共查询到20条相似文献，搜索用时 46 毫秒
1.
Evaluation of structural performance under seismic excitations from low intensity to high intensity is essential to verify the seismic resistant capacity of a structure, and usually carried out by the incremental dynamic analysis (IDA) method or pushover method. The recently developed endurance time (ET) method is another method that uses dynamic pushover excitations, i.e., endurance time acceleration function, to obtain results similar to those obtained by IDA or pushover methods with low computational cost and acceptable accuracy. This study proposes an improvement on the ET method by considering more restrictions for both the elastic and inelastic response spectra in the generation procedure, and by specifying a target duration. Four reinforced concrete frame structures with 4, 8, 12, and 16 stories are adopted to verify the accuracy of the improved method. Comparison of the results obtained by the proposed method, the ET method and the IDA method shows that the improved method has a higher accuracy than the ET method. For evaluation of structural responses under specific ground motion intensity, which is typically required in seismic design codes, the results obtained by the proposed method are compared with five commonly used ground motion selection methods, and shows the proposed method provides acceptable accuracy for engineering applications.
相似文献2.
Matjaz Dolsek 《地震工程与结构动力学》2009,38(6):805-825
Incremental dynamic analysis (IDA) has been extended by introducing a set of structural models in addition to the set of ground motion records which is employed in IDA analysis in order to capture record‐to‐record variability. The set of structural models reflects epistemic (modeling) uncertainties, and is determined by utilizing the latin hypercube sampling (LHS) method. The effects of both aleatory and epistemic uncertainty on seismic response parameters are therefore considered in extended IDA analysis. The proposed method has been applied to an example of the four‐storey‐reinforced concrete frame, for which pseudo‐dynamic tests were performed at the ELSA Laboratory, Ispra. The influence of epistemic uncertainty on the seismic response parameters is presented in terms of summarized IDA curves and dispersion measures. The results of extended IDA analysis are compared with the results of IDA analysis, and the sensitivity of the seismic response parameters to the input random variable using the LHS method is discussed. It is shown that epistemic uncertainty does not have significant influence on the seismic response parameters in the range far from collapse, but could have a significant influence on collapse capacity. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
3.
A cloud method for generating percentile engineering demand parameter versus intensity measure(EDP-IM) curves of a structure subjected to a set of synthetic ground motions is presented. To this end, an ensemble of synthetic ground motions based on available real ones is generated. This is done by using attenuation relationships, duration and suitable Gutenberg-Richter relations attributed to the considered seismic hazard at a given site by estimating a suitable distribution of magnitude and site to source distance. The study aims to clarify the significance of the duration and frequency content on the seismic performance of structures, which were not considered in developing percentile incremental dynamic analysis(IDA) curves. The collapse probabilities of two steel moment-resisting frames with different ductility levels generated by IDA and the proposed cloud method are compared at different intensity levels. When compared with conventional IDA, the suggested cloud analysis(SCA) methodology with the same run number of dynamic analyses was able to develop response hazard curves that were more consistent with site-specific seismic hazards. Eliminating the need to find many real records by generating synthetic records consistent with site-specific seismic hazards from a few available recorded ground motions is another advantage of using this scheme over the IDA method.. 相似文献
4.
传统方法对高层建筑框架结构抗倒塌可靠性进行评估时,只是单纯的从整体角度进行分析,导致得到的结果不够精确,无法准确反映出高层建筑框架结构的抗倒塌能力。文章提出了基于增量动力分析的高层建筑框架结构抗倒塌可靠性评估方法,对高层建筑框架结构安全储备进行详细分析,获取建筑框架结构倒塌储备系数;在此基础上,采用增量动力分析法设定高层建筑框架结构抗倒塌能力系数,并根据该系数得到高层建筑框架结构抗倒塌可靠性评估流程。测试结果表明,所提方法得出的评估结果可信度较高,实现了高层建筑框架结构抗倒塌的准确评估。 相似文献
5.
