首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 15 毫秒
1.
Using a large set of rainfall–runoff data from 234 watersheds in the USA, a catchment area‐based evaluation of the modified version of the Mishra and Singh (2002a) model was performed. The model is based on the Soil Conservation Service Curve Number (SCS‐CN) methodology and incorporates the antecedent moisture in computation of direct surface runoff. Comparison with the existing SCS‐CN method showed that the modified version performed better than did the existing one on the data of all seven area‐based groups of watersheds ranging from 0·01 to 310·3 km2. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

2.
The Natural Resource Conservation Service – Curve Number (NRCS-CN) methodology is a widely used tool for estimating surface runoff, which is of prime importance in hydrological engineering, agricultural planning and management, environmental impact assessment, flood forecasting, and others fields. This article reviews the methodology and associated hydrological models used for runoff estimation along with their advantages and limitations. Furthermore, discussion focuses on the potential applications of Remote Sensing (RS) and Geographical Information System (GIS) techniques for estimating hydrological variables, such as rainfall, soil moisture and CN required for the NRCS-CN methodology, as well as future research and opportunities for improved runoff estimation at the macro scale.
EDITOR D. Koutsoyiannis

ASSOCIATE EDITOR A. Efstratiadis  相似文献   

3.
This study focuses mainly on observing urban development in Taiwan's Wu‐Tu watershed from the perspective of urban hydrological theory. An approach is proposed for developing a method for incorporating available meteorological data to define the degree of change in a runoff hydrograph for urbanizing basins. The mean rainfall was estimated using the Kriging method. For calibration, two methods of calculating the effective rainfall (the Φ‐index method and the non‐linear‐programming (NLP) method) were used as model inputs, and the optimal global parameters of the linear reservoir model were then obtained from the shuffled complex evolution (SCE) algorithm. Twenty‐six (1966–1991) and eight (1994–1997) rainfall–runoff events were used for calibration and verification, respectively. The NLP method yielded better results than the Φ‐index method, especially for multipeak rainfall–runoff events. The regression equation determined the relationship between the parameters of the model and impervious areas. A comparison based on the results of the instantaneous unit hydrograph of the study area revealed that three decades of urbanization had increased the peak flow by 27%, and the time to peak was decreased by 4 h. The study simply describes the results of the impact of imperviousness on hydrological modelling. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

4.
hydrologic models are important tools to estimate runoff from a catchment. Identification of broad based parameters of a hydrologic model for development of direct runoff hydrograph is a key issue for the modelers. Optimization and regionalization of hydrologic parameters for application of Nash’s model is investigated in this paper. Six catchments dominated by hill torrent flows were selected for this purpose. Fifty seven rainfall events were used for regionalization of parameters and about 55 events were used for validation of the results. The hydrologic parameters of the Nash Model, number of linear cascades (N) and storage coefficient (k) were determined using optimization based upon Downhill Simplex method. The data was collected by field measurements and from Water and Power Development Authority (WAPDA) Pakistan. The physical parameters of the catchments were derived from the satellite images of the watersheds with the help of ERDAS software. The performance of the model was assessed by the model efficiency. It is concluded that the conceptual Nash model can simulate direct runoff hydrograph using regional hydrologic parameters with model efficiency of 67%.  相似文献   

5.
6.
Distributed, continuous hydrologic models promote better understanding of hydrology and enable integrated hydrologic analyses by providing a more detailed picture of water transport processes across the varying landscape. However, such models are not widely used in routine modelling practices, due in part to the extensive data input requirements, computational demands, and complexity of routing algorithms. We developed a two‐dimensional continuous hydrologic model, HYSTAR, using a time‐area method within a grid‐based spatial data model with the goal of providing an alternative way to simulate spatiotemporally varied watershed‐scale hydrologic processes. The model calculates the direct runoff hydrograph by coupling a time‐area routing scheme with a dynamic rainfall excess sub‐model implemented here using a modified curve number method with an hourly time step, explicitly considering downstream ‘reinfiltration’ of routed surface runoff. Soil moisture content is determined at each time interval based on a water balance equation, and overland and channel runoff is routed on time‐area maps, representing spatial variation in hydraulic characteristics for each time interval in a storm event. Simulating runoff hydrographs does not depend on unit hydrograph theory or on solution of the Saint Venant equation, yet retains the simplicity of a unit hydrograph approach and the capability of explicitly simulating two‐dimensional flow routing. The model provided acceptable performance in predicting daily and monthly runoff for a 6‐year period for a watershed in Virginia (USA) using readily available geographic information about the watershed landscape. Spatial and temporal variability in simulated effective runoff depth and time area maps dynamically show the areas of the watershed contributing to the direct runoff hydrograph at the outlet over time, consistent with the variable source area overland flow generation mechanism. The model offers a way to simulate watershed processes and runoff hydrographs using the time‐area method, providing a simple, efficient, and sound framework that explicitly represents mechanisms of spatially and temporally varied hydrologic processes. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

