首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
A feasibility study was carried out to evaluate the application of perennial/annual plant species in a phytoextraction process of a previously washed industrial urban soil contaminated by nickel, arsenic and cupper. The plant species selected for this study were Ipomea (Ipomea variada); grass (Poa pratensis); grass mixture (Festuca rubra, Cynodon dactylon, Lolium multiforum, Pennisetum sp.); Monks Cress (Tropaeolum majus); ficus (Ficus benajamina) and fern (Pteris cretica). Soil was characterized and it presented the following heavy metals concentrations (dry weight): 80 mg of Ni/kg, 456–656 mg of As/kg and 1684–3166 mg of Cu/kg. Germination and survival in contaminated soil tests were conducted, from these, P. pratensis was discarded and the rest of plant species tested were used for the phytoextraction selection test. After 4 months of growth, biomass production was determined, and content of Ni, As and Cu was analyzed in plant’s tissue. Metal biological absorption coefficient (BAC), bio-concentration factor (BCF) and translocation factor (TF), were calculated.Regarding to biomass generation it was observed, in every case, an inhibition of the plant growth compared with blanks sown in a non contaminated soil; inhibition ranged from 22.5% for the Monk cress to 98% for Ipomea. Even though the later presented high BAC, BCF and TF, its growth was severely inhibited, and therefore, due its low biomass generation, it is not recommended for phytoextraction under conditions for this study.Heavy metals concentrations in plant’s tissue (dry weight) were as high as 866 mg Cu/kg and 602 mg As/kg for grass mixture; and 825 mg As/kg was observed for Monks cress.Grass mixture and monks cress had high BAC, BCF and TF, also they had high metal concentrations in its plants tissues and the lowest growth inhibition rates; hence the application in phytoextraction processes of these plants is advisable.  相似文献   

2.
Ten native plants species that grow in three tailings dams from Ag, Pb, Cu and Zn mine in Queretaro, Mexico were studied. Total concentrations in tailings were 183–14,660 mg/kg As, 45–308 mg/kg Cd, 327–1754 mg/kg Pb, 149–459 mg/kg Cu and 448–505 mg/kg Zn. In the three tailings dams, the solubility of these elements is low. Tailings in dam 1 are acid generating while tailings in dams 2 and 3 are not acid-generating potential. Plants species that accumulate arsenic and heavy metals was identified; Nicotina glauca generally presented the highest concentrations (92 mg/kg As, 106 mg/kg Cd, 189 mg/kg Pb, 95 mg/kg Cu and 1985 mg/kg Zn). Other species that accumulate these elements are Flaveria pubescens, Tecoma stans, Prosopis Sp, Casuarina Sp and Maurandia antirrhiniflora. Two species were found that accumulates a large amount of metals in the root, Cenchrus ciliaris and Opuntia lasiacantha. Concentrations in soils in which plants grow were 488–5990 mg/kg As, 5–129 mg/kg Cd, 169–3638 mg/kg Pb, 159–1254 mg/kg Cu and 1431–13,488 mg/kg Zn. The Accumulation Factor (AF) determined for plants was less than 1, with exception of N. glauca for Cd. The correlation between arsenic and heavy metals found in soils and plants was low. Knowledge of plant characteristics allows it use in planning the reforestation of tailings dams in controlled manner. This will reduce the risk of potentially toxic elements are integrated into the food chain of animal species.  相似文献   