基于IDA法与Pushover法的混凝土核心筒抗震性能对比分析 总被引：1，自引：0，他引：1
足够数量地震输入的增量动力分析方法（IDA方法）是目前最为真实和先进的模拟结构抗震性能手段,而静力推覆分析方法（Pushover Analysis方法）操作简单,更为实用,可以较好揭示结构从弹性到屈服直至倒塌过程中构件的工作状态。采用2种方法对钢筋混凝土核心筒算例进行评估,并作对比分析。结果表明,采用IDA方法得到的4个性能水平与Pushover方法得到的指标限值有一定误差,但均在一定范围之内,采用IDA方法得到顶点位移角限值偏大;采用单一侧力模式的Pushover方法无法完全体现高阶振型及地震动等因素的影响,造成Pushover方法分析结果与结构实际弹塑性地震响应有一定差异。 相似文献
6.
The objective of this paper is to present incremental dynamic analysis (IDA) and seismic performance evaluation results for a two-story cold-formed steel (CFS)–framed building. The archetype building was designed to current U.S. standards and then subjected to full-scale shake table tests under the U.S. National Science Foundation Network for Earthquake Engineering Simulation (NEES) program. Test results showed that the building's stiffness and capacity were considerably higher than expected and the building suffered only nonstructural damage even at excitations in excess of Maximum Considered Earthquake levels for a high seismic zone. For the archetype building, three-dimensional finite element models at different modeling fidelity levels were created using OpenSees. The models are subjected to IDA using the far-field ground motion records prescribed in Federal Emergency Management Agency (FEMA) P695. Seismic performance quantification following the FEMA P695 procedure shows that if the modeling fidelity only follows the state-of-the-practice, ie, only includes shear walls, unsafe collapse margin ratios are predicted. State-of-the-art models that account for participation from CFS gravity walls and architectural sheathing have overall performance that are consistent with testing, and IDA results indicate acceptable collapse margin ratios, predicated primarily on large system overstrength. Neglecting the lateral force resistance of the gravity system and nonstructural components, as done in current design, renders a safe design in the studied archetype, but largely divorced from actual system behavior. The modeling protocols established here provide a means to analyze a future suite of CFS-framed archetype buildings for developing further insight on the seismic response modification coefficients for CFS-framed buildings. 相似文献
7.
The endurance time(ET) method is a dynamic analysis in which structures are subjected to intensifying excitations, also known as ET excitation functions(ETEF). The ET method is a tool for structural response prediction. The main advantage of the ET method over conventional approaches is its much lower demand for computational efforts. The concept of acceleration spectra is used in generating existing ETEFs. It is expected that ETEF acceleration spectra increase consistently with time and remain proportional to a target spectrum. Nonlinear unconstrained optimization is commonly used to generate ETEFs. Generating new ETEFs is a complicated time-consuming mathematical problem. If the target acceleration spectrum changes, new ETEFs must be generated. This study intends to modify existing ETEFs to be compatible with a desired acceleration spectrum. This process, called spectral matching, obviates the need for using the complicated generating procedure in simulating new ETEFs. ETEFs spectral matching is introduced in this paper for the first time. A Fourier-based method for ETEFs spectral matching is proposed. This algorithm is then applied in a case study. Results are presented to prove the efficiency of the algorithm. 相似文献
8.
基于倒塌率的结构倒塌易损性分析是目前评价结构抗倒塌能力最合理的方法.但是,目前基于增量动力分析(IDA)的倒塌率分析方法,工作量和实施难度大,很难直接用于工程设计,因此有必要研究便于工程应用的新方法.本文基于18个典型多层RC框架结构的IDA倒塌率分析和静力推覆分析,发现RC框架在大震下的倒塌率及抗倒塌安全储备(CMR)与静力推覆得到的结构位移安全储备之间存在较好的相关关系.依据此关系,建议了保证大震倒塌率的推覆位移安全储备,并通过9个RC框架结构算例进行了验证.本文方法简单易行,可供规则多层RC框架结构抗倒塌设计参考. 相似文献
9.
