要的意义.现有的描述波致流体流动引起的频散和衰减效应的数字岩心动态应力应变模拟方法主要为单频率模拟方法,需要在不同的频率进行多次模拟才能刻画频散和衰减特征.本文提出了宽频带动态应力应变模拟方法,通过给数字岩心加载一个快速趋于恒定的宏观应变,采用波场正演技术求解数字岩心内部流固耦合的应变场和应力场,模拟数字岩心内部的应力松弛过程,从而通过一次模拟计算目标频段范围内连续的频散和衰减曲线.该方法可以成功地用于刻画含裂隙致密岩石挤喷流效应引起的速度频散和衰减特征,并通过数值模拟较为系统地揭示致密地层中控制挤喷流效应的主控物理因素,这些认识也与现有挤喷流效应的理论模型有较好的吻合. 相似文献
2.
《地球物理学进展》2020,(3)
三维数字岩心可在孔隙尺度上对岩石的微观结构进行精细表征,以数字岩心为载体的岩石微观结构分析与岩石物理属性模拟研究已成为岩石物理分析的重要发展方向之一.本文从数字岩心建模、数字岩心图像分析及岩石物理属性模拟三个方面对数字岩心技术进行了介绍.将数字岩心技术在岩石物理领域的应用分为两大类:基于三维数字图像的直接分析和基于三维数字岩心的岩石物理属性数值模拟.通过三维图像分析可获得孔隙结构、矿物成分、粒度分布等信息;通过岩石物理属性模拟可以研究储层岩石电性、弹性、渗流和核磁共振特征.多种手段相结合建立多尺度、多组分数字岩心,突破分辨率与样品尺度的矛盾限制是数字岩心技术未来的发展趋势.数字岩心技术已发展成为岩石物理实验的重要组成部分,如何将孔隙尺度得到的岩石物理参数升尺度到数字井筒、数字油藏中是数字岩心技术发展亟需解决的难题. 相似文献
3.
当代物理实验科学和计算机科学技术的巨大进步为岩石物理的理论和实验研究开辟了新的领域.在细胞自动机基础上发展起来的格子气自动机和格子玻尔滋曼方法就是这种技术进步的产物.本文讨论了格子气自动机的发展及其应用于研究多孔岩石微观孔隙结构对宏观导电特性影响的新方法. 我们开发的模拟多孔岩石导电特性的数值实验新方法，提供了一种可深入到从微观孔隙结构这个尺度上来考察具有复杂孔隙结构的，孔隙度小于10%的低孔、低渗岩石的宏观导电特性及其影响因素.研究表明:Archie 系数m,n并不是传统上的意义，研究各种不同条件下F-、I-Sw关系，结果显示非阿尔奇现象与孔隙介质中孔隙、骨架和流体的混合导电网络有关，得出新的饱和度计算公式.同时还研究了泥质含量和分布、电阻率各向异性对宏观导电特性的影响，提出适用于电阻率各向异性地层的F-、I-Sw的关系.本文最后探讨了应用格子气自动机和格子玻尔滋曼方法进行岩心渗流和核磁共振数值实验的新方法及其发展前景. 相似文献
4.
在非均质天然气藏中,天然气一般呈细小"斑块状"分布于含水岩石骨架内。这种非均质性,即"斑块状饱和",会引起显著的地震波速度频散和能量衰减现象。为了建立地震响应和流体类型之间的联系,本文进行了碳酸盐岩岩石物理建模。首先利用CT扫描分析部分饱和岩石中的流体分布,然后预测不同频率下波响应与岩性、孔隙流体基本性质之间的定量关系,基于岩石薄片分析孔隙结构和地震反演数据制作岩石物理图板,并将这种方法应用于阿姆河右岸地区的灰岩气藏,基于叠后阻抗反演和叠前弹性参数反演,采用地震数据估算岩石孔隙度与含气饱和度,预测结果与多井试气结果吻合。 相似文献
5.
