共查询到20条相似文献，搜索用时 93 毫秒
1.
介绍了用GPS连续观测资料反演断层运动的方法——网络滤波方法。用此方法探讨了华北地块边界带运动特征,并与发生在边界带附近和地块内部的地震活动及周边强震进行了比较,得出以下初步结论:郯庐大断裂和山西断陷盆地带的滑动量为1mm左右,整体活动水平有减弱的趋势;张家口—渤海断裂带滑动量为0.5mm左右,活动性逐渐增强;秦岭—大别山断裂内滑动量为0.5mm左右,活动性逐渐减弱。在2002年底至2003年底一年左右的时间内,华北地块边界带的滑动速率发生较大幅度的变化,同时,各边界带(秦岭—大别山断裂除外)的地震活动水平在2003年底达到高峰,说明边界带滑动速率急剧变化的结果导致边界带附近地震活动水平的加剧。另外,边界带滑动的特点表明了华北地块构造运动的整体性,推断华北地块的地壳运动可能与来自地球深部的地幔对流有关。 相似文献
2.
断裂晚第四纪滑动速率及现今GPS观测揭示了青藏高原向北扩展与高原边缘隆升的运动特征.主要断裂晚第四纪滑动速率及跨断裂GPS应变速率的结果表明,青藏高原北部边缘的断裂以低滑动速率（＜10 mm/a）为主,特别是两条边界断裂：阿尔金断裂和海原—祁连山断裂.两条主要边界断裂上的滑动速率分布显示了断裂间滑动速率转换及调整特征.阿尔金断裂自95°E以西的8～12 mm/a稳定滑动速率,向东逐渐降低到最东端的约1～2 mm/a,而海原断裂自哈拉湖一带开始发育后滑动速率为1～2 mm/a,到祁连一带（101°E以东）增大到相对稳定的4～5 mm/a,直到过海原后转向六盘山一带,滑动速率降低到1～3 mm/a,甚至更低.滑动速率的变化及分布特征显示,阿尔金断裂滑动主要是通过祁连山内部隆起及两侧新生代盆地变形引起的缩短来吸收的,海原—祁连山断裂的低滑动速率及沿断裂运动学特征表明断裂尾端的陇西盆地变形及六盘山的隆起是断裂左旋走滑速率的主要吸收方式.这一变形特征表明,青藏高原北部边缘的变形模式是一种分布式的连续变形,变形发生自高原内部,边界断裂的走滑被高原内部变形所吸收. 相似文献
3.
巴颜喀拉地块东部龙日坝断裂带的发现及其大地构造意义 总被引：27，自引：0，他引：27
在青藏高原东缘NE向龙门山断裂带西北侧约200km的巴颜喀拉地块东部,由GPS复测发现存在一条宽阔的NE向右旋剪变带,变形速率达4-6mm／a．卫星影像解译和野外考察表明：这一右旋剪切带对应了以往被忽略的、新生的NE向龙日坝断裂带．龙日坝断裂带北东段由走向N54°±5°E、相距约30km的两条平行分支断层组成．这两条分支断层沿线晚第四纪断错地貌发育,北支龙日曲断层具有较大的逆冲分量,南支毛尔盖断层为纯右旋走滑断层．依据矢量合成原理可知,龙日坝断裂带北东段晚更新世以来平均右旋滑动速率为（5．4±2．0）mm／a,垂直滑动速率约0．7mm／a,地壳缩短率约0．55mm／a．龙日坝断裂带的存在和发现可以很好地解释青藏高原东缘的大地构造与动力学特征：以龙日坝断裂带为界,巴颜喀拉地块分为西部阿坝和东部龙门山两个次级块体;龙门山次级块体的整体缩短和隆升反映出从龙门山断裂带到龙日坝断裂带是巴颜喀拉地块南东向运移过程中由于受到华南地块的强烈阻挡而形成的后展式推覆构造系统,并成为青藏高原东缘承载新生代晚期至今地壳变形的一种活动地块边界构造类型．龙日坝断裂带正是这一系统中晚第四纪新生的活动断裂带． 相似文献
4.
