共查询到20条相似文献，搜索用时 167 毫秒
1.
2.
用碳纤维布改善混凝土小型空心砌块墙体抗震性能的试验研究 总被引：10，自引：0，他引：10
通过4片碳纤维布加固混凝土小型空心砌块墙体在周期反复荷载作用下受力性能的试验，研究了用粘贴碳纤维布来增强混凝土小型空心砌块墙体抗震能力这种加固方法的有效性。本文研究了碳纤维布加固混凝土小型空心砌块墙体的受力特性，分析了碳纤维布不同用量对混凝土小型空心砌块墙体抗震加固效果的影响。在此基础上，本文提出了碳纤维布加固混凝土小型空心砌块墙体抗剪承载力的简化计算方法，可供实际抗震加固工程设计参考。 相似文献
3.
4.
5.
以嵌缝胶泥作为嵌缝材料,针对不同高宽比和不同配筋率的6片墙体进行了拟静力试验,探讨了嵌筋加固砖砌体墙的破坏特征、变形能力、承载能力、耗能能力、滞回特征及刚度退化等抗震性能,建立了以试验为基础的嵌筋加固砖砌体墙的抗剪承载力计算公式。研究结果表明:高宽比为1.8的试件,嵌筋墙体较无筋墙体水平抗剪极限承载力提高了17%~31%,延性提高了54%~83%;高宽比为0.5的试件,嵌筋墙体较无筋墙体水平抗剪极限承载力提高了13%~17%,延性提高了17%~20%,嵌筋加固墙体滞回环饱满,耗能能力有较大幅度提高,破坏形式由脆性破坏转变为延性破坏,嵌筋对墙体初始刚度的影响较小,给出的抗剪承载力公式计算值与试验值接近,为工程应用奠定了基础。 相似文献
6.
地震时砌体结构窗间墙易发生破坏,为了提高其抗震性能,对高宽比为1的2组共4片墙体,其中:2片为双层打包带加固墙体,2片为原墙,进行了拟静力试验,研究墙体的破坏形态、水平承载力、滞回曲线和耗能等抗震性能。试验发现原墙发生剪切破坏,加固后墙体发生摇摆破坏,加固改变了墙体破坏模式,加固后墙体滞回曲线饱满但有捏笼,破坏荷载、延性和耗能能力都有提高,破坏时未发生剥离,表明双层打包带加固法有效地提高了窗间墙体抗震性能,对承受较大竖向应力墙体效果更好,建议加固时要加强加固层与窗下和窗上墙体的连接。 相似文献
7.
8.
通过24片1/2模型的空斗墙墙体和3片1/2模型的实砌墙体,在低周反复荷载下试验,研究3种砌筑方式的空斗墙在2种高宽比、4种砂浆强度和2种竖向压应力的影响下,墙体的抗剪承载力和破坏模式。建立有限元分析模型,分析砌筑方式、材料强度、高宽比和竖向压应力对空斗墙抗剪性能的影响。研究表明:不同砌筑方式的空斗墙极限荷载接近,约为实砌墙体的60%～85%;抗剪承载力随着砖和砂浆强度的提高而增大;抗剪承载力随着高宽比的增大而减小,破坏模式从剪切破坏转变为弯曲破坏;当N/Nu=0.6左右时,抗剪承载力最大。在此基础上提出空斗墙的抗剪强度计算公式。 相似文献
9.
通过9片HPFL(High Performance Ferrocement Laminate)条带加固空斗墙与5片未加固的对比墙体,在低周反复荷载下试验,研究采用不同的HPFL条带加固方式对不同砌筑方式、不同强度砌筑砂浆的空斗墙在不同竖向压应力下的抗震承载力和破坏形式的影响.采用有限元计算软件AN-SYS建立HPFL条带加固空斗墙的有限元模型,分析加固条带宽度、加固面层砂浆强度、加固层钢筋网格尺寸、砌筑砂浆强度、墙体高宽比和竖向压应力等因素对加固效果的影响.研究表明:HPFL条带加固法是一种提高空斗墙抗震性能的有效方法;加固条带宽度对HPFL条带加固性能的影响最大;加固面层砂浆强度的提高,墙体的抗震承载力随之提高;加固层钢筋网格尺寸加密,对墙体承载力提高较小;不同砂浆强度砌筑的墙体,HPFL条带加固效果的发挥情况有所不同;HPFL条带圈梁构造柱式加固方式对各种高宽比和各种竖向压应力下的空斗墙都是有效的. 相似文献
10.
