首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
Parabolic dunes are widely distributed on coasts and margins of deserts and steppes where ecosystems are vulnerable and sensitive to environmental changes and human disturbances. Some studies have indicated that vegetated parabolic dunes can be activated into highly mobile barchan dunes and the catastrophic shift of eco‐geomorphic systems is detrimental to land management and social‐economic development; however, no detailed study has clarified the physical processes and eco‐geomorphic interactions that control the stability of a parabolic dune and its resistance to unfavorable environmental changes. This study utilizes the Extended‐DECAL (Discrete Eco‐geomorphic Aeolian Landscapes) model, parameterized by field measurements of dune topography and vegetation characteristics combined with remote sensing, to explore how increases in drought stress, wind strength, and grazing stress may lead to the activation of stabilizing parabolic dunes into highly mobile barchans. The modeling results suggest that the mobility of an initial parabolic dune at the onset of a perturbation determines the capacity of a system to absorb environmental change, and a slight increase in vegetation cover of an initial parabolic dune can increase the activation threshold significantly. The characteristics of four eco‐geomorphic interaction zones control the processes and resulting morphologies of the transformations. A higher deposition tolerance of vegetation increases the activation threshold of the dune transformation under both a negative climatic impact and an increased sand transport rate, whereas the erosion tolerance of vegetation influences the patterns of resulting barchans (a single barchan versus multiple barchans). The change in the characteristics of eco‐geomorphic interaction zones may indirectly reflect the dune stability and predict an ongoing transformation, whilst the activation angle may be potentially used as a proxy of environmental stresses. In contrast to the natural environmental changes that tend to affect relatively weak and young plants, grazing stress can exert a broader impact on any plant indistinctively. A small increase in grazing stress just above the activation threshold can accelerate dune activation significantly. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

2.
Basically, sand dunes are patterns resulting from the coupling of hydrodynamic and sediment transport. Once grains move, they modify the surface topography which in turns modifies the flow. This important feedback mechanism lies at the core of continuous dune modelling. Here we present an updated review of such a model for aeolian dunes, including important modifications to improve its predicting power. For instance, we add a more realistic wind model and provide a self‐consistent set of parameters independently validated. As an example, we are able to simulate realistic barchan dunes, which are the basic solution of the model in the condition of unidirectional flow and scarce sediments. From the simulation, we extract new relations describing the morphology and dynamics of barchans that compare very well with existing field data. Next, we revisit the problem of the stability of barchan dunes and argue that they are intrinsically unstable bed‐forms. Finally, we perform more complex simulations: first, a barchan dune under variable wind strength and, second, barchan dune fields under different boundary conditions. The latter has important implications for the problem of the genesis of barchan dunes. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

3.
A computer simulation model for transverse‐dune‐field dynamics, corresponding to a uni‐directional wind regime, is developed. In a previous formulation, two distinct problems were found regarding the cross‐sectional dune shape, namely the erosion in the lee of dunes and the steepness of the windward slopes. The first problem is solved by introducing no erosion in shadow zones. The second issue is overcome by introducing a wind speedup (shear velocity increase) factor, which can be accounted for by adding a term to the original transport length, which is proportional to the surface height. By incorporating these features we are able to model dunes whose individual shape and collective patterns are similar to those observed in nature. Moreover we show how the introduction of a non‐linear shear‐velocity‐increase term leads to the reduction of dune height, and this may result in an equilibrium dune field configuration. This is thought to be because the non‐linear increase of the transport length makes the sand trapping efficiency lower than unity, even for higher dunes, so that the incoming and the outgoing sand flux are in balance. To fully describe the inter‐dune morphology more precise dynamics in the lee of the dune must be incorporated. Copyright © 2000 John Wiley & Sons, Ltd.  相似文献   

4.
Forecasts of water level during river floods require accurate predictions of the evolution of river dune dimensions, because the hydraulic roughness of the main channel is largely determined by the bed morphology. River dune dimensions are controlled by processes like merging and splitting of dunes. Particularly the process of dune splitting is still poorly understood and – as a result – not yet included in operational dune evolution models. In the current paper, the process of dune splitting is investigated by carrying out laboratory experiments and by means of a sensitivity analysis using a numerical dune evolution model. In the numerical model, we introduced superimposed TRIAS ripples (i.e. triangular asymmetric stoss side‐ripples) on the stoss sides of underlying dunes as soon as these stoss sides exceed a certain critical length. Simulations with the model including dune splitting showed that predictions of equilibrium dune characteristics were significantly improved compared to the model without dune splitting. As dune splitting is implemented in a parameterized way, the computational cost remains low which means that dune evolution can be calculated on the timescale of a flood wave. Subsequently, we used this model to study the mechanism of dune splitting. Literature showed that the initiation of a strong flow separation zone behind a superimposed bedform is one of the main mechanisms behind dune splitting. The flume experiments indicated that besides its height also the lee side slope of the superimposed bedform is an important factor to determine the strength of the flow separation zone and therefore is an important aspect in dune splitting. The sensitivity analysis of the dune evolution model showed that a minimum stoss side length was required to develop a strong flow separation zone. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

