共查询到19条相似文献，搜索用时 468 毫秒
1.
《地球物理学进展》2017,(4)
弹性波逆时偏移是当前多分量地震资料相对准确的偏移算法,它能够形成多波模式的成像剖面,从而减少纵波勘探的多解性.本文首先依据各向同性介质中矢量分离纵横波场的速度-应力方程组,利用高阶交错网格有限差分数值方法求解弹性波方程,进而构建矢量的纵波和横波波场,不同于散度和旋度算子分离纵横波场的传统方法,文中提出的矢量分离纵横波场方法保持了原始波场的振幅和相位特征.文中也提出将震源归一化的内积成像条件应用于分离后的纯纵波和横波矢量场,由此得到的转换波成像避免了传统弹性波成像方法中出现的极性反转.水平层状和复杂构造模型测试表明,文中提出的基于矢量分离纵横波场的弹性波逆时偏移方法成像精度高,转换波成像PS和SP极性无反转,所形成的多种模式纯波剖面能够准确地对复杂地下构造成像. 相似文献
2.
本文针对弹性波逆时偏移,提出稳定的激发振幅成像条件.在震源波场的正向传播过程中,计算每个网格点的能量,并保存最大能量密度的时刻和相应的波场值;在检波器波场的逆时传播过程中,在每个网格点提取最大能量密度时刻的检波器波场值,并利用保存的最大能量震源波场做归一化,获得角度依赖的反射系数成像剖面.相比于归一化互相关成像条件,该成像条件在震源波场的正向传播过程中无需存储波场快照,节省大量磁盘空间和I/O吞吐任务,提高了计算效率;相比于弹性波的激发时间成像条件,该成像条件自动校正了水平分量在震源两侧的极性反转,在多炮叠加时避免振幅损失.数值试验表明,与归一化成像条件相比,稳定激发振幅成像条件具有更小的计算量,偏移剖面的低频假象更弱,水平分量的成像能力更优,具有更高的空间分辨率. 相似文献
3.
《应用地球物理》2017,(4)
将偏移后的炮域偏移距道集转换为角度域共成像道集(ADCIGs)可为偏移速度分析(MVA)和叠前反演提供输入道集,并且ADCIGs是理论上没有假象的叠前反演道集,也是目前公认的精度最高的叠前反演道集。本文研究了基于矢量波场逆时偏移的弹性波保幅ADCIGs的提取方法,以保幅弹性波逆时偏移方程为基础,其核心是求取不同震源位置的纵、横波场在地下各成像点的入射角,对于转换波勘探,二者共享一个入射角,即震源纵波入射角。根据几何关系,震源纵波波场的传播角、构造的局部地层倾角之差为震源纵波入射角,震源纵波波场的传播角利用解耦后纵波场的极化向量得到,构造的局部地层倾角利用偏移叠加剖面的复波数得到。对纵、横波的共炮点偏移道集按入射角重新排列即可得到各自的ADCIGs。文中利用水平层状介质模型、倾斜层状介质模型、Marmousi-Ⅱ弹性波部分模型和实测资料验证了算法的有效性,计算结果表明,本文方法计算的纵、横波角度具有较高的精度,提取的角道集具有较好的振幅保真性,能够为MVA和叠前反演提供可靠的输入道集。 相似文献
4.
高斯束逆时偏移结合了射线类偏移的高计算效率和波动方程逆时偏移的高精度,能很好地处理焦散点、大倾角成像问题,并且具有面向目标成像的能力.多分量地震资料的偏移技术可以对地下复杂构造进行更准确的成像,由于实际地下介质具有黏滞性,研究黏弹性叠前逆时偏移具有一定的现实意义.本文采用高斯束逆时偏移方法对多分量地震数据进行吸收衰减补偿,首先分别给出纵波和转换波共炮域高斯束叠前逆时偏移方法原理,在此基础上推导补偿吸收衰减的表达式,校正Q引起的振幅衰减和相位畸变,实现基于吸收衰减补偿的多分量高斯束叠前逆时偏移.数值模型的测试结果显示,在考虑地下介质的黏滞性时,本文方法具有更高的成像分辨率. 相似文献
5.
