首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 7 毫秒
1.
An inexpensive, mobile field rainfall simulator and runoff plot frame were developed for use on hillside vineyards. The simulator framework and components were lightweight, readily available and easily manageable such that they can be handled by one person during transport, set–up and operation. The vineyard rainfall simulator was simpler than many of the machines in recent use for similar studies, yet offered equal or improved performance for small‐plot studies. The system developed consistent sized 2·58 mm raindrops at intensities ranging from 20 to 90 mm/h. The average distribution uniformity coefficient at an intensity of 60 mm/h was 91·7%, with a deviation of only 2·2%. This coefficient was similar to the range reported for a more complex rotating disk simulator, and was notably greater than that obtained for other similar devices. The system water capacity of 40 l allowed for 1‐h storm durations at 60 mm/h, usually sufficient time for commencement of erosion and runoff. The runoff plot frame was designed to be quickly installed, and to discourage sediment deposition in the routing of runoff to collect containers. Copyright © 2000 John Wiley & Sons, Ltd.  相似文献   

2.
This study explored the hydrological impacts of urbanization, rainfall pattern and magnitude in a developing catchment. The Stormwater Management Model was parameterized, calibrated and validated in three development phases, which had the same catchment area (12.3 ha) but different land use intensities. The model calibration and validation by using sub‐hourly hydro‐meteorological data demonstrated a good performance of the model in predicting stormwater runoff in the different development phases. Based on the results, a threshold between minor and major rainfall events was identified and conservatively determined to be about 17.5 mm in depth. Direct runoff for minor storm events has a linear relationship with rainfall; however, events with a rainfall depth greater than the threshold yield a rainfall–runoff regression line with a clearly steeper slope. The difference in urban runoff generation between minor and major rainfall events diminishes with the increase of imperviousness. Urbanization leads to an increase in the production of stormwater runoff, but during infrequent major storms, the runoff contribution from pervious surfaces reduces the runoff changes owing to urbanization. Rainfall pattern exerts an important effect on urban runoff, which is reflected in pervious runoff. With the same magnitude, prolonged rainfall events with unvarying low intensity yield the smallest peak flow and the smallest total runoff, yet rainfall events with high peak intensity produce the largest runoff volume. These results demonstrate the different roles of impervious and pervious surfaces in runoff generation, and how runoff responds to rainstorms in urban catchments depends on hyetograph and event magnitude. Furthermore, the study provides a scientific basis of the design guideline sustainable urban drainage systems, which are still arbitrary in many countries. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

3.
David Dunkerley 《水文研究》2012,26(15):2211-2224
Small plots and a dripper rainfall simulator were used to explore the significance of the intensity fluctuations (‘event profile’) within simulated rainfall events on infiltration and runoff from bare, crusted dryland soils. Rainfall was applied at mean rain rates of 10 mm/h. Fourteen simulated rainfall events each involved more than 5000 changes of intensity and included multipeak events with a 25‐mm/h peak of intensity early in the event or late in the event and an event that included a temporary cessation of rain. These are all event profiles commonly seen in natural rain but rarely addressed in rainfall simulation. A rectangular event profile of constant intensity, as commonly used in rainfall simulation experiments, was also adopted for comparative purposes. Results demonstrate that event profile exerts an important effect on infiltration and runoff for these soils and rainfall event profiles. ‘Uniform’ events of unvarying intensity yielded the lowest total runoff, the lowest peak runoff rate and the lowest runoff ratio (0.13). These parameters increased for ‘early peak’ profiles (runoff ratio 0.24) and reached maxima for ‘late peak’ profiles (runoff ratio 0.50). Differences in runoff ratio and peak runoff rate between the ‘uniform’ event profile and those of varying intensity were all statistically significant at p ≤ 0.01. Compared with ‘uniform’ runs, the varying intensity runs yielded larger runoff ratios and peak runoff rates, exceeding those of the ‘uniform’ events by 85%–570%. These results suggest that for small‐plot studies of infiltration and erosion, the continued use of constant rainfall intensity simulations may be sacrificing important information and misrepresenting the mechanisms involved in runoff generation. The implications of these findings for the ecohydrology of the research site, an area of contour‐aligned banded vegetation in which runoff and runon are of critical importance, are highlighted. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