发生在同一断层部位上0.5～4.0 级的重复地震(也称重复微震)是研究断裂带深部变形的天然(有力)工具.本文系统汇集了川滇地区主要断裂带识别出的 76 组重复地震研究结果,构建了川滇地区重复地震的时空分布图像和断裂带深部变形时空演化特征,结果表明:丽江—宁蒗断裂带在脆韧转换带约23 km深处的滑动速率为4.3～5.4 mm·a－1 ,小江断裂带3.0～12.3 km深处的滑动速率为 1.6～10.1 mm·a－1 ,红河断裂带北段在 6.0～13.4 km深处的滑动速率为2.3～10.0 mm·a－1 ,鲜水河断裂带南段 3.0～18.7 km深处的滑动速率为 3.0～10.2 mm·a－1 ,龙门山断裂带在4.0～17.3 km的汶川 8.0级地震孕育深处的滑动速率为 3.5～9.6 mm·a－1 ,龙门山断裂带南端3.6～18.7 km处滑动速率为 5.8～10.2 mm·a－1 .综合分析认为:川滇地区主要边界断裂带的深部滑动速率较为一致,揭示了川滇地块和巴颜喀拉地块整体协同变形的特征.由重复微震与深部滑动速率变化构建了孕震深处的变形模式,即重复微震与断裂带局部闭锁段在空间位置上存在密切的关联性,强震前孕震闭锁区存在明显的深浅部构造形变差异,震前存在的深部加速变形过程可能是断层亚失稳阶段的具体表征. 相似文献
5.
西大滩隐伏断层位于银川盆地北部,是石嘴山市活断层探测项目的目标断层之一。在浅层地震勘探的基础上,通过钻孔联合剖面探测和钻孔样品年龄测试,获得断层上断点埋深、主要标志层断距及沉积年龄等数据,估算了晚第四纪不同时段断层的滑动速率,结合地层变形情况探讨了该断层晚第四纪的活动特征。结果表明,西大滩隐伏断层自12 275±45aB.P.以来没有发生明显活动,属晚更新世末活动断层;晚更新世以来断层活动偏弱,平均滑动速率为0.024mm/a;除断层活动外,伴随着地层倾斜变形;两者均具间歇活动的特点,最小间隔约6 600a,最大间隔期12 275a。 相似文献
6.
7.
热水 -日月山断裂带是发育在青藏高原东北缘柴达木 -祁连活动地块内部的 1条重要的NNW向逆 -右旋走滑活动断裂带 ,长约 183km。断裂由 4条不连续的次级断裂段右阶羽列而成 ,阶距 2～ 3km左右 ,在不连续部位形成拉分区。主断裂两端则形成帚状分叉。断裂活动形成了一系列山脊、冲沟和阶地等右旋断错微地貌 ,其中Ⅰ级阶地右旋断错约 8～ 11m ,Ⅱ级阶地右旋断错约 35m。同时沿断裂带还形成了许多断层陡坎 ,Ⅰ级阶地或洪积台地上断层陡坎高约 0 .5～ 1m ,最高达 2 .8m ,Ⅱ级阶地或台地上的断层陡坎高约 2 .5～ 3m ,最高达 4～ 5m。根据相应的阶地年代 ,计算得到断裂带全新世以来的平均水平滑动速率为 3 16mm/a ,垂直滑动速率为 0 .83mm/a 相似文献
8.
用 4 4 2次中强地震的震源机制解分析了川滇次级地块应力场的优势方向。使用 771次 3级左右地震的滑动角λ参数统计确定震源断层的错动方式 ,并用中强地震P波初动解的N轴仰角的统计分布结果得到的震源断层错动或滑动型式去佐证。拟合中强地震的矩张量速率式 ,计算了川滇次级地块各地震构造区的年均滑动速率 ,并进行比较。根据 1980— 2 0 0 1年川青地块、雅江地块和滇中地块边界断裂带跨断层短水准、短基线定期复测结果 ,分析了水平和垂向年均形变速率。川滇地块间的运动是不均匀的。川青地块的运动方向为SEE。雅江地块压应力场优势方向为SSE ,相对川青地块的运动速率更大。滇中地块承袭雅江地块的运动方向 ,略偏东。密支那滇西地块压应力场有 2组优势方向 ,存在向NE方向的推挤和SSE方向的逃逸 ,活动速率大 相似文献
9.