7.
The Soil Conservation Service Curve Number (SCS‐CN) method is a popular rainfall–runoff model that is widely used to estimate direct runoff from small and ungauged basins. The SCS‐CN is a simple and valuable approach to quantify the total streamflow volume generated by storm rainfall, but its use is not appropriate for estimating the sub‐daily incremental rainfall excess. To overcome this drawback, we propose to include the Green‐Ampt (GA) infiltration model into a mixed procedure, which is referred to as Curve Number for Green‐Ampt (CN4GA), aiming to distribute in time the information provided by the SCS‐CN method. For a given storm, the computed SCS‐CN total net rainfall amount is employed to calibrate the soil hydraulic conductivity parameter of the GA model. The proposed procedure is evaluated by analysing 100 rainfall–runoff events that were observed in four small catchments of varying size. CN4GA appears to provide encouraging results for predicting the net rainfall peak and duration values and has shown, at least for the test cases considered in this study, better agreement with the observed hydrographs than the classic SCS‐CN method. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

8.
Rainfall input for hydrologic modelling is assumed uniformly distributed over the entire catchment. This can lead to significant errors. Investigations of areal rainfall in mountain areas are typically limited by a lack of adequate meteorological and hydrogeological records. This study focuses on areal rainfall in mountain areas within the Kaidu River Basin, China, with the aim of analyzing the influence of areal rainfall on the simulation accuracy of runoff prediction. We conducted a simulation using MIKE 11/NAM rainfall‐runoff model over 92 days of the rain season and compared the simulation error in different methods. On the basis of properties of self‐similarity degree (SSD) in analyzing the detailed characteristics of terrain, areal rainfall was calculated to model the runoff. The results of the model simulations are generally consistent with observed data, indicating that the self‐similarity topography method is able to reflect the spatial change of rainfall. This indicates that the proposed methodology is applicable for the management of water resources in mountain area. The modelling and self‐similarity topography method study allowed quantification of the spatial rainfall and provided an insight into their implications in hydrological forecasting. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

9.
The soil conservation service (now Natural Resources Conservation Service) Curve Number (SCS-CN), one of the most commonly used methods for surface runoff prediction. The runoff calculated by this method was very sensitive to CN values. In this study, CN values were calculated by both arithmetic mean (CN_C) and least square fit method (CN_F) using observed rainfall-runoff data from 43 sites in the Loess Plateau region, which are considerably different from the CN2 values obtained from the USDA-SCS handbook table (CN_T). The results showed that using CN_C instead of CN_T for each watershed produce little improvement, while replacing CN_T with CN_F improves the performance of the original SCS-CN method, but still performs poorly in most study sites. This is mainly due to the SCS-CN method using a constant CN value and discounting of the temporal variation in rainfall-runoff process. Therefore, three factors—soil moisture, rainfall depth and intensity—affecting the surface runoff variability are considered to reflect the variation of CN in each watershed, and a new CN value was developed. The reliability of the proposed method was tested with data from 38 watersheds, and then applied to the remaining five typical watersheds using the optimized parameters. The results indicated that the proposed method, which boosted the model efficiencies to 81.83% and 74.23% during calibration and validation cases, respectively, performed better than the original SCS-CN and the Shi and Wang (2020b) method, a modified SCS-CN method based on tabulated CN value. Thus, the proposed method incorporating the influence of the temporal variability of soil moisture, rainfall depth, and intensity factors suggests an accurate runoff prediction for general applications under different hydrological and climatic conditions on the Loess Plateau region.  相似文献   

