首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
The bed of estuaries is often characterized by ripples and dunes of varying size. Whereas smaller bedforms adapt their morphological shape to the oscillating tidal currents, large compound dunes (here: asymmetric tidal dunes) remain stable for periods longer than a tidal cycle. Bedforms constitute a form roughness, that is, hydraulic flow resistance, which has a large-scale effect on tidal asymmetry and, hence, on hydrodynamics, sediment transport, and morphodynamics of estuaries and coastal seas. Flow separation behind the dune crest and recirculation on the steep downstream side result in turbulence and energy loss. Since the energy dissipation can be related to the dune lee slope angle, asymmetric dune shapes induce variable flow resistance during ebb and flood phases. Here, a noncalibrated numerical model has been applied to analyze the large-scale effect of symmetric and asymmetric dune shapes on estuarine tidal asymmetry evaluated by residual bed load sediment transport at the Weser estuary, Germany. Scenario simulations were performed with parameterized bed roughness of symmetric and asymmetric dune shapes and without dune roughness. The spatiotemporal interaction of distinct dune shapes with the main drivers of estuarine sediment and morphodynamics, that is, river discharge and tidal energy, is shown to be complex but substantial. The contrasting effects of flood- and ebb-oriented asymmetric dunes on residual bed load transport rates and directions are estimated to be of a similar importance as the controls of seasonal changes of discharge on these net sediment fluxes at the Lower Weser estuary. This corroborates the need to consider dune-induced directional bed roughness in numerical models of estuarine and tidal environments.  相似文献   

2.
This paper examines the morphological development of the Yangtze River mouth, which has been diverting southeasterly (dextrally), according to historical (150 years) chart‐based digital evolution model and on‐site measured tidal flow data. We reveal a significantly narrowing of the northern river mouth branch from formerly >30 km wide to presently 10 km wide due to rapid siltation. Net siltation there, however, decreases gradually, which largely contrasts with the fact that the siltation has shifted to the southern river mouth area, as shown by many newly‐emerged estuarine islands, sandy shoals and bifurcated branches. Our data have further demonstrated that the ebb flow that dominates in the study area changes its direction gradually from east to southeast from the inner to outer river mouth area, and its duration is much longer than the flood flow in the inner river mouth area, but nearly equal at the river mouth area. Accordingly, the sediment transport pathway has been diverted from east to southeast. We examine whether the Coriolis Force could explain the dextral diversion of the ebb flow and the altered morphodynamical processes. Although too weak to strengthen the tidal flows, the Coriolis Force can drag the ebb flow southeasterly, and so influence sediment transport paths at the estuarine scale. The Coriolis Force is limited in the inner river mouth, but substantial at and in the outer river mouth area when gradually free of estuarine topographic constraints. The Coriolis Force causes an offset in propagation of in‐out flow directions at the river mouth area to form a slack water setting prone to estuarine siltation. Using the present approach also enables explanation of the morphological development of the Holocene Yangtze delta‐coast that extends to the southeast. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

3.
Knowledge of the physical processes acting at inlet systems and their interaction with sediments and sediment bodies is important to the understanding of such environments. The objectives of this study are to identify and assess the relative importance of the controlling processes across the complex sandbar system at the Teign inlet (Teignmouth, UK) through the combined application of a numerical model, field data and Argus video images. This allows the determination of the regions dominated by wave processes or by tidal processes and definition of the variability of these regions under different wave, tide and river-discharge conditions. Modelling experiments carried out for one stage of the evolution of the system show that the interaction between tidal motion and waves generates complex circulation patterns that drive the local sediment transport and sandbar dynamics, producing a cyclic morphological behaviour of the sandbars that form the ebb-tidal delta. The relative importance of each physical process on the sediment transport and consequent morphodynamics varies across the region. The main inlet channel is dominated by tidal action that directs the sediment transport as a consequence of the varying tidal flow asymmetry, resulting in net offshore transport. Sediment transport over the shoals and secondary channels at both sides of the main channel is dominated by wave-related processes, displacing sediment in the onshore direction. The interaction between waves and tide-generated currents controls the transport over the submerged sandbar that defines the channels seaward extend. High river discharge events are also proven to be important in this region, as they can change sediment-transport patterns across the area.Responsible Editor: Iris Grabemann  相似文献   

