共查询到20条相似文献，搜索用时 234 毫秒
1.
Optimal design of tuned mass dampers for a multi‐storey cross laminated timber building against seismic loads 
下载免费PDF全文
下载免费PDF全文 In this paper, the effectiveness of different design solutions for tuned mass dampers (TMD) applied to high‐rise cross‐laminated (X‐Lam) timber buildings as a means to reduce the seismic accelerations was investigated. A seven‐storey full‐scale structure previously tested on shaking table was used as a reference. The optimal design parameters of the TMDs, i.e. damping and frequency ratios, were determined by using a genetic algorithm on a simplified model of the reference structure, composed by seven masses each representing one storey. The optimal solutions for the TMDs were then applied to a detailed finite element model of the seven‐storey building, where the timber panels were modelled with shell elements and the steel connectors with linear spring. By comparing the numerical results of the building with and without multiple TMDs, the improvement in seismic response was assessed. Dynamic time‐history analyses were carried out for a set of seven natural records, selected in accordance with Eurocode 8, on the simplified model, and for Kobe earthquake ground motion on the detailed model. Results in terms of acceleration reduction for different TMD configurations show that the behaviour of the seven‐storey timber building can be significantly improved, especially at the upper storeys. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
2.
Seismic vibration control of building structures with multiple tuned mass damper floors integrated 下载免费PDF全文
下载免费PDF全文 Floor isolation system (FIS) achieving very small floor accelerations has been used to ensure human comfortability or protect important equipments in buildings. Tuned mass damper (TMD) with large mass ratios has been demonstrated to be robust with respect to the changes in structural properties. This paper presents the concept of a TMD floor vibration control system, which takes advantages of both the FIS and TMD. Such a system is called ‘TMD floor system’ herein. The TMD floor system (TMDFS) in which building floors serve as TMDs can achieve large mass ratio without additional masses. Furthermore, multiple TMD floors installed in a building can control multimode vibrations. Then, an optimal design process, where the objective function is set as the maximum magnitude of the frequency response functions of inter‐storey drifts, is proposed to determine the TMD floor parameters. Additionally, the multimode approach is applied to determine the optimal locations of TMD floors if not all of the floors in a building can serve as TMDs. In addition to the numerical simulations, a scaled model shaking table experiment is also conducted. Both the numerical and experimental results show that the absolute accelerations of the TMD floors are smaller than those of the main structural storeys, which indicates the TMDFS maintains the merit of FIS while greatly reducing seismic responses of main structures. Copyright © 2013 John Wiley & Sons, Ltd. 相似文献
3.
A new method to design multiple tuned mass dampers (multiple TMDs) for minimizing excessive vibration of structures has been developed using a numerical optimizer. It is a very powerful method by which a large number of design variables can be effectively handled without imposing any restriction before the analysis. Its framework is highly flexible and can be easily extended to general structures with different combinations of loading conditions and target controlled quantities. The method has been used to design multiple TMDs for SDOF structures subjected to wide‐band excitation. Some novel results have been obtained. To reduce displacement response of the structure, the optimally designed multiple TMDs have distributed natural frequencies and distinct damping ratios at low damping level. The obtained optimal configuration of TMDs was different from the earlier analytical solutions and was proved to be the most effective. A robustness design of multiple TMDs has also been presented. Robustness is defined as the ability of TMDs to function properly despite the presence of uncertainties in the parameters of the system. Numerical examples of minimizing acceleration structural response have been given where the system parameters are uncertain and are modeled as independent normal variates. It was found that, in case of uncertainties in the structural properties, increasing the TMD damping ratios along with expanding the TMD frequency range make the system more robust. Meanwhile, if TMD parameters themselves are uncertain, it is necessary to design TMDs for higher damping ratios and a narrower frequency range. Copyright © 2004 John Wiley & Sons, Ltd. 相似文献
4.
A new type of velocity adjustable tuned mass damper (TMD) consisting of impulse generators and clutches is presented. The force impulse is generated by a joining operation of electromagnets and springs and MR dampers are used as clutches. Rules for velocity adjustment are established according to the working mechanism of TMD. The analysis program is developed on a VB platform. Seismic response of SDOF structures with both passive TMD and velocity adjustable TMD are analyzed. The results show that (1) the control effectiveness of passive TMDs is usually unstable; (2) the control effectiveness of the proposed semi-active TMDs is much better than passive TMDs under typical seismic ground motions; and (3) unlike the passive TMD system, the proposed velocity adjustable TMDs exhibit good control effectiveness even when the primary structure performance becomes inelastic during severe earthquakes. 相似文献
5.
