共查询到20条相似文献，搜索用时 31 毫秒
1.
The dependence of elastic moduli of shales on the mineralogy and microstructure of shales is important for the prediction of sweet spots and shale gas production. Based on 3D digital images of the microstructure of Longmaxi black shale samples using X-ray CT, we built detailed 3D digital images of cores with porosity properties and mineral contents. Next, we used finite-element (FE) methods to derive the elastic properties of the samples. The FE method can accurately model the shale mineralogy. Particular attention is paid to the derived elastic properties and their dependence on porosity and kerogen. The elastic moduli generally decrease with increasing porosity and kerogen, and there is a critical porosity (0.75) and kerogen content (ca. ≤3%) over which the elastic moduli decrease rapidly and slowly, respectively. The derived elastic moduli of gas- and oil-saturated digital cores differ little probably because of the low porosity (4.5%) of the Longmaxi black shale. Clearly, the numerical experiments demonstrated the feasibility of combining microstructure images of shale samples with elastic moduli calculations to predict shale properties. 相似文献
2.
Shales comprise more than 60% of sedimentary rocks and form natural seals above hydrocarbon reservoirs. Their sealing capacity is also used for storage of nuclear wastes. The world's most important conventional oil and gas reservoirs have their corresponding source rocks in shale. Furthermore, shale oil and shale gas are the most rapidly expanding trends in unconventional oil and gas. Shales are notorious for their strong elastic anisotropy, i.e., so‐called vertical transverse isotropy. This vertical transverse isotropy, characterised by a vertical axis of invariance, is of practical importance as it is required for correct surface seismic data interpretation, seismic to well tie, and amplitude versus offset analysis. A rather classical paradigm makes a clear link between compaction in shales and the alignment of the clay platelets (main constituent of shales). This would imply increasing anisotropy strength with increasing compaction. Our main purpose is to check this prediction on two large databases in shaly formations (more than 800 samples from depths of 0–6 km) by extracting the major trends in the relation between seismic anisotropy and compaction. The statistical analysis of the database shows that the simultaneous increase in density and velocity, a classical compaction signature, is quite weakly correlated with the anisotropy strength. As a consequence, compaction can be excluded as a major cause of seismic anisotropy, at least in shaly formations. Also, the alignment of the clay platelets can explain most of the anisotropy measurements of both databases. Finally, a method for estimating the orientation distribution function of the clay platelets from the measurement of the anisotropy parameters is suggested. 相似文献
3.
页岩中的TOC(Total Organic Carbon,总有机碳)含量,对页岩的有效弹性模量以及与之相关的弹性波速度(P波和S波)有重要影响,建立弹性模量与TOC含量关系是页岩气甜点预测的重要手段之一.CS和SM两种固体置换理论主要针对孔隙度较大的砂岩,能否适用于孔隙度低、孔隙形态复杂和非均质性强的页岩目前尚未深入研究.鉴于目前已知的富有机质页岩的TOC赋存形态与裂缝以及孔隙形态类似,有关TOC含量对岩石弹性模量的影响可视为孔隙物质充填问题来研究.本文利用数字岩心技术,构造同一数字岩心不同TOC含量的样本群,基于CS和SM两种固体替换理论模型,通过有限元(FEM)数值模拟交叉验证,详细研究了两种固体替换方程对页岩的适用性和TOC含量对页岩弹性性质的影响.研究表明,由于实际岩心孔隙及TOC分布的非均质性,CS替换方程弹性模量预测值与FEM模拟结果存在差异,而SM替换方程预测值与FEM模拟结果基本一致,两种方程的预测差异揭示页岩非均质强度,利用SM替换方程中的参数α_1,α_2,β_1和β_2可详细分析实际岩心孔隙及TOC分布的非均质特征. 相似文献
4.