4.
The morphologic changes in estuaries and coastal lagoons are very complex and constitute a challenging task in coastal research. The bathymetric changes result from the combined action of tides, waves, rivers discharge and wind stress in the area of interest. Additionally, an accurate knowledge of the sediment transport is essential to achieve a good morphological characterization. This work establishes the influence of the wave climate on the morphodynamics of the Ria de Aveiro lagoon inlet by analysing the numerical results of the morphodynamic modelling system MORSYS2D. The numerical simulations considered a realistic coupled forcing of tidal currents and waves. The computed sediment fluxes and bathymetric changes are analysed and compared with the erosion and accretion trends obtained from the numerical simulations forced only by tidal currents, in order to establish the wave climate influence. The final bathymetry and the corresponding changes are compared with bathymetric data collected through surveys. It is concluded that: (a) the morphodynamics of the study area is dominated by the wave regime in the lagoon inlet and nearshore areas, while in the inner areas is tidally dominated; and (b) the inclusion of the wave regime forcing constitutes an improvement in order to accurately reproduce the local morphodynamics.  相似文献   

5.
The Hangzhou Bay is a macro-tidal bay located to the south of the Changjiang estuary in China. Along its northern shore, a large-scale tidal channel system has developed, which includes a main northern tidal channel, with a length of more than 50 km and a width up to 10 km, and a secondary southern tidal channel. A process-based morphodynamic model, incorporating the cohesive sediment transport module of Delft3D, is used to analyze the physical processes and mechanisms underlying the formation and evolution of this tidal channel system. The results show that spatial gradients of flood dominance, caused by boundary enhancement via current convergences, is responsible for the formation of the channel system, due to a combination of the various factors such as funnel-shaped geometry hindering associated with the presence of islands, and flow deviation by the southern tidal flat and so on. The model results agree well with the real morphological features. This study also indicates that the reclamation of the southern tidal flat imposes a profound influence on the morphological evolution of the tidal channel system in the Hangzhou Bay. It is feasible to use the model to simulate long-term estuarine morphological changes with cohesive sediment settings.  相似文献   

6.
《国际泥沙研究》2022,37(6):857-870
A macrotidal estuary with mountain streams (MEMS) is characterized by rapidly rising and falling flood peaks and large tidal ranges and is a typical estuary type with strong flow dynamics that is found worldwide. Understanding the morphodynamic evolution of MEMSs has great significance for river management. The roles of the mountain stream river flood process and macrotides on the morphology evolution still needs further quantitative study. Taking the Oujiang Estuary as an example, the evolution mechanisms of bifurcated reaches of a MEMS are studied by analyzing the hydrologic and topographic data and using a two-dimensional numerical model for flow-sediment transport. The results show that (1) under the combined actions of runoff and macrotides, sediment transport is active and morphological evolution is intensive, the main branch and subbranch historically switch frequently, and erosion generally occurs in wet years, while deposition occurs in dry years. (2) The river flood process of mountain streams causes rapid erosion, which rises and falls rapidly with a kurtosis index (K) of approximately 2.9. There is a logarithmic relation between the sediment transport load and K. The volume of sediment transport will be 40% larger than the river flood process with K = 1.2 as for the Yangtze River. (3) Macrotides with large tidal ranges could enhance the discharge asymmetry (ψ). When the ψ is greater than 1, the side branches are dominated by flood tides. Although the current study is site specific, the results are expected to provide a valuable reference for sustainable management in similar estuaries.  相似文献   