4.
The variability of rainfall in space and time is an essential driver of many processes in nature but little is known about its extent on the sub‐kilometre scale, despite many agricultural and environmental experiments on this scale. A network of 13 tipping‐bucket rain gauges was operated on a 1·4 km2 test site in southern Germany for four years to quantify spatial trends in rainfall depth, intensity, erosivity, and predicted runoff. The random measuring error ranged from 10% to 0·1% in case of 1 mm and 100 mm rainfall, respectively. The wind effects could be well described by the mean slope of the horizon at the stations. Except for one station, which was excluded from further analysis, the relative differences due to wind were in maximum ±5%. Gradients in rainfall depth representing the 1‐km2 scale derived by linear regressions were much larger and ranged from 1·0 to 15·7 mm km?1 with a mean of 4·2 mm km?1 (median 3·3 mm km?1). They mainly developed during short bursts of rain and thus gradients were even larger for rain intensities and caused a variation in rain erosivity of up to 255% for an individual event. The trends did not have a single primary direction and thus level out on the long term, but for short‐time periods or for single events the assumption of spatially uniform rainfall is invalid on the sub‐kilometre scale. The strength of the spatial trend increased with rain intensity. This has important implications for any hydrological or geomorphologic process sensitive to maximum rain intensities, especially when focusing on large, rare events. These sub‐kilometre scale differences are hence highly relevant for environmental processes acting on short‐time scales like flooding or erosion. They should be considered during establishing, validating and application of any event‐based runoff or erosion model. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

5.
A low-cost, simple to use portable rainfall simulator is developed for use over a 5 m^2 plot. The simulator is easy to transport and assemble in the field, thereby allowing for necessary experimental replicates to be done. It provides rainfall intensities of between 20 and 100 mm/h by changing the number and type of silicon nozzles used. The Christiansen coefficient of uniformities obtained in the field are appropriate and vary from 79 to 94% for rainfall intensities ranging from 30 to 70 mm/h. In addition, the median volumetric drop diameters measured for rainfall intensities of 30, 50, and 70 mm/h are in the lower range of that of natural rainfall and equal to 1.10 ± 0.08,1.69 ± 0.21, and 1.66 ± 0.20 mm, respectively. The velocities of the raindrops with diameters less than 1.2 mm reached terminal velocities, while raindrops less than 2.0 mm achieved velocities reasonably close to the terminal velocity of natural rainfall. Furthermore,the average time-specific kinetic energy(KET) for rainfall intensities of 30, 50, and 70 mm/h are 257.7,760.1, and 1645.2 J/m^2/h, respectively accounting for about 78.0 and 86.5% of the KET of natural rainfall for50 and 70 mm/h rainfall intensity, respectively. The applicability of the portable rainfall simulator for herbicide transport study is investigated using two herbicides(atrazine and metolachlor); herbicide losses in runoff and sediment samples are in the ranges reported in the literature. As a percentage of the amount of herbicide applied, 5.29% of atrazine and 2.15% of metolachlor are lost due to combined water and sediment runoff. The results show that the portable rainfall simulator can be effectively used in studying processes such as pesticide runoff, infiltration mechanisms, and sediment generation and transport at a field plot scale with an emphasis on how surface characteristics such as slope and soil properties affect these processes.  相似文献   