3.
Surface soil moisture is a critical parameter for understanding the energy flux at the land atmosphere boundary. Weather modeling, climate prediction, and remote sensing validation are some of the applications for surface soil moisture information. The most common in situ measurement for these purposes are sensors that are installed at depths of approximately 5 cm. There are however, sensor technologies and network designs that do not provide an estimate at this depth. If soil moisture estimates at deeper depths could be extrapolated to the near surface, in situ networks providing estimates at other depths would see their values enhanced. Soil moisture sensors from the U.S. Climate Reference Network (USCRN) were used to generate models of 5 cm soil moisture, with 10 cm soil moisture measurements and antecedent precipitation as inputs, via machine learning techniques. Validation was conducted with the available, in situ, 5 cm resources. It was shown that a 5 cm estimate, which was extrapolated from a 10 cm sensor and antecedent local precipitation, produced a root-mean-squared-error (RMSE) of 0.0215 m3/m3. Next, these machine-learning-generated 5 cm estimates were also compared to AMSR-E estimates at these locations. These results were then compared with the performance of the actual in situ readings against the AMSR-E data. The machine learning estimates at 5 cm produced an RMSE of approximately 0.03 m3/m3 when an optimized gain and offset were applied. This is necessary considering the performance of AMSR-E in locations characterized by high vegetation water contents, which are present across North Carolina. Lastly, the application of this extrapolation technique is applied to the ECONet in North Carolina, which provides a 10 cm depth measurement as its shallowest soil moisture estimate. A raw RMSE of 0.028 m3/m3 was achieved, and with a linear gain and offset applied at each ECONet site, an RMSE of 0.013 m3/m3 was possible.  相似文献   

4.
Surfactant enhanced soil washing (SESW) was applied to an industrial contaminated soil. A preliminary characterization of the soil regarding the alkaline-earth metals, Na, K, Ca and Mg took values of 2866, 2036, 2783 and 4149 mg/kg. The heavy metals As, Cd, Cu, Pb, Ni and Zn, had values of 4019, 14, 35582, 70, 2603, and 261 mg/kg, respectively. When using different surfactants, high removal of Cu, Ni and Zn were found, and medium removals for Pb, As and Cd. In the case of these three metals, tap water removed more than the surfactant solutions, except for the case of As.There were surfactants with average removals (this is, the removal for all the metals studied) of 67.1% (Tween 80), 64.9% (Surfacpol 14104) and 61.2% (Emulgin W600). There were exceptional removals using Texapon N-40 (83.2%, 82.8% and 86.6% for Cu, Ni and Zn), Tween 80 (85.9, 85.4 and 81.5 for Cd, Zn and Cu), Polafix CAPB (79%, 83.2% and 49.7% for Ni, Zn and As). The worst results were obtained with POLAFIX LO with a global removal of 45%, well below of the average removal with tap water (50.2%).All removal efficiencies are reported for a one step washing using 0.5% surfactant solutions, except for the case of mezquite gum, where a 0.1% solution was employed.  相似文献   

5.
We present the new 14C extraction line at ETH Zürich. This system is designed to extract in situ-produced cosmogenic 14C from terrestrial quartz samples, and to obtain pure CO2 gas for analysis with a gas ion source Accelerator Mass Spectrometry (AMS) system. Samples are degassed at 1550–1600 °C without the use of a fluxing agent. Gas purification is achieved by a series of cryogenic traps and passage through hot Ag and Cu wool/mesh. Graphitization and, thus, sample dilution is not required. Tests to determine the CO2 recovery after gas extraction and cleaning yielded consistently good recovery rates of >99.8% (n = 7). The 14C blank contribution from the all-metal tubing system is negligible. Our preliminary procedural blank estimate – deriving mostly from the hot extraction furnace – is <5 × 105 14C atoms. Extraction tests on two quartz samples by stepped-heating show a quantitative separation of atmospheric 14C at ≤500 °C from the in situ component above 1200 °C. Based on these data, we estimate to achieve a complete 14C extraction from a quartz sample.  相似文献   

6.
《Marine pollution bulletin》2014,83(1-2):155-166
Recently compiled databases facilitated estimation of basin-wide benthic organic biomass and turnover in the Strait of Georgia, an inland sea off western Canada. Basin-wide organic biomass was estimated at 43.1 × 106 kg C and production was 54.6 × 106 kg C yr−1, resulting in organic biomass turnover (P/B) of 1.27 × yr−1. Organic biomass and production for sub-regions were predictable from modified organic flux (r2 > 0.9). P/B declined significantly with increasing modified organic flux, suggesting greater biomass storage in high flux sediments. Biomass and production were highest, and P/B lowest near the Fraser River. Annual basin-wide benthic production was 60% of previously estimated oxidized organic flux to substrates, which agrees with proportional measurements from a recent, localized study.Deviations from expected patterns related to organic enrichment and other stressors are discussed, as are potential impacts to benthic biomass and production, of declining bottom oxygen, increasing bottom temperature and potential changes in riverine input.  相似文献   