5.
Simple, and locally compound, transverse and barchanoid dunes dominate the 2000 km2 Skeleton Coast dunefield in northwestern Namibia/South West Africa. Dune height and spacing are closely correlated (r = 0-89) and decrease across the dunefield from southwest to northeast, with an accompanying change from transverse to barchanoid ridges and ultimately barchans. The dunes are aligned transverse to the dominant strong south and south southwest onshore winds. Alignment patterns indicate that surface roughness changes between coastal plain and dunes cause dune-forming winds to swing to the right over the dunes, but resume their original direction beyond. Grain size and sorting vary at three scales: the dune, the dune landscape and through the dunefield. Overall the sands, derived from three localities by deflation from beaches supplied by vigorous longshore drift, become progressively finer and better sorted across the dunefield paralleling changes in dune height and spacing. A statistically significant relationship (r = ?0?65) was established between dune spacing and the phi grain size of the coarser fraction of the dune sands, demonstrating the importance of the protective effects of coarse grains, and suggesting that the morphometry of simple transverse dunes may be controlled by the scale of turbulence associated with the threshold wind speed required to move the coarsest fraction of the dune sand.  相似文献   

6.
The introduction of vegetation to bare barchan dunes can result in a morphological transformation to vegetated parabolic dunes. Models can mimic this planform inversion, but little is known about the specific processes and mechanisms responsible. Here we outline a minimalist, quantitative, and process‐based hypothesis to explain the barchan–parabolic transformation. The process is described in terms of variations in the stabilization of wind‐parallel cross‐sectional dune slices. We hypothesize that stabilization of individual ‘dune slices’ is the predictable result of feedbacks initiated from colonization of vegetation on the slipface, which can only occur when slipface deposition rates are less than the deposition tolerance of vegetation. Under a constant vegetation growth regime the transformation of a barchan dune into a parabolic dune is a geometric response to spanwise gradients in deposition rates. Initial vegetation colonization of barchan horns causes shear between the anchored sides and the advancing centre of the dune, which rotates the planform brinkline angle from concave‐ to convex‐downwind. This reduces slipface deposition rate and allows vegetation to expand inward from the arms to the dune centre. The planform inversion of bare barchans dunes into vegetated parabolic dunes ultimately leads to complete stabilization. Our hypothesis raises several important questions for future study: (i) are parabolic dunes transitional landforms between active and vegetation‐stabilized dune states? (ii) should stabilization modelling of parabolic dune fields be treated differently than linear dunes? and (iii) are stabilized parabolic dune fields ‘armoured’ against re‐activation? Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

7.
The purpose of the present study is to investigate the formation and planar shape of barchan ripples generated by laboratory unidirectional water currents and to compare the morphology with that of barchans formed by laboratory waves and flows in natural environments. A thin veneer of sand as a sediment source was placed initially at the upstream part of a recirculating flume and the change in bed configurations by the flow was recorded by a video camera. Two types of formative process were observed: one was that barchan ripples grew from barchanoid bedforms and the other was that they developed from a small aggregate of sand particles. The barchan ripples in the present test had the same characteristics in the height–width relation and in the migration speed as previously reported from the desert environment and wave‐flume studies. An examination of the planar shape of the barchans led to the result that the barchan ripples had larger values of body‐length/width, compared with those of barchans formed by water waves in the laboratory and by airflow in natural deserts. The horn‐length/width of the barchan ripples was smaller than that of barchan dunes in deserts but larger than that of barchans in oscillatory laboratory flows. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

8.
Tidal sand dune dynamics is observed for two tidal cycles in the Arcachon tidal inlet, southwest France. An array of instruments is deployed to measure bathymetric and current variations along dune profiles. Based on the measurements, dune crest horizontal and vertical displacements are quantified and show important dynamics in phase with tidal currents. We observed superimposed ripples on the dune stoss side and front, migrating and changing polarity as tidal currents reverse. A 2D RANS numerical model is used to simulate the morphodynamic evolution of a flat non-cohesive sand bed submitted to a tidal current. The model reproduces the bed evolution until a field of sand bedforms is obtained that are comparable with observed superimposed ripples in terms of geometrical dimensions and dynamics. The model is then applied to simulate the dynamics of a field of large sand dunes of similar size as the dunes observed in situ. In both cases, simulation results compare well with measurements qualitatively and quantitatively. This research allows for a better understanding of tidal sand dune and superimposed ripple morphodynamics and opens new perspectives for the use of numerical models to predict their evolution.  相似文献   