中甸-大具断裂南东段位于哈巴和玉龙雪山北麓,属于川西北次级块体西南边界,断裂总体走向310°~320°,是一条重要的边界断裂。了解该断裂的活动性质、活动时代和滑动速率等对分析川西北次级块体运动,研究该断裂与玉龙雪山东麓断裂的交切关系等问题具有重要意义。文中基于1︰5万活动断层地质填图,对断裂沿线地层地貌、陡坎地貌、地表破裂、典型断层剖面以及河流阶地等进行了详细的研究。研究表明:1)中甸-大具断裂南东段按几何结构、断错地貌表现、断裂活动性可分为马家村—大具次级段和大具—大东次级段。2)通过野外地质调查发现,马家村—大具次级段断错了全新世冲洪积扇,形成了地表破裂,为全新世活动段;而大具—大东次级段虽然也断错了晚更新—全新世地层,但其断错规模及滑动速率均较小,由此认为其全新世以来活动较弱。3)通过分析断裂沿线断层陡坎、水平位错及地表破裂等地质地貌问题,认为马家村—大具次级段的活动性质为右旋走滑兼正断,其晚更新世以来的垂直滑动速率为0.4~0.8mm/a,水平滑动速率为1.5~2.4mm/a;大具—大东次级段以右旋走滑为主、正断为辅,其晚更新世晚期以来的垂直滑动速率为0.1mm/a。4)在大具盆地内发现的NW向地表破裂带的形成时代很年轻,不排除是1966年中甸6.4级地震或1996年丽江7.0级地震造成的地表破裂。 相似文献
10.
阿尔金断裂带作为青藏高原北部边界 ,其走滑量和走滑速率一直为地学界所关注 ,对这样一条大陆内部巨型走滑断裂带的滑动速率进行研究 ,对于了解阿尔金断裂带左旋走滑和青藏高原北部隆升之间的耦合关系 ,具有重要意义。在阿尔金断裂带东段的疏勒河口以西 ,阿尔金断裂错断了几条规模相近的河流阶地和洪积扇 ,形成典型的走滑断层断错地貌。通过对这些典型断错地貌点的地貌观测和年代学研究 ,得到阿尔金断裂带东段石堡城以东疏勒河以西自 2 0kaBP以来的滑动速率约为 4～ 5mm/a。自 50kaBP以来 ,阿尔金断裂带东段断层平均滑动速率具有较高的时间、空间一致性 ,约为 4～ 6mm/a ,表明利用河流阶地和洪积扇位错作为断层走滑位移标志计算断层滑动速率 ,具有较高的可信度 相似文献
11.
12.
MIGRATION OF LARGE EARTHQUAKES IN TIBETAN BLOCK AREA AND DISSCUSSION ON MAJOR ACTIVE REGION IN THE FUTURE 
下载免费PDF全文
下载免费PDF全文 YUAN Dao-yang FENG Jian-gang ZHENG Wen-jun LIU Xing-wang GE Wei-peng WANG Wei-tong 《地震地质》1979,42(2):297-315
On the basis of summarizing the circulation characteristics and mechanism of earthquakes with magnitude 7 or above in continental China, the spatial-temporal migration characteristics, mechanism and future development trend of earthquakes with magnitude above 7 in Tibetan block area are analyzed comprehensively. The results show that there are temporal clustering and spatial zoning of regional strong earthquakes and large earthquakes in continental China, and they show the characteristics of migration and circulation in time and space. In the past 100a, there are four major earthquake cluster areas that have migrated from west to east and from south to north, i.e. 1)Himalayan seismic belt and Tianshan-Baikal seismic belt; 2)Mid-north to north-south seismic belt in Tibetan block area; 3)North-south seismic belt-periphery of Assam cape; and 4)North China and Sichuan-Yunnan area. The cluster time of each area is about 20a, and a complete cycle time is about 80a. The temporal and spatial images of the migration and circulation of strong earthquakes are consistent with the motion velocity field images obtained through GPS observations in continental China. The mechanism is related to the latest tectonic activity in continental China, which is mainly affected by the continuous compression of the Indian plate to the north on the Eurasian plate, the rotation of the Tibetan plateau around the eastern Himalayan syntaxis, and the additional stress field caused by the change of the earth's rotation speed.
