共查询到20条相似文献，搜索用时 140 毫秒
1.
从探地雷达GPR(Ground Penetrating Radar)在土壤污染探测中的应用、污染土壤介电常数模型的演化和土壤介电常数求取三方面综述了目前国内外学者利用探地雷达技术开展的土壤污染探测研究.研究认为以土壤介电常数为纽带,采用适宜的方法从雷达回波信号求得介电常数,基于合理的土壤介电常数模型,通过神经网络技术,可驯化建立介电常数和污染土壤多个参数之间联系,从而实现污染土壤中多种污染物含量的监测. 相似文献
2.
本文将水质预测及水污染控制措施有机地结合，选取水环境容量和污染指数作为水污染控制的参数，这样，一给对流－扩散水质方程的求解除就是实现本研究目的的关键，本研究彩和的模型在现有的水质模型基础上有所改进，因为其采用四点隐格式对水质进行预测，推求可接给污染物的环境容量值有为保证水质而陷定的污染物浓度值，从而制定相应的水污染控制措施，为整体考虑各种污染物的情况，建议彩和河流的污染指数进而推求综合污染指数，总之，本研究为水质保护提供了科学的计算方法，该法对水污染及污水对河道水质的影响是实用有效的。 相似文献
3.
重点阐述了生物表面活性剂清洗土壤有机污染物的机理及影响因素。根据国内外最新文献．对使用生物表面活性剂溶液修复有机物污染土壤的研究进展进行了综述。并展望了生物表面活性剂在清洗土壤有机污染物中的研究前景。 相似文献
4.
5.
6.
城市降雨径流污染是城市水质恶化的重要原因之一,定量计算城市降雨径流污染负荷,是实施城市水环境污染总量控制管理的基础和关键,可为城市水环境治理和污染控制提供科学依据.本文以污染物累积冲刷理论为基础,提出了“特征面积”的概念和计算公式,建立了场次降雨径流污染负荷数学模型,并结合案例,对数学模型在有效性、预测精度、适用性和局限性等方面进行评价.结果表明,特征面积较好地反映了污染物在各类土地上的污染负荷特性,场次降雨径流污染负荷与特征面积和降雨量的乘积呈正比.利用3场及以上降雨径流污染负荷结果,可较好地率定模型,从而可快速且较准确地估算单场次降雨径流污染负荷.该方法简单实用,获取数据工作量小,适用地区广.对于小降雨事件,建议采用降雨量相近的观测结果对模型进行率定,以提高模型的预测精度. 相似文献
7.
体应变潮汐观测资料信息提取与映震效果 总被引：2，自引：0，他引：2
根据体应变观测资料的特点, 研究了体应变观测资料的处理方法, 提出了在时间域分析的数学模型。在数学模型中, 将潮汐因子、气压系数、非潮汐应变速率和加速度一并考虑, 在资料处理结果中, 这些参数可同时取得。分别用时间域分析方法和频率域分析方法对观测数据进行了处理, 发现潮汐因子、气压系数、应变速率和加速度等参数在大同地震前均有大小不同、持续时间不等的异常, 这些参数可作为物理意义明确的地震中短期预测的指标。 相似文献
8.
人类活动和社会经济迅速发展导致大量化学品排放进入地表水环境,对水生生态系统和人类健康产生诸多不利影响,如何从众多的化学品中筛选识别出具有潜在危害的优先污染物是水污染治理和管控的关键.本研究基于污染物环境暴露水平、持久性、生物累积性、生态风险和人体健康风险5个评价参数,构建多指标综合评分法定量筛选识别地表水环境优先污染物类别,并应用于涨渡湖水体中优先污染物清单的建立.污染物环境暴露水平基于靶向分析综合考虑了污染物环境实测浓度和检出频率.目标污染物持久性和生物累积性毒害性参数分别采用生物降解系数和正辛醇-水分配系数来表征.此外在物种敏感度分布法和评估因子法的基础上计算生态风险熵以定量表征生态风险,人体健康风险则由终生致癌风险指数或危害指数来表征.基于该多指标综合评分法可于涨渡湖水体7类151种特征污染物中筛查出41种优先污染物,主要包括11种多氯联苯、8种有机氯农药、6种多环芳烃、4种邻苯二甲酸酯、4种挥发性有机物和8种金属元素.鉴于不同地表水环境污染状况不同,通过多指标综合评分法可建立因地制宜的优先污染物清单,从而有利于形成以保护水生生物和人类健康为最终目标的优先污染物水质基准,为地表水环境污染物管控及治理提供方法学支撑和科学依据. 相似文献
9.
