首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
Numerous morphological changes can occur where two channels of distinct sediment and flow regimes meet, including abrupt shifts in channel slope, cross‐sectional area, planform style, and bed sediment size along the receiving channel. Along the Rio Chama between El Vado and Abiquiu Dams, northern New Mexico, arroyo tributaries intermittently deliver sediment from erodible sandstone and shale canyon walls to the mainstem channel. Much of the tributary activity occurs in flash floods and debris flows during summer thunderstorms, which often load the channel with sand and deposit coarser material at the mainstem confluence. In contrast, mainstem channel flow is dominated by snowmelt runoff. To examine tributary controls, we systematically collected cross‐section elevation and bed sediment data upstream and downstream of 26 tributary confluences along a 17 km reach. Data from 203 cross‐sections were used to build a one‐dimensional hydraulic model for comparing estimated channel parameters at bankfull and low‐flow conditions at these sites As compared to intermediate reaches, confluences primarily impact gradient and bed sediment size, reducing both parameters upstream of confluences and increasing them downstream. Cross‐section area is also slightly elevated above tributary confluences and reduced below. Major shifts in slope and bed sediment size at confluences appear to drive variations in sediment entrainment and transport capacity and the relative storage of sand along the channel bed. The data were analyzed and compared to models of channel organization based on lateral inputs, such as the Network Variance Model and the Sediment Link Concept. At a larger scale, hillslope ? channel coupling increases in the downstream third of the study reach, where the canyon narrows, resulting in steeper slopes and more continuous coarse bed material along the mainstem, and thus, limiting the contrast with tributary confluences. However, channel form and sediment characteristics are highly variable along the study reach, reflecting variations in the size and volume of sediment inputs related to the surface geology in tributary watersheds, morphology of the Rio Chama at the junction (i.e. bends, confinement), and the relative magnitude and location of past depositional events. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

2.
Recent field and modeling investigations have examined the fluvial dynamics of confluent meander bends where a straight tributary channel enters a meandering river at the apex of a bend with a 90° junction angle. Past work on confluences with asymmetrical and symmetrical planforms has shown that the angle of tributary entry has a strong influence on mutual deflection of confluent flows and the spatial extent of confluence hydrodynamic and morphodynamic features. This paper examines three‐dimensional flow structure and bed morphology for incoming flows with high and low momentum‐flux ratios at two large, natural confluent meander bends that have different tributary entry angles. At the high‐angle (90°) confluent meander bend, mutual deflection of converging flows abruptly turns fluid from the lateral tributary into the downstream channel and flow in the main river is deflected away from the outer bank of the bend by a bar that extends downstream of the junction corner along the inner bank of the tributary. Two counter‐rotating helical cells inherited from upstream flow curvature flank the mixing interface, which overlies a central pool. A large influx of sediment to the confluence from a meander cutoff immediately upstream has produced substantial morphologic change during large, tributary‐dominant discharge events, resulting in displacement of the pool inward and substantial erosion of the point bar in the main channel. In contrast, flow deflection is less pronounced at the low‐angle (36°) confluent meander bend, where the converging flows are nearly parallel to one another upon entering the confluence. A large helical cell imparted from upstream flow curvature in the main river occupies most of the downstream channel for prevailing low momentum‐flux ratio conditions and a weak counter‐rotating cell forms during infrequent tributary‐dominant flow events. Bed morphology remains relatively stable and does not exhibit extensive scour that often occurs at confluences with concordant beds. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

3.
Confluences are important locations for river mixing within drainage networks, yet few studies have examined in detail the dynamics of mixing within confluences. This study examines the influence of momentum flux ratio, the scale of the flow (cross‐sectional area) and the density differences between incoming flows on thermal mixing at a small stream confluence. Results reveal that rates and patterns of thermal mixing depend on event‐specific combinations of the three factors. The mixing interface at this confluence is generally distorted towards the mouth of the lateral tributary by strong helical motion associated with curvature of flow from the lateral tributary as it aligns with the downstream channel. As the momentum flux from the lateral tributary increases, mixing is enhanced because helical motion from the curving tributary flow expands over the width of the downstream channel. The cross‐sectional area of the flow is negatively correlated with mixing rates, suggesting that the amount of mixing over a fixed distance downstream of the confluence is inversely related to the scale of the flow. Density differences are not strongly related to rates of mixing. Results confirm that mixing rates within the region of confluent flow interaction can be highly variable among flow events with different incoming flow conditions, but that, in general, length scales of mixing are short, and rates of mixing are high at this small confluence compared with those typically documented at large‐river confluences. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

