首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 126 毫秒
1.
By using 126 earthquake focal mechanism solutions (M S≥4.7) during the period of 1963~1998, modern tectonic stress field in North China is inverted by means of the step by step convergence. The inversion results indicate that the tectonic stress field in the research region is clearly variational in space and time: (1) The middling principal stress axis σ 2 is basically vertical. The maximum and minimum principal stress axes σ 1 and σ 2 are nearly horizontal, but the azimuths of σ 1 and σ 3 are inconsistent in different districts and periods. (2) Before the Tangshan earthquake in 1976, the three principal stress axes are uniform. The azimuth of maximum principal stress axis σ 1 is 68° (striking in a NEE-SWW direction). (3) After the Tangshan earthquake, the maximum principal stress axis σ 1 and minimum principal stress axis σ 3 have variations in different districts. In the northern area of North China and on the eastern side of the Tancheng-Lujiang fault zone, the maximum principal stress axis σ 1 is also striking in a NEE-SWW direction. Its azimuth is 68°. It is the same as that before the Tangshan earthquake. In the southern area of North China, the maximum principal stress axis σ 1 is striking in a E-W direction and its azimuth is 87°.  相似文献   

2.
In this paper, we have carefully determined the stress zones in the Sichuan-Yunnan region with reference to the in-situ stress data of hydraulic fracturing and the inverted fault slip data by using the step-by-step convergence method for stress zoning based on focal mechanism solutions. The results indicate that the tectonic stress field in the Sichuan-Yunnan region is divided into 3 stress zones by 2 approximately parallel NNW-trending stress transition belts. The area between the 2 belts is the Sichuan-Yunnan stress zone where the maximum principal stress σ1 is just in the NNW direction. The eastern boundary of Sichuan-Yunnan stress zone (the eastern stress transition belt) is basically consistent with the eastern boundary of Sichuan-Yunnan rhombic block. The western boundary of Sichuan-Yunnan stress zone (the western stress transition belt) is not totally consistent with the western boundary of Sichuan-Yunnan rhombic block. The northern segment of the western stress transition belt extends basically along the Jinshajiang fault and accords with the western boundary of Sichuan-Yunnan rhombic block, while its southern segment does not extend along the southwestern boundary of the rhombic block, i.e., Honghe fault and converge with the eastern stress transition belt, but stretches continuously in the NNW direction and accords with the Yingpanshan fault. We therefore consider that under the combined influence from the northward motion of India Plate, the southeastward shift of east Qinghai-Xizang Plateau and the strong obstruction of South China block, the tectonic stress field in the Sichuan-Yunnan region might not be totally controlled by the previous tectonic frame and new stress transition belt may have possibly formed.  相似文献   

3.
On the basis of the GPS data obtained from repeated measurements carried out in 2004 and 2007,the horizontal principal strain of the Chinese mainland is calculated,which shows that the direction of principal compressive strain axis of each subplate is basically consistent with the P-axis of focal mechanism solution and the principal compressive stress axis acquired by geological method.It indicates that the crustal tectonic stress field is relatively stable in regions in a long time.The principal compressive stress axes of Qinghai-Tibet and Xinjiang subplates in the western part of Chinese mainland direct to NS and NNE-SSW,which are controlled by the force from the col-lision of the Eurasia Plate and India Plate.The principal compressive strain axes of Heilongjiang and North China subplates in the eastern part direct to ENE-WSW,which shows that they are subject to the force from the collision and underthrust of the Eurasia Plate to the North America and Pacific plates.At the same time,they are also af-fected by the lateral force from Qinghai-Tibet and Xinjiang subplates.The principal compressive strain axis of South China plate is WNW-ESE,which reflects that it is affected by the force from the collision of Philippine Sea Plate and Eurasia Plate and it is also subject to the lateral force from Qinghai-Tibet subplate.It is apparent from the comparison between the principal compressive strain axes in the periods of 2004~2007 and 2001~2004 that the acting directions of principal compressive stress of subplates in both periods are basically consistent.However,there is certain difference between their directional concentrations of principal compressive stress axes.The sur-face strain rates of different tectonic units in both periods indicate that the events predominating by compressive variation decrease,while the events predominating by tensile change increase.  相似文献   