10.
Using data collected at the Mero catchment during three hydrological years (2005/06–2007/08), an analysis of rainfall–runoff relationships was performed at annual, seasonal, monthly, and event scales. At annual scale, the catchment showed low runoff coefficients (23–35%), due to high water storage capacity soils as well as high runoff inter‐annual variability. Rainfall variability was the main responsible for the differences in the inter‐annual runoff. At seasonal and monthly scales, there was no simple relationship between rainfall and runoff. Seasonal dynamics of rainfall and potential evapotranspiration in conjunction with different rainfall distribution during the study years could be the key factors explaining the complex relationship between rainfall and runoff at monthly and seasonal scale. At the event scale, the results revealed that the hydrological response was highly dependent on initial conditions and, to a lesser extent, on rainfall amount. The shapes of the different hydrographs, regardless of the magnitude, presented similar characteristics: a moderate rise and a prolonged recession, suggesting that subsurface flow was the dominant process in direct runoff. Moreover, all rainfall–runoff events had a higher proportion of baseflow than of direct runoff. A cluster‐type analysis discriminated three types of events differentiated mainly by rainfall amount and antecedent rainfall conditions. The study highlights the role of the antecedent rainfall and the need for caution in extrapolating relationships between rainfall amount and hydrological response of the catchment. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

11.
Much attention has been given to the surface controls on the generation and transmission of runoff in semi‐arid areas. However, the surface controls form only one part of the system; hence, it is important to consider the effect that the characteristics of the storm event have on the generation of runoff and the transmission of flow across the slope. The impact of storm characteristics has been investigated using the Connectivity of Runoff Model (CRUM). This is a distributed, dynamic hydrology model that considers the hydrological processes relevant to semi‐arid environments at the temporal scale of a single storm event. The key storm characteristics that have been investigated are the storm duration, rainfall intensity, rainfall variability and temporal structure. This has been achieved through the use of a series of defined storm hydrographs and stochastic rainfall. Results show that the temporal fragmentation of high‐intensity rainfall is important for determining the travel distances of overland flow and, hence, the amount of runoff that leaves the slope as discharge. If the high‐intensity rainfall is fragmented, then the runoff infiltrates a short distance downslope. Longer periods of high‐intensity rainfall allow the runoff to travel further and, hence, become discharge. Therefore, storms with similar amounts of high‐intensity rainfall can produce very different amounts of discharge depending on the storm characteristics. The response of the hydrological system to changes in the rainfall characteristics can be explained using a four‐stage model of the runoff generation process. These stages are: (1) all water infiltrating, (2) the surface depression store filling or emptying without runoff occurring, (3) the generation and transmission of runoff and (4) the transmission of runoff without new runoff being generated. The storm event will move the system between the four stages and the nature of the rainfall required to move between the stages is determined by the surface characteristics. This research shows the importance of the variable‐intensity rainfall when modelling semi‐arid runoff generation. The amount of discharge may be greater or less than the amount that would have been produced if constant rainfall intensity is used in the model. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

12.
In the cold semiarid Canadian prairies, groundwater recharge is focussed under numerous topographic depressions, in which snowmelt runoff converges. Agricultural land uses on the uplands surrounding the depressions affect snow accumulation, snowmelt infiltration, evapotranspiration (ET) and soil moisture dynamics, thereby influencing snowmelt runoff and depression-focussed recharge. The objective of this study is to compare the differences in hydrological processes under two common land uses in the Canadian prairies, namely grazed grass and annual crop, and examine how they affect groundwater recharge. A short-term (3 years) paired catchment study was used for detailed observation of hydrological processes in two depressions, supplemented by a longer-term (17 years) data set covering a larger scale to quantify the differences in snowmelt runoff between the two land uses. Compared to the grazed grassland, the cropland had a shorter and more intense period of ET, and root water uptake restricted to the shallower (top 0–80 cm) soil zone. The amount of snowmelt runoff was greater in the grazed grassland primarily due to a higher amount of snow accumulation, which was dictated by differences in topography. This finding was contrary to previous studies in the Canadian prairies that indicated substantially smaller snowmelt runoff in ungrazed grassland, but was consistent with the larger-scale remote sensing results, which showed only a marginal difference between grazed grasslands and croplands. Groundwater recharge rates were estimated using the chloride mass balance method for the present condition using “modern” pore water containing tritium. The rates were similar between the grazed grassland and croplands, implying similarity in snowmelt runoff characteristics. These results suggest that groundwater recharge will continue to be focussed under depressions in the future, though the amount and seasonality of recharge may be influenced by warmer winters.  相似文献   

