首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Downhole arrays are deployed to measure motions at the ground surface and within the soil profile, with some arrays instrumented to also record the pore pressure response within soft soil profiles during excitation. The measurements from these arrays have typically been used in conjunction with parametric and nonparametric inverse analysis approaches to identify soil constitutive model parameters for use in site response analysis or to identify averaged soil behavior between locations of measurement. The self-learning simulations (SelfSim) inverse analysis framework, previously developed and applied under total stress conditions, is extended to effective stress considerations and is employed to reproduce the measured motions and pore pressures from downhole arrays while extracting the underlying soil behavior and pore pressure response of individual soil layers. SelfSim is applied to the 1987 recordings from the Imperial Valley Wildlife Liquefaction Array. The extracted soil behavior suggests a new functional form for modeling the degradation of the shear modulus with respect to excess pore pressures. The extracted pore pressure response is dependent on the number and amplitude of shear strain cycles and has a functional form similar to current strain-based pore pressure generation models.  相似文献   

2.
We present a full waveform inversion algorithm of downhole array seismogram recordings that can be used to estimate the inelastic soil behavior in situ during earthquake ground motion. For this purpose, we first develop a new hysteretic scheme that improves upon existing nonlinear site response models by allowing adjustment of the width and length of the hysteresis loop for a relatively small number of soil parameters. The constitutive law is formulated to approximate the response of saturated cohesive materials, and does not account for volumetric changes due to shear leading to pore pressure development and potential liquefaction. We implement the soil model in the forward operator of the inversion, and evaluate the constitutive parameters that maximize the cross-correlation between site response predictions and observations on ground surface. The objective function is defined in the wavelet domain, which allows equal weight to be assigned across all frequency bands of the non-stationary signal. We evaluate the convergence rate and robustness of the proposed scheme for noise-free and noise-contaminated data, and illustrate good performance of the inversion for signal-to-noise ratios as low as 3. We finally employ the proposed scheme to downhole array data, and show that results compare very well with published data on generic soil conditions and previous geotechnical investigation studies at the array site. By assuming a realistic hysteretic model and estimating the constitutive soil parameters, the proposed inversion accounts for the instantaneous adjustment of soil response to the level and strain and load path during transient loading, and allows results to be used in predictions of nonlinear site effects during future events.  相似文献   

3.
震害资料显示，场地条件对地震动特性以及工程结构破坏程度影响显著。为减少因场地效应而造成的经济损失和社会影响，在进行场地地震反应分析时，需最大限度地减小因场地土层模型参数的不确定性引起的地震动评估偏差，为工程结构地震反应分析选取并生成适当的地震动输入。随着强震动观测技术的逐渐发展，大量可靠的钻井台阵记录为地震过程中场地观测点的动力反应提供了直接数据。以美国加州地区La Cienega钻井台阵强震动观测数据为基础，利用互相关函数，对不同强度地震作用下场地土层的平均剪切波速进行分析，并在此基础上，以Cyclic 1D为模拟平台，建立一维自由场地地震反应有限元分析模型。分析结果表明：通过钻井台阵地震动观测数据识别，得到场地平均剪切波速，能够反映该场地的动力特性，数值模拟计算结果和台阵地震动记录基本吻合，可为数值模型参数选取提供依据。  相似文献   

4.
Site response analyses must take into account the nonlinear behavior of soils. This is typically achieved using an equivalent linear approach or using numerical analyses with an appropriate constitutive model. In this work a family of hypoplastic models is proposed for use in site response analyses. These nonlinear models use a rate-type tensorial equation and are capable of reproducing plastic deformation of soils for cyclic loading under both drained and undrained conditions. A methodology for the calibration of hypoplastic parameter for dynamic loading is proposed. The hypoplastic constitutive models are implemented in a finite element code and the site response of the Lotung downhole array site is used to validate the use of hypoplastic models for site response analysis. The hypoplastic models reproduce accurately site response at the Lotung site. The advantages and disadvantages of the hypoplastic models compared to other models are discussed.  相似文献   