4.
ABSTRACT

Accurate assessment of stage–discharge relationships in open channel flows is important to the design and management of hydraulic structures and engineering. Flow junctions commonly occur at the confluence of natural rivers or streams. The effect of flow junctions on the stage–discharge relationship at mountain river confluences was found by measuring velocity fields and water levels in experimental models. The results show that the backwater and accumulation–separation at flow junctions affect the flow structures and patterns in the channel; also, flow confluences may induce complex flow characteristics of backwater and flow separation at river junctions, indicating potential submerged flooding disasters within the confluence zone. The impacts of flow junctions on the stage–discharge relationship are investigated for two physical confluence models built from river confluence prototype systems in southwest China. The results show that the presence of tributary river inflows tends to increase the water level of the main river. This is important for flood control, flood-risk evaluation and engineering (e.g. hydropower station construction) in mountain rivers. Finally, a comparative quantitative analysis based on flow motion equations is conducted to evaluate the stage–discharge relationship in both uniform and regular confluence systems. The results indicate that more accurate prediction can be made when taking into account the flow non-uniformity induced by flow separation, backwater and distorted bed in the junction region.  相似文献   

5.
Confluences with low discharge and momentum ratios, where narrow steep tributaries with high sediment load join a wide low‐gradient main channel that provides the main discharge, are often observed in high mountain regions such as in the upper‐Rhone river catchment in Switzerland. Few existing studies have examined the hydro‐morphodynamics of this type of river confluence while considering sediment discharge in both confluent channels. This paper presents the evolution of the bed morphology and hydrodynamics as observed in an experimental facility with a movable bed. For that purpose, one experiment was carried out in a laboratory confluence with low discharge and momentum ratios, where constant sediment rates were supplied to both flumes. During the experiment, bed topography and water surface elevations were systematically recorded. When the bed topography reached a steady state (so‐called equilibrium) and the outgoing sediment rate approximated the incoming rate, flow velocity was measured at 12 different points distributed throughout the confluence, and the grain size distribution of the bed surface was analyzed. Typical morphodynamic features of discordant confluences such as a bank‐attached bar and a flow deflection zone are identified in this study. Nevertheless, the presence of a marked scour hole in the discordant confluence and distinct flow regimes for the tributary and main channel, differ from results obtained in previous studies. Strong acceleration of the flow along the outer bank of the main channel is responsible for the scour hole. This erosion is facilitated by the sediment discharge into the confluence from the main channel which inhibits bed armoring in this region. The supercritical flow regime observed in the tributary is the hydrodynamic response to the imposed sediment rate in the tributary. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

6.
In this paper,the evolutions of flow pattern and sediment transportation at a 90° open-channel confluence with different discharge ratios (q*) of the tributary flow to the total flow were studied.The e...  相似文献   

7.
  相似文献   

8.
Although river confluences have received geomorphic attention in recent years it is difficult to upscale these studies, so confluence‐dominated reaches are commonly presumed to be either: (1) braided; or (2) meandering and characterized by laterally migrating channels. If the geomorphology of a confluence zone is to be considered over longer timescales, changes in river style need to be taken into account. This paper uses a combination of remote sensing techniques (LiDAR, GPR, ER), borehole survey and chronometric dating to test this differentiation in the confluence‐zone of a medium‐sized, mixed‐load, temperate river system (Trent, UK), which on the basis of planform evidence appears to conform to the meandering model. However, the analysis of ‘confluence sediment body stratigraphy’ demonstrates that the confluence does not correspond with a simple meander migration model and chronostratigraphic data suggests it has undergone two major transformations. Firstly, from a high‐energy braid‐plain confluence in the Lateglacial (25–13 K yrs cal BP), to a lower‐energy braided confluence in the early to middle Holocene (early Holocene‐2.4 kyr BP), which created a compound terrace. Second, incision into this terrace, creating a single‐channel confluence (2.4–0.5 kyr cal BP) with a high sinuosity south bank tributary (the River Soar). The confluence sediment‐body stratigraphy is characterized by a basal suite of Late Pleistocene gravels bisected by younger channel fills, which grade into the intervening levee and overbank sediments. The best explanation for the confluence sediment body stratigraphy encountered is that frequent switching (soft‐avulsions sensu Edmonds et al., 2011) of the tributary are responsible for the downstream movement of the channel confluence (at an average rate of approximately 0.5 m per year) dissecting and reworking older braid‐plain sediments. The late Holocene evolution of the confluence can be seen as a variant of the incisional‐frequent channel reorganization (avulsion) model with sequential downstream migration of the reattachment point. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

