共查询到19条相似文献,搜索用时 437 毫秒
1.
在对新疆北部地区地质构造、构造运动强度、历史强地震活动特征、地壳缩短速率以及局部应力场特征综合研究的基础上,将新疆北部地区划分为阿尔泰地震带、乌鲁木齐、北天山西段、中天山和东天山5个地震构造区带.通过计算上述各构造区带年应变能释放均值、折合震级、不同震级下限的地震年发生率、b值和应变加速释放模型参数m值等参数,对各构造区带中地震活动状态进行了定量分析,进而提取了各构造区带地震活动状态的特征指标,为地震趋势分析和判定提供了定量的依据. 相似文献
2.
3.
4.
华北近期多项地震活动性参数的时空扫描特征与构造活动 总被引:1,自引:0,他引:1
本文旨在探索利用中小地震群体活动特征,研究数年尺度的地壳构造活动状态的方法。为此,以华北为例,选取地震频度N,地震应变E~(1/2),地震活动度A、A(b)指数及地震b值5个地震活动性参数,对该区1970——1987年M_L≥2.0级地震进行时间域及空间域扫描。结果表明,该区9次M_s≥5.8级地震前后,各地震活动性参数在震中周围地区经历阶段演化过程,且具有不同的组合关系。而在3个没有发生过6级左右以上地震的对比区则无相应的演变;各参数的空间等值线(或等密度线)较清晰地勾画出近二十年来华北地区构造活动的基本格架,而1975年海城7.3级地震和1976年唐山7.8级地震前后,各参数的空间组合关系亦发生相应的转化。进而,本文给出了利用多项地震活动性参数的时空组合特征推断数年尺度构造活动状态的主要标志,并初步讨论了华北地区近期构造活动概况。 相似文献
5.
6.
利用ldquo;非零导数显著性rdquo;检验方法, 分析了中国大陆东西部地区及青藏高原、新疆、东北、华北、华南以及台湾构造区内地震活动广义应变释放时间分布的不均匀结构. 结果表明,当广义地震应变指数eta;取较小值时,新疆、华南、东北以及台湾构造区地震活动自1970年以来总体上呈长期增强趋势, 而青藏高原与华北构造区则呈长期减弱的态势;在较小的时间窗宽情况下,各构造区均存在多尺度成丛特征,显示出地震活动在一定的尺度层次下的强弱交替现象. 但当该eta;取较大值时,除青藏高原与台湾构造区在某些尺度时间窗宽内存在某些时段趋势性变化外,其它各构造区广义地震应变释放时间分布均无统计学意义上的显著变化. 相似文献
7.
基于区域构造背景、应力场状态及动力学环境等,将青藏高原北部地区划分为4个相对独立的统计单元,即祁连山地震带、甘东南地区、柴达木一共和地块及库玛地震带.通过地震频度和b值拟合确定了各个地区不同下限震级的地震目录完整性起始时间;确定了各构造单元中强以上地震活跃与平静交替活动的特征;定量计算了在平均状态中强以上地震活动特征参数及平静阶段与活跃阶段地震活动特征参数;分别获得了各个区域在平均、活跃与平静状态下的小震活动状态参数. 相似文献
8.
9.
10.
对溧阳地震台体应变观测资料变化形态、观测质量和观测精度、潮汐因子中误差、地震波记录能力等参数进行分析,采用固体潮汐残差矢量分析方法进行分析,对该台2010—2015年观测资料进行分析,发现体应变能记录到全球不同地区、不同震级的同震波,波形清晰,为分析预报人员进行地震研究提供依据。 相似文献
11.