7.
The biosorption capacity of different cortex fruit wastes including banana (Musa paradisiaca), lemon (Citrus limonum) and orange (Citrus sinensis) peel were evaluated. In order to perform these experiments, grinded dried cortexes were used as package in 100 mm high, 10 mm i.d. columns. The grinded material was powdered in a mortar and passed through a screen in order to get two different particle sizes, 2 and 1 mm, for all powders. To estimate the biosorption capabilities of the tested materials, different heavy metals were passed through the columns and the elution filtrate reloaded different times to increase the retention of metals. The heavy metals used were prepared as synthetic samples at 10 mg/L of Pb(NO3)2, Cd(NO3)2, and Cu(NO3)2·6H2O using primary standards. In preliminary experiments using banana cortex, it was found that material with 1 mm of particle size showed higher retention capability (up to12%) than the material with 2 mm of particle size. Considering these results, 1 mm particle size material was used in further experiments with the other waste materials. It was found that for Pb and Cu removal, lemon and orange cortex showed better biosorption capability when compared with banana cortex (up to 15% less for Pb and 48% less for Cu). For Cd, banana cortex showed better biosorption capability 57% (67.2 mg/g of cortex) more than orange (28.8 mg/g of cortex), and 82% more than lemon (12 mg/g of cortex). Reload of the columns with the filtrate after passing through the column improved the removal capability of all the materials tested from 10% to 50% depending on the cortex and metal tested.  相似文献   

8.
In Ottawa, Canada, unusually high amplification ratios have recently been measured in clayey silts (called ‘Leda Clays’) at low levels of earthquake-induced ground shaking. However, the contribution of seismic Q, or material damping (ξ=1/2Q), to the overall ground motion at soft soil sites across the city is not well understood. This research investigates attenuation measurements in soft soils (Vs<250 m/s) for ongoing seismic hazard evaluation in the Ottawa area. The work focuses on in situ measurements of damping in two deep boreholes drilled into Leda Clay. To investigate the possibility of frequency-dependent dynamic properties of these materials at low strains, a new approach to the spectral ratio technique has been developed for the measurement of Qs in the field using a mono-frequency vibratory source (generating signals between 10 and 100 Hz), and two identical downhole 3-component geophones. Monofrequency signals also allowed for the measurement of dispersion (variation of velocity with frequency). Analysis of the data show that dynamic properties are, for the most part, independent of frequency in the homogenous silty soils, yielding negligible variation in shear wave velocity (<2 m/s) across the frequency test band, and small strain Qs's ranging from 170 to 200 (damping of 0.25–0.30%) over soil thickness intervals ranging from 10 to 60 m. At intervals within 20 m of the ground surface, laminated silt and clay beds of elevated porosity are found to have slight influence on the frequency dependence of damping for frequencies greater than 70 Hz (damping increase to 0.6%).  相似文献   

9.
Phragmites australis invasion is altering plant communities and therefore, soil properties have been changed significantly. This study compared the diversity among three communities in a wetland to assess the impact of invasion by Phragmites and the associated impact on soil properties. Three diversity indices, species richness (S), evenness (E) and Shanon-Weiner index (H) had significantly higher values in uninvaded plots compared to invaded in all the communities. Invaded plots had the lowest diversity, with H = 0 and Simpson’s index (D) = 1, (i.e. they were monospecific). These results support the idea that a reduction in diversity can be expected in wetlands colonized by Phragmites. Phragmites invasion significantly increased soil moisture, EC, phenolics, organic carbon, dehydrogenase activity and microbial biomass (C, N, P) with reduction of pH and arbuscular mycorrhizae fungi spore density compared with uninvaded zones. In addition, the study of antifungal phytochemistry of Phragmites elucidated the decrease of the competitive abilities of native plant Melaleuca ericifolia by interfering with formation of mycorrhizal associations and biomass. Our results suggest that Phragmites invasion has caused significant ecological alterations in communities by demonstrating a combined effect to plant diversity and soil variables.  相似文献   