7.
Contemporary hydrodynamics and morphological change are examined in a shallow microtidal estuary, located on a wave-dominated coast (Port Stephens, NSW, Australia). Process-based numerical modelling is undertaken by combining modules for hydrodynamics, waves, sediment transport and bathymetry updates. Model results suggest that the complex estuarine bathymetry and geometry give rise to spatial variations in the tidal currents and a marked asymmetry between ebb and flood flows. Sediment transport paths correspond with tidal asymmetry patterns. The SE storms significantly enhance the quantities of sediment transport, while locally generated waves by the westerly strong winds also are capable of causing sediment entrainment and contribute to the delta morphological change. The wave/wind-induced currents are not uniform with flow over shoals driven in the same direction as waves/winds while a reverse flow occurring in the adjacent channel. The conceptual sediment transport model developed in this study shows flood-directed transport occurs on the flood ramp while ebb-directed net transport occurs in the tidal channels and at the estuary entrance. Accretion of the intertidal sand shoals and deepening of tidal channels, as revealed by the model, suggest that sediment-infilling becomes advanced, which may lead to an ebb-dominated estuary. It is likely that a switch from flood- to ebb-dominance occurs during the estuary evolution, and the present-day estuary acts as a sediment source rather than sediment sink to the coastal system. This is conflictive to the expectation drawn from the estuarine morphology; however, it is consistent with previous research suggesting that, in an infilling estuary, an increase in build-up of intertidal flats/shoals can eventually shift an estuary towards ebb dominance. Thus, field data are needed to validate the result presented here, and further study is required to investigate a variety of estuaries in the Australian area.  相似文献   

8.
The presence of vegetation modifies flow and sediment transport in alluvial channels and hence the morphological evolution of river systems. Plants increase the local roughness, modify flow patterns and provide additional drag, decreasing the bed‐shear stress and enhancing local sediment deposition. For this, it is important to take into account the presence of vegetation in morphodynamic modelling. Models describing the effects of vegetation on water flow and sediment transport already exist, but comparative analyses and validations on extensive datasets are still lacking. In order to provide practical information for modelling purposes, we analysed the performance of a large number of models on flow resistance, vegetation drag, vertical velocity profiles and bed‐shear stresses in vegetated channels. Their assessments and applicability ranges are derived by comparing their predictions with measured values from a large dataset for different types of submerged and emergent vegetation gathered from the literature. The work includes assessing the performance of the sediment transport capacity formulae of Engelund and Hansen and van Rijn in the case of vegetated beds, as well as the value of the drag coefficient to be used for different types of vegetation and hydraulic conditions. The results provide a unique comparative overview of existing models for the assessment of the effects of vegetation on morphodynamics, highlighting their performances and applicability ranges. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

9.
A 2D depth-averaged model for hydrodynamic,sediment transport and river morphological adjustment is presented.The sediment transport submodel considers non-uniform sediment,bed surface armoring,impact of secondary flow on the direction of bed-load transport,and transverse slope of river bed.The bank erosion submodel incorporates a simple simulation method for updating bank geometry during either degradational or aggradational bed evolution.The model is applied to a 180°bend with a constant radius under unsteady flow conditions,and to Friedkin’s laboratory meander channels.The results are in acceptable agreement with measurements,confirming the two dimensional model’s potential in predicting the formation of river meandering and improving understanding of patterning processes.Future researches are needed to clarify some simplifications and limitations of the model.  相似文献   

10.
A 2D depth-averaged numerical model is set up to simulate the macro-scale hydrodynamic characteristics, sediment transport patterns and morphological evolution in Hangzhou Bay, a large macro-tidal estuary on the eastern coast of China. By incorporating the shallow water equations, the suspended sediment transport equation and the mass-balance equation for sediment; short-term hydrodynamics, sediment transport and long-term morphological evolution for Hangzhou Bay are simulated and the underlying physical mechanisms are analyzed. The model reproduces the spatial distribution patterns of suspended sediment concentration (SSC) in Hangzhou Bay, characterized by three high SSC zones and two low SSC zones. It also correctly simulates the residual flow, the residual sediment transport and the sediment accumulation patterns in Hangzhou Bay. The model results are in agreement with previous studies based on field measurements. The residual flow and the residual sediment transport are landwards directed in the northern part of the bay and seawards directed in the southern part. Sediment accumulation takes place in most areas of the bay. Harmonic analysis revealed that the tide is flood-dominant in the northern part of the bay and ebb-dominant in the southern part of the bay. The strength of the flood-dominance increases landwards along the northern Hangzhou Bay. In turn sediment transport in Hangzhou Bay is controlled by this tidal asymmetry pattern. In addition, the direction of tidal propagation in the East China Sea, the presence of the archipelago in the southeast and the funnel-shaped geometry of the bay, play important roles for the patterns of sediment transport and sediment accumulation respectively.  相似文献   