6.
The movement of water and particulate matter through a simulated coal pile using a rainfall–coal‐pile simulator is investigated. In conjunction with coal‐pile management practices, this study indicates that coal‐pile systems change their internal and surficial structure with successive rainstorm events. This change in coal‐pile structure alters the proportions, rates and suspended solid concentrations within surface runoff and infiltration during subsequent storm events. Results demonstrate the need to determine the optimal coal‐pile slope that minimizes water contact time, but at the same time minimizes the potential for mass wasting and rill erosion. Promotion of a compacted surface is beneficial for the minimization of solids removal, and a stormwater detention pond with potential flocculant additive is suggested as a viable remedial measure for the containment and treatment of coal‐pile runoff. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

7.
IINTRODUCTIONTheinterrillerosiononafieldplotisaffectedbythekineticenergyoftherainfall,wind,topographyfactors,propertiesofsoilandthecanopy.Theinterrillerosionoccursasthefirstdropimpactsthehillslopes.Theinterrillerosionoccursinallkindsofrainfallandtheamountofthesplasherosion,whichisthemainpartofinterrillerosion,canaccountforagreatpanofthetotalerosionamountinaheavystorm(Baner1990,Glymph1957,QianandWan1986,Zhou1981).Therefore,itisveryimportanttorevealthemechanismtoestimatetheamountofinterri…  相似文献   

8.
J. Mertens  D. Raes  J. Feyen 《水文研究》2002,16(3):731-739
Hydrological modelling often implies the use of rainfall data. Its quality and resolution directly affect the accuracy of the simulation results. This study illustrates that a simple approach of incorporating rainfall intensity information in daily rainfall records significantly improves the simulation of surface runoff and rainfall infiltration into soil profiles. The procedure is developed using a frequency analysis on rainfall data of the Royal Meteorological Institute of Belgium, collected with a resolution of 10 min and for a consecutive period of 61 years. The frequency analysis of the data allowed the incorporation of rainfall intensity information into daily rainfall records. To test the effect of this approach the surface runoff and water flow into three different soil types was simulated using the HYDRUS‐1D model for a typical dry, normal and wet year. The simulation results whereby the observed 10‐min rainfall data was used as input were considered as the reference. Comparative analysis revealed that the simulations using the 10 min rainfall data deducted from the incorporation of rainfall intensity into daily rainfall records, deviate a maximum 1·2% from the reference and produce much better results than the Soil Conservation Service (SCS) runoff curve‐number method because rainfall intensity is considered in the procedure presented. The SCS curve‐number method typical overestimates surface runoff during periods of low rainfall intensity (winter) and underestimate runoff during periods of high rainfall intensities (summer). Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

9.
Infiltration is the single most important parameter in deriving the net quick response rainfall which contributes to stream flood discharges. Rainfall simulation is used to study the infiltration characteristics in a typical catchment, the Six Mile Water in N. Ireland. The design of the simulator was such that it could be easily moved from one test area to another within the catchment to examine the effect of soil and slope variation. The simulator was first calibrated in controlled laboratory conditions and later the calibration was checked in the field. The simulator was mounted over an undisturbed plot of 37 m2 and the surface runoff from the area measured by means of a collecting channel located along a lower edge of the plot. Soil moisture variations were monitored using a soil moisture neutron probe. Soil classification tests and gravimetric moisture contents were carried out on each plot. The field tests were carried out with variations in rainfall intensity, initial conditions, changing seasons, and for different plots within the catchment area. The results obtained are unique in that they present data obtained under field conditions for undisturbed soil within a natural catchment. The infiltration behaviour was found to depend upon rainfall intensity, initial conditions of the plot under consideration, seasonal temperature, and a slope of the plot. The data showed that while a classical Horton type equation for infiltration was suitable for the later stages of each test result when significant surface runoff was taking place, the model failed to represent early response adequately due to storage effects being omitted in the equation. A modified form of Horton equation is proposed, which models more accurately the infiltration characteristics of the full period of each test run.  相似文献   