4.
Using the focal mechanism solutions of 24 moderately strong earthquakes in the northern Tianshan area, we carried out system cluster and stress field inversion analysis. The result indicates that, the focal mechanism solutions of moderately strong earthquakes are mainly dipslip reverse faulting in the northern Tianshan area. The principal rupture planes of earthquakes are NW-oriented. It is basically consistent with the strike of earthquake structure in its adjacent area. The direction of the principal compression stress P axis is nearly NS, and its inclination angle is small; while the inclination angle of the principal extensional stress T axis is large. It shows that the regional stress field is mainly controlled by the near-NS horizontal compressive stress. The direction of the maximum principal stress shows a gradation process of NNE-NS-NW from east to west.  相似文献   

5.
Based on the horizontal deformation field and the strain field derived from the GPS data over the period of 1999~2001 in the Yunnan area, the characteristics of deformation and strain in the northern part of Yunnan Province have been studied. The results indicate that the central part of the studied area is rather stable with little crustal displacement, while the western and eastern parts are active with larger displacement. The strain field reveals that the orientations of the principal compressive strain axis of the crust and the sub-blocks in the area are NW-SE, while the orientations of the principal tensile strain axis is NE-SW. In the studied area, the tensile strain is predominatly in the northern part and the compressive strain is predominatly in the central and southern parts. The stretching direction of the shear-strain contour is basically consistent with the strike of the active fault. The strain and stress fields of the fault activity are related to the structure where the fault is located, while the activity properties of the faults are different.  相似文献   

6.
Jiashi and its surrounding areas are composed of many structural zones. Using the focal mechanism solutions of 59 moderately strong earthquakes in Jiashi and its surrounding areas, and combining these with the calculation results of system cluster and stress field inversion, we analyzed the evolvement characteristics of the stress field for different times and different regions. The results were as follows: The earthquakes in Jiashi are mainly strike-slip. However, those of the Kalpin block are mainly reverse events, showing an obvious thrusting. The regional characteristics are different from other areas. The direction of the regional principal stress field is near NS. However, under different tectonic backgrounds, the directions of the stress fields are different. The direction of the principal compress stress is near NS in the Kashi-Wuqia area. But before and after the 3 earthquakes with M7.0, dynamic evolution from NW to NS and then to NE with time process was observed. The Kalpin block has been dominated by a consistent stress field in the NW direction for a long time. However, the direction of the stress field of the Jiashi region is NE. Since 1996, the direction of the regional stress field has changed obviously. The direction of the P axis was deflected towards the NE, and the plunge angle increased. The result shows clearly the regional characteristics and variation of the distribution pattern of the stress field in different tectonic environments.  相似文献   

7.
From focal mechanism solutions of the earthquakes in the northern part of North China during the period of 2002~2006,the directions of principal stress axes in 4 stress sub-districts are analyzed using a grid test method.The characteristic of present crustal stress directions is discussed.Based on this result and on the focal mechanism solutions calculated for some events in the period of 1977~1998,in combination with some other study results,the temporal variation of present crustal stress directions in the northern part of North China is investigated.The re-sults confirm that the direction of crustal principal stress in some regions had somewhat rotated after the 1976 Tangshan M7.8 earthquake.The mean P axes of the focal mechanism solutions rotated clockwise not only in Tangshan sub-district,but also in Beijing and Xingtai sub-districts after the Tangshan earthquake.In Beijing and Xingtai sub-districts the orientations of principal stress axes in the period of 2002~2006 are consistent with that before the Tangshan earthquake,implying that the stress orientations has rotated back to the state before the Tang-shan earthquake in these two sub-districts.The directions of the mean P axes are nearly E-W in Tangshan sub-dis-trict since the M7.8 earthquake.The present stress field in the sub-district northwest to Beijing,or in the western part of the Zhangjiakou-Bohai fault zone,is relatively stable during the time period concerned in this study.Because of the limitation of data,this paper only states a possible variation of stress field in the northern part of North China in the recent decades.  相似文献   

8.
The regional stress field and seismic dynamics along the border zone between Fujian, Guangdong and Jiangxi Provinces are studied based on the seismo-geological data, GPS measurement, and seismicity. The results show that: (1) the principal compressional stress of the stress field is oriented in NW-SE direction and the principal extensional stress is in NE-SW direction; (2) the WNW-ward compression and collision of the Philippine Sea Plate to the eastern coast of Taiwan Island are the most direct and most important dynamic source for preparation and occurrence of strong earthquakes in the Taiwan area and along the border zone between Fujian, Guangdong and Jiangxi Provinces.  相似文献   