采用适用于无资料流域、参数较少的SCS模型计算抚仙湖集水域地表径流量.模型考虑了集水域下垫面条件的空间差异,利用Maplnfo/Arc view软件按照土地利用方式与土壤类型的不同,把集水域划分为若干个水文响应单元,分别计算产流量,较准确地模拟了入湖径流量.通过对梁王河流域和大鲫鱼沟流域实测降雨径流资料的分析与反演,提出了适合该区域的产流计算CN值.在对CN值作坡度修正后再应用到其它无观测数据区域.通过模型计算得到的抚仙湖集水域2005年3月1日-2006年2月28日地表径流量为1.74×108 m3,陆面径流系数为0.395.模型为指导抚仙湖集水域径流观测及入湖污染物负荷的计算提供依据. 相似文献
10.
11.
Evaluation of Mass Flux to and from Ground Water Using a Vertical Flux Model (VFLUX): Application to the Soil Vacuum Extraction Closure Problem 总被引：1，自引：1，他引：0
Dominic C. DiGiulio Varadhan Ravi Mark L. Brusseau 《Ground Water Monitoring & Remediation》1999,19(2):96-104
Site closure for soil vacuum extraction (SVE) application typically requires attainment or specified soil concentration standards based on the premise that mass flux from the vadose zone to ground water not result in levels exceeding maximum contaminant levels (MCLs). Unfortunately, realization of MCLs in ground water may not be attainable at many sites. This results in soil remediation efforts that may be in excess of what is necessary for future protection of ground water and soil remediation goals which often cannot be achieved within a reasonable time period. Soil venting practitioners have attempted to circumvent these problems by basing closure on some predefined percent total mass removal, or an approach to a vapor concentration asymptote. These approaches, however, are subjective and influenced by venting design. We propose an alternative strategy based on evaluation of five components: (1) site characterization, (2) design. (3) performance monitoring, (4) rule-limited vapor transport, and (5) mass flux to and from ground water. Demonstration of closure is dependent on satisfactory assessment of all five components. The focus of this paper is to support mass flux evaluation. We present a plan based on monitoring of three subsurface zones and develop an analytical one-dimensional vertical flux model we term VFLUX. VFLUX is a significant improvement over the well-known numerical one-dimensional model. VLEACH, which is often used for estimation of mass flux to ground water, because it allows for the presence of nonaqueous phase liquids (NAPLs) in soil, degradation, and a lime-dependent boundary condition at the water table inter-face. The time-dependent boundary condition is the center-piece of our mass flux approach because it dynamically links performance of ground water remediation lo SVE closure. Progress or lack of progress in ground water remediation results in either increasingly or decreasingly stringent closure requirements, respectively. 相似文献
12.
Desorption is one of the most critical processes affecting the effectiveness of soil and ground water remediation. None of the currently adopted desorption models can accurately quantify desorption of low-hydrophobicity organic chemicals, and thus could potentially mislead remediation design and decision-making. A recently developed dual-equilibrium desorption (DED) model was found to be much more accurate in quantifying desorption. A screening-level transport model, DED-Transport, was developed to simulate the DED effect on behaviors of organic contaminant plumes during remediation. DED-Transport requires only simple parameters, but is applicable to many remediation scenarios. DED-Transport can be used as a decision-support tool in site remediation to more precisely predict the time required for cleanup. 相似文献
13.