Although clay is composed of disconnected anisotropic clay platelets, many rock physics models treat the clay platelets in shale as interconnected. However, the clay matrix in shales can be modelled as anisotropic clay platelets embedded within a soft isotropic interplatelet region, allowing the influence of disconnected clay platelets on the elastic properties of the clay matrix to be analysed. In this model, properties of the interplatelet region are governed by its effective bulk and shear moduli, whereas the effective properties of the clay platelets are governed by their volume fraction, aspect ratio and elastic stiffness tensor. Together, these parameters implicitly account for variations in clay and fluid properties, as well as fluid saturation. Elastic stiffnesses of clay platelets are obtained from the literature, including both experimental measurements and first-principles calculations of the full anisotropic (monoclinic or triclinic) elastic stiffness tensors of layered silicates. These published elastic stiffness tensors are used to compile a database of equivalent transverse isotropic elastic stiffness tensors, and other physical properties, for eight common varieties of layered silicates. Clay matrix anisotropy is then investigated by examining the influence of these different elastic stiffnesses, and of varying model parameters, upon the effective transverse isotropic elastic stiffness tensor of the clay matrix. The relationship between the different clay minerals and their associated anisotropy parameters is studied, and their impact on the resulting anisotropy of the clay matrix is analysed. 相似文献
5.
B. Gurevich 《Pure and Applied Geophysics》2000,157(5):811-827
6.
The shales of the Qiongzhusi Formation and Wufeng–Longmaxi Formations at Sichuan Basin and surrounding areas are presently the most important stratigraphic horizons for shale gas exploration and development in China. However, the regional characteristics of the seismic elastic properties need to be better determined. The ultrasonic velocities of shale samples were measured under dry conditions and the relations between elastic properties and petrology were systemically analyzed. The results suggest that 1) the effective porosity is positively correlated with clay content but negatively correlated with brittle minerals, 2) the dry shale matrix consists of clays, quartz, feldspars, and carbonates, and 3) organic matter and pyrite are in the pore spaces, weakly coupled with the shale matrix. Thus, by assuming that all connected pores are only present in the clay minerals and using the Gassmann substitution method to calculate the elastic effect of organic matter and pyrite in the pores, a relatively simple rock-physics model was constructed by combining the self-consistent approximation (SCA), the differential effective medium (DEM), and Gassmann’s equation. In addition, the effective pore aspect ratio was adopted from the sample averages or estimated from the carbonate content. The proposed model was used to predict the P-wave velocities and generally matched the ultrasonic measurements very well. 相似文献
7.
龙马溪组页岩是目前国内页岩气勘探的主要层位之一.由于岩石物理实验结果具有区域性,龙马溪组页岩的岩石特征与其地震弹性性质的响应规律需要开展相关的实验和理论研究工作予以明确.本研究基于系统的微观结构观察(扫描电镜和CT成像技术)和岩石物理实验来分析龙马溪组页岩样品地震弹性性质的变化规律,并依据微观结构特征建立相应的地震岩石物理表征模型.研究结果表明,石英含量对龙马溪组页岩的孔隙度以及有机碳(TOC)含量具有一定的控制作用,TOC和黄铁矿主要赋存于孔隙中;岩石骨架组成亦受控于石英或粘土含量,在石英含量大于40%(对应粘土含量小于30%)时,以石英、粘土共同作为岩石骨架,而粘土含量大于30%时,则以粘土作为岩石的骨架.因此,岩石骨架组成矿物、TOC含量、孔隙度共同制约龙马溪组页岩的地震弹性性质,富有机质储层岩石通常表现出低泊松比、低阻抗和低杨氏模量的特征,但由于支撑矿物的转换,某些富有机质页岩亦可表现为高阻抗特征.粘土矿物的定向排列仍然是造成页岩样品表现出各向异性的主要原因,各向异性参数与粘土含量具有指数关系.基于龙马溪组页岩的岩性特征及微观结构特征,可以利用自洽模型(SCA)、微分等效模量模型(DEM)和Backus平均模型的有效组合较为准确地建立龙马溪组页岩的地震岩石物理模型,实验结果和测井数据验证了模型的准确性.研究结果可为龙马溪组页岩气储层的测井解释和地震"甜点"预测提供依据. 相似文献
8.