Since 1900AD, the Tibetan block area has experienced three periods of high tides of earthquake activity clusters(also known as earthquake series), among which the Haiyuan-Gulang earthquake series from 1920 to 1937 mainly occurred around the active block boundary structural belt on the periphery of the Tibetan block region, with the largest earthquake occurring on the large active fault zone in the northeastern boundary belt. The Chayu-Dangxiong earthquake series from 1947 to 1976 mainly occurred around the large-scale boundary active faults of Qiangtang block, Bayankala block and eastern Himalayan syntaxis within the Tibetan block area. In the 1995-present Kunlun-Wenchuan earthquake series, 8 earthquakes with MS7.0 or above have occurred on the boundary fault zones of the Bayankala block. Therefore, the Bayankala block has become the main area of large earthquake activity on the Tibetan plateau in the past 20a. The clustering characteristic of this kind of seismic activity shows that in a certain period of time, strong earthquake activity can occur on the boundary fault zone of the same block or closely related blocks driven by a unified dynamic mechanism, reflecting the overall movement characteristics of the block. The migration images of the main active areas of the three earthquake series reflect the current tectonic deformation process of the Tibetan block region, where the tectonic activity is gradually converging inward from the boundary tectonic belt around the block, and the compression uplift and extrusion to the south and east occurs in the plateau. This mechanism of gradual migration and repeated activities from the periphery to the middle can be explained by coupled block movement and continuous deformation model, which conforms to the dynamic model of the active tectonic block hypothesis.
A comprehensive analysis shows that the Kunlun-Wenchuan earthquake series, which has lasted for more than 20a, is likely to come to an end. In the next 20a, the main active area of the major earthquakes with magnitude 7 on the continental China may migrate to the peripheral boundary zone of the Tibetan block. The focus is on the eastern boundary structural zone, i.e. the generalized north-south seismic belt. At the same time, attention should be paid to the earthquake-prone favorable regions such as the seismic empty sections of the major active faults in the northern Qaidam block boundary zone and other regions. For the northern region of the Tibetan block, the areas where the earthquakes of magnitude 7 or above are most likely to occur in the future will be the boundary structural zones of Qaidam active tectonic block, including Qilian-Haiyuan fault zone, the northern margin fault zone of western Qinling, the eastern Kunlun fault zone and the Altyn Tagh fault zone, etc., as well as the empty zones or empty fault segments with long elapse time of paleo-earthquake or no large historical earthquake rupture in their structural transformation zones. In future work, in-depth research on the seismogenic tectonic environment in the above areas should be strengthened, including fracture geometry, physical properties of media, fracture activity behavior, earthquake recurrence rule, strain accumulation degree, etc., and then targeted strengthening tracking monitoring and earthquake disaster prevention should be carried out. 相似文献
Since 1900AD, the Tibetan block area has experienced three periods of high tides of earthquake activity clusters(also known as earthquake series), among which the Haiyuan-Gulang earthquake series from 1920 to 1937 mainly occurred around the active block boundary structural belt on the periphery of the Tibetan block region, with the largest earthquake occurring on the large active fault zone in the northeastern boundary belt. The Chayu-Dangxiong earthquake series from 1947 to 1976 mainly occurred around the large-scale boundary active faults of Qiangtang block, Bayankala block and eastern Himalayan syntaxis within the Tibetan block area. In the 1995-present Kunlun-Wenchuan earthquake series, 8 earthquakes with MS7.0 or above have occurred on the boundary fault zones of the Bayankala block. Therefore, the Bayankala block has become the main area of large earthquake activity on the Tibetan plateau in the past 20a. The clustering characteristic of this kind of seismic activity shows that in a certain period of time, strong earthquake activity can occur on the boundary fault zone of the same block or closely related blocks driven by a unified dynamic mechanism, reflecting the overall movement characteristics of the block. The migration images of the main active areas of the three earthquake series reflect the current tectonic deformation process of the Tibetan block region, where the tectonic activity is gradually converging inward from the boundary tectonic belt around the block, and the compression uplift and extrusion to the south and east occurs in the plateau. This mechanism of gradual migration and repeated activities from the periphery to the middle can be explained by coupled block movement and continuous deformation model, which conforms to the dynamic model of the active tectonic block hypothesis.