Based on the studies of earthquake activity, tectonic movement, crustal shortening rate, fault activity, local stress field and historical characteristics of strong earthquake activities in Xinjiang, we divide the south part of Xinjiang into 4 seismotectonic zones, namely, the eastern segment of south Tianshan seismic belt, the Kalpin block, the Kashi-Wuqia junction zone, and the west Kunlun Mountains seismic belt. Using earthquake catalogues from Xinjiang since 1900, and on the basis of integrity analysis of earthquake records in different magnitude ranges, the seismicity state of different seismotectonic zones is analyzed quantificationally by calculating the mean value of annual strain energy release, annual rate of earthquakes with different lower limits of magnitude, b-value, and the parameter m of accelerating strain release model. The characteristic indexes of seismicity state for each of the seismic tectonic zones are then determined, which provide a quantitative basis for earthquake tendency analysis and judgment. 相似文献
12.
FOCAL MECHANISM SOLUTION AND TECTONIC STRESS FIELD CHARACTERISTICS OF THE MIDDLE TIANSHAN MOUNTAINS,XINJIANG 下载免费PDF全文
ZHANG Zhi-bin ZHAO Xiao-cheng REN Lin 《地震地质》1979,42(3):595-611
The middle part of the Tianshan Mountains in Xinjiang is located in the north-central part of the Tianshan orogenic belt, between the rigid Tarim Basin and Junggar Basin. It is one of the regions with frequent deformation and strong earthquake activities. In this paper, 492 MS>2.5 earthquake events recorded by Xinjiang seismograph network from 2009 to 2018 were collected. The MS3.5 earthquake was taken as the boundary, the focal mechanism solutions of the earthquake events in this region were calculated by CAP method and FOCEMEC method respectively. At the same time the focal mechanism solutions of GCMT recorded historical earthquake events in this region were also collected. According to the global stress map classification standard, the moderate-strong earthquakes in the region are mainly dominated by thrust with a certain slip component, which are distributed near the combined belts of the Tarim Basin, Junggar Basin, Turpan Basin and Yili Basin with Tianshan Mountains. The thrust component decreases from south to north, while the strike-slip component increases. The spatial distribution characteristics of the tectonic stress field in the middle section of the Tianshan Mountains in Xinjiang are obtained by using the damped regional-scale stress field inversion method. The maximum principal compressive stress in axis the study area rotated in a fan shape from west to east, the NW direction in the western section gradually shifted to NE direction, its elevation angle is nearly horizontal, in the state of near horizontal compression. The minimum principal compressive stress axis is nearly EW, and the elevation angle is nearly vertical. Influenced by large fault zones such as Kashi River, Bolhinur, Nalati, Fukang, the southern margin of the Junggar and the north Beiluntai, the local regional stress field presents complex diversity. Under the influence of the northward extrusion of Pamir and Tarim blocks, the whole Tianshan is shortened by compression, but its shortening rate decreases from south to north and from west to east, the stress shape factor increases gradually from west to east, the intermediate principal compressive stress axis exhibits a change in compression to extension. There are some differences in the characteristics of tectonic stress field between the north and south of Tianshan Mountains. The regional maximum principal compressive stress axis is 15° north by east on the south side, while it is nearly NS on the north side. The deformation of the Tianshan Mountains and the two basins on both sides is obviously larger than that in the inside of the mountain. Changes in the crustal shortening rate caused by the rotation of the rigid Tarim block and Junggar block to the relatively soft Tianshan block, as well as the uplifts of Borokonu and Bogda Mountains, the comprehensive influence of the material westward expansion constitute the stress field distribution characteristics of the north and south sides of the middle section of Tianshan Mountains. The recent two MS6.6 earthquakes in the region caused the regional stress field to rotate counterclockwise. The post-earthquake stress field and the main source focal mechanism solution tend to be consistent. The seismic activity in the study area is week in the south and strong in the north. The focal depth is about 20km. Most strike-slip earthquakes occur near the junction belt of the Tianshan and Junggar Basin. 相似文献
13.
统计分析了中国大陆1900年以来所有发生在东北的5级以上的学震及其与中国大陆26个地震带6级以上(其中东部为5级以上)地震活动的相关性。结果表明7级以上深震有可能引发中国大陆地震活动进入应变能大释放阶段。其中与东北深震统计相关最高的地震带是:金沙江地震带、南天山地震带澜沧江-眉公河地震带以及巴颜喀拉山地震带;在中国东商地区相关性相对较高的地区是:郯城-营口地震带、长江下游-南黄海地震带以臁东南沿海 相似文献
14.