龙马溪组页岩是目前国内页岩气勘探的主要层位之一,其静态弹性性质是影响压裂效果的重要因素,而动态弹性性质则是页岩"甜点"地震预测的重要基础.但对龙马溪组页岩动、静态弹性特征相互关系及其影响因素缺少对比研究,致使运用动态弹性性质进行"甜点"预测时存在不确定性.在对龙马溪组页岩样品系统动、静态性质联合测量基础上,分析了页岩样品动、静态弹性性质的变化规律,并讨论了成岩作用与动、静态弹性性质变化规律的因果关系.研究结果表明,龙马溪组页岩上下两段成岩过程存在明显差异,致使上段页岩在结构上表现为以塑性黏土颗粒作为受力骨架,而下段页岩在结构上逐渐转变为脆性石英颗粒作为受力骨架.页岩岩石结构特征的变化控制了动、静态弹性特征的整体变化规律,表现为动、静态杨氏模量、峰值强度等随石英含量的增大表现出近似"V"型的变化形式,而与钙质含量变化呈现正相关关系,与黏土含量变化表现出负相关性.上段页岩宏观力学性质受微观石英+黏土颗粒集合体弹性性质控制,应力应变曲线表现出明显塑性段,动、静态杨氏模量比大于1.4,破裂易于发生在黏土与石英颗粒边界形成宏观单剪型破裂模式,样品脆性低,且脆性变化不受石英含量的影响.下段页岩宏观力学性质受微观石英颗粒集合体弹性性质控制,应力应变曲线表现为弹性变形,动、静态杨氏模量比小于1.4,破裂发生在石英颗粒内部形成宏观劈裂型破裂模式,样品脆性高,且脆性变化与石英含量呈明显正相关关系.研究结果可为龙马溪页气储层的测井解释和地震"甜点"预测提供依据. 相似文献
9.
Luanxiao Zhao Xuan Qin Jinqiang Zhang Xiwu Liu De-hua Han Jianhua Geng Yineng Xiong 《Surveys in Geophysics》2018,39(3):509-541
Sweet spots identification for unconventional shale reservoirs involves detection of organic-rich zones with abundant porosity. However, commonly used elastic attributes, such as P- and S-impedances, often show poor correlations with porosity and organic matter content separately and thus make the seismic characterization of sweet spots challenging. Based on an extensive analysis of worldwide laboratory database of core measurements, we find that P- and S-impedances exhibit much improved linear correlations with the sum of volume fraction of organic matter and porosity than the single parameter of organic matter volume fraction or porosity. Importantly, from the geological perspective, porosity in conjunction with organic matter content is also directly indicative of the total hydrocarbon content of shale resources plays. Consequently, we propose an effective reservoir parameter (ERP), the sum of volume fraction of organic matter and porosity, to bridge the gap between hydrocarbon accumulation and seismic measurements in organic shale reservoirs. ERP acts as the first-order factor in controlling the elastic properties as well as characterizing the hydrocarbon storage capacity of organic shale reservoirs. We also use rock physics modeling to demonstrate why there exists an improved linear correlation between elastic impedances and ERP. A case study in a shale gas reservoir illustrates that seismic-derived ERP can be effectively used to characterize the total gas content in place, which is also confirmed by the production well. 相似文献
10.
We obtain the wave velocities of clay-bearing sandstones as a function of clay content, porosity and frequency. Unlike previous theories, based simply on slowness and/or moduli averaging or two-phase models, we use a Biot-type three-phase theory that considers the existence of two solids (sand grains and clay particles) and a fluid. The theory, which is consistent with the critical porosity concept, uses three free parameters that determine the dependence of the dry-rock moduli of the sand and clay matrices as a function of porosity and clay content.