应用弹塑性反应谱对IDA方法的改进研究 总被引：6，自引：1，他引：5
针对传统IDA方法中结构的加速度反应远高于SPO分析结果的现象,采用弹塑性反应谱作为IDA的烈度度量,同时给出随地震烈度改变而不断变化的屈服强度系数,提出了改进的IDA方法,更有效地考虑了结构的非线性地震反应特征。实际工程分析表明,改进的IDA方法能够体现结构的非线性受力反应,同时兼顾结构的动力反应特征,与SPO曲线和由规范计算得到的结构承载力有更好的可比较性。 相似文献
10.
耐震时程法（ETA）仅需少量的非线性时程分析,便可以掌握结构倒塌破坏的全过程。但是,此方法目前较少应用于结构倒塌失效分析。本文探讨了耐震时程曲线的特性及拟合思路,以钢筋混凝土框架为研究对象,应用ETA方法分析了钢筋混凝土框架的地震响应及损伤发展。研究结果:（1）混凝土框架结构的地震响应分析结果表明:采用ETA方法分析时结构顶点位移和层间位移角与采用IDA方法分析时接近,而最大基底剪力会略大;但是,两种方法的结果相关系数均接近于1。（2）强震下的结构倒塌分析结果表明:ETA方法能较为准确的预测结构的塑性铰分布、塑性铰出现概率及塑性铰发展顺序。当采用多条耐震时程加速度曲线作为输入时,评估结果准确性更高。由于ETA方法仅需进行少量几条耐震时程分析且计算高效,因此ETA方法可以成为预测结构失效模式的高效方法。 相似文献
11.
《地震工程与工程振动(英文版)》2015,(3)
In an incremental dynamic analysis(IDA) using a set of ground motion records,nonlinear time history analysis needs to be performed on structures.It is well recognized that IDA calls for high computational efforts and the results are highly sensitive to selected ground motions.As a result,alternative static methods are needed.This study aims to introduce a new double-stage(N1- N2) static method to estimate capacity curves of MR frames.The technique is regulated to resemble IDA results with specific emphasis on near-field ground motions.Using an ensemble of 56 near-field earthquake records,required ID As have been carried out for SAC-Los Angeles 3-,9- and 20-story buildings and an additional 15-story building.The results of the proposed static method are compared with those from IDA,displacement-based adaptive procedure(DAP),and multimodal procedure(MMP).The results indicate that in addition to enhanced accuracy,very little time is required in the case of N1-N2 method.Thus,for the 3-story structure,the time required is less than 1 minute.The proposed N1-N2 method shows the best accuracy in terms of lateral mechanisms for the 15-story frame while for the other cases,the first mode load pattern leads to the best accuracy. 相似文献
12.
Scalar and vector intensity measures are developed for the efficient estimation of limit‐state capacities through incremental dynamic analysis (IDA) by exploiting the elastic spectral shape of individual records. IDA is a powerful analysis method that involves subjecting a structural model to several ground motion records, each scaled to multiple levels of intensity (measured by the intensity measure or IM), thus producing curves of structural response parameterized by the IM on top of which limit‐states can be defined and corresponding capacities can be calculated. When traditional IMs are used, such as the peak ground acceleration or the first‐mode spectral acceleration, the IM‐values of the capacities can display large record‐to‐record variability, forcing the use of many records to achieve reliable results. By using single optimal spectral values as well as vectors and scalar combinations of them on three multistorey buildings significant dispersion reductions are realized. Furthermore, IDA is extended to vector IMs, resulting in intricate fractile IDA surfaces. The results reveal the most influential spectral regions/periods for each limit‐state and building, illustrating the evolution of such periods as the seismic intensity and the structural response increase towards global collapse. The ordinates of the elastic spectrum and the spectral shape of each individual record are found to significantly influence the seismic performance and they are shown to provide promising candidates for highly efficient IMs. Copyright © 2005 John Wiley & Sons, Ltd. 相似文献
13.