9.
Knowledge of locomotion of fish near river confluences is important for prediction of fish distribution in a river network.The flow separation zone near the confluence of a river network is a favorite habitat and feeding place for silver carp,which is one of the four major species of Chinese carp and usually provides positive rheotaxis to water flow.In the current study,a series of laboratory experiments were done to determine the behavioral responses of juvenile silver carp to the hydrodynamic ...  相似文献   

10.
River confluences (RCs) are important features within river systems where the three dimensional (3D) flow structures and the downstream mixing of flows can cause deep scour holes. Despite this, few methods have been proposed to control scouring at RCs. In this study, application of a collar was experimentally examined for local scour control at the point where two rivers flow together. In parti-cular, experimental tests were done with and without collar application at three different locations. The results reveal that the scour depth is directly proportional to the discharge ratio, i.e. the ratio of lateral discharge to that in the channel downstream of the confluence, and the densimetric Froude number (Frg). In addition, installation of a collar at RCs can decrease the scour depth up to 100%, thus completely avoiding the scour process. The results also show that by increasing the Frg the optimal installation location for a collar changes and moves towards the river bed level. Using a collar can also reduce the height of the point bar formed downstream of the confluence. The outcomes of the study allow deri-vation of an equation for predicting scour depth when a collar is applied as a countermeasure. The analysis of this equation shows that the estimates are mostly affected by the Frg.  相似文献   

11.
A Bayesian Geostatistical Approach to evaluate unknown upstream flow hydrographs in multiple reach systems is implemented. The methodology was, firstly, tested through three synthetic examples of river confluences, that differ in the available data, boundary conditions and number of the estimated inflow time series. Input discharge hydrographs were routed downstream by means of the widely known HEC-RAS river analysis system to obtain the downstream stage hydrographs used as known observations for the reverse procedure. In almost all cases, the observed water levels were corrupted with random errors to highlight the reliability of the methodology in preventing instabilities and overfitting. Then the procedure was applied to the real case study of the Parma–Baganza river confluence located at the city of Parma (Italy) to assess the tributary Baganza River inflow hydrograph (supposed completely ungauged) using water level data collected downstream on the main reach. The results show that the methodology properly reproduces the unknown inflows even in presence of errors affecting the downstream water levels. The practical applicability of the proposed approach is also demonstrated in complex river systems.  相似文献   

12.
Understanding flow structures in river confluences has largely been the product of interpretations made from measured flow velocity data. Here, we turn the attention to the investigation of the patterns of both the average and standard deviations of the micro‐topography of the water surface at an asymmetrical natural discordant confluence for different flow conditions. Water surface topography is measured using a total station to survey the position of a reflector mounted on a custom‐built raft. To limit error problems related to changes in the water level, measurements are taken and analysed by cross‐stream transects where five water surface profiles are taken before moving to the next transect. Three‐dimensional numerical simulations of the flow dynamics at the field site are used to examine predicted water surface topography for a steady‐state situation. The patterns are interpreted with respect to flow structure dynamics, visual observations of boils, and bed topography. Results indicate that coherent patterns emerge at the water surface of a discordant bed confluence for different flow conditions. The zone of stagnation and the mixing layer are characterized by super‐elevation, a lateral tilt is present at the edge of the mixing layer, and a zone of super‐elevation is present on the tributary side at the downstream junction corner. The latter seems associated with periodical upwelling and is not present in the numerical simulations that do not take into account instantaneous velocity fluctuations. Planform curvature, topographic steering related to the tributary mouth bar, and turbulent structures associated with the mixing layer all play a key role in the pattern of both the average and standard deviation of the water surface topography at confluences. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

13.
Measurements of the primary and secondary velocity components were máde in two, active, braided river anabranch confluences with a simple Y-shaped plan form, in the gravelly Sunwapta River (D50 of approximately 30 mm). Flow velocity was measured at regularly-spaced intervals using a bidirectional electromagnetic current meter and the measured downstream and cross-stream velocities were converted to primary and secondary velocities to yield the secondary circulation. The primary (downstream) velocity field shows two high velocity streams from the two tributaries which merge (and, in some cases, accelerate) into a single high velocity core over the thalweg. Primary flow velocity declines as the flow expands and diverges at the downstream end of the confluence. The secondary circulation is dominated by two helical cells, back-to-back, plunging over the thalweg and diverging at the bed. This is the first confirmation of this flow structure in confluences, based on field measurements. The strength of the secondary cells declines downstream through each confluence, and laterally away from the thalweg area in cross-section. There is also a tendency for one cell, from the larger of the tributaries, to override the other. The secondary and primary flow structure and strength differs slightly between the two confluences and this is reflected in differences in scour hole form.  相似文献   

