共查询到20条相似文献，搜索用时 343 毫秒
1.
A. A. Baranov 《Izvestiya Physics of the Solid Earth》2011,47(12):1058-1070
A refined digital model of the Moho depth is constructed for the Antarctica on a uniform grid with resolution of 1° × 1°.
The model is based on seismic data. Results are presented as a digital table that defines the Moho depth (the Moho, or M)
at each point. A large volume of new data on reflection, refraction, converted and surface waves, as well as receiver functions
and data on subglacial relief, were analyzed. The new model provides far more precise and detailed information about the Moho
than the previous model. The difference in the crustal thickness between these two models may amount up to −10–±24 km. 相似文献
2.
R. A.
van
OVERMEEREN 《Geophysical Prospecting》1975,23(2):248-258
In northern Chile, which is part of the Atacama Desert, groundwater supply and storage are controlled by deep structural phenomena. Several geophysical exploration techniques were used to determine the structure and depth of the basement of a broad valley filled with unconsolidated alluvial deposits. The gravity method was applied to obtain a general picture of the basement. This was followed by seismic refraction measurements along two traverse lines which appeared to be of major interest. Additional experiments with the magnetic and the telluric methods supplemented the geophysical investigations. In this paper the results of the different geophysical methods are presented, compared, and evaluated with respect to the usefulness in arid regions. It is concluded that a complementary use of the gravity method and the seismic refraction method is a very fruitful and efficient approach for the geophysical reconnaissance of water-bearing basins in flat and arid zones like the Atacama Desert. 相似文献
3.
Francesco Visconti Luana Stefanon Carlo Camporeale Francesca Susin Luca Ridolfi Stefano Lanzoni 《地球表面变化过程与地形》2012,37(8):818-827
A new approach for the profiling of movable sediment beds in laboratory experiments is presented. It couples a triangulation laser sensor and an ultrasonic level transmitter, and allows a non‐intrusive, fast and accurate measurement of bed topography without stopping the experimental runs. The distortion of the laser beam due to the refraction at the water surface is corrected by contemporaneously measuring the elevation of the water surface through the ultrasonic level transmitter and taking advantage of geometrical relations involving the water depth, distance of the sensors from the water surface, and the angles that the emitted laser beam forms with the vertical before and after refraction. Several tests, under either still‐ or flowing‐water conditions, as well as increasing/decreasing water surface elevation, were carried out to evaluate the accuracy of the measurements. These tests indicate that good‐quality measurements are obtained for flow depths in the range 0 < D < 60 mm, typical of morphodynamic laboratory experiments. Finally, two relevant applications to movable bed experiments carried out under either lagoonal or fluvial conditions are presented that show the effectiveness of the proposed profiling technique. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
4.
本文引用超声波地震模拟实验的结果讨论了弯曲界面上折射法地震记录的特征。实验结果指出,当折射界面位于一定的深度时,时距曲线上总会出现由于界面弯曲所形成的“线圈”。而波在“线圈”上各点的强度根据曲面的几何形状而变化。当界面的曲率为零时,“线圈”成为绕射波时距曲线。 当折曲界面出现的落差较小时,使得上下棱的绕射波相迭加,“线圈”上的强度骤增,甚至达到折射波强度的5倍。从而可以根据“线圈”的动力学及运动学特征作出有关曲界面的解释。 相似文献
5.
Mapping the thickness of sediments in the Ljubljana Moor basin (Slovenia) using microtremors 总被引：2，自引：0，他引：2
The Ljubljana Moor basin is characterized by moderate bedrock topography and thicknesses of Quaternary lacustrine and fluvial
sediments ranging from 0 to 200 m. More than 65 boreholes which reached the bedrock were drilled in the area, but their distribution
in the basin is very uneven and some data from the boreholes uncertain. There are also no data on S-velocity distribution
within the basin, but seismic refraction measurements pointed out a rather uniform increase of P-velocity with depth, great
impedance contrast with the bedrock and relatively small lateral velocity variations. The microtremor horizontal-to-vertical
spectral ratio (HVSR) method was therefore applied as a complementary tool to seismic refraction survey to map the thickness
of sediments. First, microtremors were measured at the locations of boreholes which reached the bedrock and the resonance
frequencies determined. The inverse power relationship between the resonance frequency and the thickness of sediments was
then determined from 53 data pairs. The quality of the correlation is moderate due to possible heterogeneities in sediments
and possible 3D effects in some minor areas, but the obtained parameters correspond well to the values obtained in six other
European basins. Secondly, a 16 km-long discontinuous seismic refraction profile was measured across the whole basin, leaving
uncovered some larger segments where active seismic measurements were not possible. Microtremors were then measured at 64
locations along the same profile, using 250 m point spacing, without leaving any gaps. The frequency–thickness relationship
was used to invert resonance frequencies to depths. These were first validated using the results of the seismic refraction
survey, which showed good agreement, and finally used for interpolation in the segments of missing refraction data to obtain
a continuous depth profile of the bedrock. The study has shown that the microtremor method can be used as a complementary
tool for mapping the thickness of unconsolidated sediments also in areas characterized by moderate bedrock topography. As
the input data are always to some extent uncertain, it is important to have a sufficiently large number of borehole data to
establish a frequency–thickness relationship, as well as some additional independent geophysical information for its validation. 相似文献
6.