The effectiveness of tuned mass dampers (TMD) in vibration control of buildings was investigated under moderate ground shaking caused by long‐distance earthquakes with frequency contents resembling the 1985 Mexico City (SCT) or the 1995 Bangkok ground motion. The elastic–perfectly plastic material behaviour was assumed for the main structure, with linear TMDs employed by virtue of their simplicity and robustness. The accumulated hysteretic energy dissipation affected by TMD was examined, and the ratio of the hysteretic energy absorption in the structure with TMD to that without it is proposed to be used, in conjunction with the peak displacement ratio, as a supplementary TMD performance index since it gives an indication of the accumulated damage induced in the inelastic structures. For the ground motions considered, TMD would be effective in reducing the hysteretic energy absorption demand in the critical storeys for buildings in the 1.8–2.8 s range. The consequence is reduction in damage of the buildings which would otherwise suffer heavy damage in the absence of TMD, resulting in economical restorability in the damage control limit state. This is of practical significance in view of the current trend toward performance‐based design. Copyright © 2001 John Wiley & Sons, Ltd. 相似文献
6.
Carlos Moutinho 《地震工程与结构动力学》2012,41(14):2059-2073
It is well established that small tuned mass dampers (TMDs) attached to structures are very effective in reducing excessive harmonic vibrations induced by external loads but are not as interesting within the context of earthquake engineering problems. For this reason, large mass ratio TMDs have been proposed with the objective of adding a significant amount of damping to structures, thus constituting a good means of reducing structural response in these cases. This solution has other important and attractive dynamic features such as robustness to system uncertainties and reduction of the motion of the inertial mass. In this context, this paper aims to describe an alternative methodology to existing procedures used to tune these devices to earthquake loads and to present some additional considerations regarding its performance in controlling seismic vibrations. The main feature of the proposed method consists of establishing a direct proportion between the damping ratios of the structure's first two vibration modes and the adopted mass ratio. By equalizing the damping ratios of the system's main vibration modes, this proposal also facilitates the use of simplified methods, such as modal analysis based on response spectra. To demonstrate the usefulness of this alternative methodology, an application example is presented, which was also used to perform a parametric study involving other tuning methods and to estimate mass ratio values from which there is no significant advantage in increasing the TMD mass. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
7.
The dynamic response of tall civil structures due to earthquakes is very important to civil engineers. Structures exposed to earthquakes experience vibrations that are detrimental to their structural components. Structural pounding is an additional problem that occurs when buildings experience earthquake excitation. This phenomena occurs when adjacent structures collide from their out‐of‐phase vibrations. Many energy dissipation devices are presently being used to reduce the system response. Tuned mass dampers (TMD) are commonly used to improve the response of structures. The stiffness and damping properties of the TMD are designed to be a function of the natural frequency of the building to which it is connected. This research involves attaching adjacent structures with a shared tuned mass damper (STMD) to reduce both the structures vibration and probability of pounding. Because the STMD is connected to both buildings, the problem of tuning the STMD stiffness and damping parameters becomes an issue. A design procedure utilizing a performance function is used to obtain the STMD parameters to result in the best overall system response. Copyright © 2001 John Wiley & Sons, Ltd. 相似文献
8.
This paper investigates the optimized parameters for tuned mass dampers (TMDs) to decrease the earthquake vibrations of tall buildings; involving soil–structure interaction (SSI) effects. The time domain analysis based on Newmark method is employed in this study. To illustrate the results, Tabas and Kobe earthquakes data are applied to the model, and ant colony optimization (ACO) method is utilized to obtain the best parameters for TMD. The TMD mass, damping coefficient and spring stiffness are assumed as design variables, and the objective is to reduce both the maximum displacement and acceleration of stories. It is shown that how the ACO can be effectively applied to design the optimum TMD device. It is also indicated that the soil type greatly affects the TMD optimized parameters and the time response of structures. This study helps the researchers to better understanding of earthquake vibrations, and leads the designers to achieve the optimized TMD for high-rise buildings. 相似文献
9.