11.
The response of the Yalu River Estuary to human activities was investigated.Changes of sediment dynamics during the past 10 years were explored through hydrodynamic calculation,as well as heavy mineral...  相似文献   

12.
The evolution of the shore-normal profile shape of accreting tidal flats is controlled mainly by tidally induced mud and sand transport. To understand the evolution processes, a model is developed to simulate the tidal flat profile changes in response to spring-neap tidal cycles. The model treats both sand and mud transport patterns over the tidal flats and adopts an algorithm to deal with the areas near the high water (HW) level on springs. The model is applied to an accreting tidal flat on the central Jiangsu coast, to investigate the relationship between the equilibrium profile shape of the tidal flat and the various influencing factors (e.g. initial profile shape of tidal flat, tidal range and sediment supply). Based on the modeling results the following conclusions are derived: (1) the accreting tidal flat tends to be convex in profile shape when it reaches an equilibrium state; (2) sediment supply is a key factor affecting the width and accretion-erosion status of the tidal flat; (3) filling the area close to high water (HW) on spring tides is essential for reproducing the shape evolution and the morphodynamic behavior of tidal flats; (4) after an equilibrium shape is formed, a tidal flat with abundant sediment supply can steadily prograde to seaward, at the same time maintaining the equilibrium shape; and (5) the modeled width and the slope of the tidal flat are consistent with those of the central Jiangsu coast when the parameters adopted in the model are appropriate for the local conditions.  相似文献   

13.
Numerical modelling of morphodynamics—Vilaine Estuary   总被引：1，自引：0，他引：1  
The main objective of this paper is to develop a method to simulate long-term morphodynamics of estuaries dominated by fine sediments, which are subject to both tidal flow and meteorologically induced variations in freshwater run-off and wave conditions. The method is tested on the Vilaine Estuary located in South Brittany, France. The estuary is subject to a meso–macrotidal regime. The semi-diurnal tidal range varies from around 2.5 to 5 m at neap and spring, respectively. The freshwater input is controlled by a dam located approximately 8 km from the mouth of the estuary. Sediments are characterised as mostly fines, but more sandy areas are also found. The morphology of the estuary is highly influenced by the dam. It is very dynamic and changes in a complicated manner with the run-off from the dam, the tide and the wave forcing at the mouth of the estuary. Extensive hydrodynamic and sediment field data have been collected in the past and provide a solid scientific basis for studying the estuary. Based on a conceptual understanding of the morphodynamics, a numerical morphological model with coupled hydrodynamic, surface wave and sediment transport models is formulated. The numerical models are calibrated to reproduce sediment concentrations, tidal flat altimetry and overall sediment fluxes. Scaling factors are applied to a reference year to form quasi-realistic hydrodynamic forcing and river run-off, which allow for the simulations to be extended to other years. The simulation results are compared with observed bathymetric changes in the estuary during the period 1998–2005. The models and scaling factors are applied to predict the morphological development over a time scale of up to 10 years. The influence of the initial conditions and the sequence of external hydrodynamic forcing, with respect to the morphodynamic response of the estuary, are discussed.  相似文献   