David C. Booth 《Journal of Seismology》2010,14(2):197-207
A method is presented for deriving 1-D velocity depth models from earthquake bulletin data. The models can be used as initial
models for more advanced modelling techniques such as tomographic inversion. The method is useful when there is little or
no refraction and long-range reflection survey data. The bulletin travel times are subjected to an analysis of variance, where
they are separated into source, distance, and receiving station terms. The distance terms describe the variation of travel
time with distance, and the associated trend lines allow 1-D velocity models for the crustal layers to be determined. The
velocity models provide an average crustal model for the region derived from local data. This does not include superficial
layers which are necessarily poorly determined. Earthquake bulletin P-wave data from propagation paths across three different
regions of the UK are employed to illustrate the use of the technique. 相似文献
7.
In a companion paper local transfer functions were estimated at Tecoman using earthquake and microtremor data. In this paper, the subsoil structure at this city is investigated using seismic refraction and cross-correlation of noise records as a case study. P- and S-wave refraction profiles were measured at five sites within the city. Standard analysis constrained only very shallow layers. The P-wave refraction deployment was also used to record ambient vibration. These data were processed using an extension of the SPAC (SPatial AutoCorrelation (Aki, 1957) [1]) method; cross-correlation is computed between station pairs and the results are inverted to obtain a phase velocity dispersion curve. Penetration depth was larger than that from the refraction experiments but the shear-wave velocity of the basement could not be determined. For this reason, additional microtremor measurements were made using broad band seismometers with a larger spacing between stations. The results allowed to constrain the shear-wave velocity of the basement. Site amplification computed for the final profiles compare well with observed ground motion amplification at Tecoman. The case of Tecoman illustrates that even a simple subsoil structure may require crossing data from different experiments to correctly constrain site effects. 相似文献
8.
Methods based on multi-station recordings are presented for constructing the experimental dispersion curve of Rayleigh waves. Multi-station recording permits a single survey of a broad depth range, high levels of redundancy with a single field configuration, and the ability to adjust the offset, effectively reducing near field and far field effects. A method based on the linear regression of phase angles measured at multiple stations is introduced for determining data quality and filtering criteria. This method becomes a powerful tool for on site quality control in real time. The effects of multiple modes and survey line parameters, such as near offset, receiver spacing, and offset range, are investigated. Parametric studies result in general guidelines for the field data acquisition. A case study demonstrates how to easily deploy commonplace seismic refraction equipment to simultaneously record data for P-wave tomographic interpretation and multi-station analysis of surface wave. 相似文献
9.
High-resolution X-Band radar measurements of currents,bathymetry and sea state in highly inhomogeneous coastal areas 总被引：1，自引：1，他引：0
Katrin Hessner Konstanze Reichert Jose Carlos Nieto Borge Craig L. Stevens Murray J. Smith 《Ocean Dynamics》2014,64(7):989-998
In this paper, high-resolution wave, current and water depth fields derived by marine X-Band radar are presented for a coastal region of extreme tidal currents in the presence of inhomogeneous bathymetry at the south coast of New Zealand’s North Island. The current and water depth information for the presented location covers an area of approximately 13 km2 with a spatial resolution of 225 m and an update rate of 3 min. The sea state data provides a spatial representation of coastal effects like wave shoaling and refraction forced by bathymetry and current interaction. The near-surface current measurements about 3 km off the coast show expected tidal current pattern with maximum northwest/southeast current of 1.5–2 m/s alongshore. This is in agreement with currents from the RiCOM hydrodynamic model. The spatial resolution of the observed current field exhibits in addition small-scale current features caused by the influence of the local bathymetry. These data demonstrate the insight to be gained in complex, high-energy coastal situations through the use of high-resolution remote sensing techniques. 相似文献
10.