9.
This paper approaches the neotectonic stress field based on the data of foeal mechanismsolution,ground stress measurement,tectonic mechanical analysis and geodetic surveying,and finds out that the orientations of the maximum principal comproessive sterss patterns arequite discordant with different methods and the stress patterns are widely differnt betweenthose in the shallow and deep part of the crust in North China.Based on the analysis ofabove-mentioned data,we established a duplex model by considering the diversities of theStress patterns in 3-dimentional spaces,the boundary conditions and the lithospheric media,and made an inverse calculation by using the finite element method.The calculated results fitwell with the reality in North China,i.e.the stress patterns in lower crust which is below thedetachment interface at the deptp of 10 km from ground surface are relatively consistent withnearly horizontal state and NE-ENE trending of the maximum principal compressive stressaxes,whereas the stress patt  相似文献   

10.
We determine the stress field of Guangdong and its adjacent area by using focal mechanism solutions of 137 earthquakes and obtain tectonic stress tensors in 12 zones. The result shows that the azimuth of maximum principal stress σ1 is approximately WNW in southwestern Fujian, southern Jiangxi, Guangdong’s Heyuan and the Pearl River Delta, NW in Guangdong’s Yangjiang, and nearly NNW in the two zones of eastern Guangxi and Beibuwan Gulf (the Northern Gulf), varying clockwise in WNW-NW-NNW from east to west. The azimuth of minimum principal stress σ3 varies from NNE to ENE. The relative magnitude of medium principal stress σ2 (R value), is the smallest in Beibuwan and largest in Longyan of Fujian. Strike-slip faulting is dominated in the study area.  相似文献   

11.
川滇地块的震源机制解特征及其地球动力学解释   总被引:4,自引:0,他引:4       下载免费PDF全文
美国哈佛大学1977——2004年的矩心矩张量结果显示, 我国川西北次级地块、 滇中次级地块的西部及滇中次级地块的东部的应力场特征有明显的差别. 应用滑动矢量拟合法, 反演了这三个区域的应力场特征: 川西北次级地块以近南北向的水平主张应力轴和西倾的主压应力轴为特征; 滇中次级地块的西部以倾向北东东的主张应力轴以及近南北的水平中等主应力轴为特征; 滇中次级地块的东部以南西西——北东东向的水平主张应力轴以及北北西——南南东向的水平主压应力轴为特征. 有限元模拟结果清楚地显示出, 川滇地块在阿萨姆楔附近受到来自印度板块的强烈挤压, 随着远离阿萨姆楔, 这种挤压应力逐渐衰减; 同时, 该地区的主张应力方向明显地形成了围绕阿萨姆楔的环线. 其中, 内部物质性质均匀、 地表和底部边界自由、 侧部边界采用GPS观测约束的弹性有限元模拟显示, 在川西北次级地块, 模拟结果与震源机制解结果相一致; 在滇中次级地块, 模拟结果所显示的图象与震源机制解观测结果有差别, 不仅没有显示出与大面积的东部地区的震源机制解相一致的特征, 反而显示出与该地区西部震源机制解相一致的特征. 通过调节地块内部物质的弹性常数, 可以实现在滇中次级地块东部部分地区出现与震源机制   相似文献   

12.
日本本州及其邻近区域的应力状态以及弧后盆地的演化机制一直是人们所关注的问题.本文对2011年3月11日东日本大地震地震序列(2011年3月11日至2012年3月15日)的哈佛双力偶解进行了聚类分析,得到五种类型的震源机制解:与主震类型一致的低倾角逆断层型地震;主张应力方向垂直于日本海沟走向的正断层型地震;主张应力方向平行于日本海沟走向的正断层型地震;主压应力方向平行于日本海沟走向的逆断层型地震;包括走滑型地震在内的其他类型地震.东日本大地震地震序列中发生在弧前增生楔地震的震源机制解与大地震发生之前地震的震源机制解特征有显著区别,反映出该地区的应力状态与震前相比有较大改变.东日本大地震及其前震释放了附近区域的累积弹性应力,主震破裂区附近太平洋板块和其上覆板块接近完全解耦,降低了日本海盆地、中国东北地区的近东西向挤压应力水平.不过,整个本州岛东部区域太平洋板块和其上覆板块并没有完全解耦,但应力水平并不高.我们认为,日本海及中国东北应力水平的降低会使该区域的近东西向挤压型地震的危险性降低,而使NNE-SSW走向的走滑型地震活动性增强.同时,火山活动性也会增强.尤其是本州岛地区,存在近期火山爆发的可能性.东日本大地震地震序列的震源机制解特征还提示我们,日本海的应力状态及日本海的演化可能在一定程度上取决于太平洋板块和上覆板块的耦合状态.持续的弱耦合将不仅使得弧后大范围的地区保持岩浆上涌所必须的拉伸应力环境,而且还会因弧前隆起区发育大量正断层型地震而向深部提供促使岩浆生成所必须的水,因而造成日本海的再次扩张.  相似文献   

