共查询到19条相似文献，搜索用时 140 毫秒
1.
Based on the data recorded by the observation network during the intensive excitation period from November to December 2015 at Binchuan Earthquake Signal Transmitting Seismic Station (BESTSS) in Yunnan Province,the noise in waveform recording is removed by S-transform template filtering method,and the azimuth of airgun signal propagation is calculated and analyzed from the horizontal waveform recordings. The results show that:① the azimuth angle of airgun signal after propagation is sensitive to stress change,and can clearly reflect the diurnal variation of tidal stress,which can be used to monitor the change of stress state in crustal medium;② the azimuth angle of airgun signal in some stations has changed abruptly after propagation on December 4,which may be related to the change of airgun source;③ five-shot superposition or fivepoint smoothing of azimuth angle of single shot are carried out for airgun signals in stations far away from epicenter,and results show that azimuth angle from superposition or smoothing is more stable and has clear diurnal variation characteristics after propagation. 相似文献
2.
In order to study the excitation of large-volume airgun source with different combinations in Hutubi, Xinjiang,China,we conducted a targeted experiment. The method of time-frequency analysis is used to study the signals recorded by a seismometer on the shore of the excited pool, and it is concluded that different gun combinations will lead to different frequency of bubble pulse signals. Besides, linear combination method is used to analyze the signal-to-noise ratios of signals excited by different gun combinations which was recorded by seismic stations around the airgun source. In order to improve the signal-to-noise ratios, it is more effective to increase the activation energy (the number of excited guns at the same time) than to stack the excited signals with smaller energy repeatedly. 相似文献
3.
The signal excited by the airgun source is weak, and is easily affected by human motion noise, instrument failure, and earthquake and blasting events, resulting in insufficient utilization of the amplitude information of the airgun signal. The effective removal of interference and the preservation of true amplitude information of the signal is difficult in airgun signal processing. Based on the randomness of noise and the highly repetitive characteristics of airgun signals, we propose probability data screening method. The airgun data from experiments conducted in the Ansha Reservoir and Shanmei Reservoir in Fujian Province in June, 2017 are taken as the research object to assess the effect in practical applications. The results show that the probability data screening method can automatically reject multiple interferences and effectively preserve the amplitude information of the signal by screening out large amplitude records in appropriate proportions. Compared with direct linear superposition, the probability-related linear superposition method can effectively reduce the impact of abnormal interference, and significantly improve the quality of the observed data. 相似文献
4.
Repeating airgun sources are eco-friendly sources for monitoring the changes in the physical properties of subsurface mediums, but their signals decay quickly and are buried in the noises soon after traveling short distances. Stacking waveforms from different airgun shots recorded by a single seismic station (shot stacking) is the most popular technique to detect weak signals from noisy backgrounds, and has been widely used to process the data of Fixed Airgun Signal Transmission Stations (FASTS) in China. However, shot stacking sacrifices the time resolution in monitoring to recover a qualified airgun signal by stacking many shots at distance stations, and also suffers from persistent local noises. In this paper, we carried out several small-aperture seismic array experiments around the Binchuan FAST Station (BCFASTS) in Yunnan Province,China, and applied the array technique to improve airgun signal detection. The results show that seismic array processing combining with shot stacking can suppress seismic noises more efficiently, and provide better signal-to-noise ratio (SNR) and coherent airgun signals with less airgun shots. This work suggests that the array technique is a feasible and promising tool in FAST to increase the time resolution and reduce noise interference on routine monitoring. 相似文献
5.
The signal-to-noise ratio （SNR） of seismic reflection data in many areas is rather poor and conventional two-dimensional filters designed to suppress noise with different moveout from the signal tend to generate artifacts. We have extended a method of multichannel filtering, based on the hypothesis that signals on adjacent channels are similar, for enhancing the SNR on stacked sections. Using only the mid-range frequencies where the SNR is highest, the event trend is found for overlapping windows on the section and the average signal vector is calculated. Then the data from the full bandwidth section are projected onto the spatially varying unit similarity vectors and the results are merged for the overlapping windows. Application of the method to synthetic data containing steeply dipping events and to a stacked section for a marine 2D line has produced good results. The modifications we have introduced carry a small overhead in computing time but they should enable the method to be used effectively even on sections containing steep dips. 相似文献
6.