10.
Rainwater harvesting through modified contour ridges known as dead level contours has been practiced in Zimbabwe in the last two decades. Studies have shown marginal soil moisture retention benefits for using this technique while results on crop yield benefits are lacking. This paper presents results from a field study for assessing the impact of dead level contours on soil moisture and crop yield carried out from 2009 to 2011 within the Limpopo River Basin. The experiments were carried out on two study sites; one containing silt loam soil and another containing sandy soil. Three treatments constituting dead level contoured plots, non-contoured plots and plots with the traditional graded contours were used on each site. All the three treatments were planted with a maize crop and managed using conventional farming methods. Planting, weeding and fertiliser application in the three treatments were done at the same time. Crop monitoring was carried out on sub plots measuring 4 m by 4 m established in every treatment. The development of the crop was monitored until harvesting time with data on plant height, leaf moisture and crop yield being collected. An analysis of the data shows that in the site with silt loam soil more soil moisture accumulated after heavy rainfall in dead level contour plots compared to the control (no contours) and graded contour plots (P < 0.05). However the maize crop experienced an insignificantly (P > 0.05) higher yield in the dead level contoured treatment compared to the non-contoured treatment while a significantly (P < 0.05) higher yield was obtained in the dead level contoured treatment when compared with a graded contoured treatment. Different results were obtained from the site with sandy soil where there was no significant difference in soil moisture after a high rainfall event of 60 mm/day between dead level contour plots compared to the control and graded contour plots. The yield from the dead level contoured treatment and that from the graded contoured treatment were comparable and both not significantly (P > 0.05) higher than that from the non-contoured treatment. This suggests that adopting dead level contours as an in situ rainwater harvesting technique results in crop yield benefits in fields with soil type conditions that enable runoff generation but is not likely to have benefit in soils with low runoff generation.  相似文献   

11.
《Marine pollution bulletin》2009,58(6-12):632-636
The intertidal copeopod Tigriopus japonicus, which is abundant and widely distributed along the coasts of Western Pacific, has been suggested to be a good marine ecotoxicity testing organism. In this study, a series of experiments were conducted to investigate the reproducibility and variability of copper (Cu) sensitivity of T. japonicus so as to evaluate its potential to serve as an appropriate test species. To understand the seasonal variation of Cu sensitivity, individuals of T. japonicus were collected from the field in summer and winter, and subjected to standard 96 h acute (static renewal) toxicity tests. 96 h-LC50 values of T. japonicus collected from the two seasons were marginally different (p = 0.05), with an overall coefficient of variation (CV) of 33%. Most importantly, our results indicated that chronic Cu sensitivity of T. japonicus was highly reproducible. The CVs of intrinsic rates of increase in the population of the control and Cu treatment (10 μg Cu l−1) groups were only 10–11% between 10 runs of a standardised complete life-cycle test. Moreover, different Cu(II) salts generally resulted in a similar 96 h-LC50 value while Cu(I) chloride was consistently slightly less toxic than Cu(II) salts. Given such a high reproducibility of toxic responses, it is advocated to use T. japonicus as a routine testing organism.  相似文献   