B. MILKEREIT 《Geophysical Prospecting》1987,35(8):875-894
Interpretation techniques are presented that aim at the estimation of seismic velocities. The application of localized slant stacks, weighted by coherency, produces a decomposition of multichannel seismic data into single trace instantaneous slowness p(x, t) components. Colour displays support the interpretation of seismic data relevant to the near surface velocity structure. Since p(x, t) is directly related to stacking velocities and the depth of reflection, or bottoming points, in the subsurface, this data transformation provides a powerful tool for the inversion of reflection and refraction data. 相似文献
11.
Reflection and refraction data are normally processed with tools designed to deal specifically with either near- or far-offset data. Furthermore, the refraction data normally require the picking of traveltimes prior to analysis. Here, an automatic processing algorithm has been developed to analyse wide-angle multichannel streamer data without resorting to manual picking or traveltime tomography. Time–offset gathers are transformed to the tau–p domain and the resulting wavefield is downward continued to the depth–p domain from which a velocity model and stacked section are obtained. The algorithm inputs common-depth-point (CDP) gathers and produces a depth-converted stacked section that includes velocity information. The inclusion of long-offset multichannel streamer data within the tau–p transformation enhances the signal from high-velocity refracted basalt arrivals. Downward continuation of the tau–p transformed wavefield to the depth–p domain allows the reflection and refraction components of the wavefield to be treated simultaneously. The high-slowness depth–p wavefield provides the velocity model and the low-slowness depth–p wavefield may be stacked to give structural information. The method is applied to data from the Faeroe Basin from which sub-basalt velocity images are obtained that correlate with an independently derived P-wave model from the line. 相似文献
12.
界面和速度反射联合成像──理论与方法 总被引：3，自引：4，他引：3
依据波逆行原理重新推导了由地震波反射走时资料反演界面深度的关系式──走时对界面偏导数关系，它不仅适用于反射波，也适用于透射波．还给出了任意多个复杂界面情况下走时对界面偏导数关系的离散形式．另外，正交算子投影法被推广用来解决速度与界面的同时成像问题．数值模拟的结果表明，本文的方法是有效的． 相似文献
13.
在城市活断层探测中 ,浅层结构常常表现为强烈的非均匀性 ,界面横向强烈起伏 ,层内速度变化较大 ,传统的基于平界面均匀层模型的折射资料处理方法不能适用。研究开发能应用于复杂介质结构中折射资料处理的方法就显得十分必要。文中基于惠更斯原理 ,用波前扩张法对波场作正演计算 ,根据哈格多恩折射波前成像原理 ,在lecomte算法和Hole有限差分计算程序的基础上 ,开发出 1种复杂介质结构中折射资料的处理方法与软件 ,并用此方法处理了福州城市活断层折射探测试验中在义序完成的 2条折射剖面资料。结果表明 :探测区浅层为 3层结构 ,分别为盖层、强风化层和基岩。基岩顶界面的埋深约为 5 8～ 5 2m ,盖层P波速度变化较大 相似文献
14.
为了获得三维地震透射成像技术在活断层探测中的有效性和应用价值的评价,在银川盆地中北部布设了一个三维地震透射台阵,利用该台阵获得的基底初至折射波和莫霍界面反射波资料,采用有限差分反演、时间项反演和连续速度模型反演方法,对台阵区域基底及上地壳结构进行了分析.结果表明：研究区基底呈东西浅、中部深的界面形态,且西陡东缓,最深处大致位于芦花台至西大滩一带,埋深达7 km.芦花台断层、银川—平罗断层、黄河断层在研究区内均表现为北北东走向的速度差异条带,且断层两侧基底及沉积界面埋深存在显著变化.芦花台断层东倾,倾角较陡,延伸至研究区基底之下;银川—平罗断层倾向西,是一条超基底的隐伏断层;黄河断层西倾,延伸深度超过研究区基底.本探测结果证明,初至折射波与莫霍面反射波探测相结合的三维地震透射台阵技术能够给出研究区上地壳三维细结构图像,不仅可以揭示主要断裂的展布位置、浅部空间形态和特征,而且可以揭示断裂向基底之下的延伸状况. 相似文献
15.
Ralph Bridle Nikolai Barsoukov Mohammad Al-Homaili Robert Ley Ameerah Al-Mustafa 《Geophysical Prospecting》2006,54(6):667-680
We present a seismic Test Line, provided by Saudi Aramco for various research teams, to highlight a few major challenges in land data processing due to near‐surface anomalies. We discuss state‐of‐the‐art methods used to compensate for shallow distortions, including single‐layer, multilayer, plus/minus, refraction and tomostatics methods. They are a starting point for the new technologies presented in other papers, all dealing with the same challenging data described here. The difficulties on the Test Line are mostly due to the assumption of vertical raypaths, inherent in classical applications of near‐surface correction statics. Even the most detailed velocity/depth model presents difficulties, due to the compleX‐raypath. There is a need for methods which are based on more complex models andtheories. 相似文献
16.