低信噪比转换波地震资料静校正(英文) 总被引：1，自引：0，他引：1
Converted waves have slow velocity and low signal-to-noise ratio. It is also difficult to pick first-breaks and bin the common-conversion-points （CCP）. Some statics methods, which work well for P-wave data, can＇t be effectively used for solving convertedwave statics problems. This has become the main obstacle to breakthroughs in convertedwave data processing. To improve converted-wave static corrections, first, a statics method based on the common-receiver-point （CRP） stack is used for the initial receiver static correction to enhance the coherency of the CRP stack. Second, a stack-power-maximization static correction which improves the continuity of the CCP stack is used for detailed receiver statics. Finally, a non-surface-consistent residual moveout correction of the CCP gathers is used to enhance the stack power of reflection signals from different depths. Converted-wave statics are solved by the joint use of the three correction methods. 相似文献
7.
XIANG Y YANG Runhai WANG Bin ZHOU Yunyao LU Yongqing WU Huan QI Junwei PENG Jing 《中国地震研究》2019,33(2):336-353
Because of the different excitation conditions of the airgun source, there will be subtle differences in airgun signals. Travel time variation of airgun signals often mix into source information which can''t fully reflect the evolution of the medium. This article uses the airgun signals from the Binchuan Transmitting Seismic Station to analyze the airgun signal''s characteristics of phase and correlation. We conducted a comparative analysis of the effects of the pair difference method and the deconvolution method on eliminating the influence of the excitation conditions in travel time variation. The results show that:(1) The pressure pulse and its subsequent wave of airgun source wavelet are less affected by excitation conditions that we can use it to obtain high-precision excitation moments. (2) Deconvolution can improve the correlation of the airgun signal. (3) The pair difference method can''t eliminate the influence of excitation conditions in travel time variation. Deconvolution can reduce excitation condition interference and the influence of the excitation condition in the travel time variation after deconvolution of the vertical signal is significantly reduced. 相似文献
8.
Weak Seismic Signal Extraction Based on the Curvelet Transform 总被引：1，自引：1，他引：0
Seismic signal denoising is a key step in seismic data processing. Airgun signals are easy to be interfered with by noise when it travels a long distance due to the weak energy of active source signal of the airgun. Aiming to solve this problem, and considering that the conventional Curvelet transform threshold processing method does not use the seismic spectrum information, we independently process the Curvelet scale layer corresponding to valid data based on the characteristics of the Curvelet transform of multi-scale, multi-direction and capable of expressing the sparse seismic signals in order to fully excavate the information features. Combined with the Curvelet adaptive threshold denoising the algorithm, we apply the Curvelet transform to denoising seismic signals while retaining the weak information in the signal as much as possible. The simulation experiments show that the improved threshold denoising method based on Curvelet transform is superior to the frequency domain filtering, wavelet denoising and traditional Curvelet denoising method in detailed information extraction and signal denoising of low SNR signals. The calculation accuracy of the relative wave velocity variation of underground medium is improved. 相似文献
9.
This paper proposes the application of dynamic programming method to calculate the relative change of wave velocities and compares its similarities and differences with the cross-correlation delay estimation method based on interference. The results show that:①the trend of wave velocities obtained by cross-correlation method and dynamic programming method are consistent. Besides,it is considered that the calculated result using cross-correlation delay method is reliable.② Compared with the cross-correlation delay method,the calculated result of the dynamic programming method has a magnifying effect and is more sensitive to small disturbances.③ Under ideal conditions,the wave velocity change trend calculated by P-wave and S-wave phase should be consistent. In addition,the cross-correlation delay method is used to calculate the wave velocity change.Under appropriate conditions,the process of recovering from the suspected wave velocity before the M_L1. 1 earthquake near the airgun source can be observed. 相似文献
10.
Based on the 2016 airgun experimental data of the Fujian Nanyi reservoir, we adopted the frequency domain water-level deconvolution method and cross-correlation time delay detection technique to study the influence of level scaling factor and the background noise level of the station on deconvolution calculation results, and analyze the effect of deconvolution on eliminating the influence of the source caused by different air-gun pressures. The results show that:(1) When the level scaling factor is smaller, the signal to noise ratio of the waveform after the deconvolution is smaller, and when the level scaling factor is over smaller, the identification error of travel time is greater. (2) When the SNR of the station record is higher, the recognition accuracy of travel time is higher, the influence of SNR on the reference station record is far greater than the far station, when the SNR of the far station record is more than 10, the error of travel time is within 6ms, but when the SNR of the reference station record is 30, the travel time error may reach to 20ms. (3) When the airgun source difference is big, the frequency domain water-level deconvolution method has better effect on eliminating the source influence, but the method error may be introduced when the source difference is small. 相似文献
11.