13.
ABSTRACT

A hybrid hydrologic model (Distributed-Clark), which is a lumped conceptual and distributed feature model, was developed based on the combined concept of Clark’s unit hydrograph and its spatial decomposition methods, incorporating refined spatially variable flow dynamics to implement hydrological simulation for spatially distributed rainfall–runoff flow. In Distributed-Clark, the Soil Conservation Service (SCS) curve number method is utilized to estimate spatially distributed runoff depth and a set of separated unit hydrographs is used for runoff routing to obtain a direct runoff flow hydrograph. Case studies (four watersheds in the central part of the USA) using spatially distributed (Thiessen polygon-based) rainfall data of storm events were used to evaluate the model performance. Results demonstrate relatively good fit to observed streamflow, with a Nash-Sutcliffe efficiency (ENS) of 0.84 and coefficient of determination (R2) of 0.86, as well as a better fit in comparison with outputs of spatially averaged rainfall data simulations for two models including HEC-HMS.  相似文献   

14.
This study presents a Geographic Information System (GIS)‐based distributed rainfall‐runoff model for simulating surface flows in small to large watersheds during isolated storm events. The model takes into account the amount of interception storage to be filled using a modified Merriam ( 1960 ) approach before estimating infiltration by the Smith and Parlange ( 1978 ) method. The mechanics of overland and channel flow are modelled by the kinematic wave approximation of the Saint Venant equations which are then numerically solved by the weighted four‐point implicit finite difference method. In this modelling the watershed was discretized into overland planes and channels using the algorithms proposed by Garbrecht and Martz ( 1999 ). The model code was first validated by comparing the model output with an analytical solution for a hypothetical plane. Then the model was tested in a medium‐sized semi‐forested watershed of Pathri Rao located in the Shivalik ranges of the Garhwal Himalayas, India. Initially, a local sensitivity analysis was performed to identify the parameters to which the model outputs like runoff volume, peak flow and time to peak flow are sensitive. Before going for model validation, calibration was performed using the Ordered‐Physics‐based Parameter Adjustment (OPPA) method. The proposed Physically Based Distributed (PBD) model was then evaluated both at the watershed outlet as well as at the internal gauging station, making this study a first of its kind in Indian watersheds. The results of performance evaluation indicate that the model has simulated the runoff hydrographs reasonably well within the watershed as well as at the watershed outlet with the same set of calibrated parameters. The model also simulates, realistically, the temporal variation of the spatial distribution of runoff over the watershed and the same has been illustrated graphically. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

15.
A new filter to separate base flow from streamflow has developed that uses observed groundwater levels. To relate the base flow to the observed groundwater levels, a non‐linear relation was used. This relation is suitable for unconfined aquifers with deep groundwater levels that do not respond to individual rainfall event. Because the filter was calibrated using total streamflow, an estimate of the direct runoff was also needed. The direct runoff was estimated from precipitation and potential evapotranspiration using a water balance model. The parameters for the base flow and direct runoff were estimated simultaneously using a Monte Carlo approach. Instead of one best solution, a range of satisfactory solutions was accepted. The filter was applied to data from two nested gauging stations in the Pang catchment (UK). Streamflow at the upstream station (Frilsham) is strongly dominated by base flow from the main aquifer, whereas at the downstream station (Pangbourne) a significant component of direct runoff also occurs. The filter appeared to provide satisfactory estimates at both stations. For Pangbourne, the rise of the base flow was strongly delayed compared with the rise of the streamflow. However, base flow exceeded streamflow on several occasions, especially during summer and autumn, which might be explained by evapotranspiration from riparian vegetation. To evaluate the results, the base flow was also estimated using three existing base‐flow separation filters: an arithmetic filter (BFI), a digital filter (Boughton) and another filter based on groundwater levels (Kliner and Knĕz̆ek). Both the BFI and Boughton filters showed a much smaller difference in base flow between the two stations. The Kliner and Knĕz̆ek filter gave consistently lower estimates of the base flow. Differences and lack of clarity in the definition of base flow complicated the comparison between the filters. An advantage of the method introduced in this paper is the clear interpretation of the separated components. A disadvantage is the high data requirement. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