9.
Large asymmetric bedforms known as dunes commonly dominate the bed of sand rivers. Due to the turbulence generation over their stoss and lee sides, dunes are of central importance in predicting hydraulic roughness and water levels. During floods in steep alluvial rivers, dunes are observed to grow rapidly as flow strength increases, undergoing an unstable transition regime, after which they are washed out in what is called upper stage plane bed. This transition of dunes to upper stage plane bed is associated with high transport of bed sediment in suspension and large decrease in bedform roughness. In the present study, we aim to improve the prediction of dune development and dune transition to upper stage plane bed by introducing the transport of suspended sediment in an existing dune evolution model. In addition, flume experiments are carried out to investigate dune development under bed load and suspended load dominated transport regimes, and to get insight in the time scales related to the transition of dunes to upper stage plane bed. Simulations with the extended model including the transport of suspended sediment show significant improvement in the prediction of equilibrium dune parameters (e.g. dune height, dune length, dune steepness, dune migration rate, dune lee side slope) both under bed load dominant and suspended load dominant transport regimes. The chosen modeling approach also allows us to model the transition of dunes to upper stage plane bed which was not possible with the original dune evolution model. The extended model predicts change in the dune shapes as was observed in the flume experiments with decreasing dune heights and dune lee slopes. Furthermore, the time scale of dune transition to upper stage plane bed was quite well predicted by the extended model. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

10.
Transverse dunes appear in regions of mainly unidirectional wind and high sand availability. A dune model is extended to two‐dimensional calculation of the shear stress. It is applied to simulate dynamics and morphology of three‐dimensional transverse dunes. In the simulations they seem to reach translational invariance and do not stop growing. Hence, simulations of two‐dimensional dune ?elds have been performed. Characteristic laws were found for the time evolution of transverse dunes. Bagnold's law of the dune velocity is modi?ed and reproduced. The interaction between transverse dunes led to the interesting conclusion that small dunes can travel over bigger ones. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

11.
This paper addresses the development of a flow region associated with turbulence and stress characteristics over a series of 2-D asymmetric dunes placed successively at the flume surface. Experiments were conducted over twelve asymmetric dunes of mean length 32 cm, crest height 3 cm and the dune width almost as wide as width of the flume, using 3-D Micro-ADV at the Indian Statistical Institute, Calcutta. The variations of turbulence statistics along the flow affected by the wavy bottom roughness have been studied. Quadrant decomposition of the instantaneous Reynolds shear stress has been adopted to calculate the contribution of ejection and sweeping events in shear stress generation. The relative dominance of two events are found to contribute in a cyclic manner (spatially) in the near bed region, whereas such phenomenon seems to be disappeared towards the main flow.  相似文献   

12.
The Nyírség is the second largest alluvial fan in Hungary covered by fixed sand dunes. The primary aim of the paper is to describe the morphology of dunes in the region and classify them based on their morphometric characteristics. The other major aim is to select those dunes which were exposed to significant anthropogenic impact, and to determine the spatial and temporal differences in the intensity of human activity. The following dune types were separated: valley‐marginal, transitional valley‐marginal, transitional parabolic, filled, partially and unfilled parabolic dunes. After defining different dune types and their parameters, certain dunes were selected based on exposure to significant anthropogenic impact. Definite connection was demonstrated between the intensity of human environmental impact and the rate of erosion on fixed sand dunes. The erosion of sand dunes was most intensive in Medieval times, most likely due to concentration of agricultural land use. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

13.
Within the greater Ar Rub' al Khali (Empty Quarter) sand sea lies an internal depocentre, the Al Liwa Basin, which comprises a variety of mega‐scale dune types. Crescentic dunes dominant the north of the basin while megadunes of stellate or star form are a major landform of the south‐eastern reaches. Their development into dune fields is determined by the style and rate of dune–dune interactions, the boundary conditions imposed by a multi‐modal wind regime, fluctuating groundwater levels, and sediment availability under an assortment of climatic conditions throughout the Quaternary. As a result, dune field patterns are a collective response to these perturbations in space, time and environment. The R‐statistic is a collective measure of these responses, and is a metric capable of identifying the degree of pattern maturity or self‐organization of the aeolian system, and the pathways from which patterns evolve. The spatial signature of the southerly located star dunes is characterized by two definitive patterns of organization: the first, one of complete spatial randomness, the second, a low degree of spatial uniformity. In isolation, these results appear to be unrelated to those for crescentic dunes of the region in which a significantly higher degree of pattern dispersion is the norm. However, when spatial statistical measures are integrated with the theoretical understanding of dune–dune interactions and the involvement of environmental agents, the complex morphodynamic pathways and linkages between regional dune fields is better understood. In this case, both constructive (e.g. merging, lateral linking) and regenerative activity (e.g. calving) have played important roles in the development of dune size, and associated adjustments in spacing, and dune numbers, and subsequently dune field patterns. Synergetic patterns are emblematic of this vast dunescape, whereby transitional geographic, morphologic, dimensional and environmental modifications exist between the mega‐crescentic and mega‐stellate dunes of the Empty Quarter. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