Fang Shengming 《中国地震研究》2007,21(3):236-244
This paper introduces briefly the basic principles of various seismic prospecting techniques and working methods according to nationwide practices of seismic prospecting of active faults beneath big cities in recent years.Furthermore,it analyzes the application range of different seismic prospecting methods,main achievements and solved problems,and discusses the best combination of seismic exploration methods for detecting crustal structures and locating the faults used in the present stage,that is,to trace faults which are at depths of hundred of meters underground using shallow seismic investigation,to detect the faults which are above basement(at a depth of kilometers) using high resolution refraction sounding,and the deep crustal faults using combined seismic prospecting methods of reflection seismic sounding and wide-angle reflection/refraction sounding,and furthermore,to use the 3-D deep seismic sounding method to obtain 3-D velocity structures beneath urban areas.Thus,we can get information about fault attitude and distribution at different depths and a complete image of faults from their shallow part to deep part using the combined seismic exploration method.Some application examples are presented in the article. 相似文献
17.
本文描述我国滇西地区洱源-江川和遮放-宾川二条剖面的地壳结构爆破地震的研究结果。 资料分析解释的结果说明,该地区的地壳内存在四个界面:Pg、P20、P30与P40面。Pg面为结晶基底面,深度在0.3-3.5km之间,界面速度约5.90km/s。P02面为地壳上部反射面,深度在12至24km间,其界面速度约6.30-6.50km/s。该界面的下方,在大部分地段是一厚梯度层至莫霍界面。在30-35km的深处,局部地区存在弱反射界面P30。而莫霍面（即P40面）的深度在37-46km。遮放-宾川剖面的地壳平均速度约6.40km/s,莫霍界面速度为8.06km/s。但洱源-江川剖面的这两种参数分别为6.19km/s与7.75km/s,其下侧50km的深处还存在P50反射面。 遮放-宾川剖面上的怒江断裂在P40及P20面上有2.5km的深度跳跃。澜沧江断裂经过的地方,P40震相追踪中断,波形畸变。这类现象在洱源-江川剖面的几个地方也有明显反应,在元谋-绿汁江断裂处莫霍面的深度跳跃达3km,断裂还使江川炮的P40震相追踪中断。 在洱源-江川剖面的中段,发现了上地幔低速度异常带,速度值为7.75km/s。 相似文献
18.
通过在上海地区开展深、浅地震反射、地震宽角反射/折射、高分辨地震折射和大地电磁测深等联合剖面探测, 获得了该地区近地表至Moho面的精细速度结构、电性结构和深浅构造关系.结果表明, 该地区地壳可划分为上、中、下三个组成部分.其中，上地壳厚为12～14 km，波速为57～59 km/s；中地壳厚度约为10 km，波速为59～62 km/s；下地壳厚为10～11 km, 波速为62～63 km/s，Moho面深度约为32 km.剖面浅部地质构造复杂，共解释出12条特征明显的断裂.其中，除3条断裂错断结晶基底（G界面）并向下延伸至上地壳底界面外，其他断裂均在深度3～5 km以上终止或收敛于G界面之上.此外，仅在剖面西侧基底下部约13～15 km埋深处发现一厚度在2 km左右的壳内高导层.所以，在综合各方面资料后分析认为，在剖面经过地区不存在发生大地震的深部构造条件，近地表所存在的活动断层是未来产生对该区有影响地震的震源区. 相似文献
19.
为了进一步研究唐山地区深部地壳构造与唐山大地震孕育及发生的关系,国家地震局地球物理研究所在石油部物探局的协助下,于1985年1月在唐山震区完成了64km长的深反射剖面野外观测,获得了高分辨率的整个地壳结构的详细资料。分析结果表明,唐山震区内深度500m以上的沉积层十分破碎;结晶基底为前震旦纪地层,埋深2-7km不等,覆盖地层倾斜,且断层发育,其中陡河断裂为正断层,延深至6-7km,推断该断层为1976年唐山发震的重要构造之一。测线上大约21km深处普遍存在一反射层;莫霍面深度在31-32km左右,与该地区折射剖面得到的结果相当一致。 相似文献
20.
U. HIRSCHLEBER 《Geophysical Prospecting》1971,19(3):345-356
Multicover measurements in refraction shooting are comparable to long-spread reflection shooting. Of course, spread length, distance of traces and offset may be larger than in reflection shooting and depend on the, depth, the velocity and the dipping of the refractors to be detected. For later processing an equation for the refractor velocity is derived in case of flat and steep dipping refractors. The depth and the angle of dip will be computed from delay times. An outlook to digital processing is given. 相似文献