14.
This paper illustrates how the acoustic Doppler current profiler （ADCP） and single-beam echo-sounder （SBES） recordings can be used for the calibration of existing software to assist in generalizing the morphodynamic processes in large rivers at key sites such as bifi.trcations and confluences. Calibration of the MIKE21C numerical model by the Danish Hydraulic Institute at the 25-km-long reach of Lower Paran~ near Rosario （Argentina） is presented. This reach includes two downstream confluences and two bifurcations. The model simulates a 2-D depth-averaged flow velocity and the related sediment fluxes to predict the bifurcation morphodynamics that affects the Paranh waterway. To investigate the river channel bathymetry, roughness, flow discharge allocation at bifurcations, suspended sediment concentration and grain size distributions, several instruments were used. These instruments included two ADCPs by Teledyne RDI working at frequencies of 600 and 1,200 kHz, a Sontek ADCP working at a frequency of 1,000 kHz and a SBES. The method to assess suspended sediment concentration and grain size distributions has been previously described. This paper focuses primarily on investigating dune morphology （by means of SBES depth measurements） and friction velocity （by means of ADCP profiling） to determine the river channel bed-roughness. The 2-D model results agree with observed values of bed-roughness, flow velocity and suspended sediment concentration distributions at the investigated sections, known data of water slope and total load of bed sediment are in good agreement with model results.  相似文献   

15.
The paper describes the derivation of a depth-averaged, two-dimensional form of the sediment balance equation, suitable to study the morphodynamics of movable sediment beds even when the flow depth attains values comparable to bed irregularities. This equation is derived by double-averaging in time and in space the instantaneous three-dimensional sediment balance equation. For this, a proper phase function is introduced, which depends on the statistics of bed topography. The structure of the macroscopic volumetric sediment discharge vector resulting from the averaging procedure is discussed for the case of dominant bedload transport. The theoretical framework developed within the paper sets the stage for a proper parametrization of the physical processes acting at spatial scales smaller than those usually resolved by depthaveraged numerical models.  相似文献   

16.
Bifurcations in tidally influenced deltas distribute river discharge over downstream channels, asserting a strong control over terrestrial runoff to the coastal ocean. Whereas the mechanics of river bifurcations is well-understood, junctions in tidal channels have received comparatively little attention in the literature. This paper aims to quantify the tidal impact on subtidal discharge distribution at the bifurcations in the Mahakam Delta, East Kalimantan, Indonesia. The Mahakam Delta is a regular fan-shaped delta, composed of a quasi-symmetric network of rectilinear distributaries and sinuous tidal channels. A depth-averaged version of the unstructured-mesh, finite-element model second-generation Louvain-la-Neuve Ice-ocean Model has been used to simulate the hydrodynamics driven by river discharge and tides in the delta channel network. The model was forced with tides at open sea boundaries and with measured and modeled river discharge at upstream locations. Calibration was performed with water level time series and flow measurements, both spanning a simulation period. Validation was performed by comparing the model results with discharge measurements at the two principal bifurcations in the delta. Results indicate that within 10 to 15 km from the delta apex, the tides alter the river discharge division by about 10% in all bifurcations. The tidal impact increases seaward, with a maximum value of the order of 30%. In general, the effect of tides is to hamper the discharge division that would occur in the case without tides.  相似文献   

17.
This study aims at gaining basic understanding about two specific phenomena that are observed in the highly turbid estuaries tidal Ouse, Yangtze and Ems, i.e. (1) the accumulation of suspended matter in the deeper parts of the estuaries and (2) the relatively high values of turbidity near the surface in the area of the turbidity maximum. A semi-analytical model is analysed to verify the hypothesis that these phenomena result from bottom slope-induced turbidity currents and from hindered settling, respectively. The model governs the dynamics of residual flow, driven by fresh water discharge, salinity gradients and turbidity gradients. It further uses the condition of morphodynamic equilibrium (no divergence of net sediment transport) to compute the residual sediment concentration. New aspects are that depth variations on flow and mixing processes, as well as flocculation and hindered settling of sediment, are explicitly accounted for. Tides act as a source of mixing and erosion of sediment only, thus processes like tidal pumping are not considered. Model results show that the estuarine turbidity maximum (ETM) shifts in the down-slope direction, compared to the case of a constant depth. Slope-induced turbidity currents, which are directed down-slope near the bottom and up-slope near the surface, are responsible for this shift, thereby confirming the first part of the hypothesis above. The down-slope shift of the ETM is reduced by currents resulting from gradients in depth-dependent mixing, which counteract turbidity currents, but which are always weaker. Including flocculation and hindered settling yields increased surface sediment concentrations in the area of the turbidity maximum, compared to the situation of a constant settling velocity, thereby supporting the second part of the hypothesis. Sensitivity experiments reveal that the conclusions are not sensitive to the values of the model parameters.  相似文献   