碳纤维布用于砖砌体抗震加固的试验研究 总被引：49，自引：1，他引：49
通过4片碳纤维布加固砖砌体在周期反复荷载作用下受力性能的试验，研究了粘贴碳纤维布来增强砖砌体抗震能力这种加固方法的有效性。本文研究了碳纤维布加固砖砌体的受力特性，分析了碳纤维布的用量以及贴布方式等因素对砖砌体抗震加固效果的影响。在此基础上，本文提出了碳纤维布加固砖砌体抗剪承载力的简化计算方法，可以满足实际工程设计的要求。 相似文献
11.
Masonry buildings are primarily constructed out of bricks and mortar which become discrete pieces and cannot sustain horizontal forces created by a strong earthquake.The collapse of masonry walls may cause significant human casualties and economic losses.To maintain their integrity,several methods have been developed to retrofit existing masonry buildings,such as the constructional RC frame which has been extensively used in China.In this study,a new method using precast steel reinforced concrete(PSRC)panels is developed.To demonstrate its effectiveness,numerical studies are conducted to investigate and compare the collapse behavior of a structure without retrofitting,retrofitted with a constructional RC frame,and retrofitted with external PSRC walls(PSRCW).Sophisticated finite element models(FEM)were developed and nonlinear time history analyses were carried out.The results show that the existing masonry building is severely damaged under occasional earthquakes,and totally collapsed under rare earthquakes.Both retrofitting techniques improve the seismic performance of existing masonry buildings.However,it is found that several occasional earthquakes caused collapse or partial collapse of the building retrofitted with the constructional RC frame,while the one retrofitted by the proposed PSRC wall system survives even under rare earthquakes.The effectiveness of the proposed retrofitting method on existing masonry buildings is thus fully demonstrated. 相似文献
12.
首先介绍了CFRP加固受损钢筋混凝土柱的数值模拟方法,通过OpenSees软件进行了建模分析,数值模拟结果与试验结果的对比验证了该数值模型的有效性;其次,对一6层钢筋混凝土框架以受极罕遇地震影响进行预损,采用损伤指数和折减系数的方法建立震损钢筋混凝土框架的分析模型,并选择5种不同的CFRP加固方案对其进行加固;最后,对CFRP加固的震损RC框架进行增量动力分析。定量的评价了CFRP加固震损RC框架的抗整体性倒塌能力和抗倒塌安全储备。结果表明:CFRP加固能有效提高震损钢筋混凝土框架结构的抗震性能。加固部位的选择对加固效果的影响很大,在所选用的5种CFRP加固方案中,对底层及第2层的梁柱进行加固的方案对提高震损钢筋混凝土框架的抗整体性倒塌能力效果最佳。 相似文献
13.
Stefano De Santis Paolo Casadei Gerardo De Canio Gianmarco de Felice Marialaura Malena Marialuisa Mongelli Ivan Roselli 《地震工程与结构动力学》2016,45(2):229-251
An innovative solution for the seismic protection of existing masonry structures is proposed and investigated through shake table tests on a natural scale wall assemblage. After a former test series carried out without reinforcement, the specimen was retrofitted using Steel Reinforced Grout. The strengthening system comprises horizontal strips of ultra‐high strength steel cords, externally bonded to the masonry with hydraulic lime mortar, and connectors to transversal walls, applied within the thickness of the plaster layer. In order to assess the seismic performance of the retrofitted wall, natural accelerograms were applied with increasing intensity up to failure. Test results provide a deep understanding of the effectiveness of mortar‐based composites for improving the out‐of‐plane seismic capacity of masonry walls, in comparison with traditional reinforcements with steel tie‐bars. The structural implications of the proposed solution in terms of dynamic properties and damage development under earthquake loads are also discussed.Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
14.