《Ground Water Monitoring & Remediation》2000,20(1):94-103
Reagents that enhance the aqueous solubility of non-aqueous phase organic liquid (NAPL) contaminants are under investigation for use in enhanced subsurface remediation technologies. Cyclodextrin, a glucose-based molecule, is such a reagent. In this paper, laboratory experiments and numerical model simulations are used to evaluate and understand the potential remediation performance of cyclodextrin. Physical properties of cyclodextrin solutions such as density, viscosity, and NAPL-aqueous inter-facial tension are measured. Our analysis indicates that no serious obstacles exist related to fluid properties that would prevent the use of cyclodextrin solutions for subsurface NAPL remediation. Cyclodextrin-enhanced solubilization for a large suite of typical ground water contaminants is measured in the laboratory, and the results are related to the physicochemical properties of the organic compounds. The most-hydrophobic contaminants experience a larger relative solubility enhancement than the less-hydrophobic contaminants but have lower aqueous-phase apparent solubilities. Numerical model simulations of enhanced-solubilization flushing of NAPL-contaminated soil demonstrate that the more-hydrophilic compounds exhibit the greatest mass-removal rates due to their greater apparent solubilities, and thus are initially more effectively removed from soil by enhanced-solubilization-flushing reagents. However, the relatively more hydrophobic contaminants exhibit a greater improvement in contaminant mass-removal (compared with water flushing) than that exhibited for the relatively hydrophilic contaminants. 相似文献
14.
Robert E. Hinchee Paul R. Dahlen Paul C. Johnson David R. Burris 《Ground Water Monitoring & Remediation》2018,38(2):40-48
1,4‐Dioxane is totally miscible in water, sequestering in vadose pore water that can serve as a source of long‐term groundwater contamination. Although some 1,4‐dioxane is removed by conventional soil vapor extraction (SVE), remediation is typically inefficient. SVE efficiency is hindered by low Henry’s Law constants at ambient temperature and redistribution to vadose pore water if SVE wells pull 1,4‐dioxane vapors across previously clean soil. It was hypothesized that heated air injection and more focused SVE extraction (“Enhanced SVE” or XSVE) could increase the efficiency of 1,4‐dioxane vadose treatment, and this new process was tested at former McClellan Air Force Base, CA. The XSVE system had four peripheral heated air injection wells surrounding a 6.1 m × 6.1 m × 9.1 m deep treatment zone with a central vapor extraction well. After 14 months of operation, soil temperatures reached as high as ~90 °C near the injection wells and the treatment zone was flushed with ~20,000 pore volumes of injected air. Post‐treatment sampling results showed reductions of ~94% in 1,4‐dioxane and ~45% in soil moisture. Given the simplicity of the remediation system components and the promising demonstration test results, XSVE has the potential to be a cost‐effective remediation option for vadose zone soil containing 1,4‐dioxane. 相似文献
15.
The Application of In Situ Air Sparging as an Innovative Soils and Ground Water Remediation Technology 总被引：3，自引：0，他引：3
Michael C. Marley David J. Hazebrouck Matthew T. Walsh 《Ground Water Monitoring & Remediation》1992,12(2):137-145
Vapor extraction (soil venting) has been demonstrated to be a successful and cost-effective remediation technology for removing VOCs from the vadose (unsaturated) zone. However, in many cases, seasonal water table fluctuations, drawdown associated with pump-and-treat remediation techniques, and spills involving dense, non-aqueous phase liquids (DNAPLS) create contaminated soil below the water table. Vapor extraction alone is not considered to be an optimal remediation technology to address this type of contamination.