5.
Amplification of earthquake-induced seismic waves by soft superficial deposits often causes significant damages in the urban areas. In predicting this effect for large future earthquakes, the linear elastic response of soils is customarily assumed. To check this assumption, we have analyzed surface and downhole acceleration data from the SMART1 and SMART2 strong motion arrays in Taiwan, covering peak accelerations of up to 0·3 g. First, frequency-dependent amplification induced by the alluvial deposits at the SMART1 array was estimated using spectral ratio technique, where the records at rock site were taken as a reference motion. Statistically validated reduction in soil amplification in the strong motion relative to the weak motion in the frequency range between approximately 1 and 9 Hz was detected. Secondly, relative site responses between the Pleistocene and recent sedimentary deposits at the SMART2 array were studied. Relative amplification was shown to be clearly dependent on the excitation level. Thirdly, we compared experimentally recorded uphole/downhole spectral ratios on weak and strong ground motion with the theoretical response yielded by the geotechnical code DESRA2 which assumes hysteretic constitutive relationship of soil. Major symptoms of nonlinear ground behavior predicted by the model were found in the observed data. Back-calculation of the shear wave velocities to the depth of 47 m shows nearly 50% decrease in the strongest quakes, also accounted for by the nonlinear soil behavior.  相似文献   

6.
Soil amplification characteristics are investigated using data from the Chibaken‐Toho‐Oki earthquake and its aftershocks recorded at Chiba dense array in Japan. The frequency‐dependent amplification function of soil is calculated using uphole‐to‐downhole spectral ratio analysis, considering the horizontal components of shear wave. The identified spectral ratios consistently demonstrate the splitting of peaks in their resonance frequencies and low amplification values in comparison with a 1D model. The torsional behaviour and horizontal ground motion coupling are clarified as the reasons for these phenomena at the site. To prove the hypothesis, the torsional motion is directly evaluated using the data of the horizontal dense array in different depths at the site. The comparison between Fourier spectra of torsional motion and identified transfer functions reveals the peaks at the same frequencies. The wave equation including torsion and horizontal motion coupling is introduced and solved for the layered media by applying wave propagation theory. Using the developed model, the effects of torsional motion with horizontal motion coupling on soil transfer function are numerically examined. Splitting and low amplification at resonance frequencies are confirmed by the results of numerical analysis. Furthermore, the ground motion in two horizontal directions at the site is simulated using site geotechnical specification and optimizing the model parameters. The simulated and recorded motions demonstrate good agreement that is used to validate the hypothesis. In addition, the spectral density of torsional ground motions are compared with the calculated one and found to be well predicted by the model. Finally, the results are used to explain the overestimation of damping in back‐calculation of dynamic soil properties using vertical array data in small strain level. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

7.
Shear wave velocity–depth information is required for predicting the ground motion response to earthquakes in areas where significant soil cover exists over firm bedrock. Rather than estimating this critical parameter, it can be reliably measured using a suite of surface (non-invasive) and downhole (invasive) seismic methods. Shear wave velocities from surface measurements can be obtained using SH refraction techniques. Array lengths as large as 1000 m and depth of penetration to 250 m have been achieved in some areas. High resolution shear wave reflection techniques utilizing the common midpoint method can delineate the overburden-bedrock surface as well as reflecting boundaries within the overburden. Reflection data can also be used to obtain direct estimates of fundamental site periods from shear wave reflections without the requirement of measuring average shear wave velocity and total thickness of unconsolidated overburden above the bedrock surface. Accurate measurements of vertical shear wave velocities can be obtained using a seismic cone penetrometer in soft sediments, or with a well-locked geophone array in a borehole. Examples from thick soil sites in Canada demonstrate the type of shear wave velocity information that can be obtained with these geophysical techniques, and show how these data can be used to provide a first look at predicted ground motion response for thick soil sites.  相似文献   

8.
Seismic downhole-array data provide a unique source of information on actual soil (and overall site) behavior over a wide range of loading conditions that are not readily covered by in-situ or laboratory experimentation procedures. In this paper, free-field downhole-array seismic records are employed to identify and model the recorded response at the Lotung (Taiwan) and Treasure Island (California) sites. At Lotung, a five-accelerometer array recorded the site response during 18 earthquakes (1985–1986). The Treasure Island site was instrumented in 1992 with an array of six accelerometers that recorded a low amplitude earthquake in 1993. Using this downhole data, correlation and spectral analyses are performed to evaluate shear wave propagation characteristics, variation of shear wave velocity with depth and site resonant frequencies and model configurations. In addition, the actual seismic shear stress-strain histories are directly evaluated from the recorded downhole accelerations. These histories provide valuable insight into the mechanisms of site amplification, damping and pore-pressure build-up. Computational simulations of these case histories are performed based on the identified mechanisms of site response. In a companion paper, two additional case histories of site liquefaction are analyzed using records of downhole seismic response.  相似文献   