12.
We present a 10Be production-rate calibration derived from an early Holocene debris-flow deposit at about 1000 m above sea level in the central Southern Alps, New Zealand, in the mid-latitude Southern Hemisphere. Ten radiocarbon ages on macrofossils from a soil horizon buried by the deposit date the deposit to 9690 ± 50 calendar years before AD2008. Surface 10Be concentrations of seven large boulders partially embedded in the stable surface of the deposit are tightly distributed, yielding a standard deviation of ～2%. Conversion of the 10Be measurements to sea level/high-latitude values using each of five standard scaling methods indicates 10Be production rates of 3.84 ± 0.08, 3.87 ± 0.08, 3.83 ± 0.08, 4.15 ± 0.09, and 3.74 ± 0.08 atoms g?1 a?1, relative to the ‘07KNSTD’ 10Be AMS standard, and including only the local time-integrated production-rate uncertainties. When including a sea level high-latitude scaling uncertainty the overall error is ～2.5% (1σ) for each rate. To test the regional applicability of this production-rate calibration, we measured 10Be concentrations in a set of nearby moraines deposited before 18 060 ± 200 years before AD2008. The 10Be ages are only consistent with minimum-limiting 14C age data when calculated using the new production rates. This also suggests that terrestrial in situ cosmogenic-nuclide production did not change significantly from Last Glacial Maximum to Holocene time in New Zealand. Our production rates agree well with those of a recent calibration study from northeastern North America, but are 12–14% lower than other commonly adopted values. The production-rate values presented here can be used elsewhere in New Zealand for rock surfaces exposed during or since the last glacial period.  相似文献   

13.
《Continental Shelf Research》1999,19(9):1113-1141
Relationships among primary production, chlorophyll, nutrients, irradiance and mixing processes were examined along the salinity gradient in the Mississippi River outflow region. A series of six cruises were conducted during 1988–1992 at various times of year and stages of river discharge. Maximum values of biomass and primary production were typically observed at intermediate salinities and coincided with non-conservative decreases in nutrients along the salinity gradient. Highest values of productivity (>10 gC m−2 d−1) and biomass (>30 mg chlorophyll a m−3) were observed in April 1988, July–August 1990 and April–May 1992; values were lower in March and September 1991. Rates of primary production were apparently constrained by low irradiance and mixing in the more turbid, low salinity regions of the plume, and by nutrient limitation outside the plume. Highest values of primary production occurred at stations where surface nutrient concentrations exhibited large deviations from conservative mixing relationships, indicating that depletion of nutrients was related to phytoplankton uptake. Mixing and advection were important in determining the location and magnitude of primary production maxima and nutrient depletion. In addition to growth within plume surface waters, enhanced growth and/or retention of biomass may have occurred in longer residence time waters at the plume edge and/or beneath the surface plume. Vertical structure of some plume stations revealed the presence of subsurface biomass maxima in intermediate salinity water that was depleted in nutrients presumably by uptake processes. Exchange between subsurface water and the surface plume apparently contributed to the reduction in nutrients at intermediate salinities in the surface layer. DIN (=nitrate+nitrite+ammonium) : PO4 (=phosphate) ratios in river water varied seasonally, with high values in winter and spring and low values in late summer and fall. Periods of high DIN : PO4 ratios in river nutrients coincided with cruises when surface nutrient concentrations and their ratios indicated a high probability for P limitation. N limitation was more likely to occur at high salinities and during late summer and fall. Evidence for Si limitation was also found, particularly in spring.  相似文献   

14.
In this study, remediation results of trace metals in natural water and treated water using three functionalized nanofiber mats of cellulose and chitosan are reported. The nanofiber materials, packed in mini-columns, were employed for the remediation of five toxic trace metals (Cd, Pb, Cu, Cr and Ni) from natural water samples. Trace metals in real water samples were undetectable as the concentrations were lower than the instrument’s detection limits of 0.27 × 10−3 (Cd) and 4.2 × 10−2 (Pb) μg mL−1, respectively. However, after percolation through the functionalised biosorbents in cartridges, detectability of the metal ions was enhanced. The starting volume of the natural water sample was 100 mL, which was passed through a column containing the nanofibers sorbent and the retained metals eluted with 5 mL of 2.0 M nitric acid. The eluate was analyzed for metals concentrations. An enrichment factor of 20 for the metals was realized as a result of the pre-concentration procedure applied to handle the determination of the metals at trace levels. The order of remediation of the studied metals using the nanofibers was as follows: chitosan/PAM-g-furan-2,5-dione < cellulose-g-furan-2,5-dione < cellulose-g-oxolane-2,5-dione. The modified biopolymer nanofibers were able to adsorb trace metals from the river water and treated water, thereby confirming their capability of water purification. These materials are proposed as useful tools and innovative approach for improving the quality of drinking for those consumers in small scale households.  相似文献   