An innovative approach to saturated zone remediation is the use of sparging (injection) wells to inject a hydrocarbon-free gaseous medium (typically air) into the saturated zone below the areas of contamination. The contaminants dissolved in the ground water and sorbed onto soil particles partition into the advective air phase, effectively simulating an in situ air-stripping system. The stripped contaminants are transported in the gas phase to the vadose zone, within the radius of influence of a vapor extraction and vapor treatment system.
In situ air sparging is a complex multifluid phase process, which has been applied successfully in Europe since the mid-1980s. To date, site-specific pilot tests have been used to design air-sparging systems. Research is currently underway to develop better engineering design methodologies for the process. Major design parameters to be considered include contaminant type, gas injection pressures and flow rates, site geology, bubble size, injection interval (areal and vertical) and the equipment specifications. Correct design and operation of this technology has been demonstrated to achieve ground water cleanup of VOC contamination to low part-per-billion levels. 相似文献
An innovative approach to saturated zone remediation is the use of sparging (injection) wells to inject a hydrocarbon-free gaseous medium (typically air) into the saturated zone below the areas of contamination. The contaminants dissolved in the ground water and sorbed onto soil particles partition into the advective air phase, effectively simulating an in situ air-stripping system. The stripped contaminants are transported in the gas phase to the vadose zone, within the radius of influence of a vapor extraction and vapor treatment system.
In situ air sparging is a complex multifluid phase process, which has been applied successfully in Europe since the mid-1980s. To date, site-specific pilot tests have been used to design air-sparging systems. Research is currently underway to develop better engineering design methodologies for the process. Major design parameters to be considered include contaminant type, gas injection pressures and flow rates, site geology, bubble size, injection interval (areal and vertical) and the equipment specifications. Correct design and operation of this technology has been demonstrated to achieve ground water cleanup of VOC contamination to low part-per-billion levels. 相似文献
16.
Marvin Kirshner Nicholas C. Pressly Robert J. Roth 《Ground Water Monitoring & Remediation》1996,16(1):73-79
This report summarizes the initial results of subsurface remediation at Terminal 1, Kenneth International Airport, to remediate soil and ground water contaminated with Jet A fuel. The project was driven and constrained In the const ruction schedule of a major new terminal at the facility. The remediation system used a combination of ground water pumping, air injection, and soil vapor extraction. In the first five months of operation, the combined processes of dewatering, volatilization, and biodegradation removed a total of 36,689 pounds of total volatile and semivolatile organic jet fuel hydrocarbons from subsurface soil and ground water. The. results of this case study have shown that 62 percent of the removal resulted from biodegradation, 21 percent occurred as a result of liquid removal, and 11 percent resulted from the extraction of volatile organic compounds (VOC's). 相似文献
17.
Jack Parker Ungtae Kim Peter K. Kitanidis Michael Cardiff Xiaoyi Liu 《Ground Water Monitoring & Remediation》2010,30(3):65-78
This paper investigates numerical optimization of dense nonaqueous phase liquid (DNAPL) site remediation design considering effects of prediction and measurement uncertainty. Results are presented for a hypothetical problem involving remediation using thermal source reduction (TSR) and bioremediation with electron donor (ED) injection. Pump-and-treat is utilized as a backup measure if compliance criteria are not met. Remediation system design variables are optimized to minimize expected net present value (ENPV) cost. Adaptive criteria are assumed for real-time control of TSR and ED duration. Source zone dissolved concentration data enabled more reliable and lower cost operation of TSR than soil concentration data, but using both soil and dissolved data improved results sufficiently to more than offset the additional cost. Decisions to terminate remediation and monitoring or to initiate pump-and-treat are complicated by measurement noise. Simultaneous optimization of monitoring frequency, averaging period, and lookback periods to confirm decisions, in addition to remediation design variables, reduced ENPV cost. Results indicate that remediation design under conditions of uncertainty is affected by subtle interactions and tradeoffs between design variables, compliance rules, site characteristics, and uncertainty in model predictions and monitoring data. Optimized designs yielded cost savings of up to approximately 50% compared with a nonoptimized design based on common engineering practices. Significant improvements in accuracy and reductions in cost were achieved by recalibrating the model to data collected during remediation and re-optimizing design variables. Repeating this process periodically is advisable to minimize total costs and maximize reliability. 相似文献
18.