《应用地球物理》2016,(3)
欲实现基于弹性波方程的矢量波场逆时偏移纵、横波独立成像,必须在波场延拓过程中实现纵、横波场的分离,散度和旋度算子分离的纵、横波出现振幅与相位的畸变,导致输出成像结果的振幅失真。本文提出一种在弹性波场延拓过程中实现纵、横波保幅分离的方法,在传统的弹性波方程中加入纵波压力、纵波振动速度和横波振动速度方程,实现纵横波的矢量分解,再对分解后的矢量纵波和矢量横波做标量化合成得到保幅分离的纵、横波场,对保幅分离的纵、横波场应用成像条件,然后实现矢量波场逆时偏移的保幅纵横波成像。该方法可以保证分离后纵、横波的振幅与相位不变;同时,分解后的纵波压力和纵波振动速度可用于层间反射噪音压制和横波极性校正,提高多分量地震资料联合逆时偏移的纵、横波成像质量,从而实现保幅弹性波逆时偏移的目的,为叠前深度剖面应用于叠前反演工作奠定基础。 相似文献
6.
《地球物理学进展》2020,(3)
弹性波逆时偏移是一种以矢量波理论为基础的深度域偏移算法,该算法在波场传播过程中能够正确处理波形能量的转换,保持地震波的动力学和运动学特征.然而,传统弹性波逆时偏移由于成像时纵横波未分离,导致串扰噪声的产生,降低成像精度.为压制弹性波逆时偏移成像串扰噪声,本文对基于Helmholtz分解的波场分离与基于解耦方程的波场分离方法进行研究和分析,并测试对比相应的弹性波逆时偏移成像效果.均匀各向同性介质波场分离测试表明,基于Helmholtz分解分离波场的振幅与相位均发生改变,需要额外校正;而基于解耦方程的波场分离方法可以保持原始波场相位与振幅特征不变.Marmousi截断模型测试表明,基于Helmholtz分解分离波场的弹性波逆时偏移成像振幅与相位发生改变,且存在极性反转现象;基于解耦方程波场分离方法的弹性波逆时偏移成像保持原始波场矢量特征,无极性反转现象,成像效果较为理想. 相似文献
7.
8.
随着多分量采集技术的发展,弹性波逆时偏移技术在三维各向异性介质复杂地质构造成像中得到了广泛的应用.然而耦合的P波场和S波场,会在传播过程中产生串扰噪声,降低弹性波逆时偏移的成像精度.为了解决这一问题,本研究针对具有倾斜各向异性对称轴的三维横向各向同性(Transverse Isotropy, TI)介质,提出了一种矢量弹性波场快速解耦方法,可以有效提高偏移剖面的成像质量.该方法首先通过坐标转换,将观测系统坐标系的垂直轴旋转到TI介质的对称轴方向,在新坐标系下,根据具有垂直对称轴的三维横向各向同性(Vertical Transverse Isotropy, VTI)介质中的分解算子,推导出三维TI介质解耦算子表达式.接着引入一种在空间域快速计算分解波场的方法,来实现空间域矢量P波场和S波场分离,极大地提高了计算效率.最后,通过点积成像条件,将提出的P/S波分解方法引入到三维TI介质弹性波逆时偏移中,得到高精度的PP和PS成像.与以往的波场分解方法相比,本文方法具有数值稳定和计算效率高的特点.数值算例表明,应用上述三维TI分解算子得到的偏移剖面有效压制了噪声,提高了成像质量. 相似文献
9.
在各向异性地震波场中,qP波与qS波常常是耦合在一起的.多分量地震数据处理中一个关键环节就是波型分离(即模式解耦),以纵波成分为主的常规单分量地震数据的成像则需要合理描述标量qP波的传播算子.本文作者曾构建了在运动学上同弹性波动方程等价,动力学上突出标量qP波的伪纯模式波动方程.为了彻底消除qS波残余,本文根据波矢量与qP波偏振矢量之间的偏差,提出从伪纯模式波场提取纯模式标量qP波的方法.数值分析展示了投影偏差算子在波数域和空间域的特征.基于不同复杂程度理论模型的试验结果表明,联合"伪纯模式传播算子"与"投影偏差校正"可为各向异性介质分离模式波场传播过程提供一种简便的描述工具. 相似文献
10.