10.
Nozzle‐type rainfall simulators are commonly used in hydrologic and soil erosion research. Simulated rainfall intensity, originating from the nozzle, increases as the distance between the point of measurement and the source is decreased. Hence, rainfall measured using rain gauges would systematically overestimate the rainfall received at the ground level. A simple model was developed to adjust rainfall measured anywhere under the simulator to plot‐wide average rainfall at the ground level. Nozzle height, plot width, gauge diameter and height, and gauge location are required to compute this adjustment factor. Results from 15 runs at different rain intensities and durations, and with different rain gauge layouts, showed that a simple average of measured rain would overestimate the plot‐wide rain by about 20 per cent. Using the adjustment factor to convert measured rainfall for individual gauges before averaging improved the estimate of plot‐wide rainfall considerably. For the 15 runs considered, overall discrepancy between actual and measured rain is reduced to less than 1 per cent with a standard error of 0·97 mm. This model can be easily tested in the ?eld by comparing rainfall depths of different sized gauges. With the adjustment factor they should all give very similar values. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

11.
Runoff generation and soil loss from slopes have been studied for decades, but the relationships among runoff, soil loss and rill development are still not well understood. In this paper, rainfall simulation experiments were conducted in two neighbouring plots (scale: 1 m by 5 m) with four varying slopes (17.6%, 26.8%, 36.4% and 46.6%) and two rainfall intensities (90 and 120 mm h?1) using two loess soils. Data on rill development were extracted from the digital elevation models by means of photogrammetry. The effects of rainfall intensity and slope gradient on runoff, soil loss and rill development were different for the two soils. The runoff and soil loss from the Anthrosol surface were generally higher than those from the Calcaric Cambisol surface. Higher rainfall intensity produced less runoff and more sediment for almost each treatment. With increasing slope gradient, the values of cumulative runoff and soil loss peaked, except for the treatments with 90 mm h?1 rainfall on the slopes with Anthrosol. With rainfall duration, runoff discharge decreased for Anthrosol and increased for Calcaric Cambisol for almost all the treatments. For both soils, sediment concentration was very high at the onset of rainfall and decreased quickly. Almost all the sediment concentrations increased on the 17.6% and 26.8% slopes and peaked on the 36.4% and 46.6% slopes. Sediment concentrations were higher on the Anthrosol slopes than on the Calcaric Cambisol slopes. At 90 mm h?1 rainfall intensity, increasingly denser rills appeared on the Anthrosol slope as the slope gradient increased, while only steep slopes (36.4% and 46.6%) developed rills for the Calcaric Cambisol soil. The contributions of rill erosion ranged from 36% to 62% of the cumulative soil losses for Anthrosol, while the maximum contribution of rill erosion to the cumulative soil loss was only 37.9% for Calcaric Cambisol. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

12.
Rainfall erosivity represents the primary driver for particle detachment in splash soil erosion. Several raindrop erosivity indices have been developed in order to quantify the potential of rainfall to cause soil erosion. Different types of rainfall simulators have been used to relate rainfall characteristics to soil detachment. However, rainfall produced by different rainfall simulators has different characteristics, specifically different relationships between rainfall intensity and rainfall erosivity. For this reason, the effect of rainfall characteristics produced by a dripper‐type rainfall simulator on splash soil erosion (Ds) has been investigated. The simulated rainfall kinetic energy (KE) and drop size distribution (DSD) were measured using piezoelectric transducers, modified from the Vaisala RAINCAP® rain sensor. The soil splash was evaluated under various simulated rainfall intensities ranging from 10 to 100 mm h?1 using the splash‐cup method. The simulated rainfall intensity (I) and kinetic energy relationship (I–KE) was found to be different from natural rainfall. The simulated rainfall intensity and splash soil erosion relationship (I–Ds) also followed this same trend. The I–KE relationship was found to follow the natural rainfall trend until the rainfall intensity reached 30 mm h?1 and above this limit the KE started to decrease. This emphasizes the importance of the I–KE relationship in determining the I‐Ds relationship, which can differ from one rainfall simulator to another. Ds was found to be highly correlated with KE (r = 0·85, P < 0·001), when data produced by the rainfall intensity ranged from 10 to 100 mm h?1. However, when the threshold rainfall intensity (30 mm h?1) was considered, the correlation coefficient further improved (r = 0·89, P = 0·001). Accordingly, to improve the soil splash estimation of simulated rainfall under various rainfall intensities the I–KE characterization relationship for rainfall simulators has to be taken into account. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