地球表层岩石是由不同尺度的岩石骨架、孔隙、以及孔隙中的流体物质相互作用形成的.研究含有孔隙和裂缝的复杂岩石介质中的地震波传播效应一直是石油地球物理勘探领域的热点.因此,许多学者对复杂岩石介质的渗流特征,和地震波的传播与衰减进行了大量的研究.本文在回顾孔隙介质的地震波的传播与衰减理论发展的基础上,首先介绍了孔弹介质的非局部Biot理论,并用它预测负频散现象,然后介绍了实验观测到的波的衰减与岩石物理性质(如孔隙度和渗透率)的关系,最后,给出了对渗流场和地震波的传播与衰减的认识,并对它们之间的相互关系做了一些展望. 相似文献
6.
介观尺度孔隙流体流动是地震频段岩石表现出较强速度频散与衰减的主要作用.利用周期性层状孔隙介质模型,基于准静态孔弹性理论给出了模型中孔隙压力、孔隙流体相对运动速度以及固体骨架位移等物理量的数学解析表达式,同时利用Biot理论将其扩展至全频段条件下,克服了传统White模型中介质分界面处流体压力不连续的假设. 在此基础上对准静态与全频段下模型介质中孔隙压力、孔隙流体相对运动速度变化形式及其对弹性波传播特征的影响进行了讨论,为更有效理解介观尺度下流体流动耗散和频散机制提供物理依据.研究结果表明,低频条件下快纵波孔压在介质层内近于定值,慢纵波通过流体扩散改变总孔隙压力, 随频率的增加慢波所形成的流体扩散作用逐渐减弱致使介质中总孔压逐渐接近于快纵波孔压,在较高频率下孔压与应力的二次耦合作用使总孔压超过快纵波孔压.介质中孔隙流体相对运动速度与慢纵波形成的流体相对运动速度变化形式一致;随频率的增加孔隙流体逐渐从排水的弛豫状态过渡到非弛豫状态,其纵波速度-含水饱和度变化形式也从符合孔隙流体均匀分布模式过渡到斑块分布模式,同时介质在不同含水饱和度下的衰减峰值与慢纵波所形成的孔隙流体相对流动速度具有明显的相关性. 相似文献
7.
泥质含量及其分布形式对岩电关系影响的数字岩心仿真(英文) 总被引：2，自引：1，他引：1
由于泥质所造成的附加导电现象,泥质含量及其分布形式对电阻率增大系数I和含水饱和度Sw关系具有重要影响,由于岩石物理实验中岩心孔隙结构及其组分构成、分布的微观不可调性,因而泥质分布形式所造成的影响很难通过岩心实验来单独研究。基于数字岩心的格子气自动机方法是一种有效的微观数值模拟方法,本研究利用储层岩心薄片的骨架颗粒尺寸信息资料建立数字岩心模型,结合格子气自动机技术对数字岩心不同饱和流体情况下电的传输特性进行数值模拟研究,揭示了不同泥质含量和泥质分布形式对孔隙介质导电特性非阿尔奇现象产生的影响,建立饱和度指数和泥质含量之间的关系模型,其良好的吻合性表明该方法在岩石物理研究中是一种十分有效的研究方法,而新模型适于在非阿尔奇储层进行准确的饱和度评价。 相似文献
8.
孔隙介质弹性波频散—衰减理论模型 总被引：1，自引：0，他引：1
储层地球物理学中,孔隙介质的各类弹性波模型常用于了解地层岩石物理性质.本文介绍了含油、气、水等物质的多相孔隙介质弹性波频散和衰减研究进展,给出了流体饱和与部分饱和孔隙介质中波传播的物理模型综述.根据孔隙介质中的固、流体分布情况,从相关基础理论和实验研究工作等方面出发,在宏观、微观和介观尺度上对流体替换、Biot孔隙力学、喷射流、Biot喷射流(BISQ)、等效球体癍块饱和、双重孔隙介质局部流动等现有主要合流体孔隙介质速度频散和衰减理论进行了回顾.研究表明,应力松弛过程是弹性波频散和衰减的基本机理,该过程由平衡特征时间刻画.该特征时间与孔隙介质的渗透率、流体粘性和体积模量紧密相关.当波频较低时,特征时间小于波周期,压力平衡得以发生,可以用等效流体模型描述波速;反之,当波频较高时,局部压差始终保持较高水平。整个骨架体积模量升高,等效模型面临困难,发展出斑块饱和模型.在分析了各类模型理论框架适用性以及所面临困难后,我们对未来研究方向给出了一些有意义的探讨. 相似文献
9.