13.
自GCMT目录收集2015年9月16日智利MW8.3地震震中周围深度在70 km以上的震源机制解, 应用MSATSI软件反演了该地震震中周围的应力场.反演结果显示, 主压应力轴方向的整体一致性较好, 张轴的非均匀性明显, 即大致以31.5°S为界, 南部处于EW向和NS向的双轴压缩状态, 以WE向挤压为主, 兼有NS向挤压, 拉张轴近乎垂直;北部压轴方位仍为近EW向, 但张轴方位旋转至近NS向.   相似文献   

14.
田建慧  罗艳 《地震》2019,39(2):110-121
本文收集了1976—2018年发生在中国大陆及其周边地区(15°~55°N, 65°~125°E)的4303个地震震源机制解, 分析了该区震源机制解和P、 T轴空间分布特征, 并使用这些震源机制解, 反演得到了中国大陆及周边地区二维构造应力场分布。 应力场反演结果表明, 云南大部、 青藏高原大部以及华北华南大部以走滑型应力性质为主, 印度洋板块与欧亚板块的强烈碰撞控制着中国西部地区, 大量的逆断型地震集中分布在青藏高原周缘和西域活动地块的天山地区。 青藏高原内部也存在正断型地震, 且应力场方向在26°N发生了很大的变化。 位于青藏高原东构造线以南的滇缅活动块体, 最大主压应力σ1方向在大致100°E发生突变, 由以西的NNE方向偏转到NNW方向。 中国东部的东北块体到华北块体再到华南块体, 最大主压应力方向有一个从NE向逐渐转变成EW向再变化到NW向的旋转趋势。 应力场总体结果表明, 中国东部应力场主要受到太平洋板块和菲律宾板块对欧亚大陆俯冲的作用, 中国西部主要受印度板块向北碰撞欧亚大陆的影响, 块体内部相互作用、 块体与断裂带相互作用也对应力场变化产生影响。  相似文献   

15.
伽师震源区中等强度地震矩张量反演及其应力场特征   总被引:12,自引:6,他引:6       下载免费PDF全文
使用区域数字地震台站记录的宽频带长周期波形资料,在时间域反演了1997~2004年伽师震源区52次中等强度地震的矩张量.反演结果揭示,在小尺度的伽师震源区内,震源机制解的P轴、T轴和N轴呈现出明显的分区特征.本文进一步把伽师震源区分为东区和西区,分别反演了东区与西区的应力场.应力场反演结果表明,东区的应力场主压应力轴走向为321°,基本水平.最大主张应力走向68°,倾角40°.截至2004年7月,伽师震源区西部的应力场一直较为稳定,最大主压应力方向为12°,最大主张应力方向282°,二者都基本水平,中等主应力轴基本直立.自西向东,伽师震源区最大主压应力轴逆时针旋转了49°,并且西区张应力的水平作用较为显著,东区压应力的水平作用显著.应力场的这种非均匀变化特征与GPS观测得到的地壳运动速率的空间分布以及塔里木盆地边界附近的地形地貌特征有很好的一致性.震源区深部结构的陡变以及位于震源区东部边界规模较大的NW走向的普昌断裂和色力布亚隐伏断裂可能对产生这种横向非均匀的局部应力场起了重要的作用.  相似文献   

16.
Regionalcharacteristicsofstressfieldinthesouthernpartofthenorth-southseismicbeltinChinaanditsrelationwithplate movementJi-Ren...  相似文献   