14.
Changes in vegetation cover within dune fields can play a major role in how dune fields evolve. To better understand the linkage between dune field evolution and interdune vegetation changes, we modified Werner's (Geology, 23, 1995: 1107–1110) dune field evolution model to account for the stabilizing effects of vegetation. Model results indicate that changes in the density of interdune vegetation strongly influence subsequent trends in the height and area of eolian dunes. We applied the model to interpreting the recent evolution of Jockey's Ridge, North Carolina, where repeat LiDAR surveys and historical aerial photographs and maps provide an unusually detailed record of recent dune field evolution. In the absence of interdune vegetation, the model predicts that dunes at Jockey's Ridge evolve towards taller, more closely‐spaced, barchanoid dunes, with smaller dunes generally migrating faster than larger dunes. Conversely, the establishment of interdune vegetation causes dunes to evolve towards shorter, more widely‐spaced, parabolic forms. These results provide a basis for understanding the increase in dune height at Jockey's Ridge during the early part of the twentieth century, when interdune vegetation was sparse, followed by the decrease in dune height and establishment of parabolic forms from 1953‐present when interdune vegetation density increased. These results provide a conceptual model that may be applicable at other sites with increasing interdune vegetation cover, and they illustrate the power of using numerical modeling to model decadal variations in eolian dune field evolution. We also describe model results designed to test the relative efficacy of alternative strategies for mitigating dune migration and deflation. Installing sand‐trapping fences and/or promoting vegetation growth on the stoss sides of dunes are found to be the most effective strategies for limiting dune advance, but these strategies must be weighed against the desire of many park visitors to maintain the natural state of the dunes. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

15.
This paper discusses a two-dimensional second-order closure model simulating air flow and turbulence across transverse dunes. Input parameters are upwind wind speed, topography of the dune ridge and surface roughness distribution over the ridge. The most important output is the distribution of the friction velocity over the surface. This model is dynamically linked to a model that calculates sand transport rates and the resulting changes in elevation. The sand transport model is discussed in a separate paper. The simulated wind speeds resemble patterns observed during field experiments. Despite the increased wind speed over the crest, the friction velocity at the crest of a bare dune is reduced compared to the upstream value, because of the effect of stream line curvature on turbulence. These curvature effects explain why desert dunes can grow in height. In order to obtain realistic predictions of friction velocity it was essential to include equations for the turbulent variables in the model. In these equations streamline curvature is an important parameter. The main flaw of the model is that it cannot deal with flow separation and the resulting recirculation vortex. As a result, the increase of the wind speed and friction velocity after a steep dune or a slipface will be too close to the dune foot. In the sand transport model this was overcome by defining a separation zone. Copyright © 1999 John Wiley & Sons, Ltd.  相似文献   

16.
The eastern portion of the Maranhão coast is characterized by large active dune‐fields located in a tropical setting. This article combines the analysis of dune‐field morphologic patterns with the classical analysis of grain size and heavy minerals to study the sedimentary dynamics of the active aeolian system in this region. Based on the heavy mineral analysis, the main sedimentary suppliers feeding the system are the westward alongshore drift bringing sand from the coast east of the Parnaíba River mouth and the river itself. The absence of well‐defined variation patterns of the two morphometric parameters studied, dune spacing and crest length, reflects complex sedimentary dynamics and transport pathways, inside the aeolian system, despite the unidirectional wind. During the wet season, the interdune plains are flooded and the system is intensely reworked by intermittent drainages. During the dry season, the deposits formed by the drainages and interdune lakes become temporary internal sedimentary sources for the system. Due to this combined aeolian‐fluvial transport, the sediment source area has a planar geometry, with contributions from the beach and interdune plains, and not linear as expected in a typical case of source only in the beach. The areal limits of the dune‐fields is the main boundary condition controlling the dune‐field patterns, as dune spacing and crest length, by changing the sedimentary inflow–outflow balance and interactions between migration dunes. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