基于增量动力分析(IDA)的倒塌易损性分析方法是评估建筑结构抗地震倒塌能力的精细方法,但分析过程比较繁杂且非常费时。为了较快地评估建筑结构的抗地震倒塌能力,首先利用静力非线性(pushover)分析,获得结构倒塌能力的初步估计值aS*,然后将每个地面运动记录调整到aS*,对结构进行动力时程分析,记录结构的动力时程反应,利用IDA的思想得到结构的中值数倒塌谱强度?CTS。该方法与传统的增量动力分析方法相比较,可提高计算效率,计算精度也满足要求。 相似文献
14.
Effect of ground motion selection methods on seismic collapse fragility of RC frame buildings 总被引：1，自引：0，他引：1 
下载免费PDF全文
下载免费PDF全文 Variation in the seismic collapse fragility of reinforced concrete frame buildings predicted using different ground motion (GM) selection methods is investigated in this paper. To simulate the structural collapse, a fiber‐element modelling approach with path‐dependent cyclic nonlinear material models that account for concrete confinement and crushing, reinforcement buckling as well as low cycle fatigue is used. The adopted fiber analysis approach has been found to reliably predict the loss in vertical load carrying capacity of structural components in addition to the sidesway mode of collapse due to destabilizing P–Δ moments at large inelastic deflections. Multiple stripe analysis is performed by conducting response history analyses at various hazard levels to generate the collapse fragility curves. To select GMs at various hazard levels, two alternatives of uniform hazard spectrum (UHS), conditional mean spectrum (CMS) and generalized conditional intensity measure (GCIM) are used. Collapse analyses are repeated based on structural periods corresponding to initial un‐cracked stiffness and cracked stiffness of the frame members. A return period‐based intensity measure is then introduced and applied in estimating collapse fragility of frame buildings. In line with the results of previous research, it is shown that the choice of structural period significantly affects the collapse fragility predictions. Among the GM selection methods used in this study, GCIM and CMS methods predict similar collapse fragilities for the case study building investigated herein, and UHS provides the most conservative prediction of the collapse capacity, with approximately 40% smaller median collapse capacity compared to the CMS method. The results confirm that collapse probability prediction of buildings using UHS offers a higher level of conservatism in comparison to the other selection methods. Copyright © 2017 John Wiley & Sons, Ltd. 相似文献
15.
A simplified multisupport response spectrum method is presented.The structural response is a sum of two components of a structure with a first natural period less than 2 s.The first component is the pseudostatic response caused by the inconsistent motions of the structural supports,and the second is the structural dynamic response to ground motion accelerations.This method is formally consistent with the classical response spectrum method,and the effects of multisupport excitation are considered for any modal response spectrum or modal superposition.If the seismic inputs at each support are the same,the support displacements caused by the pseudostatic response become rigid body displacements.The response spectrum in the case of multisupport excitations then reduces to that for uniform excitations.In other words,this multisupport response spectrum method is a modification and extension of the existing response spectrum method under uniform excitation.Moreover,most of the coherency coefficients in this formulation are simplified by approximating the ground motion excitation as white noise.The results indicate that this simplification can reduce the calculation time while maintaining accuracy.Furthermore,the internal forces obtained by the multisupport response spectrum method are compared with those produced by the traditional response spectrum method in two case studies of existing long-span structures.Because the effects of inconsistent support displacements are not considered in the traditional response spectrum method,the values of internal forces near the supports are underestimated.These regions are important potential failure points and deserve special attention in the seismic design of reticulated structures. 相似文献
16.
Collapse risk and residual drift performance of steel buildings using post-tensioned MRFs and viscous dampers in near-fault regions 总被引：1，自引：1，他引：0
A. S. Tzimas G. S. Kamaris T. L. Karavasilis C. Galasso 《Bulletin of Earthquake Engineering》2016,14(6):1643-1662
The potential of post-tensioned self-centering moment-resisting frames (SC-MRFs) and viscous dampers to reduce the collapse risk and improve the residual drift performance of steel buildings in near-fault regions is evaluated. For this purpose, a prototype steel building is designed using different seismic-resistant frames, i.e.: moment-resisting frames (MRFs); MRFs with viscous dampers; SC-MRFs; and SC-MRFs with viscous dampers. The frames are modeled in OpenSees where material and geometrical nonlinearities are taken into account as well as stiffness and strength deterioration. A database of 91 near-fault, pulse-like ground motions with varying pulse periods is used to conduct incremental dynamic analysis (IDA), in which each ground motion is scaled until collapse occurs. The probability of collapse and the probability of exceeding different residual story drift threshold values are calculated as a function of the ground motion intensity and the period of the velocity pulse. The results of IDA are then combined with probabilistic seismic hazard analysis models that account for near-fault directivity to assess and compare the collapse risk and the residual drift performance of the frames. The paper highlights the benefit of combining the post-tensioning and supplemental viscous damping technologies in the near-source. In particular, the SC-MRF with viscous dampers is found to achieve significant reductions in collapse risk and probability of exceedance of residual story drift threshold values compared to the MRF. 相似文献
17.