14.
A survey of flows was conducted at a river confluence with coarse bed material. Bridges were installed on both tributaries, at the confluence and farther downstream on the receiving stream. At these stations, flow velocities were measured over a dense grid for seven conditions ranging from very low flows to the bankfull stage. Hydraulic geometry relationships established at all four stations revealed that flow is accelerated through the confluence as stage rises. At bankfull discharge, average velocity is 1.6 times higher at the confluence than on either tributary. Flow acceleration occurs at and above intermediate flow stages and is concentrated at the centre of a linear pool located at the confluence. The development of a zone of high shear stress is also associated with the cell of high flow velocity. Flow acceleration is dissipated at the exit of the pool where water surges over boulder ribs. The acceleration is not related to the development of flow separation zones as observed by Best and Reid (1984) for wide junction angles, nor is it explained by the reduction of the friction exerted by the banks. Acceleration is associated with the plan geometry of the confluence, with the lateral slopes which permit water to converge, and with a reduction in grain roughness at the confluence. Owing to the curvature of the tributary and to the acute angle of entry, relative power losses through the confluence decrease with increasing stages.  相似文献   

15.
River confluences are characterized by a complex mixing zone with three-dimensional (3D) turbulent structures which have been described as both streamwise-oriented structures and Kelvin–Helmholtz (KH) vertical-oriented structures. The latter are visible where there is a turbidity difference between the two tributaries, whereas the former are usually derived from mean velocity measurements or numerical simulations. Few field studies recorded turbulent velocity fluctuations at high frequency to investigate these structures, particularly at medium-sized confluences where logistical constraints make it difficult to use devices such as acoustic doppler velocimeter (ADV). This study uses the ice cover present at the confluence of the Mitis and Neigette Rivers in Quebec (Canada) to obtain long-duration, fixed measurements along the mixing zone. The confluence is also characterized by a marked turbidity difference which allows to investigate the mixing zone dynamics from drone imagery during ice-free conditions. The aim of the study is to characterize and compare the flow structure in the mixing zone at a medium-sized (~40 m) river confluence with and without an ice cover. Detailed 3D turbulent velocity measurements were taken under the ice along the mixing plane with an ADV through eight holes at around 20 positions on the vertical. For ice-free conditions, drone imagery results indicate that large (KH) coherent structures are present, occupying up to 50% of the width of the parent channel. During winter, the ice cover affects velocity profiles by moving the highest velocities towards the centre of the profiles. Large turbulent structures are visible in both the streamwise and lateral velocity components. The strong correlation between these velocity components indicates that KH vortices are the dominating coherent structures in the mixing zone. A spatio-temporal conceptual model is presented to illustrate the main differences on the 3D flow structure at the river confluence with and without the ice cover. © 2019 John Wiley & Sons, Ltd.  相似文献   

16.
Confluence–diffluence units are key elements within many river networks, having a major impact upon the routing of flow and sediment, and hence upon channel change. Although much progress has been made in understanding river confluences, and increasing attention is being paid to bifurcations and the important role of bifurcation asymmetry, most studies have been conducted in laboratory flumes or within small rivers with width:depth (aspect) ratios less than 50. This paper presents results of a field‐based study that details the bed morphology and 3D flow structure within a very large confluence–diffluence in the Río Paraná, Argentina, with a width:depth ratio of approximately 200. Flow within the confluence–diffluence is dominated largely by the bed roughness, in the form of sand dunes; coherent, channel‐scale, secondary flow cells, that have been identified as important aspects of the flow field within smaller channels, and assumed to be present within large rivers, are generally absent in this reach. This finding has profound implications for flow mixing rates, sediment transport rates and pathways, and thus the interpretation of confluence–diffluence morphology and sedimentology. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