Data assimilation for distributed hydrological catchment modeling via ensemble Kalman filter 总被引：4，自引：0，他引：4
Catchment scale hydrological models are critical decision support tools for water resources management and environment remediation. However, the reliability of hydrological models is inevitably affected by limited measurements and imperfect models. Data assimilation techniques combine complementary information from measurements and models to enhance the model reliability and reduce predictive uncertainties. As a sequential data assimilation technique, the ensemble Kalman filter (EnKF) has been extensively studied in the earth sciences for assimilating in-situ measurements and remote sensing data. Although the EnKF has been demonstrated in land surface data assimilations, there are no systematic studies to investigate its performance in distributed modeling with high dimensional states and parameters. In this paper, we present an assessment on the EnKF with state augmentation for combined state-parameter estimation on the basis of a physical-based hydrological model, Soil and Water Assessment Tool (SWAT). Through synthetic simulation experiments, the capability of the EnKF is demonstrated by assimilating the runoff and other measurements, and its sensitivities are analyzed with respect to the error specification, the initial realization and the ensemble size. It is found that the EnKF provides an efficient approach for obtaining a set of acceptable model parameters and satisfactory runoff, soil water content and evapotranspiration estimations. The EnKF performance could be improved after augmenting with other complementary data, such as soil water content and evapotranspiration from remote sensing retrieval. Sensitivity studies demonstrate the importance of consistent error specification and the potential with small ensemble size in the data assimilation system. 相似文献
19.
Falta RW 《Ground water》2008,46(2):272-285
It is often difficult at contaminated sites to decide whether remediation effort should be focused on the contaminant source, the dissolved plume, or on both zones. The decision process at these sites is hampered by a lack of quantitative tools for comparing remediation alternatives. A new screening-level mass balance approach is developed for simulating the transient effects of simultaneous ground water source and plume remediation. The contaminant source model is based on a power function relationship between source mass and source discharge, and it can consider partial source remediation at any time after the initial release. The source model serves as a time-dependent mass flux boundary condition to a new analytical plume model, where flow is assumed to be one dimensional, with three-dimensional dispersion. The plume model simulates first-order sequential decay and production of several species, and the decay rates and parent/daughter yield coefficients are variable functions of time and distance. This new method allows for flexible simulation of natural attenuation or remediation efforts that enhance plume degradation. The plume remediation effort may be temporary or delayed in time, limited in space, and it may have different chemical effects on different contaminant species in the decay chain. 相似文献
20.
David A. Edwards Vincent B. Dick James W. Little Susan L. Boyle 《Ground Water Monitoring & Remediation》2001,21(3):64-70
Refractive flow and treatment (RFT) systems are designed for passive or low-maintenance in situ ground water remediation for rock or soil of low to moderate permeability. An RFT system captures and refracts contaminated ground water and conveys it to an in situ permeable treatment zone without the need for pumping. Flow to the treatment zone is through one or more high-permeability collection cells, and flow from the treatment zone back into the adjacent native media is through one or more high-permeability dispersal cells.
Conceptual, analytical, and numerical modeling demonstrates the potential for RFT systems to be successful. Analytical modeling shows that the most important factor for this success is that RFT system components be engineered to have comparatively high hydraulic conductivities. A numerical model, capable of representing site-specific conditions, is required for actual RFT system design. 相似文献
Conceptual, analytical, and numerical modeling demonstrates the potential for RFT systems to be successful. Analytical modeling shows that the most important factor for this success is that RFT system components be engineered to have comparatively high hydraulic conductivities. A numerical model, capable of representing site-specific conditions, is required for actual RFT system design. 相似文献