随着我国勘探开发难度逐步增大,勘探目标开始向裂缝油气藏、岩性油气藏等复杂探区转移,研究高精度、适应性强的多波多分量深度偏移算法在后续的地震解释、属性分析及储层预测中具有重要意义.针对多波多分量地震数据,本文提出了一种二维弹性波时空域高斯束偏移方法.时空域高斯束沿中心射线传播时能够面向成像目标描述局部波场,且对振幅和频率可调制的Gabor基函数有天然的适应性,因而将基于Gabor分解的子波重构方法应用于震源波场构建,从而得到任意点源函数产生的时空域高斯束波场.该方法由于直接在时间域进行计算,可以避开频率域中出现的假频和边缘截断效应等问题.基于各向同性弹性波动方程的Kirchhoff-Helmholtz积分解,利用矢量时空域高斯束传播算子构建格林函数和格林位移张量,并结合上行射线追踪策略,实现了检波点波场的反向延拓.针对矢量波成像问题,本文借鉴弹性波逆时偏移方法从矢量延拓波场中分离出纯纵波分量和纯横波分量,进而采用修改后的内积成像条件产生具有明确物理意义的PP、PS成像结果,避免了转换波成像的极性反转问题.最后利用简单两层模型和不含盐体构造的部分Sigsbee2a模型的成像结果,并将其与应用近似纵横波成像条件、标量和矢量势成像条件的偏移剖面进行对比,验证了本文方法的正确性和有效性. 相似文献
11.
The elastic reverse time migration approach based on the vector-wavefield decomposition generally uses the scalar product imaging condition to image the multicomponent seismic data. However, the resulting images contain the crosstalk artefacts and the polarity reversal problems, which are caused by the nonphysical wave modes and the angle-dependent reduction of image amplitudes, respectively. To overcome these two problems, we develop an amplitude-preserving elastic reverse time migration approach based on the vector-decomposed P- and S-wave seismic records. This approach includes two key points. The first is that we employ the vector-decomposed P- and S-wave multicomponent records to independently reconstruct the PP and PS reflection images to mitigate the crosstalk artefacts. The second is that we propose two schemes in addressing the issue of polarity reversal problem in the conventional PP image. One solution is to adopt the angle-dependent equation. Another one is to reconstruct an amplitude-preserving PP image with a separated scalar P-wave particle velocity, which has a clear physical meaning. Numerical examples using two-dimensional and three-dimensional models demonstrate that the proposed elastic reverse time migration approach can provide the images with better amplitude-preserving performance and fewer crosstalk artefacts, compared with the conventional elastic reverse time migration approach based on the scalar product imaging condition. 相似文献
12.
The conventional reverse time migration of ground-penetrating radar data is implemented with the two-way wave equation. The cross-correlation result contains low-frequency noise and false images caused by improper wave paths. To eliminate low-frequency noise and improve the quality of the migration image, we propose to separate the left-up-going, left-down-going, right-up-going and right-down-going wavefield components in the forward- and backward-propagated wavefields based on the Hilbert transform. By applying the reverse time migration of ground-penetrating radar data with full wavefield decomposition based on the Hilbert transform, we obtain the reverse time migration images of different wavefield components and combine correct imaging conditions to generate complete migration images. The proposed method is tested on the synthetic ground-penetrating radar data of a tilt-interface model and a complex model. The migration results show that the imaging condition of different wavefield components can highlight the desired structures. We further discuss the reasons for incomplete images by reverse time migration with partial wavefields. Compared with the conventional reverse time migration methods for ground-penetrating radar data, low-frequency noise can be eliminated in images generated by the reverse time migration method with full wavefield decomposition based on the Hilbert transform. 相似文献
13.
受地下复杂构造和地震数据采集系统的影响，使地震波对地下目标的照明出现不均匀性，地震采集系统难以有效地获取地下某些目标的反射信息，进而使数据偏移成像在这些目标体上出现成像阴影. 根据波场和Green函数的窗口Fourier框架展开，利用角度域波动方程偏移成像和波动方程照明分析，并结合波动方程反演理论，提出一种角度域波动方程偏移成像阴影照明补偿方法. 这种补偿方法能同时考虑地震数据采集系统和波场传播路径对偏移成像的影响，消除复杂构造区的偏移成像阴影，改进波动方程叠前深度偏移成像在复杂构造区的成像效果. 相似文献
14.