10.
地震波本征衰减反映了地层及其所含流体的一些特性,对油气勘探开发有重要意义.已有的理论研究与实验发现,地震频带内的衰减主要与中观尺度(波长与颗粒尺度之间)的斑状部分饱和、完全饱和岩石弹性非均匀性情况下波诱导的局部流体流有关.这种衰减与岩石骨架、孔隙度及充填流体的性质密切相关.本文着重讨论均匀流体分布、斑状或非均匀流体分布两种情况下部分饱和岩石的纵波模量差异.以经典岩石物理理论和衰减机制认识为基础,通过分析低频松弛状态、高频非松弛状态岩石的弹性模量,讨论储层参数(如孔隙度、泥质含量以及含水饱和度等)与纵波衰减之间的确定性关系.上述方法与模型在陆相砂泥岩地层与海相碳酸盐岩地层中的适用性通过常规测井资料得到了初步验证. 相似文献
11.
Partially saturated reservoirs are one of the major sources of seismic wave attenuation, modulus defect and velocity dispersion in real seismic data. The main attenuation and dispersion phenomenon is wave induced fluid flow due to the heterogeneity in pore fluids or porous rock. The identification of pore fluid type, saturation and distribution pattern within the pore space is of great significance as several seismic and petrophysical properties of porous rocks are largely affected by fluid type, saturation and fluid distribution pattern. Based on Gassmann-Wood and Gassmann- Hill rock physics models modulus defect, velocity dispersion and attenuation in Jurassic siliclastic partially-saturated rocks are studied. For this purpose two saturation patterns - uniform and patchy - are considered within the pore spaces in two frequency regimes i.e., lower frequency and higher frequency. The results reveal that at low enough frequency where saturation of liquid and gas is uniform, the seismic velocity and bulk modulus are lower than at higher frequency where saturation of fluid mixture is in the form of patches. The velocity dispersion and attenuation is also modeled at different levels of gas saturation. It is found that the maximum attenuation and velocity dispersion is at low gas saturation. Therefore, the dispersion and attenuation can provide a potential way to predict gas saturation and can be used as a property to differentiate low from high gas saturation. 相似文献
12.
Qazi Adnan Ahmad Guochen Wu Zong Zhaoyun Wu Jianlu Li Kun Du Tianwei Nasir Khan 《Geophysical Prospecting》2020,68(2):657-677
In exploration geophysics, the efforts to extract subsurface information from wave characteristics exceedingly depend on the construction of suitable rock physics model. Analysis of different rock physics models reveals that the strength and magnitude of attenuation and dispersion of propagating wave exceedingly depend on wave-induced fluid flow at multiple scales. In current work, a comprehensive analysis of wave attenuation and velocity dispersion is carried out at broad frequency range. Our methodology is based on Biot's poroelastic relations, by which variations in wave characteristics associated with wave-induced fluid flow due to the coexistence of three fluid phases in the pore volume is estimated. In contrast to the results of previous research, our results indicate the occurrence of two-time pore pressure relaxation phenomenon at the interface between fluids of disparate nature, that is, different bulk modulus, viscosity and density. Also, the obtained results are compatible with numerical results for the same 1D model which are accounted using Biot's poroelastic and quasi-static equation in frequency domain. Moreover, the effects of change in saturation of three-phase fluids were also computed which is the key task for geophysicist. The outcomes of our research reveal that pore pressure relaxation phenomenon significantly depends on the saturation of distinct fluids and the order of saturating fluids. It is also concluded that the change in the saturation of three-phase fluid significantly influences the characteristics of the seismic wave. The analysis of obtained results indicates that our proposed approach is a useful tool for quantification, identification and discrimination of different fluid phases. Moreover, our proposed approach improves the accuracy to predict dispersive behaviour of propagating wave at sub-seismic and seismic frequencies. 相似文献
13.