9.
Downhole records of seismically-induced soil liquefaction are a valuable source of information on the associated mechanisms of stiffness degradation and lateral spreading. In this paper, free-field downhole array seismic records are employed to identify and model the recorded response at Wildlife Refuge (California, USA) and Port Island (Kobe, Japan) sites. The Wildlife Refuge site was instrumented in 1982 with a two-accelerometer array and six piezometers that recorded a case of seismically induced site liquefaction. At Port Island, a four-accelerometer down-hole array recorded strong motion during the recent 1995 Hyogoken-Nanbu earthquake. This earthquake resulted in widespread liquefaction and major ground deformations at Port Island. Using the recorded downhole accelerations at these two sites, the actual seismic shear stress-strain histories are directly evaluated. These histories provide valuable insight into the mechanisms of site liquefaction and associated loss of stiffness and strength. Based on the identified dynamic soil behaviors, computational simulations of the observed seismic response are performed. Optimization techniques are employed to estimate the necessary computational modeling parameters. This document constitutes the second part of a set of two companion papers about site amplification and liquefaction.  相似文献   

10.
— In this paper, the site characteristics of the Dahan downhole array are studied by analyzing the September 21, 1999 M 7.3 Chi-Chi earthquake sequence including the main shock and some aftershocks. The four-level array (0 m, 50 m, 100 m and 200 m) is located to the north of Hualien City in eastern Taiwan. Polarization analysis is used to check the orientation errors of the seismometers at different levels of depth. If the surface instrument is chosen as reference, the angle between the major polarization axes of the surface and any downhole records is the orientation error that must be corrected for the downhole accelerographs. The orientation errors at depths of 50 m, 100 m and 200 m are 32°, 120° and –84°. After the corrections, the coherency between the surface and downhole records is substantially improved. Spectral ratio analysis shows that the predominant frequency of the Chi-Chi main shock shifts to a lower frequency. We also simulate ground motions at different depths by using the Haskell method with a linear velocity structure model. The record at surface is chosen as the input motion. Compared with the observed data, ground acceleration can be well reproduced for the aftershocks (weak-motion events) of the September 21, 1999 M 7.3 Chi-Chi earthquake. However, for the Chi-Chi main shock, the synthetic waveform cannot match well with the observation neither in amplitude nor in phase. This indicates that large ground shaking probably induced the nonlinear site effect at that time, and the model used cannot support it.Acknowledgement. The authors would like to express their thanks to Dr. L.F. Bonilla and one anonymous reviewer for their valuable suggestions. This research was supported by the National Science Council under grant number NSC 89-2921-M-194-007. The Institute of Earth Sciences, Academia Sinica supplied the strong-motion data. The support of these organizations is gratefully acknowledged.  相似文献   

11.
Records of the 1999 Chi–Chi earthquake, provided by the Dahan downhole array were analyzed, and nonlinear hysteretic stress–strain relations in the soil layers were estimated by the method previously used for studying the response of soils during the 1995 Kobe and the 2000 Tottori earthquakes. The obtained models of the soil behavior were applied for evaluating changes of the shear moduli in the soil layers and for the nonlinear identification of the soil behavior at Dahan site during the Chi–Chi earthquake. We found that reduction of the shear moduli in the soil layers did not exceed 5%, and the soil response was virtually linear. The content of the nonlinear components in the soil response was about 5% of the intensity of the response, and it was mostly due to the odd-order nonlinearities. A similarity in the stress–strain relations describing the behavior of soils during the 1995 Kobe earthquake, the 2000 Tottori earthquake, and the 1999 Chi–Chi earthquake was found, which indicates the possibility to describe the behavior of similar types of soils at different sites by similar stress–strain relations and predict soil behavior in future earthquakes.  相似文献   