Optimum design and application of non‐traditional tuned mass damper toward seismic response control with experimental test verification 下载免费PDF全文
下载免费PDF全文 A variant type of tuned mass damper (TMD) termed as ‘non‐traditional TMD (NTTMD)’ is recently proposed. Mainly focusing on the employment of TMD for seismic response control, especially for base‐isolated or high‐rise structures, this paper aims to derive design formulae of NTTMDs based on two methodologies with different targets. One is the fixed points theory with the performance index set as the maximum magnitude of the frequency response function of the relative displacement of the primary structure with respect to the ground acceleration, and the other is the stability maximization criterion (SMC) to make the free vibration of the primary structure decay in the minimum duration. Such optimally designed NTTMDs are compared with traditional TMDs by conducting both numerical simulations and experiments. The optimum‐designed NTTMDs are demonstrated to be more effective than the optimum‐designed traditional TMDs, with smaller stroke length required. In particular, the effectiveness of the TMDs combined with a base‐isolated structure is investigated by small‐scale model experimental tests subjected to a time scaled long period impulsive excitation, and it is demonstrated that the SMC‐based NTTMD can suppress structural free vibration responses in the minimum duration and requires much smaller accommodation space. Additionally, a small‐scale shaking table experiment on a high‐rise bending model attached with a SMC‐based NTTMD is conducted. This study indicates that NTTMD has a high potential to apply to seismic response control or retrofit of structures such as base‐isolated or central column‐integrated high‐rise structures even if only a limited space is available for accommodating TMDs. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
10.
Mehdi Setareh 《地震工程与结构动力学》2001,30(3):449-462
A continuously variable semi‐active damper is used in a tuned mass damper (TMD) to reduce the level of vibration of a single‐degree‐of‐freedom system subjected to harmonic base excitations. The ground hook dampers as have been used in the auto‐industry are being studied here. Using these dampers a new class of tuned mass dampers, named as ground hook tuned mass dampers (GHTMD) is being introduced. In order to generalize the design properties of the GHTMDs, they are defined in terms of non‐dimensional parameters. The optimum design parameters of GHTMDs for lightly damped systems are obtained based on the minimization of the steady‐state displacement response of the main mass. These parameters are computed for different mass ratios and main system damping ratios. Frequency responses of the resulting systems are compared to that of equivalent TMDs using passive dampers. In addition, other characteristics of this system as compared to the passive TMDs are discussed. A design guide to obtain the optimum parameters of GHTMD using the developed diagrams in this paper based on non‐dimensional values is presented. Copyright © 2001 John Wiley & Sons, Ltd. 相似文献
11.
A comprehensive parametric study on the inelastic seismic response of seismically isolated RC frame buildings, designed for gravity loads only, is presented. Four building prototypes, with 23 m × 10 m floor plan dimensions and number of storeys ranging from 2 to 8, are considered. All the buildings present internal resistant frames in one direction only, identified as the strong direction of the building. In the orthogonal weak direction, the buildings present outer resistant frames only, with infilled masonry panels. This structural configuration is typical of many existing RC buildings, realized in Italy and other European countries in the 60s and 70s. The parametric study is based on the results of extensive nonlinear response‐time history analyses of 2‐DOF systems, using a set of seven artificial and natural seismic ground motions. In the parametric study, buildings with strength ratio (Fy/W) ranging from 0.03 to 0.15 and post‐yield stiffness ratio ranging from 0% to 6% are examined. Three different types of isolation systems are considered, that is, high damping rubber bearings, lead rubber bearings and friction pendulum bearings. The isolation systems have been designed accepting the occurrence of plastic hinges in the superstructure during the design earthquake. The nonlinear response‐time history analyses results show that structures with seismic isolation experience fewer inelastic cycles compared with fixed‐base structures. As a consequence, although limited plastic deformations can be accepted, the collapse limit state of seismically isolated structures should be based on the lateral capacity of the superstructure without significant reliance on its inherent hysteretic damping or ductility capacity. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
12.
This paper investigates the dynamic behavior and the seismic effectiveness of a non‐conventional Tuned Mass Damper (TMD) with large mass ratio. Compared with conventional TMD, the device mass is increased up to be comparable with the mass of the structure to be protected, aiming at a better control performance. In order to avoid the introduction of an excessive additional weight, masses already present on the structure are converted into tuned masses, retaining structural or architectural functions beyond the mere control function. A reduced order model is introduced for design purposes and the optimal design of a large mass ratio TMD for seismic applications is then formulated. The design method is specifically developed to implement High‐Damping Rubber Bearings (HDRB) to connect the device mass to the main structure, taking advantage of combining stiffness and noticeable damping characteristics. Ground acceleration is modeled as a Gaussian random process with white noise power spectral density. A numerical searching technique is used to obtain the optimal design parameter, the frequency ratio alpha, which minimizes the root‐mean‐square displacement response of the main structure. The study finally comprises shaking table tests on a 1:5 scale model under a wide selection of accelerograms, both artificial and natural, to assess the seismic effectiveness of the proposed large mass ratio TMD. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
13.