Thousands of buildings were damaged by the devastating Chi‐Chi earthquake on September 21, 1999. Of all the public buildings, school buildings are the most vulnerable to earthquake damage, and the retrofitting of existing school buildings becomes a stringent issue. In addition to cost effectiveness, the impact of retrofitting methods on the functions of the school buildings needs to be considered. This paper therefore proposes the retrofitting of school buildings by adding sandwich columns onto partition brick walls. The sandwich column is divided into two parts and is added to the two sides of the partition brick wall held with pairs of U‐shaped bars. The retrofit does not require the removal of windows or doors in the longitudinal direction making the proposed method cost effective and minimizes the impact on the function of the school buildings. Five full‐scale specimens without and with retrofitting were designed and fabricated for testing based on the partition brick wall frames of the existing school buildings. The specimens were subjected to cyclic loading in the out‐of‐plane direction through a loading frame so that the columns deformed with double curvatures. The experimental results verified the feasibility of the proposed retrofit method. The data showed that the lateral strength of the retrofitted specimen doubled that which was not and that the residual strength of the retrofitted specimen was just as high as the ultimate strength of the specimen without retrofitting. The analytical results in lateral strength yielded conservative figures compared with experimental measurements. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
15.
砌体墙弹性计算采用的无转动假定与砌体房屋震害中所表现的墙体破坏模式不完全相符,砌体墙的转动变形是墙体受力过程中总变形的重要组成部分,转动失效也是一种典型的破坏模式。在前期试验研究基础上,进行了3片足尺门窗间砌体墙试件的低周反复荷载试验,立面形状为“凸”形和“L”形,介绍了试件的破坏过程及转动现象,分析了试件的滞回曲线和承载力差异;探讨了门窗间砌体窗间墙的转动变形机理,并分析了材料强度、竖向荷载和立面形状等因素对砌体墙转动变形的影响。研究结果表明:本文荷载及约束条件下,门窗间砌体墙试件均表现出明显的转动失效特征,属于窗间墙转动或窗间墙连带窗下墙整体转动失效的破坏模式;砌体墙发生受剪破坏或转动失效的关键在于窗间墙水平截面的受剪能力是否大于其受到的水平荷载;砌体材料强度越高、高宽比越大和立面对称性越差,砌体墙越容易出现转动变形现象以及发生转动失效,反之则容易发生受剪破坏。本文试验以及研究内容关注了门窗间砌体墙在受力全过程中实际存在而又常常被忽略的转动变形问题,试验数据及研究结论可为更加深入地了解砌体墙的变形机制提供参考。 相似文献
16.
Juan C. Reyes Francisco A. Galvis Luis E. Yamin Cristian Gonzalez Juan D. Sandoval Pablo Heresi 《地震工程与结构动力学》2019,48(8):888-909
Historic adobe structures pose a high seismic risk mainly because of the poor out-of-plane bending response of their walls that may produce fatalities and significant economic, cultural, and heritage losses. In this paper, we propose a retrofitting technique that increases the wall strength for both in-plane and out-of-plane directions. This technique consists of vertical and horizontal timber elements symmetrically installed on each face of the wall to form a confining wood frame, supplemented with vertical tensors that pre-compress the wall. This study evaluates the performance of this retrofitting technique with a two-set experimental program on full-scale historic adobe walls. On the first set, four specimens were subjected to a static overturning test with boundary conditions representing the confinement effect at both ends by orthogonal walls. On the second set, three full-scale specimens, one unretrofitted and two retrofitted, were subjected to four ground motion records on a shaking table to assess the out-of-plane dynamic behavior of typical corner walls. The unretrofitted specimen collapsed during the second motion (peak ground acceleration [PGA] = 0.39 g), while both retrofitted walls survived all four motions (maximum PGA of 0.75 g) proving the high effectiveness of the proposed retrofitting. The addition of base anchors as a variation of the retrofitting technique significantly reduced the rocking effects and the residual drifts of the system, thus improving its overall seismic performance. Further research is needed to develop guidelines for seismic retrofit of heritage buildings including multistory full-scale tests of specimens with various types of openings and retrofitting strategies that minimize their architectural impact. 相似文献
17.