Jixin Deng Shangxu Wang Gengyang Tang Jianguo Zhao Xiangyang Li 《Studia Geophysica et Geodaetica》2013,57(3):482-506
In sedimentary rocks attenuation/dispersion is dominated by fluid-rock interactions. Wave-induced fluid flow in the pores causes energy loss through several mechanisms, and as a result attenuation is strongly frequency dependent. However, the fluid motion process governing the frequency dependent attenuation and velocity remains unclear. We propose a new approach to obtain the analytical expressions of pore pressure, relative fluxes distribution and frame displacement within the double-layer porous media based on quasi-static poroelastic theory. The dispersion equation for a P-wave propagating in a porous medium permeated by aligned fractures is given by considering fractures as thin and highly compliant layers. The influence of mesoscopic fluid flow on phase velocity dispersion and attenuation is discussed under the condition of varying fracture weakness. In this model conversion of the compression wave energy into Biot slow wave diffusion at the facture surface can result in apparent attenuation and dispersion within the usual seismic frequency band. The magnitude of velocity dispersion and attenuation of P-wave increases with increasing fracture weakness, and the relaxation peak and maximum attenuation shift towards lower frequency. Because of its periodic structure, the fractured porous media can be considered as a phononic crystal with several pass and stop bands in the high frequency band. Therefore, the velocity and attenuation of the P-wave show an oscillatory behavior with increasing frequency when resonance occurs. The evolutions of the pore pressure and the relative fluxes as a function of frequency are presented, giving more physical insight into the behavior of P-wave velocity dispersion and the attenuation of fractured porous medium due to the wave-induced mesoscopic flow. We show that the specific behavior of attenuation as function of frequency is mainly controlled by the energy dissipated per wave cycle in the background layer. 相似文献
14.
通过对饱和砂岩和大理岩的循环荷载实验,分析了饱和岩石在循环荷载下的应力-应变滞后回线、瞬时杨氏模量、泊松比的“X”形变化曲线,以及杨氏模量随应变振幅的增加而减少等滞后现象,并分析了施加外力的应变振幅对衰减的影响,认为岩石在循环荷载作用下的衰减与应变振幅成正比,提出的衰减b值反映了岩石在循环荷载作用下衰减的程度. 岩石的衰减和滞后存在密切的关系,通过饱和岩石的宏观行为,探讨了饱和岩石在循环荷载下的滞后和衰减现象的微观机理,认为孔隙流体流动在岩石的滞后和衰减中起着重要作用,岩石内部的颗粒接触粘合和黏滑摩擦可能是孔隙岩石在循环荷载作用下产生滞后和衰减的原因. 相似文献
15.