12.
In order to understand the site soil response of the Xiangtang borehole seismic array under real strong ground motion, reveal the site response, verify the technique of borehole exploration, and improve the precision of in-situ test and laboratory test, this paper presents a new approach, which is composed of two methods. One is the layered site seismic response method, whose layer transform matrix is always real. The other is a global-local optimization technique, which uses genetic algorithm (GA)-simplex method. An inversion of multi-component waveforms of P, SV and SH wave is carried out simultaneously. By inverting the records of three moderate and small earthquakes obtained from the Xiangtang borehole array (2# ) site, the soil dynamic characteristic parameters, including P velocity, damping ratio and frequency-dependent coefficient b, which has not been given in previous literatures, are calculated. The results show that the soil S wave velocity of the Xiangtang 2# borehole is generally greater than that obtained from the 1994 in-situ test, and is close to the velocity of the 3# borehole, which is more than 200 m away from the 2# borehole. Meanwhile, perceptible soil nonlinear behavior under peak ground motion of about 60×10-2m/s2 is detected by the inversion analysis. The presented method can be used for studying the soil response of other borehole array sites.  相似文献   

13.
System identification (SI) methods are used to determine empirical Green's functions (EGF) for soil intervals at the Port Island Site in Kobe, Japan and in shake table model tests performed by the Port and Harbor Research Institute (PHRI) to emulate the site during the 17 January 1995 Hyogo‐ken Nanbu earthquake. The model form for the EGFs is a parametric auto‐regressive moving average (ARMA) model mapping the ground motions recorded at the base of a soil interval to the top of that interval, hence capturing the effect of the soil on the through‐passing wave. The consistency of site response at Port Island before, during, and after the mainshock is examined by application of small motion foreshock EGFs to incoming ground motions over these time intervals. The prediction errors (or misfits) for the foreshocks, the mainshock, and the aftershocks, are assessed to determine the extent of altered soil response as a result of liquefaction of the ground during the mainshock. In addition, the consistency of soil response between field and model test is verified by application of EGFs calculated from the shake table test to the 17 January input data. The prediction error is then used to assess the consistency of behaviour between the two cases. By using EGFs developed for small‐amplitude foreshock ground motions, ground motions were predicted for all intervals of the vertical array except those that liquefied with small error. Analysis of the post‐liquefied ground conditions implies that the site response gradually returns to a pre‐earthquake state. Site behaviour is found to be consistent between foreshocks and the mainshock for the native ground (below 16 m in the field) with a normalized mean square error (NMSE) of 0.080 and a peak ground acceleration (PGA) of 0.5g. When the soil actually liquefies (change of state), recursive models are needed to track the variable soil behaviour for the remainder of the shaking. The recursive models are shown to demonstrate consistency between the shake table tests and the field with a NMSE of 0.102 for the 16 m to surface interval that liquefied. The aftershock ground response was not modelled well with the foreshock EGF immediately after the mainshock (NMSE ranging from 0.37 to 0.92). One month after the mainshock, the prediction error from the foreshock modeled was back to the foreshock error level. Copyright © 2001 John Wiley Sons, Ltd.  相似文献   

14.
渤海海域软土层土对场地设计地震动参数取值具有显著影响。选取渤海中部钻孔剖面作为计算场地模型基础,分别构建软土和硬土场地模型,并通过改变软土层厚度,构造新的场地模型。采用等效线性化方法（EL法）和非线性计算方法（NL法）分别对场地模型进行地震反应分析,分析了海底软土层土对地震动参数的影响。研究结果表明:海底软土层土对地震动峰值加速度的影响显著,随着地震动输入增加,软土层放大效应减弱,减震作用逐渐增强;EL法中,软土层土对基岩反应谱的高频部分具有明显滤波作用,而NL法中,滤波作用较弱,海底面反应谱随地震动输入的增大先放大后减小;软土层土会降低设计地震动地震最大影响系数,增大特征周期。对于海域工程,特别是深基础工程抗震设计地震动参数的确定,从保守角度考虑,建立场地模型时建议删除软土层。  相似文献   

15.
Existing studies for site response analysis in geotechnical earthquake engineering have widely concentrated on the horizontal component of the ground motion. However, strong vertical ground motions have been repeatedly observed, resulting in significant vertical compression damage of engineering structures. Furthermore, for the seismic design of critical structures(e.g. large-scale dams and nuclear power plants), the ground motions in all three directions should be considered. Therefore, there is a need to investigate the site response subjected to the vertical component of the ground motion, especially for the seismic design of critical structures. Consequently, in this study, a numerical program for vertical site response analysis is proposed based on the commonly used analytical transfer function method. The proposed program is then validated against well-documented case studies obtained from the Japanese KiK-net(Kiban Kyoshin network) downhole array monitoring system. Results show that the response spectra at the ground surface are well predicted in the low frequency range(5 Hz), while discrepancies are observed in the high frequency range. However, the high frequency discrepancies do not significantly affect the overall prediction accuracy, as the overall seismic response of geotechnical structures are usually dominated by low frequency vibrations. Furthermore, the limitations in the analysis are also discussed.  相似文献   