Although the design and applications of linear tuned mass damper (TMD) systems are well developed, nonlinear TMD systems are still in the developing stage. Energy dissipation via friction mechanisms is an effective means for mitigating the vibration of seismic structures. A friction‐type TMD, i.e. a nonlinear TMD, has the advantages of energy dissipation via a friction mechanism without requiring additional damping devices. However, a passive‐friction TMD (PF‐TMD) has such disadvantages as a fixed and pre‐determined slip load and may lose its tuning and energy dissipation abilities when it is in the stick state. A novel semi‐active‐friction TMD (SAF‐TMD) is used to overcome these disadvantages. The proposed SAF‐TMD has the following features. (1) The frictional force of the SAF‐TMD can be regulated in accordance with system responses. (2) The frictional force can be amplified via a braking mechanism. (3) A large TMD stroke can be utilized to enhance control performance. A non‐sticking friction control law, which can keep the SAF‐TMD activated throughout an earthquake with an arbitrary intensity, was applied. The performance of the PF‐TMD and SAF‐TMD systems in protecting seismic structures was investigated numerically. The results demonstrate that the SAF‐TMD performs better than the PF‐TMD and can prevent a residual stroke that may occur in a PF‐TMD system. Copyright © 2009 John Wiley & Sons, Ltd. 相似文献
14.
Tuned mass dampers(TMDs) have been widely used in recent years to mitigate structural vibration.However,the damping mechanisms employed in the TMDs are mostly based on viscous dampers,which have several well-known disadvantages,such as oil leakage and difficult adjustment of damping ratio for an operating TMD.Alternatively,eddy current damping(ECD) that does not require any contact with the main structure is a potential solution.This paper discusses the design,analysis,manufacture and testing of a large-scale horizontal TMD based on ECD.First,the theoretical model of ECD is formulated,then one large-scale horizontal TMD using ECD is constructed,and finally performance tests of the TMD are conducted.The test results show that the proposed TMD has a very low intrinsic damping ratio,while the damping ratio due to ECD is the dominant damping source,which can be as large as 15% in a proper configuration.In addition,the damping ratios estimated with the theoretical model are roughly consistent with those identified from the test results,and the source of this error is investigated.Moreover,it is demonstrated that the damping ratio in the proposed TMD can be easily adjusted by varying the air gap between permanent magnets and conductive plates.In view of practical applications,possible improvements and feasibility considerations for the proposed TMD are then discussed.It is confirmed that the proposed TMD with ECD is reliable and feasible for use in structural vibration control. 相似文献
15.
This paper presents an effective optimization technique for the elastic and inelastic drift performance design of reinforced concrete buildings under response spectrum loading and pushover loading. Attempts have been made to develop an automatic optimal elastic and inelastic drift design of concrete framework structures. The entire optimization procedure can be divided into elastic design optimization and inelastic design optimization. Using the principle of virtual work, the elastic drift response generated by the response spectrum loading and the inelastic drift response produced by the non‐linear pushover loading can be explicitly expressed in terms of element sizing design variables. The optimization methodology for the solution of the explicit design problem of buildings is fundamentally based on the Optimality Criteria approach. One ten‐story, two‐bay building frame example is presented to illustrate the effectiveness and practicality of the proposed optimal design method. While rapid convergence in a few design cycles is found in the elastic optimization process, relatively slow but steady and smooth convergence of the optimal performance‐based design is found in the inelastic optimization process. Copyright © 2004 John Wiley & Sons, Ltd. 相似文献
16.