Testing of the model with laboratory data shows good agreement between predictions and measurements. In addition to a rock physics model that can be useful for petrophysical interpretation of wave velocities obtained from well logs and surface seismic data, the model provides the differential equation for computing synthetic seismograms in inhomogeneous media, from the seismic to the ultrasonic frequency bands. 相似文献
Testing of the model with laboratory data shows good agreement between predictions and measurements. In addition to a rock physics model that can be useful for petrophysical interpretation of wave velocities obtained from well logs and surface seismic data, the model provides the differential equation for computing synthetic seismograms in inhomogeneous media, from the seismic to the ultrasonic frequency bands. 相似文献
11.
12.
页岩岩石物理建模旨在建立页岩矿物组分、微观结构、流体填充与岩石弹性参数的关系.对四川盆地龙马溪组页岩进行岩石物理建模研究,针对页岩黏土含量高、层间微裂缝发育等特点,利用Backus平均理论描述页岩黏土矿物弹性参数,利用Chapman理论计算与水平微裂缝有关的VTI各向异性,并利用Bond变换考虑地层倾角的影响.提出以黏土矿物纵、横波速度和孔隙纵横比为拟合参数进行岩石物理反演的方法,并引入贝叶斯框架减小反演的多解性.由已知的黏土矿物纵、横波速度和孔隙纵横比作为先验信息,并以测井纵、横波速度作为约束条件建立反演的目标函数,同时利用粒子群算法进行最优化搜索.计算结果表明,基于先验约束和粒子群算法的反演方法能够较准确地反演黏土矿物的弹性参数、孔隙形态参数以及裂缝密度等参数.计算得到的黏土纵、横波速度较高,并且在一定范围内变化,这可能与龙马溪组页岩的黏土矿物组分中具有较高弹性模量的伊利石含量较高有关,同时也与黏土定向排列等微观物性特征有关.反演得到的裂缝密度与纵波各向异性参数ε呈明显的正相关,而与横波各向异性参数γ相关性较小.另外,页岩各向异性参数与黏土垂向的纵横波速度有较强的相关性. 相似文献
13.
Depositional ages and characteristics of Middle–Upper Jurassic and Lower Cretaceous lacustrine deposits in southeastern Mongolia 
下载免费PDF全文
下载免费PDF全文 Hitoshi Hasegawa Hisao Ando Noriko Hasebe Niiden Ichinnorov Tohru Ohta Takashi Hasegawa Masanobu Yamamoto Gang Li Bat‐Orshikh Erdenetsogt Ulrich Heimhofer Takayuki Murata Hironori Shinya G. Enerel G. Oyunjargal O. Munkhtsetseg Noriyuki Suzuki Tomohisa Irino Koshi Yamamoto 《Island Arc》2018,27(3)
Lower Cretaceous lacustrine oil shales are widely distributed in southeastern Mongolia. Due to the high organic carbon content of oil shale, many geochemical studies and petroleum exploration have been conducted. Although most of the oil shales are considered to be Early Cretaceous in age, a recent study reveals that some were deposited in the Middle Jurassic. The present study aims at establishing depositional ages and characteristics of the Jurassic and Cretaceous lacustrine deposits in Mongolia. The Lower Cretaceous Shinekhudag Formation is about 250 m thick and composed of alternating beds of shale and dolomite. The Middle Jurassic Eedemt Formation is about 150 m thick and composed of alternating beds of shale, dolomitic marl, and siltstone. The alternations of shale and dolomite in both formations were formed by lake level changes, reflecting precipitation changes. Shales were deposited in the center of a deep lake during highstand, while dolomites were formed by primary precipitation during lowstand. Based on the radiometric age dating, the Shinekhudag Formation was deposited between 123.8 ±2.0 Ma and 118.5 ±0.9 Ma of the early Aptian. The Eedemt Formation was deposited at around 165–158 Ma of Callovian–Oxfordian. The calculated sedimentation rate of the Shinekhudag Formation is between 4.7 ±2.6 cm/ky and 10.0 ±7.6 cm/ky. Shales in the Shinekhudag Formation show micrometer‐scale lamination, consisting of algal organic matter and detrital clay mineral couplets. Given the average thickness of micro‐laminae and calculated sedimentation rate, the micro‐lamination is most likely of varve origin. Both Middle–Upper Jurassic and Lower Cretaceous lacustrine oil shales were deposited in intracontinental basins in the paleo‐Asian continent. Tectonic processes and basin evolution basically controlled the deposition of these oil shales. In addition, enhanced precipitation under humid climate during the early Aptian and the Callovian–Oxfordian was another key factor inducing the widespread oil shale deposition in Mongolia. 相似文献
14.