基于安砂水库气枪震源实验资料,采用线性叠加、频谱白化叠加和相位加权叠加三种常用叠加技术进行处理,从信噪比、波形相关性和震相走时差等方面,分析评估三种叠加方法的实际应用效果。结果表明:(1)相位加权叠加方法提高信噪比的能力最强,但是与线性叠加一样,两者都无法有效地消除强干扰,而频谱白化则可以削弱强干扰的影响,有利于信号准确识别;对低信噪比波形,频谱白化提高信噪比的效果优于线性叠加,反之亦然。(2)以线性叠加结果为参考,相位加权的相关性高,走时差基本为零,但波形中较小幅值的信号可能会被压制,影响小幅值波形信号的判别;频谱白化在台站信噪比高时,波形相关性较差,且存在一定走时差,可能出现震相到时前的波形被放大,使震相初至变得模糊,影响到时拾取精度。 相似文献
12.
宽频带地震观测数据中有效信号和干扰噪声经常发生混频效应,常规的频率域滤波方法很难将二者分离.地震波信号属于时变非平稳信号,时频分析方法能够同时得到地震波信号随着时间和频率变化的振幅和相位特征,S变换是其中较为高效的时频分析工具之一.本文以S变换为例,提出了基于相位叠加的时频域相位滤波方法.与传统叠加方法相比,相位叠加方法对强振幅不敏感,对波形一致性相当敏感,更加利于有效弱信号信息的检测.时频域相位滤波方法滤除与有效信号不相干的背景噪声,保留了相位一致的有效信号成分,显著提高了信噪比.运用理论合成的远震接收函数数据和实际的宽频带地震观测数据检验结果显示该方法较传统的带通滤波方法相比,即使在信噪较低且混频严重条件下,时频域相位滤波方法的滤波效果依然很明显,有助于识别能量较弱的有效信号. 相似文献
13.
地震台阵是为了监测核爆而发展起来的一种地震观测系统。近年来,地震台阵被推广到地球内部速度间断面的研究中并极大地推动了地震学的发展。本文主要介绍处理台阵资料的技术方法,如聚束、倾斜叠加、N次根叠加、频率波数法以及相位加权叠加等,并讨论各种方法的优缺点。在提取微弱但相关信号方面,重点讨论相位加权叠加方法及现有的研究成果。结果表明,这些方法都在不同程度上提高了记录的信噪比,高质量的台阵数据使得地球内部速度结构的成像研究更加精细。 相似文献
14.
气枪震源资料反褶积方法及处理流程研究 总被引：5，自引：5，他引：0
气枪震源具有极高的可重复性，可用于地下介质变化的监测。但不同工作条件下气枪震源产生的信号会存在细微差异，反褶积方法能在一定程度上消除由震源变化引起的记录信号变化。为了去除气枪震源子波信号，获取气枪源到台站之间的格林函数，通常需要选取一种恰当的方法对地震波形数据进行反褶积处理。频率域水准反褶积和时间域迭代反褶积是在接收函数等领域已被广泛使用的2种反褶积方法。本文以云南宾川主动源资料为例，对比了利用这2种方法处理气枪震源资料的效果，结果表明：在计算效率方面，频率域水准反褶积方法更具优势；在处理结果的信噪比方面，时间域迭代反褶积方法表现更好，P波初至也更清晰。此外，进一步讨论了在多炮资料的处理过程中反褶积和叠加等操作的顺序问题，最后提出了从气枪震源资料中提取气枪源到台站之间的格林函数的一般流程。 相似文献
15.