在常规偏移方法中一般都需要压制地震数据中的多次波,仅利用一次波信息成像,把自由表面反射的多次波视为噪声,但是在多次波中也包含着地下结构信息,应该将其充分利用到成像中来.事实上,已经有不少成像方法试图利用多次波信息,但是大部分方法都需要对多次波进行预测.本文提出了基于傅里叶有限差分偏移算子的数据自相关偏移方法.在这种偏移方法中,对含有一次波和多次波的地震数据,分别进行下行和上行延拓,然后直接利用常规的互相关成像条件成像.由于波场延拓采用了傅里叶有限差分算子,其计算效率高,能够很好地对复杂介质中的地震数据进行延拓.在数值试验中,使用了一个含散射点的三层模型和Marmousi模型.合成数据测试结果表明,这种方法可以对更大范围的地下构造成像,比常规的只利用一次波的傅里叶有限差分法照明度更好,并且在浅层可以提供更高的分辨率.我们提出的数据自相关策略易于实现且避免了繁杂的多次波预测,这对于复杂地下构造成像可能有着重大意义. 相似文献
15.
反射地震勘探中的偏移成像技术是获取地下介质构造形态最有效的手段之一.在叠前深度域偏移方法中,目前工业界采用的方法包括基于射线理论的波动方程积分解法和基于波动理论的微分波动方程单程波解法,这两类方法难以处理地震波横向速度变化剧烈的高陡倾角构造成像问题.近年来勘探地震学研究领域发展起来的叠前逆时偏移采用了双程波求解微分波动方程的算法,这种方法具有相位准确、不受介质横向速度变化和高陡倾角构造的影响、成像精度高、可以利用回转波正确成像等优点,从理论上弥补了当前工业界常规地震偏移所面临的成像缺陷.然而,叠前逆时偏移成像方法从理论走向实用尚需解决如下问题:计算速度和数据存储空间的节省、初始速度模型的建立、震源子波的选择、数值模型边界条件的定义和假像的消除等等.对于计算速度和存储量大的问题,随着计算机硬件的快速发展,将会不断得到改善,同时可以采取一些计算技术和存储策略来加以缓解.本文主要针对初始速度模型的建立、震源子波的选择、数值模型边界条件的定义和假像的消除这些因素,利用简单模型进行了分析.对于反射波造成的传播路径上的假像,给出了一种振幅补偿滤波方法.对勘探地球物理学界给出的SEG/EAGE二维盐丘模型、Marmousi模型和本研究设计的崎岖海底模型进行了叠前逆时偏移成像,均取得了较好的成像效果. 相似文献
16.
Directional‐oriented wavefield imaging: a new wave‐based subsurface illumination imaging condition for reverse time migration 
下载免费PDF全文
下载免费PDF全文 The key objective of an imaging algorithm is to produce accurate and high‐resolution images of the subsurface geology. However, significant wavefield distortions occur due to wave propagation through complex structures and irregular acquisition geometries causing uneven wavefield illumination at the target. Therefore, conventional imaging conditions are unable to correctly compensate for variable illumination effects. We propose a generalised wave‐based imaging condition, which incorporates a weighting function based on energy illumination at each subsurface reflection and azimuth angles. Our proposed imaging kernel, named as the directional‐oriented wavefield imaging, compensates for illumination effects produced by possible surface obstructions during acquisition, sparse geometries employed in the field, and complex velocity models. An integral part of the directional‐oriented wavefield imaging condition is a methodology for applying down‐going/up‐going wavefield decomposition to both source and receiver extrapolated wavefields. This type of wavefield decomposition eliminates low‐frequency artefacts and scattering noise caused by the two‐way wave equation and can facilitate the robust estimation for energy fluxes of wavefields required for the seismic illumination analysis. Then, based on the estimation of the respective wavefield propagation vectors and associated directions, we evaluate the illumination energy for each subsurface location as a function of image depth point and subsurface azimuth and reflection angles. Thus, the final directional‐oriented wavefield imaging kernel is a cross‐correlation of the decomposed source and receiver wavefields weighted by the illuminated energy estimated at each depth location. The application of the directional‐oriented wavefield imaging condition can be employed during the generation of both depth‐stacked images and azimuth–reflection angle‐domain common image gathers. Numerical examples using synthetic and real data demonstrate that the new imaging condition can properly image complex wave paths and produce high‐fidelity depth sections. 相似文献
17.