Differential compaction has long been used by seismic interpreters to infer subsurface geology using knowledge of the relative compaction of different types of sediments. We outline a method to infer the gross fraction of shale in an interval between two seismic horizons using sandstone and shale compaction laws. A key component of the method involves reconstruction of a smooth depositional horizon by interpolating decompacted thicknesses from well control. We derive analytic formulae for decompaction calculations using known porosity–stress relations and do not employ discrete layer iterative methods; these formulae were found to depend not only upon the gross fraction of shale but also on the clay content of the shales and the thickness of the interval. The relative merits of several interpolation options were explored, and found to depend upon the structural setting. The method was successfully applied to an oil sands project in Alberta, Canada. 相似文献
15.
提出了各向异性页岩储层统计岩石物理反演方法.通过统计岩石物理模型建立储层物性参数与弹性参数的定量关系,使用测井数据及井中岩石物理反演结果作为先验信息,将地震阻抗数据定量解释为储层物性参数、各向异性参数的空间分布.反演过程在贝叶斯框架下求得储层参数的后验概率密度函数,并从中得到参数的最优估计值及其不确定性的定量描述.在此过程中综合考虑了岩石物理模型对复杂地下介质的描述偏差和地震数据中噪声对反演不确定性的影响.在求取最大后验概率过程中使用模拟退火优化粒子群算法以提高收敛速度和计算准确性.将统计岩石物理技术应用于龙马溪组页岩气储层,得到储层泥质含量、压实指数、孔隙度、裂缝密度等物性,以及各向异性参数的空间分布及相应的不确定性估计,为页岩气储层的定量描述提供依据. 相似文献
16.
五峰-龙马溪组页岩是目前国内页岩气勘探的首选层位,而其地震岩石物理特征是利用地震方法进行"甜点"预测的重要基础之一,但对五峰-龙马溪组页岩地震弹性特征变化规律的研究并未考虑沉积、成岩过程的影响,致使相应的规律性认识缺乏地质意义.在对五峰-龙马溪组页岩样品系统声学测量基础上,分析了页岩样品地震弹性性质的变化规律.利用X射线衍射分析、扫描电镜（SEM）、阴极发光（CL）与能谱分析确定了五峰-龙马溪组页岩在不同沉积环境下的成岩过程,并讨论了成岩过程与地震弹性性质变化规律的因果关系.研究结果表明,页岩中有机质（TOC）受高热演化程度的影响,其密度通常高于1.4 g·cm-3,并接近于有机碳密度上限1.6 g·cm-3（石墨密度）.五峰-龙马溪组页岩地震弹性性质变化规律整体受沉积环境控制,沉积环境的差异形成不同的成岩过程,致使地震弹性特征也表现出不同的变化规律.表现在五峰-龙马溪页岩样品动态岩石物理特征主要受岩石结构控制（支撑颗粒弹性性质）,而孔隙度、TOC含量以及孔隙形状则为对地震弹性特征影响的次一级因素.五峰-龙马溪组页岩上段为浅水陆棚相,机械压实与化学压实（硅质胶结）为先后两个过程,造成样品表现出高的速度-孔隙度变化率、高速度比（泊松比）、高各向异性以及低TOC含量的特征.五峰-龙马溪组页岩下段为深水陆棚相,机械压实过程中同时伴有生物成因的硅质胶结,造成岩石样品表现出较高TOC含量与孔隙度、各向异性较弱以及较小的速度-孔隙度变化率.研究结果可为五峰-龙马溪页气储层的测井解释和地震"甜点"预测提供依据. 相似文献
17.