17.
Wetlands are permanently or seasonally flooded areas which support countless species of plants and animals. The Pantanal, in central-west Brazil is one of the largest freshwater wetlands in the world covering an area of ~150 000 km2. The relationships between geomorphology, hydrology, sedimentation, and vegetation cover are critical for understanding how the landscape constrains the dynamics of wetlands. We provide a detailed study of the geomorphology and surface hydrology of the Negro River Interfan System (NRIS), in the southern Pantanal, by applying multiple approaches (i.e. remote sensing analysis, geomorphological zonation and hydrosedimentological surveys). A multitemporal analysis of Landsat imagery produced an inundation frequency map (2000–2011 period) that revealed a permanently flooded area in the central portion of the NRIS. A hidden fluvial lake was previously undetected due to the accumulation of floating mats and floating meadows of macrophytes. The Negro and Aquidauana feeder rivers exhibit remarkable differences in channel planform, water discharge, and sediment load. The Negro River presents a distributary pattern with marginal levees with decreasing elevation as it progrades into the lake and remains as a subaqueous landform conditioning the water flow downstream. The lake outflow to the Paraguay River occurs mainly by sheet flow during flood seasons and through small tributary channels during dry months. The lake's geometry is outlined by east–northeast and west–northwest straight borders, suggesting that the area is tectonically controlled. A cloud-based worldwide water surface database (1984–2015) revealed frequent channel changes within the NRIS. Recent channel avulsions in the lower course of the Negro River are noteworthy mainly because the former river channel at the confluence with the Paraguay River is no longer connected with the Negro River channel. © 2019 John Wiley & Sons, Ltd.  相似文献   

18.
This paper is a discussion of Rhoads and Kenworthy (1998) ‘Time-averaged flow structure in the central region of a stream confluence’ Earth Surface Processes and Landforms, 23 , 171–191, that focuses upon the methods used to identify secondary circulation in river channel confluences. It argues that the Rozovskii method that Rhoads and Kenworthy use to rotate their field data to allow identification of secondary circulation cells is flawed, and can result in misleading conclusions about the nature of flow processes in confluences. It recommends that there is a re-emphasis upon helical as opposed to secondary circulation, and that recent developments in both field monitoring and numerical modelling may help significantly in this respect. Copyright © 1999 John Wiley & Sons, Ltd.  相似文献   

19.
In alluvial river systems, lateral inputs of water and/or sediment at junctions or undercut hillsides can disrupt what would otherwise be smooth downstream trends in mainstream bed elevation, channel gradient, and bed grain size. Generic styles of mainstream response to lateral inputs are investigated using a one‐dimensional sediment routing model with multiple grain size fractions. Numerical experiments isolate the effects of three para‐meters: ratio of tributary to mainstream water flux (QR), ratio of tributary to mainstream bedload flux (FR), and ratio of tributary to mainstream bedload diameter (DR). The findings are not unduly sensitive to the choice of initial conditions or to approximations made in the model. The primary distinction is between junctions that aggrade, causing local profile convexity with interrupted downstream fining, and junctions that degrade. The immediate effects of aggradation extend further upstream than downstream, whereas degradation is much more subdued and has no upstream impact. Aggradation is typical of coarse inputs (DR > 2), and degradation of fine inputs (DR < 1), but very high ratios of QR to FR also promote degradation. Both aggrading and degrading junctions can lead to a change in mainstream bed grain size well below the junction, with higher ratios of QR to FR producing a coarser distal bed. The effect of a tributary reflects the interplay between additional bed load and additional discharge to transport it. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

20.
Channel meander dynamics in fluvial systems and many tidal systems result from erosion of concave banks coupled with sediment deposition on convex bars. However, geographic information system (GIS) analysis of historical aerial photographs of the Skagit Delta marshes provides examples of an alternative meander forming process in a rapidly prograding river delta: deposition‐dominated tidal channel meander formation through a developmental sequence beginning with sandbar formation at the confluence of a blind tidal channel and delta distributary, proceeding to sandbar colonization and stabilization by marsh vegetation to form a marsh island opposite the blind tidal channel outlet, followed by narrowing of the gap between the island and mainland marsh, closure of one half of the gap to join the marsh island to the mainland, and formation of an approximately right‐angle blind tidal channel meander bend in the remaining half of the gap. Topographic signatures analogous to fluvial meander scroll bars accompany these planform changes. Parallel sequences of marsh ridges and swales indicate locations of historical distributary shoreline levees adjacent to filled former island/mainland gaps. Additionally, the location of marsh islands within delta distributaries is not random; islands are disproportionately associated with blind tidal channel/distributary confluences. Furthermore, blind tidal channel outlet width is positively correlated with the size of the marsh island that forms at the outlet, and the time until island fusion with mainland marsh. These observations suggest confluence hydrodynamics favor sandbar/marsh island development. The transition from confluence sandbar to tidal channel meander can take as little as 10 years, but more typically occurs over several decades. This depositional blind tidal channel meander formation process is part of a larger scale systemic depositional process of delta progradation that includes distributary elongation, gradient reduction, flow‐switching, shoaling, and narrowing. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号