P. Kamatchi J. Rajasankar Nagesh R. Iyer N. Lakshmanan G.V. Ramana A.K. Nagpal 《Soil Dynamics and Earthquake Engineering》2010
Towards formulating guidelines for performance evaluation of buildings to site-specific earthquakes, studies are reported in literature on the effect of various critical parameters. No study is, however, reported on the effect of depth of soil stratum. In this paper, a methodology is proposed and applied for performance evaluation of buildings for site-specific earthquakes including depth of soil stratum as a parameter. The methodology integrates independent procedures meant for performance evaluation of buildings and site-specific seismic analysis. Application of the proposed methodology enables to determine performance point of a building in terms of inelastic displacement and base shear. Numerical application of the methodology is demonstrated using the particulars of Delhi region. Two typical RC buildings (B1 and B2) with significantly different inelastic behaviour, assumed to be located on soil depths ranging from 10 to 200 m are chosen for the application study. Capacity spectra of the buildings are generated from nonlinear static analysis. Studies indicate that for building B1, with elasto-plastic behaviour, the depth of soil stratum strongly influences demand on inelastic displacement compared to that on inelastic base shear. For building B2, with continuously varying inelastic behaviour, the depth of soil stratum is observed to have significant influence on both the inelastic base shear as well as inelastic displacement. Responses of the buildings are compared with that obtained based on design spectrum of Indian seismic code. For both the cases, inelastic displacements as well as inelastic base shears are underestimated by Indian seismic code for certain depths of soil stratum. Proposed methodology enables the calculation of realistic values of inelastic base shear and corresponding displacement of a building for site-specific earthquakes by considering the actual characteristics of soil stratum. 相似文献
17.
常摩擦TMD地震控制效果的理论和实验研究 总被引：2，自引：0，他引：2
在TMD中采用摩擦阻尼代替传统的粘滞阻尼,可有效降低TMD的造价,从而促进其推广应用。但摩擦元件是非线性的,给摩擦TMD分析和设计造成了一定的困难。为了研究常摩擦TMD地震控制的特点和规律,文中采用时程分析法进行了简谐激励和地震激励下摩擦TMD对单自由度结构响应控制的理论分析;在理论分析结果的指导下,进行了单自由度主结构和摩擦TMD系统在简谐激励和地震激励下的振动台试验。理论分析和试验结果表明:除了频率比和质量比的影响,摩擦TMD的控制效果和摩擦力大小、激励幅值有关,只要参数设置合适,其控制效果是令人满意的;在设计摩擦TMD时要针对激励大小、目标控制效率进行具体分析。 相似文献
18.
The classical response spectrum method continues to be the most popular approach for designing base‐isolated buildings, therefore avoiding computationally expensive nonlinear time‐history analyses. In this framework, a new method for the seismic analysis and design of building structures with base isolation system (BIS) is formulated and numerically validated, which enables one to overcome the main shortcomings of existing techniques based on the response spectrum method. The main advantages are the following: first, reduced computational effort with respect to an exact complex‐valued modal analysis, which is obtained through a transformation of coordinates in two stages, both involving real‐valued eigenproblems; second, effective representation of the damping, which is pursued by consistently defining different viscous damping ratios for the modes of vibration of the coupled BIS‐superstructure dynamic system; and third, ease of use, because a convenient reinterpretation of the combination coefficients leads to a novel damping‐adjusted combination rule, in which just a single response spectrum is required for the reference value of the viscous damping ratio. The proposed approach is specifically intended for design situations where (i) the dynamic behaviour of seismic isolators can be linearised and (ii) effects of nonproportional damping, as measured by modal coupling indexes, are negligible in the BIS‐superstructure assembly. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
19.
基础隔震技术广泛应用于建筑结构以减轻结构的地震响应.值得注意的是,在隔震体系中减小主结构的加速度响应是以牺牲隔震器变形为代价的.调谐惯容系统(TID)和隔震器组成的混合隔震体系可减小隔震层的位移响应.与传统调谐质量阻尼器(TMD)结构类似,TID 由惯容、调谐弹簧和阻尼元件组成.因此,可直接利用 TMD减震系统的设计公式来确定 TID 的最优参数.首先基于单自由度体系(SDOF)附加 TID的运动方程,推导分析两种 TID和 TMD设计公式,对两者设计公式的前提条件和适用性进行深入的探讨.其后,借助基础隔震体系的benchmark模型来检验设计 TID的可行性和有效性.数值模拟结果表明,在不增加主结构绝对加速度响应的情况下, TID能够显著减小基础隔震结构的位移响应和基底剪力. 相似文献
20.
Optimal design theory for linear tuned mass dampers(TMD) has been thoroughly investigated,but is still under development for nonlinear TMDs.In this paper,optimization procedures in the time domain are proposed for design of a TMD with nonlinear viscous damping.A dynamic analysis of a structure implemented with a nonlinear TMD is conducted fi rst.Optimum design parameters for the nonlinear TMD are searched using an optimization method to minimize the performance index.The feasibility of the proposed optimiza... 相似文献