15.
《Marine pollution bulletin》2012,64(5-12):523-527
Concentrations of trace metals (Zn, Cr, Cu, V, Cd and Pb), total organic carbon (TOC), black carbon (BC) and their granulometry were examined in 25 surface sediment samples from the northern Bering Sea, Chukchi Sea and adjacent areas. Trace metal concentrations in the sediments varied from 21.06–168.21 mg kg−1 for Zn, 8.91–46.94 mg kg−1 for Cr, 2.69–49.39 mg kg−1 for Cu, 32.46–185.54 mg kg−1 for V, 0.09–0.92 mg kg−1 for Cd, and 0.95–15.25 mg kg−1 for Pb. The geoaccumulation index (Igeo) indicated that trace metal contamination (Zn and Cd) existed in some stations of the study area. The distribution of grain size plays an important role in influencing the distribution of trace metals (Zn, Cr, Cu, V, and Pb) in sediments from the Chukchi Sea and adjacent areas.  相似文献   

16.
《Marine pollution bulletin》2014,78(1-2):274-281
Nine macroalgal blooms were studied in five coastal lagoons of the SE Gulf of California. The nutrient loads from point and diffuse sources were estimated in the proximity of the macroalgal blooms. Chlorophyll a and macroalgal biomass were measured during the dry, rainy and cold seasons. Shrimp farms were the main point source of nitrogen and phosphorus loads for the lagoons. High biomasses were found during the dry season for phytoplankton at site 6 (791.7 ± 34.6 mg m−2) and during the rainy season for macroalgae at site 4 (296.0 ± 82.4 g m−2). Depending on the season, the phytoplankton biomass ranged between 40.0 and 791.7 mg m−2 and the macroalgal biomass between 1 and 296.0 g m−2. The bulk biomass (phytoplankton + macroalgal) displayed the same tendency as the nutrient loads entering the coastal lagoons. Phytoplankton and macroalgal biomass presented a significant correlation with the atomic N:P ratio.  相似文献   

17.
The objective of this study was to explore the slope position and land use change effects on the variability in magnetic susceptibility and 137Cs inventory as the soil redistribution indicators in a hilly semiarid calcareous area in Iran. The selected study area is located in a hilly region with pasture and cultivation land use of Fereydunshahr, Isfahan Province in west-central Iran. In the two mentioned dominant ecosystems, four slope positions including summit, shoulder, backslope and footslope were identified and in each land use and slope position, three cores were selected to collect 72 soil samples from three depths (0–10, 10–20, 20–30 cm) in an area of 15 × 15 cm. Additional 28 soil samples were collected from the reference site for soil loss and deposition calculations by using the Cs-137 measurement. The results of the study with the use of the Cs-137 technique showed that the average soil loss in the pasture land (46.4 t ha− 1 yr− 1) was significantly (p < 0.05) lower than the average soil loss in the cultivated land (80.4 t ha− 1 yr− 1). The highest soil loss in both land uses was obtained in the shoulder position, 60.1 and 84.4 t ha− 1 yr− 1, respectively, for the pasture and cultivated lands. Moreover, the highest rates of soil deposition was observed in a footslope position in both land uses and they were 34 and 32.4 t ha− 1 yr− 1 for the pasture and cultivated lands, respectively. Magnetic susceptibility was significantly (p < 0.05) greater in pasture (χlf = 41.51 × 10− 8 m3/kg) than in the cultivated land (χlf = 34.90 × 10− 8 m3/kg). The pasture land with a lower soil loss rate, indicated significantly higher magnetic susceptibility in all landform positions as compared to that in the cultivated land. The results of the correlation analysis showed that among the studied soil physico-chemical properties, χlf (r = 0.83, p < 0.01) in the pasture land had the highest correlation with the Cs-137 inventory. Throughout the non-linear regression analysis, χlf was introduced for relating soil parameters and the cesium inventory explained 68% and 79% of the total variability of 137Cs in the pasture and cultivated lands, respectively. The results implied that the variability in the magnetic susceptibility within the hillslope is consistent with the variation of the Cs-inventory; and the results thus demonstrate the slope and land use effects on soil redistribution.  相似文献   