17.
本文使用新疆区域数字地震台站记录的宽频带长周期数字波形资料,在时间域反演了2008年10月5日新疆乌恰6.8级地震的强余震及其周围先后发生的52次中等强度地震的矩张量解,结合Harvard大学在该区域的地震矩张量结果,研究了帕米尔东北缘的应力场分区特征.研究结果显示,位于印度板块向欧亚板块推挤的前缘及向北凸出的弧型构造的最北缘的卡兹克阿尔特弧形活动褶皱-逆断裂带,以逆冲推覆活动为主,并有部分走滑类型的地震,基本不存在正断层类型的地震;该弧型构造近东西走向的顶部(文中的西区)与其北西走向的东侧(文中的东区)的局部应力场最大主压应力方向不同,分别为NW、NNE方向,显示出在承受印度板块向欧亚板块俯冲作用的同时,东区也更多的受到了塔里木块体顺时针旋转作用的影响.位于帕米尔陆内俯冲和变形作用强烈、碰撞造成深源地震带东段的南区,地震以走滑错动为主, 逆断、正断层都有,显示出相对复杂的应力状态.位于帕米尔高原内部的西区和南区的应力场最大主压应力方向一致,由北向南,由最大主压应力轴接近水平,过渡为最大主张应力轴接近水平,一定程度揭示了板块俯冲的状态.结合南区和西区的地震深度差异及机制解中断层面的倾角,推测在中帕米尔的东部,由北向南的板块俯冲至150~170km深度,俯冲角度为60°左右.  相似文献   

18.
中国西部及邻区活动地块边界带现代构造应力场   总被引:8,自引:1,他引:7       下载免费PDF全文
利用哈佛全球矩心矩张量解数据和许忠淮认为1920mdash;1999年可靠的中国大陆震源机制解数据, 反演了中国西部及邻区活动地块边界带上现代构造应力场.通过对FMSI反演程序多次的输入和检验, 得到了边界带上的应力场.边界带上最大主压应力sigma;1轴绝大多数近水平. 在90deg;E以西的中国西部大陆及邻区, sigma;1轴水平方向基本上为近SN向;在青藏高原的东北部, sigma;1轴水平方向基本上为近NE向;在青藏高原的东南部, sigma;1轴水平方向绕喜马拉雅构造东端顺时针方向旋转.最小主压应力sigma;3轴倾角呈两极分布,西域地块区内活动地块边界带和青藏地块区内东北缘部分段sigma;3轴倾角较陡, 而青藏地块区内sigma;3轴倾角近水平, 所以西域地块区和青藏地块区内东北部相对于其它大部分青藏地块区, 有更多的逆冲地震.应力场在同一个边界带具有非均匀性. 北天山带、南天山带、西秦岭mdash;德令哈带、岷山mdash;龙门山带和安宁河mdash;小江带的非均匀性相对要小一些, 西昆仑带、海原mdash;祁连带、东昆仑带、玛尼mdash;玉树带、澜沧江带和滇西西边界带的非均匀性相对要大, 而喀喇昆仑mdash;嘉黎带和喜马拉雅带的非均匀性最显著.由于震源机制解数据的限制, 本文给出的是边界带上部分段的应力场.   相似文献   

19.
The composite stereographic projection of orientations of the compression and tension axes using thirty-nine fault-plane solutions of earthquakes from two active seismogenic sources of Nepal and adjoining areas were examined and the nature of stress pattern and their influence on tectonics in the region have been studied. The seismogenic source located in Eastern Nepal region, which has been the site of 1934 Bihar-Nepal great earthquake of M 8.4, is presently experiencing N-S to NE-SW directed compressive stresses. The inferred pattern of compression axes in Western Nepal region suggests a shallow compressive stress, dipping N-S to NE-SW. Approximately similar nature of the stress regime is observed in Western and Eastern regions of Nepal, separated by nearly 700 km; it shows N-S to NNE-SSW direction of compression and underthrusting of the Indian Plate beneath the Himalaya at a shallow angle. Present study indicates that the stress is being released along the strikes of some of the transverse faults present in the region since the compressive stress exerted by the northward movement of the Indian Plate is approximately perpendicular to the Himalayan collision belt. Unilateral stress pattern generated by the northward movement of the Indian Plate in the central part of the Himalaya reveals that the present day collision occurs roughly perpendicular to the local strike of the Himalaya.  相似文献   

20.
章杰  臧绍先 《地震学报》1986,8(3):240-253
利用1965——1981年mb4.0的580个地震,研究了中、缅、印交界地区的地震空间分布特征,得到地震主要在阿萨姆块体周围及凹向块体的断裂带上成带或成群分布;在缅甸北部大约由20N到26N存在倾斜地震带,其倾向由南到北逐渐由东转向南东东,其倾角由30变为50;地震带厚度为20——30km;作了38个地震的机制解,机制解表明,在缅甸北部、阿萨姆块体及其相邻地区压力轴为北东方向且近于水平,反映了印度板块以北东方向挤压欧亚板块.   相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号