17.
Cellular automaton modelling for the simulation of dune field formation and evolution has developed progressively in aeolian geomorphology in the last decade or so. A model that incorporates the effects of vegetation and its interactions with geomorphic landscape development – the Discrete Ecogeomorphic Aeolian Landscapes (DECAL) model – can replicate a number of important visual and qualitative aspects of the complex evolution of aeolian dune landscapes under the influence of vegetation dynamics in coastal environments. A key challenge in this research area is the analysis and comparison of both simulated and real‐world vegetated dune landscapes using objective and quantifiable principles. This study presents a methodological framework or protocol for numerically quantifying various ecogeomorphic attributes, using a suite of mathematically defined landscape metrics, to provide a rigorous and statistical evaluation of vegetated dune field evolution. Within this framework the model parameter space can be systematically explored and simulation outcomes can be methodically compared against real‐world landscapes. Based on a simplified scenario of parabolic dunes developing out of blow‐outs the resulting dune field realizations are investigated as a function of variable growth vigour of two simulated vegetation types (pioneer grass and successional woody shrub) by establishing a typological phase‐diagram of different landscape classes. The set of simulation outcomes furthermore defines a higher‐dimensional phase‐space, whose axes or dimensions can be interpreted by analysing how individual ecogeomorphic landscape metrics, or state variables, contribute to the data distribution. Principal component analysis can reduce this to a visual three‐dimensional (3D) phase‐space where landscape evolution can be plotted as time‐trajectories and where we can investigate the effects of changing environmental conditions partway through a simulation scenario. The use of landscape state variables and the construction of a 3D phase‐space presented here may provide a general template for quantifying many other eco‐geomorphic systems on the Earth's surface. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

18.
Longitudinal dune fields characterized by nearly uniform interdune spacing are distinguished from longitudinal dune fields characterized by fairly variable interdune spacing and high frequencies of dune coalescence. The empirical and theoretical evidence indicating that the former may be due to helical air currents aligned with the dunes is reviewed. Hypotheses arguing that the latter may arise indirectly from horizontal pressure gradients or bidirectional wind regimes are discussed. Evenly spaced linear sand banks aligned with tidal currents may be shown mathematically to result from energy optimalization within two-dimensional, sand-transporting flow regimes, and a similar simple or non-rotational flow model is considered for the problem of desert longitudinal dunes. An initial complex or rotational flow analysis is undertaken to discern the likely significance of roll vortices in desert sediment transport. An ‘evolutionary timescale’ is estimated for the formation of desert longitudinal dune fields. A simple analysis is performed for the effect of regional sand mass change on longitudinal dune field ordering. Recommendations are made for future empirical and theoretical research.  相似文献   

19.
For development of embryo dunes on the highly dynamic land–sea boundary, summer growth and the absence of winter erosion are essential. Other than that, however, we know little about the specific conditions that favour embryo dune development. This study explores the boundary conditions for early dune development to enable better predictions of natural dune expansion. Using a 30 year time series of aerial photographs of 33 sites along the Dutch coast, we assessed the influence of beach morphology (beach width and tidal range), meteorological conditions (storm characteristics, wind speed, growing season precipitation, and temperature), and sand nourishment on early dune development. We examined the presence and area of embryo dunes in relation to beach width and tidal range, and compared changes in embryo dune area to meteorological conditions and whether sand nourishment had been applied. We found that the presence and area of embryo dunes increased with increasing beach width. Over time, embryo dune area was negatively correlated with storm intensity and frequency. Embryo dune area was positively correlated with precipitation in the growing season and sand nourishment. Embryo dune area increased in periods of low storm frequency and in wet summers, and decreased in periods of high storm frequency or intensity. We conclude that beach morphology is highly influential in determining the potential for new dune development, and wide beaches enable development of larger embryo dune fields. Sand nourishment stimulates dune development by increasing beach width. Finally, weather conditions and non‐interrupted sequences of years without high‐intensity storms determine whether progressive dune development will take place. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

20.
Sediment budget data from an 18‐month topographic survey were analysed with data from brief experiments on wind parameters, beach moisture contents, bedforms and sand mobilization in order to monitor conditions and patterns of embryo dune development over a flat 150–1000 m wide accreting upper beach. The surface conditions over the upper beach locally affect aeolian transport, but net dune development over time depends on sustained strong winds and their orientation. Incoming marine sand supplied by storms and onshore winds is reorganized by the dominant offshore to longshore winds into elongated embryo dunes over this upper beach, imprinting a regional morphology of long‐term longshore dune ridge development. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号