Large number of vulnerable reinforced concrete (RC) buildings exists in earthquake prone areas. These low cost residential
and/or commercial buildings, which are three to seven-stories high, usually do not receive essential engineering services
during the construction phase. Finding cheap, easily applicable and occupant friendly retrofitting techniques are extremely
important to reduce the seismic risk of these buildings. As an attempt to this, a particular type of high strength clay brick
is studied to evaluate its potential for the structural retrofitting. A set of experiment was conducted to assess the important
mechanical characteristics of the infill walls made from these bricks. Also the performance of two RC frames retrofitted with
these walls, having different connection details between the wall and RC members was examined experimentally. The analytical
nonlinear static analyses of these specimens have been performed using SeismoStruct to achieve some model parameters for representing
the “infill wall model” in the program. Adaptive pushover and nonlinear time history analyses were conducted to investigate
the performance of a six storey representative RC frame retrofitted with these walls. Evaluation of the results obtained in
these analyses prove that this retrofitting technique introduces important strength and stiffness increments to the structure,
regarding its seismic demands, which are similar to the results obtained from the experiments. 相似文献
18.
In‐plane and out‐of‐plane behavior of confined masonry walls for various toothing and openings details and prediction of their strength and stiffness 
下载免费PDF全文
下载免费PDF全文 Eight half‐scale brick masonry walls were tested to study two important aspects of confined masonry (CM) walls related to its seismic behavior under in‐plane and out‐of‐plane loads. Four solid wall specimens tested to investigate the role of type of interface between the masonry and tie‐columns, such as toothing varying from none to every course. The other four specimens with openings were tested to study the effectiveness of various strengthening options around opening to mitigate their negative influence. In the set of four walls, one wall was infilled frame while the other three were CM walls of different configurations. The experimental results were further used to determine the accuracy of various existing models in predicting the in‐plane response quantities of CM walls. Confined masonry walls maintained structural integrity even when severely damaged and performed much better than infill frames. No significant effect of toothing details was noticed although toothing at every brick course was preferred for better post‐peak response. For perforated walls, provision of vertical elements along with continuous horizontal bands around openings was more effective in improving the overall response. Several empirical and semi‐empirical equations are available to estimate the lateral strength and stiffness of CM walls, but those including the contribution of longitudinal reinforcement in tie‐columns provided better predictions. The available equations along with reduction factors proposed for infills could not provide good estimates of strength and stiffness for perforated CM walls. However, recently proposed relations correlating strength/stiffness with the degree of confinement provided reasonable predictions for all wall specimens. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
19.
20.
A retrofitting technology using precast steel reinforced concrete (PSRC) panels is developed to improve the seismic performance of old masonry buildings. The PSRC panels are built up as an external PSRC wall system surrounding the existing masonry building. The PSRC walls are well connected to the existing masonry building, which provides enough confinement to effectively improve the ductility, strength, and stiffenss of old masonry structures. The PSRC panels are prefabricated in a factory, significantly reducing the situ work and associated construction time. To demonstrate the feasibility and mechanical effectivenss of the proposed retrofitting system, a full-scale five-story specimen was constructed. The retrofitting process was completed within five weeks with very limited indoor operation. The specimen was then tested in the lateral direction, which could potentially suffer sigifnicant damage in a large earthquake. The technical feasibility, construction workability, and seismic performance were thoroughly demonstrated by a full-scale specimen construction and pseudo-dynamic tests. 相似文献