13.
This paper describes the design, operation and performance of a field‐portable ‘drip‐type’ simulator and erosion measurement system. The system was constructed specifically for soil erosion research in the humid tropics and has been used extensively in Malaysian Borneo. The simulator is capable of producing replicable storms of up to 200 mm h?1 intensity and 20–30 minutes duration with a drop‐size distribution close to that of natural storms of such intensity (D50 of simulated rainfall is 4·15 mm at 200 mm h?1 and 3·65 mm at 160 mm h?1, D50 measured during natural rainfall = 3·25 mm). The simulator is portable and simply constructed and operates without a motor or electronics, thus making it particularly useful in remote, mountainous areas. The erosion measurement system allows assessment of: (1) rainsplash detachment and net downslope transport from the erosion plot; (2) slopewash (erosion transported by overland flow); and (3) infiltration capacity and overland flow. The performance of the simulator–erosion system compared with previous systems is assessed with reference to experiments carried out in primary and regenerating tropical rainforest at Danum Valley (Malaysian Borneo). The system was found to compare favourably with previous field simulators, producing a total storm kinetic energy of 727 J m?2 (over a 20‐minute storm event) and a kinetic energy rate of 0·61 J m?2 s?1, approximately half that experienced on the ground during a natural rainfall event of similar intensity, despite the shorter distance to the ground. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

14.
The decay of roughness is an important factor governing surface processes such as infiltration and soil erosion. Thus the decay of surface roughness under different surface conditions was investigated and related to quantitative amounts of soil loss, runoff and sediment concentration in a laboratory experiment. Rainfall with an intensity of 128 mm/h was applied to a bare or mulched surfaces of a sandy loam soil with known surface roughness at specified time intervals. The decay of roughness as expressed by roughness ratio, in this experiment, was better predicted when related to an exponential function of the square root of cumulative kinetic energy of rainfall rather than with the cumulative rainfall. The roughness decay equations in literature did not predict breakdown under mulched surfaces accurately. Thus the exponent parameters of the roughness decay equations were adjusted to reflect the reduced decay occurring under mulched surfaces. In a bare soil, regression equations expressing the dependent variables as a function of initial roughness index were significant, but with low coefficients of determination, being 0·39 for soil loss, 0·12 for runoff and 0·36 for sediment concentration. In addition to initial roughness index, cumulative kinetic energy of rainfall was further included in the regressions. This led to an increase in coefficients of determination, which was 0·81 for soil loss, 0·74 for runoff and 0·49 for sediment concentration. The coefficients of determination (0·87 for soil loss, 0·85 for runoff and 0·51 for sediment concentration) were further increased when the final roughness index was included in addition to initial roughness index and cumulative kinetic energy in the regressions. This work shows that soil loss and runoff could be predicted from bare soil surface provided the initial roughness and the energy of rainfall is known. However, field verifications of these relationships are needed under different tillage tools and under natural rainfall. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