A stochastic method has been developed for seismic analysis of structures and piping systems subjected to multiple support excitations. In either the time or the frequency domain, mean and extreme values of structural and piping system response can be found, including the effects of cross-correlations of modal response and cross-correlations of multiple support excitations. Stationary white noise and stationary filtered white noise ground excitations are used. A computer program has been developed to carry out the stochastic seismic analysis. Results for a realistic nuclear power plant structure and piping system with and without modal cross-correlations and support excitation cross-correlations are compared. From these results, it is concluded that neglecting cross-correlations can lead to large errors. The stochastic method reported is shown to be more accurate than the response spectrum method and more economical than the time-history method; therefore, it is recommended for seismic analysis of nuclear power plants. 相似文献
18.
进水塔结构作为水电站的进水建筑物,其抗震性能对水电站的安全运行有重要意义。以沙牌水电站的高耸独立进水塔结构为研究对象,应用3条耐震时程曲线对其进行抗震性能分析与评估,并将计算结果与天然地震动下的增量动力分析结果进行比较,对比分析进水塔塔顶位移、基底剪力及地震损伤历程。实例研究表明：耐震时程法可以较好地分析结构的抗震响应,与增量动力分析结果的均值相匹配。耐震时程法可以利用较少的时程分析得到不同动力强度作用下的结构响应,且计算结果精度好、效率高,为进水塔结构的抗震性能分析提供一种新的手段。 相似文献
19.
Different performance levels may be obtained for sideway collapse evaluation of steel moment frames depending on the evaluation procedure used to handle uncertainties. In this article, the process of representing modelling uncertainties, record to record (RTR) variations and cognitive uncertainties for moment resisting steel frames of various heights is discussed in detail. RTR uncertainty is used by incremental dynamic analysis (IDA), modelling uncertainties are considered through backbone curves and hysteresis loops of component, and cognitive uncertainty is presented in three levels of material quality. IDA is used to evaluate RTR uncertainty based on strong ground motion records selected by the k-means algorithm, which is favoured over Monte Carlo selection due to its time saving appeal. Analytical equations of the Response Surface Method are obtained through IDA results by the Cuckoo algorithm, which predicts the mean and standard deviation of the collapse fragility curve. The Takagi-Sugeno-Kang model is used to represent material quality based on the response surface coefficients. Finally, collapse fragility curves with the various sources of uncertainties mentioned are derived through a large number of material quality values and meta variables inferred by the Takagi-Sugeno-Kang fuzzy model based on response surface method coefficients. It is concluded that a better risk management strategy in countries where material quality control is weak, is to account for cognitive uncertainties in fragility curves and the mean annual frequency. 相似文献
20.
提出基于构件性能的混凝土高层建筑结构地震破坏抗毁能力评估方法,采用强度与延性法分析混凝土高层建筑构件强度和变形,以对强震作用下混凝土高层建筑结构性能实施准确描述。基于建筑结构性能以及多条地震波情况下高层建筑结构倒塌极限状态的分析规范,采用IDA方法设置建筑结构抗倒塌能力系数,并依据该系数获取基于构件性能的混凝土高层建筑结构地震破坏抗毁能力评估流程,实现建筑结构地震破坏抗毁能力的准确评估。实验结果说明,所提方法实现了混凝土高层建筑结构地震破坏抗毁能力的准确评估。 相似文献