地球深部结构探测是地球物理学的核心领域,而地震体波可以深入地球内部且分辨率较高,是研究地球内部结构不可或缺的技术手段。基于背景噪声提取高信噪比体波信号技术的迅速发展,极大地促进了地震学的发展和应用范围,使其在地球深部结构成像、城市浅层空间探测等领域日益发挥出重要作用。本文详细综述了如何利用地震干涉法及台阵处理技术提取出用于研究不同探测尺度（局部、区域、全球）的各类体波信号。其中,地震干涉法通过对地震台站记录到的波形信号进行互相关,抵消掉重合的射线路径,最后得到台站对之间的地震记录;而台阵处理方法是基于接收器台阵发展起来的数据处理手段,该技术不仅能够进一步提高信噪比（SNR）,而且能够获得方位信息。一般来讲,背景噪声中包含的体波信号能量远低于面波信号能量,提取难度大。本文着重介绍了Bin-叠加法、双波束方法（DBF）以及相位加权叠加法（PWS）,并对3种方法的适用条件进行了总结。 相似文献
16.
The relative merits of a 48-gun, 9324 cu. in. (153 litre) airgun array and a 200 kg explosive source are considered for the purposes of long-range (0–400 km) refraction seismic work, with particular reference to traveltime modelling. Theoretical source calculations indicate that in the frequency range 2.5–12.0 Hz, the airgun source will produce an RMS pressure ∼ 8% of that produced by the explosive source and an initial burst pressure ∼17% of that produced by the explosive source. Observed data support these calculations at short ranges and illustrate the greater attenuation of the airgun signal with range due to its lack of very low frequency (< 5 Hz) content. At short offsets, the airgun array provides a preferable seismic source to the explosives, due to densely spaced shots and a consistent waveform resulting in excellent trace-to-trace coherence. With increasing offsets, it may be necessary to stack the airgun data to enhance its signal-to-noise ratio: here we use a 4-fold stack. Large explosive shots, although more powerful, produce a less consistent waveform and are more widely spaced due to operational constraints. The offset at which airguns provide a preferable source is dependent on the ambient noise. This practical comparison of real sources demonstrates that, even without advanced processing, a well-tuned airgun array may provide a preferable source to explosives at offsets up to 160 km, under favourable experimental conditions. 相似文献
17.
大量研究证明CRS叠加能提高地震勘探的信噪比，但是能否提高分辨率的关键在于如何确定CRS叠加孔径.本文详细探讨了地震波反射过程中菲涅耳带的特征，认为起伏地形下菲涅耳带可以采用椭圆予以近似，在此基础上提出了一种通过菲涅耳带来确定CRS叠加孔径的方法，并应用于泌阳凹陷陡坡带的地震剖面.结果表明，由于菲涅耳带确定的叠加范围使地震信号的能量达到最佳，相对于CMP叠加，菲涅耳带CRS叠加同时提高了地震资料的信噪比和分辨率，特别显示了中深部较弱的地震信息，而常规的CRS叠加则只在于提高资料的信噪比和改善浅部的地震信息. 相似文献
18.
叠加甘肃和青海数字测震台网记录到的甘肃祁连山大容量气枪连续激发的大量观测波形。结果显示,单次激发的气枪震源信号最远可以在距气枪震源304km的古浪台(GLT)识别,通过110次叠加的信号最远可以追踪到412km的安西台(AXX),4 600次叠加的信号最远可以在距气枪震源677km的乌图美仁台站(WTM)观测到。研究结果可为提高甘肃祁连山大容量气枪主动源观测系统的监测能力和微弱信号的提取能力,探讨祁连山区域内部介质速度变化等工作提供重要的科学意义。 相似文献
19.
大容量气枪震源激发探测因具绿色环保、传播距离远和高度重复性等特点成为地下介质探测的新方法，利用其进行地下介质物性变化高精度探测，则对不同激发条件下气枪传播信号的一致性提出要求。本文选取了祁连山主动源不同枪组（4支和3支气枪）在激发环境一致情况下分别激发时各远台波形记录，通过信号叠加、互相关及频谱分析等方法，对比分析了各台站记录的不同枪组激发信号，及其与震中距的关系，并讨论了不同枪组激发对地下介质走时变化观测的影响。结果表明：（1）不同枪组的激发信号波形相关度随震中距增大而降低，信号震相随激发能量有微弱的变化，震中距超过50 km后其变化几乎分辨不出；（2）远台接收信号的能量大小随主动源激发能量变化，各台站能量变化主要体现在优势频率范围内；（3）接收台站台基越坚固不同激发能量均方根振幅比越小；（4）叠加一定数量的波形可以有效提高远台记录信号的信噪比，增加气枪激发能量则相对更容易提高信号信噪比。 相似文献