18.
A simple and efficient method to improve morphological predictions using depth-averaged tidal models is presented. The method includes the contribution of secondary flows in sediment transport using the computed flow field from a depth-averaged model. The method has been validated for a case study using the 3D POLCOMS model and ADCP data. The enhanced depth-averaged tidal model along with the SWAN wave model are applied to morphological prediction around the Lleyn Peninsula and Bardsey Island as a case study in the Irish Sea. Due to the presence of a headland in this area two asymmetrical tidal eddies are developed in which the cyclonic eddy is stronger as a result of Coriolis effects. The results show that the enhanced model can effectively predict formation of sand banks at the centre of cyclonic eddies, while the depth-averaged model, due to its inability to accommodate secondary flow, is inadequate in this respect.  相似文献   

19.
In tidal estuaries, quantifying freshwater discharge is still a difficult problem that has not yet been overcome due to the inherent difficulty in measuring and analysing the tidal discharge, especially during periods of low river flow. Because observations are often made in the stations further upstream, where the ratio of river to tidal discharge is large, it remains difficult to determine the discharge rate in the saline region. Freshwater discharge estimation is even more difficult in a branched estuary system having multiple diversion channels that connect with each other at a junction. To date, several methods have been developed for estimating freshwater discharge in estuaries. The most widely used are analytical and conceptual models that employ salinity as the principal trace and numerical simulations. However, these methods are very time consuming and costly as they require large sets of observations before the computations can take place. This paper presents a simple approach to investigating the discharge distribution over branched channels by considering the energy loss due to friction. We develop an analytical model that can obtain the discharge rate quantitatively at a junction where the main flow bifurcates into two branches. The model uses the bed roughness, tidal water level, and cross‐sectional profile under tidally averaged conditions as input data. Two selected estuarine systems in the Hiroshima delta in Japan and the Mekong delta in Vietnam have been investigated. Computations of the newly developed model show good agreement with earlier published results computed by sophisticated analytical and numerical models.  相似文献   

20.
Alluvial channels arise through the interaction between morphology, hydraulics, and sediment transport, known as the ‘fluvial trinity’. Over relatively short timescales where climate and geology are fixed but discharge and sediment supply may vary, this process facilitates adjustments towards steady state, where the system oscillates around a mean condition. The relationship between changes in conditions and geomorphic response may be highly complex and nonlinear, especially in systems with multiple modes of adjustment. This study examines the adjustment of an erodible channel with fixed banks and a widely graded sediment mixture to successive increases in discharge. With each increase in discharge, components of the fluvial trinity adjusted towards a steady state. Particularly at relatively low discharges, adjustments were controlled by intrinsic thresholds and highlighted important morphodynamic processes. Notably, there was a strong interplay between channel morphology and sediment transport, and an effect whereby larger-than-average grains controlled channel deformation. These two processes occurred at the bar scale and were highly spatialised, which has two important implications: (1) reach-averaged representations of process provide only partial insight into morphodynamics; and (2) models of rivers that suppress these process feedbacks and size-dependent transport may not replicate morphodynamics that typically occur in field conditions. The experiments provide quantitative evidence for conceptual models describing exponential approaches towards steady state and the potential for transiency if disturbance frequency exceeds the recovery time. They also highlight how in natural rivers, particularly those with greater degrees of freedom for adjustment (notably, lateral adjustment and meandering), continuous changes in discharge may lead to nonlinear rather than steady-state behaviour. In these settings, more holistic analytical frameworks that embrace different aspects of the system are critical in understanding the direction, magnitude and timing of channel adjustments.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号