A comprehensive analysis shows that the Kunlun-Wenchuan earthquake series, which has lasted for more than 20a, is likely to come to an end. In the next 20a, the main active area of the major earthquakes with magnitude 7 on the continental China may migrate to the peripheral boundary zone of the Tibetan block. The focus is on the eastern boundary structural zone, i.e. the generalized north-south seismic belt. At the same time, attention should be paid to the earthquake-prone favorable regions such as the seismic empty sections of the major active faults in the northern Qaidam block boundary zone and other regions. For the northern region of the Tibetan block, the areas where the earthquakes of magnitude 7 or above are most likely to occur in the future will be the boundary structural zones of Qaidam active tectonic block, including Qilian-Haiyuan fault zone, the northern margin fault zone of western Qinling, the eastern Kunlun fault zone and the Altyn Tagh fault zone, etc., as well as the empty zones or empty fault segments with long elapse time of paleo-earthquake or no large historical earthquake rupture in their structural transformation zones. In future work, in-depth research on the seismogenic tectonic environment in the above areas should be strengthened, including fracture geometry, physical properties of media, fracture activity behavior, earthquake recurrence rule, strain accumulation degree, etc., and then targeted strengthening tracking monitoring and earthquake disaster prevention should be carried out. 相似文献
13.
Evolution characteristics of Quaternary tectonic stress field in the north and east margin of Qinghai-Xizang plateau 总被引：4，自引：1，他引：3
By inversion of fault slip data for Quaternary tectonic stress field and the analysis of crustal deformation after late Teriary, we explained the evolution of crustal dynamic about the north and east margin of Qinghai-Xizang (Tibet) plateau since Miocene. From middle or late Miocene to early Pleistocene, the tectonic stress field was featured by a maximum principal compression which was coming from the collision of India Plate perpendicular to the boundary of the plateau, and was basically of reverse faulting type. Since the late period of early Pleistocene, India Plate continued to push northward and the compressional deformation of the plateau interior increased continuously, meanwhile, NW-SE extension appeared on the east side of the plateau. This formed a favorable condition for the interior block of the plateau to slide towards east and southeast, causing the faults surrounding the plateau to change from thrust to strike-slip. The contemporary tectonic stress field was formed from the late period of early Pleistocene and continued to present. The direction of maximum principal compressional stress rotated clockwise with respect to the previous tectonic stress field, the stress field was mainly of strike-slip type. 相似文献
14.
利用哈佛全球矩心矩张量解数据和许忠淮认为1920mdash;1999年可靠的中国大陆震源机制解数据, 反演了中国西部及邻区活动地块边界带上现代构造应力场．通过对FMSI反演程序多次的输入和检验, 得到了边界带上的应力场．边界带上最大主压应力sigma;1轴绝大多数近水平. 在90deg;E以西的中国西部大陆及邻区, sigma;1轴水平方向基本上为近SN向;在青藏高原的东北部, sigma;1轴水平方向基本上为近NE向;在青藏高原的东南部, sigma;1轴水平方向绕喜马拉雅构造东端顺时针方向旋转．最小主压应力sigma;3轴倾角呈两极分布,西域地块区内活动地块边界带和青藏地块区内东北缘部分段sigma;3轴倾角较陡, 而青藏地块区内sigma;3轴倾角近水平, 所以西域地块区和青藏地块区内东北部相对于其它大部分青藏地块区, 有更多的逆冲地震．应力场在同一个边界带具有非均匀性. 北天山带、南天山带、西秦岭mdash;德令哈带、岷山mdash;龙门山带和安宁河mdash;小江带的非均匀性相对要小一些, 西昆仑带、海原mdash;祁连带、东昆仑带、玛尼mdash;玉树带、澜沧江带和滇西西边界带的非均匀性相对要大, 而喀喇昆仑mdash;嘉黎带和喜马拉雅带的非均匀性最显著．由于震源机制解数据的限制, 本文给出的是边界带上部分段的应力场． 相似文献
15.