碳酸盐岩孔隙结构类型复杂多样,当地震波经过含有不同孔隙结构的流体饱和岩石后往往会产生不同的波频散和衰减特征,这使得根据波的不同响应特征来推断碳酸盐岩的孔隙结构类型,甚至孔隙流体性质信息成为可能.本文针对白云岩、灰岩以及人工碳酸盐岩样品开展了跨频段（超声+低频）实验测量和理论建模,探索碳酸盐岩的孔隙结构类型和孔隙流体对模量频散和衰减的影响机制.首先根据铸体薄片、扫描电镜的图像对碳酸盐岩样品进行了孔隙结构类型分析,并将样品主要分为裂缝型、裂缝-孔隙型、孔洞型三类,然后测量了相应样品完全饱和流体后在不同围压下的模量频散与衰减.在完全饱和甘油并处于低围压时,裂缝型与孔洞型样品均出现一个衰减峰,分别位于1 Hz与100 Hz附近,而裂缝-孔隙型样品则具有两个衰减峰,一个在1 Hz附近,另一个在100 Hz附近.裂缝型样品（裂缝主导）的衰减峰相比孔洞型样品（中等刚度孔隙主导）对应的衰减峰在低围压下幅度更大,且对围压变化更敏感.在测量数据的基础上,建立了考虑纵横比分布的软孔隙和中等刚度孔隙的喷射流模型,认为该模型能一定程度上解释裂缝型、裂缝-孔隙型、孔洞型三种类型碳酸盐岩在测量频带的频散.以上研究加深了对不同孔隙类型主导的碳酸盐岩储层地震响应特征的认识,对储层预测工作的进一步精细化具有重要意义. 相似文献
16.
Comparative review of theoretical models for elastic wave attenuation and dispersion in partially saturated rocks 总被引：1，自引：0，他引：1
J. Toms T.M. Müller R. Ciz B. Gurevich 《Soil Dynamics and Earthquake Engineering》2006,26(6-7):548-565
Saturation of porous rocks with a mixture of two fluids (known as partial saturation) has a substantial effect on the seismic waves propagating through these rocks. In particular, partial saturation causes significant attenuation and dispersion of the propagating waves, due to wave-induced fluid flow. Such flow arises when a passing wave induces different fluid pressures in regions of rock saturated by different fluids. As partial fluid saturation can occur on different length scales, attenuation due to wave-induced fluid flow is ubiquitous. In particular, mesoscopic fluid flow due to heterogeneities occurring on a scale greater than porescale, but less than wavelength scale, is responsible for significant attenuation in the frequency range from 10 to 1000 Hz.Most models of attenuation and dispersion due to mesoscopic heterogeneities imply that fluid heterogeneities are distributed in a periodic/regular way. In 1D this corresponds to periodically alternating layering, in 3D as periodically distributed inclusions of a given shape (usually spheres). All these models yield very similar estimates of attenuation and dispersion.Experimental studies show that mesoscopic heterogeneities have less idealized distributions and that the distribution itself affects attenuation and dispersion. Therefore, theoretical models are required which would simulate the effect of more general and realistic fluid distributions.We have developed two theoretical models which simulate the effect of random distributions of mesoscopic fluid heterogeneities. The first model assumes that one fluid forms a random ensemble of spherical inclusions in a porous medium saturated by the other fluid. The attenuation and dispersion predicted by this model are very similar to those predicted for 3D periodic distribution. Attenuation (inverse quality factor) is proportional to ω at low frequencies for both distributions. This is in contrast to the 1D case, where random and periodically alternating layering shows different attenuation behaviour at low frequencies. The second model, which assumes a 3D continuous distribution of fluid heterogeneities, also predicts the same low-frequency asymptote of attenuation. However, the shapes of the frequency dependencies of attenuation are different. As the 3D continuous random approach assumes that there will be a distribution of different patch sizes, it is expected to be better suited to modelling experimental results. Further research is required in order to uncover how to relate the random functions to experimentally significant parameters. 相似文献
17.
为研究裂缝、裂隙介质中波致流引起的衰减,将裂缝看作背景孔隙岩石中非常薄且孔隙度非常高的层状介质,并等价成White周期层状模型.分别考虑不同类型的裂隙和孔隙之间的挤喷流影响,结合改进的Biot方程,推导得到裂缝裂隙介质的刚度与频率的关系.当缝隙中饱含流体时,介质的衰减和速度频散受裂缝、孔隙之间和裂隙、孔隙之间流体流动的显著影响.在低频极限下,裂缝裂隙介质的性质由各向异性Gassmann理论和挤喷流模型获得;而在非常高的频率时,由于缝隙中的压力来不及达到平衡,波致流的影响可忽略.分析表明,裂隙密度主要影响波的衰减,而裂隙纵横比主要控制优势衰减频率和速度显著变化的频率范围;由于不同裂隙的衰减机制不同,衰减和速度频散大小有所差异,但基本趋势相同. 相似文献
18.