经典的微分等效介质(DEM)理论可用于确定多孔介质的弹性性质,但由于缺乏多重孔DEM方程,其估计的多重孔岩石的等效弹性模量依赖于包裹体(即不同孔隙纵横比的孔或缝)的添加顺序.本文首先从Kuster-Toksöz理论出发建立了Zimmermann和Norris两种形式的多重孔DEM方程.Norris形式的多重孔DEM方程预测的等效弹性模量总是位于Hashin-Shtrikman上下限内,而Zimmermann形式的多重孔DEM方程有时会越界.然后,通过使用干燥岩石模量比的解析近似式,对两个相互耦合的Norris形式DEM方程进行解耦得到干燥多重孔岩石的体积和剪切模量解析式.用全DEM方程的数值解对解析近似式的有效性进行了测试,解析公式的计算结果在整个孔隙度分布区间与数值解吻合良好.对实验室测量数据在假设岩石含有双重孔隙的情形下用双重孔DEM解析公式对岩石的弹性模量进行了预测,结果表明,解析式准确地预测了弹性模量随孔隙度的变化.双重孔(即软、硬孔)DEM解析模型可用来反演各孔隙类型的孔隙体积比,它可以通过实验室测量与理论预测之间的平方误差最小反演得到.砂岩样品的反演结果揭示,软孔的孔隙体积百分比与粘土含量没有明显的相关性. 相似文献
18.
基于流体替换技术的地震AVO属性气藏识别(英文) 总被引：2，自引：1，他引：1
传统上,油藏地球物理工程师是基于测井数据进行流体替换,计算油藏饱和不同流体时的弹性参数,并通过地震正演模拟分析油藏饱和不同流体时的地震响应,从而进行油气藏识别研究。该研究方案为油藏研究提供了重要的弹性参数和地震响应信息,但这些信息仅限于井眼位置。对于实际油藏条件,地下储层参数都是随位置变化而变化的,如孔隙度、泥质含量和油藏厚度等,因此基于传统流体替换方案得到的流体变化地震响应信息对于油气藏识别具有很大的局限性。研究通过设定联系油藏弹性参数与孔隙度、矿物组分等参数的岩石物理模型,并基于三层地质模型,进行地震正演模拟与AVO属性计算。得到油藏孔隙度、泥质含量和储层厚度变化时地震AVO属性,并建立了饱和水储层和含气储层对应AVO属性(包括梯度与截距)之间的定量关系。建立的AVO属性之间的线性关系可以实现基于地震AVO属性直接进行流体替换。最后,应用建立的流体替换前后AVO属性之间线性方程,对模拟地震数据直接进行流体替换,并通过流体替换前后AVO属性交汇图分析实现了气藏识别。 相似文献
19.
We measured in the laboratory ultrasonic compressional and shear‐wave velocity and attenuation (0.7–1.0 MHz) and low‐frequency (2 Hz) electrical resistivity on 63 sandstone samples with a wide range of petrophysical properties to study the influence of reservoir porosity, permeability and clay content on the joint elastic‐electrical properties of reservoir sandstones. P‐ and S‐wave velocities were found to be linearly correlated with apparent electrical formation factor on a semi‐logarithmic scale for both clean and clay‐rich sandstones; P‐ and S‐wave attenuations showed a bell‐shaped correlation (partial for S‐waves) with apparent electrical formation factor. The joint elastic‐electrical properties provide a way to discriminate between sandstones with similar porosities but with different clay contents. The laboratory results can be used to estimate sandstone reservoir permeability from seismic velocity and apparent formation factor obtained from co‐located seismic and controlled source electromagnetic surveys. 相似文献