15.
This paper investigates the effect of introducing spatially varying rainfall fields to a hydrological model simulating runoff and erosion. Pairs of model simulations were run using either spatially uniform (i.e. spatially averaged) or spatially varying rainfall fields on a 500‐m grid. The hydrological model used was a simplified version of Thales which enabled runoff generation processes to be isolated from hillslope averaging processes. Both saturation excess and infiltration excess generation mechanisms were considered, as simplifications of actual hillslope processes. A 5‐year average recurrence interval synthetic rainfall event typical of temperate climates (Melbourne, Australia) was used. The erosion model was based on the WEPP interrill equation, modified to allow nonlinear terms relating the erosion rate to rainfall or runoff‐squared. The model results were extracted at different scales to investigate whether the effects of spatially varying rainfall were scale dependent. A series of statistical metrics were developed to assess the variability due to introducing the spatially varying rainfall field. At the catchment (approximately 150 km2) scale, it was found that particularly for saturation excess runoff, model predictions of runoff were insensitive to the spatial resolution of the rainfall data. Generally, erosion processes at smaller sub‐catchment scales, particularly when the sediment generation equation had non linearity, were more sensitive to spatial rainfall variability. Introducing runon infiltration reduced the total runoff and sediment yield at all scales, and this process was also most sensitive to the rainfall resolution. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

16.
Jun Zhang  Dawei Han 《水文研究》2017,31(16):2972-2981
This study explores rainfall spatial variability and its influence on runoff modelling. A novel assessment scheme integrated with coefficient of variance and Moran's I is introduced to describe effective rainfall spatial variability. Coefficient of variance is widely accepted to identify rainfall variability through rainfall intensity, whereas Moran's I reflects rainfall spatial autocorrelation. This new assessment framework combines these two indicators to assess the spatial variability derived from both rainfall intensity and distribution, which are crucial in determining the time and magnitude of runoff generation. Four model structures embedded in the Variable Infiltration Capacity model are adopted for hydrological modelling in the Brue catchment of England. The models are assigned with 1, 3, 8, and 27 hydrological response units, respectively, and diverse rainfall spatial information for 236 events are extracted from 1995. This study investigates the model performance of different partitioning based on rainfall spatial variability through peak volume (Qp) and time to peak (Tp), along with the rainfall event process. The results show that models associated with dense spatial partitioning are broadly capable of capturing more spatial information with better performance. It is unnecessary to utilize models with high spatial density for simple rainfall events, though they show distinct advantages on complex events. With additional spatial information, Qp experiences a notable improvement over Tp. Moreover, seasonal patterns signified by the assessment scheme imply the feasibility of seasonal models.  相似文献   

17.
The first step towards developing a reliable seasonal runoff forecast is identifying the key predictors that drive rainfall and runoff. This paper investigates the lag relationships between rainfall across Australia and runoff across southeast Australia versus 12 atmospheric‐oceanic predictors, and how the relationships change over time. The analysis of rainfall data indicates that the relationship is greatest in spring and summer in northeast Australia and in spring in southeast Australia. The best predictors for spring rainfall in eastern Australia are NINO4 [sea surface temperature (SST) in western Pacific] and thermocline (20 °C isotherm of the Pacific) and those for summer rainfall in northeast Australia are NINO4 and Southern Oscillation Index (SOI) (pressure difference between Tahiti and Darwin). The relationship in northern Australia is greatest in spring and autumn with NINO4 being the best predictor. In western Australia, the relationship is significant in summer, where SST2 (SST over the Indian Ocean) and II (SST over the Indonesian region) is the best predictor in the southwest and northwest, respectively. The analysis of runoff across southeast Australia indicates that the runoff predictability in the southern parts is greatest in winter and spring, with antecedent runoff being the best predictor. The relationship between spring runoff and NINO4, thermocline and SOI is also relatively high and can be used together with antecedent runoff to forecast spring runoff. In the northern parts of southeast Australia, the atmospheric‐oceanic variables are better predictors of runoff than antecedent runoff, and have significant correlation with winter, spring and summer runoff. For longer lead times, the runoff serial correlation is reduced, especially over the northern parts, and the atmospheric‐oceanic variables are likely to be better predictors for forecasting runoff. The correlations between runoff versus the predictors vary with time, and this has implications for the development of forecast relationship that assumes stationarity in the historical data. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