16.
This paper compares the results obtained from three hydrologic techniques namely Clark, Nash and Geographical Instantaneous Unit Hydrograph. Underpinning of these models and calibration of parameters for these models was a demanding assignment which was performed by downhill simplex optimization method. A semi-arid region of Pakistan was selected for testing the models. Computer coding was prepared for all the models. SPOT maps of the study area were collected from NESPAK (National Engineering Services of Pakistan). The rainfall runoff data was taken from Punjab Irrigation and Power Department. The maps were digitized using ERDAS and Arc GIS to determine the geographic parameters of the watershed. Field surveys and measurements were used to estimate the discharge data. The shape of direct runoff hydrograph, peak flows and time to peak flow obtained from the three models were compared. The model efficiency was determined by a statistical parameter coefficient of determination. It was found that the Clark model simulated superior results in comparison with Nash and Geographical Instantaneous Unit Hydrograph models.  相似文献   

17.
We investigated the role of different hillslope units with different topographic characteristics on runoff generation processes based on field observations at two types of hillslopes (0·1 ha): a valley‐head (a convergent hillslope) and a side slope (a planar hillslope), as well as at three small catchments having two types of slopes with different drainage areas ranging from 1·9 to 49·7 ha in the Tanakami Mountains, central Japan. We found that the contribution of the hillslope unit type to small catchment runoff varied with the magnitude of rainfall. When the total amount of rainfall for a single storm event was < 35 mm, runoff in the small catchment was predominantly generated from the side slope. As the amount of rainfall increased (>35 mm), the valley‐head also began to contribute to the catchment runoff, adding to runoff from the side slope. Although the direct runoff from the valley‐head was greater than that from the side slope, the contribution from the side slope was quantitatively greater than that from the valley‐head due to the proportionally larger area occupied by the side slope in the small catchment. The storm runoff responses of the small catchments reflected the change in the runoff components of each hillslope unit as the amount of rainfall increased and rainfall patterns changed. However, similar runoff responses were found for the small catchments with different areas. The similarity of the runoff responses is attributable to overlay effects of different hillslope units and the similar composition ratios of the valley‐head and side slope in the catchments. This study suggests that the relative roles of the valley‐head and side slope are important in runoff generation and solute transport as the catchment size increases from a hillslope/headwater to a small catchment. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

18.
19.
The Soil Conservation Service curve number (CN) method is widely used for predicting direct runoff from rainfall. However, despite the extent of cultivation on hillslope areas, very few attempts have been made to incorporate a slope factor into the CN method. The objectives of this study were (1) to evaluate existing approaches integrating slope in the CN method, and (2) to develop an equation incorporating a slope factor into the CN method for application in the steep slope areas of the Loess Plateau of China. The dataset consisted of 11 years of rainfall and runoff measurements from two experimental sites with slopes ranging from 14 to 140%. The results indicated that the standard CN method underestimated large runoff events and overestimated small events. For our experimental conditions, the optimized and non‐optimized forms of the slope‐modified CN method of the Erosion Productivity Impact Calculator model improved runoff prediction for steep slopes, but large runoff events were still underestimated and small ones overpredicted. Based on relationships between slope and the observed and theoretical CN values, an equation was developed that better predicted runoff depths with an R2 of 0·822 and a linear regression slope of 0·807. This slope‐adjusted CN equation appears to be the most appropriate for runoff prediction in the steep areas of the Loess Plateau of China. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

20.
Abstract

This study investigates the characteristics of hydrograph components from a watershed in Taiwan. Hydrograph components were modelled by using a model of three serial reservoirs with one parallel reservoir. Mean rainfall was calculated by using the block kriging method. The model parameters for 38 events were calibrated by using the shuffled complex evolution optimization algorithm. The model verification was made using 18 events. Based on the study results, the following findings were obtained: (1) for single-peak events, times to peak of hydrograph components are an increasing power function of the peak time of rainfall; (2) peak discharges of hydrograph components are linearly proportional to that of total runoff, and the ratios of quick and slow runoff are approximately 83% and 17% of total runoff, respectively; and (3) the total volume of quick runoff component is 52% of total runoff and that of slow runoff is 27%.

Editor D. Koutsoyiannis

Citation Li, Y.-J., Cheng, S.-J. Pao, T.-L. and Bi, Y.-J., 2012. Relating hydrograph components to rainfall and streamflow: a case study from northern Taiwan. Hydrological Sciences Journal, 57 (5), 861–877.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号