PROGRESS IN APPLICATION OF GNSS TO DIVISION OF ACTIVE TECTONIC BLOCKS IN CONTINENTAL CHINA 下载免费PDF全文
下载免费PDF全文 Chinese scientists proposed that large earthquakes that occurred in mainland China are controlled by the movement and deformation of active tectonic blocks. This scientific hypothesis explains zoned phenomenon of seismicity in space. The active tectonic blocks are intense active terranes formed in late Cenozoic and late Quaternary, and the tectonic activity of block boundaries is the intensest. Global Navigation Satellite System(GNSS)has advantages of high spatio-temporal resolution, broad coverage, and high accuracy, and is utilized to monitor contemporary crustal deformation. High accuracy and resolution of GNSS velocity field within mainland China and vicinities provided by previous studies clearly demonstrate that different active tectonic blocks behave as different patterns of movement and deformation, and block interaction boundaries have intense tectonic deformation. The paper firstly introduces the GPS networks operated by the Crustal Movement Observation Network of China(CMONOC)since 1999, and GNSS data processing methods, including GAMIT, BERNESE and GIPSY/OASIS, and discusses the advantages of using South China block as a regional reference frame for GNSS velocity field, then proposes three strategies of block division, F-test, quasi-accurate detection(QUAD), and clustering analysis. Furthermore, we introduce rigid and non-rigid block motions. Rigid block motion can be denoted by translation and rotation, while non-rigid block motion can be described by rigid motion and internal strain deformation. Internal strain deformation can be divided into uniform and linear strains. We also review the usage of F-test to distinguish whether the block acts as rigid deformation or not. In addition, combining with recent GNSS velocity results, we elaborate the characteristics of present movement of rigid block, such as the South China, Tarim, Ordos, Alashan, and Northeast China, and that of non-rigid block, such as the Tibetan plateau, Tian Shan, and North China plain. Especially, the Tibetan plateau and Tian Shan seem to deform continuously with significant internal deformation. In order to enrich and perfect the active tectonic block hypothesis, we should carefully design dense GNSS networks in inner blocks and block boundaries, optimize utilizing other space geodesy technologies such as InSAR, and strengthen combining study of geodesy, seismogeology and geophysics. Through systematic summary, this paper is very useful to employing GNSS to investigate characteristics of block movement and dynamics of large earthquakes happening in block interaction boundaries. 相似文献
16.
中国西部三维速度结构及其各向异性 总被引：24，自引：5，他引：24
本文用覆盖中国的358条勒夫面波路径资料,研究了10.45-113.80s范围内中国西部的三维SH波速度结构.结果表明,各构造单元的SH波速度结构均有明显的差别.作为稳定块体的塔里木盆地,壳内重力分异程度较高,上、中、下地壳厚度差别小,壳内无明显的低速层,地壳平均速度比较小;上地幔低速层埋深大且层中速度大;区内横向变化小.构造活动区如天山、青藏高原,其突出的特征是下地壳厚度大且速度大,上地幔盖层速度值相当高.这与西伯利亚、印支板块的挤压有密切的关系.青藏高原东部及其北、东边缘地区壳内存在低速层,上地幔低速层埋深浅,一些地区存在壳幔过渡层.面波各向异性研究表明,青藏高原、天山及印支板块北缘下存在明显的各向异性,以构造边缘地区及上地幔低速层附近最为突出.印度板块、西伯利亚板块与中国大陆间的碰撞引起强大的水平压力和一定的下插作用,是造成青藏高原隆起、地壳增厚、天山隆起的最根本的因素,同时也促成壳幔中辉石、橄榄石的定向排列和物质运移,因而出现明显的各向异性现象. 相似文献
17.