Rock physics modeling of heterogeneous carbonatereservoirs： porosity estimation and hydrocarbon detection 总被引：1，自引：1，他引：0
Hao Yu Jing Ba Jose Carcione Jin-Song Li Gang Tang Xing-Yang Zhang Xin-Zhen He Hua Ouyang 《应用地球物理》2014,11(1):9-22
In heterogeneous natural gas reservoirs, gas is generally present as small patch-like pockets embedded in the water-saturated host matrix. This type of heterogeneity, alsocalled ＂patchy saturation＂, causes significant seismic velocity dispersion and attenuation. Toestablish the relation between seismic response and type of fluids, we designed a rock physicsmodel for carbonates. First, we performed CT scanning and analysis of the fluid distributionin the partially saturated rocks. Then, we predicted the quantitative relation between the waveresponse at different frequency ranges and the basic lithological properties and pore fluids.A rock physics template was constructed based on thin section analysis of pore structuresand seismic inversion. This approach was applied to the limestone gas reservoirs of the rightbank block of the Amu Darya River. Based on poststack wave impedance and prestack elasticparameter inversions, the seismic data were used to estimate rock porosity and gas saturation.The model results were in ~ood a~reement with the production regime of the wells. 相似文献
19.
The presence of fractures in fluid‐saturated porous rocks is usually associated with strong seismic P‐wave attenuation and velocity dispersion. This energy dissipation can be caused by oscillatory wave‐induced fluid pressure diffusion between the fractures and the host rock, an intrinsic attenuation mechanism generally referred to as wave‐induced fluid flow. Geological observations suggest that fracture surfaces are highly irregular at the millimetre and sub‐millimetre scale, which finds its expression in geometrical and mechanical complexities of the contact area between the fracture faces. It is well known that contact areas strongly affect the overall mechanical fracture properties. However, existing models for seismic attenuation and velocity dispersion in fractured rocks neglect this complexity. In this work, we explore the effects of fracture contact areas on seismic P‐wave attenuation and velocity dispersion using oscillatory relaxation simulations based on quasi‐static poroelastic equations. We verify that the geometrical and mechanical details of fracture contact areas have a strong impact on seismic signatures. In addition, our numerical approach allows us to quantify the vertical solid displacement jump across fractures, the key quantity in the linear slip theory. We find that the displacement jump is strongly affected by the geometrical details of the fracture contact area and, due to the oscillatory fluid pressure diffusion process, is complex‐valued and frequency‐dependent. By using laboratory measurements of stress‐induced changes in the fracture contact area, we relate seismic attenuation and dispersion to the effective stress. The corresponding results do indeed indicate that seismic attenuation and phase velocity may constitute useful attributes to constrain the effective stress. Alternatively, knowledge of the effective stress may help to identify the regions in which wave induced fluid flow is expected to be the dominant attenuation mechanism. 相似文献
20.
Laboratory data on dry and saturated rocks show that pore fluid has the most important effect on rock attenuation. It is known
that viscous and inertial coupling between the frame of a porous rock and its pore fluid dissipates seismic energy by conversion
to heat and hence cause attenuation. We show that attenuation peaks, in saturated rock have the same property as that of typical
thermally activated relaxations. In the frequency domain, a plot of attenuation versus frequency shows an obvious systematic
shift to higher frequencies with increasing temperatures. Similarly, the attenuation versus temperature curve moves to higher
temperature with increasing frequencies. The attenuation peaks are somewhat broader than that for a Zener relaxation. A Cole-Cole
distribution of relaxation times closely matches the attenuations. This behavior can be explained theoretically by local flow
mechanisms. 相似文献