结合新疆构造活动的特点及地震活动的分区,探讨了境内强震活动的迁移特征,结果表明新疆强震活动始于乌恰地区,分别沿南天山西段由南向北迁移和沿西昆仑带由西向东迁移。其迁移方式主要表现为天山带强震活动由低纬向高纬地区成组迁移,各带内次级活动区的往返迁移。研究结果将为判断新疆各区(带)地震活动的趋势及强震危险地区提供依据。 相似文献
15.
16.
给出了2003—2008年新疆74次MS≥4.5地震的震源机制解。分析了该期间震源机制反映出的新疆区域应力场特征,并结合1990—2008年的地震活动图像和区域应力场进行了讨论。结果认为:1990—2003年与2004—2008年新疆MS≥5地震活动空间分布图像存在较大的差异性;震源机制得到的主压应力P轴方位为NNW向,与新疆近SN向的背景应力场和作者前期给出的NNE向结果略有差异,反映出不同时期新疆大区域应力场的变化特点;中强地震震源机制主压应力P轴仰角的大小变化与新疆地震活动的强弱相关性明显。 相似文献
17.
根据中国大陆不同来源的多个GPS区域监测网1991~1999年间的观测资料和“中国地壳运动观测网络”基本网1998~2000年的观测资料,联合处理得到中国大陆地壳水平运动速度场结果,通过最小二乘配置法建立中国大陆水平运动速度场模型,获得了基于连续介质假设的中国大陆水平应变场(或称为视应变场)初步结果. 分析了水平运动、应变场空间分布特征及其与强震的关系,并简要分析了2001年11月14日昆仑山口西8.1级大地震的区域构造变形背景. 结果表明:中国大陆中西部构造变形强烈,应变速率值高,又以青藏块体及其边缘和新疆西部最为显著. 除川滇、新疆西部外,大部分地区的近东西向断裂存在左旋剪切变形,近南北向的断裂存在右旋剪切变形. 而东部地区构造变形相对较弱. 强震通常发生在剪切应变率的高值区及其边缘,尤其是与构造变形背景相一致的剪应变率高值区. 昆仑山口西8.1级地震发生在最显著的东西向左旋剪切应变率高值区,从该区域的应变状态分析,具备近东西向断裂产生巨型走滑破裂错动的构造变形背景. 相似文献
18.
大地形变测量所反映的天山最新构造运动 总被引:12,自引:2,他引:12
新疆的新构造运动强烈,各大山系主体显示了断块抬升运动,而两大盆地则表现为相对下沉。分布在山系与盆地交接部位的大型活动断裂和强烈的地震活动有密切的联系。为了解新疆地壳形变的面貌,我们利用50年代至今30多年的精密水准测量资料,绘制了新疆垂直形变速率等值线图。图中清晰地反映了最新构造运动的形态,以及与地质构造的关系。南、北天山交汇的部位是北西向构造带与东西向构造带的汇合部,也是垂直形变速率等值线密度最大的地段。高速隆起与下降相伴生,今后10年内这里是大地震的潜在危险区。 相似文献
19.
系统分析了1970~2007年间新疆境内70个5级以上地震序列的余震持续时间和余震区长轴与主震震级的统计关系,以及主震破裂方式对余震时空特征参数的影响。研究结果表明,新疆及分区地震带余震持续时间和余震区长轴分别与主震震级弱相关,主震震级较低时两者关系离散,震级较高时则呈线性增强。不同的地震带这种线性关系存在差异,对于相同的主震震级,天山地震带余震持续时间一般大于西昆仑地震带,而余震区长轴前者小于后者。新疆地区主震破裂方式对余震的持续时间影响不大,但对余震区长轴影响较大,走滑型主震余震区长轴一般大于逆断型地震。 相似文献