18.
PRESENT KINEMATICS CHARACTERISTICS OF THE NORTHERN YUMUSHAN ACTIVE FAULT AND ITS RESPONSE TO THE NORTHEASTWARD GROWTH OF THE TIBETAN PLATEAU 下载免费PDF全文
下载免费PDF全文 CHEN Gan ZHENG Wen-jun WANG Xu-long ZHANG Pei-zhen XIONG Jian-guo YU Jin-xing LIU Xing-wang BI Hai-yun LIU Jin-rui AI Ming 《地震地质》2017,39(5):871-888
Qilian Shan and Hexi Corridor, located in the north of Tibetan plateau, are the margin of Tibetan plateau's tectonic deformation and pushing. Its internal deformations and activities can greatly conserve the extension process and characteristics of the Plateau. The research of Qilian Shan and Hexi Corridor consequentially plays a significant role in understanding tectonic deformation mechanism of Tibetan plateau. The northern Yumushan Fault, located in the middle of the northern Qilian Shan thrust belt, is a significant component of Qilian Shan thrust belt which divides Yumushan and intramontane basins in Hexi Corridor. Carrying out the research of Yumushan Fault will help explain the kinematics characteristics of the northern Yumushan active fault and its response to the northeastward growth of the Tibetan plateau.Because of limited technology conditions of the time, different research emphases and some other reasons, previous research results differ dramatically. This paper summarizes the last 20 years researches from the perspectives of fault slip rates, paleao-earthquake characteristics and tectonic deformation. Using aerial-photo morphological analysis, field investigation, optical simulated luminescence(OSL)dating of alluvial surfaces and topographic profiles, we calculate the vertical slip rate and strike-slip rate at the typical site in the northern Yumushan Fault, which is(0.55±0.15)mm/a and(0.95±0.11), respectively. On the controversial problems, namely "the Luotuo(Camel)city scarp" and the 180 A.D. Biaoshi earthquake, we use aerial-photo analysis, particular field investigation and typical profile dating. We concluded that "Luotuo city scarp" is the ruin of ancient diversion works rather than the fault scarp of the 180 A.D. Biaoshi earthquake. Combining the topographic profiles of the mountain range with fault characteristics, we believe Yumu Shan is a part of Qilian Shan. The uplift of Yumu Shan is the result of Qilian Shan and Yumu Shan itself pushing northwards. Topographic profile along the crest of the Yumu Shan illustrates the decrease from its center to the tips, which is similar to the vertical slip rates and the height of fault scarp. These show that Yumu Shan is controlled by fault extension and grows laterally and vertically. At present, fault activities are still concentrated near the north foot of Yumu Shan, and the mountain ranges continue to rise since late Cenozoic. 相似文献
19.
As a result of the left-lateral strike-slipping of the Altyn Tagh fault in Neotectonic period, a contra-rotational structure, namely the Zhaobishan vortex structure, has developed at the juncture of the main Altyn Tagh fault and the northern fringe fault of the Qilian Mountains.Preliminary analysis on the deformation and evolution of the Zhaobishan vortex structure. In combination with the previous data, suggests that the tectonic transform between the Altyn Tagh fault and the northern fringe fault of the Qilian Mountains attributes to the deformation of the rotational structure. The existence of a series of rotational structures along the Altyn Tagh fault and on the northeastern edge of the Qinghai-Xizang(Tibet) plateau indicate that as the substance in the northern Qinghal-Xizang (Tibet) plateau moves clockwise around the eastern tectonic knot of the Himalayas, rotational structures become the principal mode on the northern marginal zone of the Plateau of transforming and absorbing tectonic deformation. 相似文献