18.
Outcrops of the Cretaceous Upper sandstone formation some 375 km to the East of Addis Ababa on the motor Highway to Harar was paleomagnetically investigated. About seventy core samples were collected at various stratigraphic levels from 250–300 meters thick sedimentary formation. After standard sample preparations in the laboratory the resulting specimens were subjected to routine paleomagnetic demagnetization protocol. In the first steps of demagnetizations process the recent and viscous magnetizations were removed by heating until a temperature of level of 300 °C. Further demagnetization of the samples resulted in the isolation of the final magnetization with stable line segments that is directed towards the origin, which is interpreted as Characteristic Remanent Magnetization (ChRM). Rock – magnetic experiments have identified goethite (αFeOOH), hematite (αFe2O3), detritial hematite, and magnetite as the magnetic mineral phases carrying the remanence. The ChRM identified resulted in an average value of (Ds = 0.5°, Is = ?0.7°, α95 = 4.3°, N = 34) for the red sandstones while an average value of (Ds = 335.8°, Is = ?31.8°, α95 = 4.7°, N = 14) for the limestone intercalations. The former ChRM in the red sandstone is determined to be secondary while the latter ChRM is known to be primary. Comparison of these directional results and their pole equivalents with the African plate Apparent Polar Wander Path curve established by Besse and Courtillot (2003) give ages of between 115–130 Million years for the limestone intercalation and ages of 30 million years for red sandstone unit. These are interpreted respectively as estimates of the age of deposition and a later remagnetization respectively.  相似文献   

19.
Contamination with As, Cd and Hg, their spatial and temporal distribution are reported from the coastal wetland sediments of the northern Beibu Gulf, South China Sea. The content of As, Cd, Hg and TOC in surface sediments is 8.1 ± 5.8 μg g?1, 0.08 ± 0.14 μg g?1, 0.034 ± 0.028 μg g?1 and 0.45 ± 0.39%, respectively. The mean sedimentation rates are 0.93–1.37 cm year?1 during 1920s to 2008 determined by 210Pb and 137Cs dating in three cores. The vertical profiles of As, Cd and Hg content in the cores retrieved from Qin and Nanliu River estuaries show increasing trends during 1985–2008 due to anthropogenic impact caused by local economic development. Locally the surface sediments have potential ecological risk of As to benthos according to the NOAA sediment quality guidelines.  相似文献   

20.
Metal pollutants in water poses great threats to living beings and hence requires to be monitored regularly to avoid loss of lives. Various analytical methods are available to monitor these pollutants in water and can be improved with time. Modelling of metal pollutants in any water system helps chemists, engineers and environmentalists to greatly understand the various chemical processes in such systems. Water samples were collected from waste water treatment plant and river from highlands close to its source all the way to the ocean as it passing through areas with high anthropogenic activities. Pre-concentration of pollutants in the samples was done through acid digestion and metal pollutants were analysed using inductively coupled plasma-optical emission spectra (ICP-OES) to determine the concentration levels. Metal concentrations ranged between 0.1356–0.4658 mg/L for Al; 0.0031–0.0050 mg/L for Co, 0.0019–0.0956 mg/L for Cr; 0.0028–0.3484 mg/L for Cu; 0.0489–0.3474 mg/L for Fe; 0.0033–0.0285 mg/L for Mn; 0.0056–0.0222 mg/L for Ni; 0.0265–0.4753 mg/L for Pb and 0.0052–0.5594 mg/L for Zn. Modelling work was performed using PHREEQC couple with Geochemist’s workbench (GWB) to determine speciation dynamics and bioavailability of these pollutants. Modelling thus adds value to analytical methods and hence a better complementary tool to laboratory-based experimental studies.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号