16.
The installation of vertical downhole arrays in the field that record the soil behavior during earthquakes, has opened the opportunity of exploring another alternate method for assessing the soil dynamic properties by solving the inverse problem. This article proposes a methodology for solving this problem using spectral analysis of downhole arrays records. The one-dimensional shear wave propagation model was used, considering a homogeneous-viscoelastic medium. This methodology was applied at the site known as Central de Abasto Oficinas (CAO), which is located in the lake zone of the Mexico City. The results indicate that even relatively low frequencies have a noticeable effect on dynamic soil properties. Shear modulus increases and damping ratio lessens when the frequency rises.  相似文献   

17.
This paper presents a comparison between different techniques for evaluation of predominant periods in soft soil, for the urban area of Pereira city, Western Colombia. In this study we used microtremor and strong ground motion records obtained by a local array of seven accelerographs stations deployed in the city. Response spectra and spectral ratios have been calculated and compared with strong seismic events recorded in solid rock and soft soil stations. These observations allowed the determination of dominant response spectra for several sectors in the urban area. For the microtremor measurements and earthquake data, dominant periods were determined using interpretation of Fourier amplitude spectra and Nakamura's technique. A comparison between dominant periods obtained from strong ground motion records and those obtained from microtremor measurements show similarities, which is in the range 0.2–0.5 s. A preliminary version of a site response map for Pereira city was obtained from this analysis.  相似文献   

18.
Geotechnical downhole arrays that record seismic ground response in near-surface layers are increasingly becoming one of the best sources of information for developing, verifying, and calibrating engineering analyses and design methods. Recently, three geotechnical downhole arrays have been installed in the European side of Istanbul, Turkey with efforts of Kandilli Observatory and Earthquake Research Institute (KOERI). The existing high seismic activity of the region increases the scientific importance of these downhole arrays. Each array is composed of one accelerometer on the ground surface and three or four borehole accelerometers at various depths along the soil profile with the deepest sensor located at the engineering bedrock level (Vs > 750 m/s). The arrays also provide reference bedrock motion for Rapid Response Network composed of 55 surface instruments operated by KOERI in the west European side of city. An important aspect of this paper is to introduce the recently-completed test sites emphasizing on their potential to generate valuable data for scientific community. Preliminary analysis of the recorded data provides evidence for significant site amplification of ground motion by the surface layers. Comparisons between the recorded and modeled response indicate that Vs 30 alone is a poor indicator of the amplification potential emphasizing the importance of site-specific analyses in predicting the ground response as opposed to empirical approaches.  相似文献   

19.
研究局部场地条件对地震动影响的响嘡遥测台阵   总被引：2，自引：0，他引：2  
对原有的响嘡三维场地条件影响台阵进行了扩建改造。增设了一个深度为47m的测井,对钻孔土样进行了土动力学测试,弥补了缺乏详细土层特性资料的缺陷。新老测井观测点均架设了电话线路,实现了观测中心与台阵之间的远程监控和数据传输。已经获取的一批中小地震近场记录可以用来进行盲测研究。  相似文献   

20.
The dynamic response of a seismic soil–pile–structure interaction (SSPSI) system is investigated in this paper by conducting nonlinear 3D finite element numerical simulations. Nonlinear behaviors such as non-reflecting boundary condition and soil–pile–structure interaction modeled by the penalty method have been taken into account. An equivalent linear model developed from the ground response analysis and the modified Drucker–Prager model are separately used for soil ground. A comparison of the two models shows that the equivalent linear soil model results in an underestimated acceleration response of the structure under this ground shaking and the soil behavior should be considered as a fully-nonlinear constitutive model in the design process of the SSPSI system. It was also observed that the dynamic response of the system is greatly affected by the nonlinearity of soil–pile interface and is not sensitive to the dilation angle of the soil. Furthermore, the effect of the presence of pile foundations on SSPSI response is also analyzed and discussed.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号