18.
Extreme rainfall events (>50 mm day?1) falling on cultivated land which is relatively bare of vegetation cover, typically give rise to networks of rills and gullies with ephemeral gullies in depressions and valley bottoms. Farming practices such as the removal of field boundaries, the presence of wheelings and rolled surfaces encourage runoff. The coincidence of vulnerable crops such as maize, potatoes and sugar beet with erodible soils and sloping sites may lead to high rates of erosion associated with single events or wet seasons. Not all extreme rainfall events lead to runoff and erosion, this depends on timing with respect to the growing crop. Rates of erosion associated with extreme events may be high but when placed in a long‐term temporal context, they tend to be quite low. Extreme events frequently lead to off‐site impacts most notably muddy flooding of properties and the pollution of watercourses. Landscapes may be protected from extreme events by standard soil conservation techniques; off‐site impacts may similarly be alleviated by flood‐protection measures. In both cases, the challenge is to put in place adequate economic incentives, social pressures and governmental policy frameworks to incentivise effective action. Predicted rainfall changes in the future include wetter winters and increases in rain per rain‐day. In this case, the risk of erosion on cultivated land will increase. However, erosion mitigation strategies should still address the issue of the incidence of high‐risk crops on vulnerable sites. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

19.
Abstract

Rainfall simulators have often been used to mimic natural rainfall for studies of various land-surface and water interaction processes. The characteristics of the simulated rainfall are the main indicators used to judge the performance of the rainfall simulators. The aim of this study is to investigate the potential of piezoelectric transducers for measuring and evaluating a dripper-type simulated rainfall drop-size distribution (DSD) and kinetic energy (KE). The directly measured KE was significantly correlated with the estimated KE using the drop-size distribution and empirical rain drop fall velocity relationships. This result emphasizes the potential use of the piezoelectric sensor to directly measure and evaluate rainfall kinetic energy. Also, the relationship between rainfall intensity and KE showed good patterns of agreement between simulated rainfall and natural rainfall.

Citation Abd Elbasit, M. A. M., Yasuda, H. & Salmi, A. (2011) Application of piezoelectric transducers in simulated rainfall erosivity assessment. Hydrol. Sci. J. 56(1), 187–194.  相似文献   

20.
Soil erosion is a severe problem hindering sustainable agriculture on the Loess Plateau of China. Plot experiments were conducted under the natural rainfall condition during 1995–1997 at Wangdongguo and Aobao catchments in this region to evaluate the effects of various land use, cropping systems, land slopes and rainfall on runoff and sediment losses, as well as the differences in catchment responses. The experiments included various surface conditions ranging from bare soil to vegetated surfaces (maize, wheat residue, Robinia pseudoacacia L., Amorpha fruticosa L., Stipa capillata L., buckwheat and Astragarus adsurgens L.). The measurements were carried out on hill slopes with different gradients (i.e. 0 ° to 36 °). These plots varied from 20 to 60 m in length. Results indicated that runoff and erosion in this region occurred mainly during summer storms. Summer runoff and sediment losses under cropping and other vegetation were significantly less than those from ploughed bare soil (i.e. without crop/plant or crop residue). There were fewer runoff and sediment losses with increasing canopy cover. Land slope had a major effect on runoff and sediment losses and this effect was markedly larger in the tillage plots than that in the natural grass and forest plots, although this effect was very small when the maximum rainfall intensity was larger than 58·8 mm/h or smaller than 2·4 mm/h. Sediment losses per unit area rose with increasing slope length for the same land slope and same land use. The effect of slope length on sediment losses was stronger on a bare soil plot than on a crop/plant plot. The runoff volume and sediment losses were both closely related to rainfall volume and maximum intensity, while runoff coefficient was mainly controlled by maximum rainfall intensity. Hortonian overland flow is the dominant runoff process in the region. The differences in runoff volume, runoff coefficient and sediment losses between the catchments are mainly controlled by the maximum rainfall intensity and infiltration characteristics. The Aobao catchment yielded much larger runoff volume, runoff coefficient and sediment than the Wangdongguo catchment. Copyright © 2001 John Wiley & Sons, Ltd.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号