Elastic least-squares reverse time migration has been applied to multi-component seismic data to obtain high-quality images. However, the final images may suffer from artefacts caused by P- and S-wave crosstalk and severe spurious diffractions caused by complex topographic surface conditions. To suppress these crosstalk artefacts and spurious diffractions, we have developed a topographic separated-wavefield elastic least-squares reverse time migration algorithm. In this method, we apply P- and S-wave separated elastic velocity–stress wave equations in the curvilinear coordinates to derive demigration equations and gradient formulas with respect to P- and S-velocity. For the implementation of topographic separated-wavefield elastic least-squares reverse time migration, the wavefields, gradient directions and step lengths are all calculated in the curvilinear coordinates. Numerical experiments conducted with the two-component data synthetized by a three-topographic-layer with anomalies model and the Canadian Foothills model are considered to verify our method. The results reveal that compared with the conventional method, our method promises imaging results with higher resolution and has a faster residual convergence speed. Finally, we carry out numerical examples on noisy data, imperfect migration velocity and inaccurate surface elevation to analyse its sensitivity to noise, migration velocity and surface elevation error. The results prove that our method is less sensitive to noise compared with the conventional elastic least-squares reverse time migration and needs good migration velocities as other least-squares reverse time migration methods. In addition, when implementing the proposed method, an accurate surface elevation should be obtained by global positioning system to yield high-quality images. 相似文献
18.
叠前深度偏移理论及方法一直是地震数据成像中研究的热点问题.业界对单程波叠前深度偏移方法和逆时深度偏移开展了深入的研究,但对双程波方程波场深度延拓理论及成像方法的研究还鲜有报道.本文以地表记录的波场值为基础,利用单程波传播算子估计波场对深度的偏导数,为在深度域求解双程波方程提供充分的边界条件,并提出利用矩阵分解理论实现双程波方程的波场深度外推.通过对强速度变化介质中传播波场的计算,与传统的单程波偏移方法相比,本文提出的偏移方法计算的波场与常规有限差分技术计算的波场相一致,证明了本方法计算的准确性.通过对SEAM模型的成像,在相同的成像参数下,与传统的单程波偏移算法和逆时深度偏移算法方法相比,本文提出的偏移方法能够提供更少的虚假成像和更清晰的成像结果.本文所提偏移算法具有深度偏移和双程波偏移的双重特色,推动和发展了双程波叠前深度偏移的理论和实践. 相似文献
19.
It is important to include the viscous effect in seismic numerical modelling and seismic migration due to the ubiquitous viscosity in an actual subsurface medium. Prestack reverse‐time migration (RTM) is currently one of the most accurate methods for seismic imaging. One of the key steps of RTM is wavefield forward and backward extrapolation and how to solve the wave equation fast and accurately is the essence of this process. In this paper, we apply the time‐space domain dispersion‐relation‐based finite‐difference (FD) method for visco‐acoustic wave numerical modelling. Dispersion analysis and numerical modelling results demonstrate that the time‐space domain FD method has great accuracy and can effectively suppress numerical dispersion. Also, we use the time‐space domain FD method to solve the visco‐acoustic wave equation in wavefield extrapolation of RTM and apply the source‐normalized cross‐correlation imaging condition in migration. Improved imaging has been obtained in both synthetic and real data tests. The migration result of the visco‐acoustic wave RTM is clearer and more accurate than that of acoustic wave RTM. In addition, in the process of wavefield forward and backward extrapolation, we adopt adaptive variable‐length spatial operators to compute spatial derivatives to significantly decrease computing costs without reducing the accuracy of the numerical solution. 相似文献