首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 625 毫秒
1.
The directional effect of shaped charge is a well-known feature used for a long time in military weapons, oil well guns, and steel industry. This charge was successfully applied as a seismic energy source by Petrobrás during the past three years under different surface and geological conditions. Preliminary amplitude measurements taken with fixed gain shallow refraction instruments showed a consistent difference between conventional and shaped charges. Lately, a similar difference has been noted in deep reflection energy recorded with digital binary gain instruments as well as in deep oil well velocity surveys. Direct comparisons along more than 50 km of multiple coverage field reflection shooting are in agreement with these results and have proved the practical advantage of this source as compared to conventional dynamite. This source has been used since 1971 in routine seismic operation in the Amazon jungle with 300 gram unit charges distributed in small and large shot arrays increasing substantially the coverage and halving the cost at a higher record quality. A large amount of production seismic field work has been carried out in several other areas attesting the successful application of the shaped charges.  相似文献   

2.
近年来,长偏移距排列逐渐被大量应用到海上勘探。传统AVO分析都是小入射角,对于长偏移距数据来说有很大不足。为了探讨拓宽AVO分析的研究范围,本文推导了长偏移距时P波反射系数的一种近似公式,并讨论了其精确性。本文的结果和广泛应用的Shuey公式相类似,Shuey公式可以看作本文结果在小入射角情况的简化。  相似文献   

3.
近年来,长偏移距排列逐渐被大量应用到海上勘探。传统AVO分析都是小入射角,对于长偏移距数据来说有很大不足。为了探讨拓宽AVO分析的研究范围,本文推导了长偏移距时P波反射系数的一种近似公式,并讨论了其精确性。本文的结果和广泛应用的Shuey公式相类似,Shuey公式可以看作本文结果在小入射角情况的简化。  相似文献   

4.
应用三分量浅层地震反射方法探测隐伏活动断裂   总被引:5,自引:2,他引:3       下载免费PDF全文
多波多分量地震勘探方法在油气田勘探开发中日益受到重视,但在工程和活动断裂探测中过去还没有开展多波多分量地震勘探的先例.本文简要介绍了在北京黄庄—高丽营断裂上开展的三分量浅层地震反射试验数据采集和资料处理方法,以及取得的初步结果.试验结果表明,采用纵波震源或横波震源激发、三分量接收的浅层地震勘探方法,可获得较高信噪比的浅层地震纵波、横波和转换波剖面,特别是水平分量采集的横波和转换波可提供很有意义的地下结构和构造信息.综合利用纵波、横波和转换波剖面特征进行的地质分层和断层解释结果取得了与跨断层的钻孔联合地质剖面结果较好的一致性.  相似文献   

5.
为查明夏垫断裂东北段的空间位置、性质及其活动性,由大厂八百户起向东北方向,经过三河齐心庄至北京马坊镇,以可控震源激发方式,完成高分辨率浅层地震勘探测线7条,长约22 km。各地震反射时间剖面波组特征变化明显,断裂特征清晰,获取了准确的断点定位及断裂发育特征,展现了自八百户经齐心庄至马坊镇延伸约20 km范围内夏垫断裂的空间展布及浅部构造特征。结果表明:研究区内夏垫断裂为倾向SE、视倾角约为69°的正断层,结合以往研究成果分析,夏垫断裂属于全新世活动断裂;同时揭示夏垫断裂东北段明显的分段性,齐心庄以北出现一倾向NW的分支断裂。  相似文献   

6.
Klauder wavelet removal before vibroseis deconvolution   总被引:1,自引:0,他引:1  
The spiking deconvolution of a field seismic trace requires that the seismic wavelet on the trace be minimum phase. On a dynamite trace, the component wavelets due to the effects of recording instruments, coupling, attenuation, ghosts, reverberations and other types of multiple reflection are minimum phase. The seismic wavelet is the convolution of the component wavelets. As a result, the seismic wavelet on a dynamite trace is minimum phase and thus can be removed by spiking deconvolution. However, on a correlated vibroseis trace, the seismic wavelet is the convolution of the zero-phase Klauder wavelet with the component minimum-phase wavelets. Thus the seismic wavelet occurring on a correlated vibroseis trace does not meet the minimum-phase requirement necessary for spiking deconvolution, and the final result of deconvolution is less than optimal. Over the years, this problem has been investigated and various methods of correction have been introduced. In essence, the existing methods of vibroseis deconvolution make use of a correction that converts (on the correlated trace) the Klauder wavelet into its minimum-phase counterpart. The seismic wavelet, which is the convolution of the minimum-phase counterpart with the component minimum-phase wavelets, is then removed by spiking deconvolution. This means that spiking deconvolution removes both the constructed minimum-phase Klauder counterpart and the component minimum-phase wavelets. Here, a new method is proposed: instead of being converted to minimum phase, the Klauder wavelet is removed directly. The spiking deconvolution can then proceed unimpeded as in the case of a dynamite record. These results also hold for gap predictive deconvolution because gap deconvolution is a special case of spiking deconvolution in which the deconvolved trace is smoothed by the front part of the minimum-phase wavelet that was removed.  相似文献   

7.
The Yurihara oil and gas field is located on the southern edge of Akita Prefecture, northeastern Japan. In this area, drilling, surface geological surveys and many seismic surveys have been used to investigate the geological structure. Wells drilled into the Nishikurosawa Basalt Group (NBG) of Miocene age found oil and gas reservoirs at depths of 1.5–2 km. Oil and gas are now being produced commercially and further exploration is required in the surrounding areas. However, since the neighbouring areas are covered with young volcanic products from the Chokai volcano, and have a rough topography, the subsurface distribution of the NBG must be investigated using other methods in addition to seismic reflection. According to the well data, the resistivity of the NBG is comparatively higher than that of the overlying sedimentary formations, and therefore the magnetotelluric (MT) method is expected to be useful for the estimation of the distribution of the NBG. An MT survey was conducted along three survey lines in this area. Each line trended east–west, perpendicular to the regional geological strike, and was composed of about 25 measurement sites. Induction vectors evaluated from the magnetic field show that this area has a two-dimensional structure. The evaluated resistivity sections are in agreement with the log data. In conclusion, we were able to detect resistive layers (the NBG) below conductive layers. The results indicate that the NBG becomes gradually less resistive from north to south. In the centre of the northern line, an uplifted resistive area is interpreted as corresponding to the reservoir. By comparison with a seismic section, we prove the effectiveness of the integration of seismic and MT surveys for the investigation of the morphology and internal structure of the NBG. On other survey lines, the resistive uplifted zones are interpreted as possible prospective areas.  相似文献   

8.
大容量气枪震源特征及地震波传播的震相分析   总被引:27,自引:1,他引:26       下载免费PDF全文
利用大容量气枪震源在陆上水库进行地震波激发试验,研究陆上水库环境下激发气枪震源所产生的地震波特征及传播距离. 试验结果表明,大容量气枪震源是具有丰富的10 Hz以下低频信号的低频震源,其激发的地震波具有传播距离远,穿透深度深的特点. 在185 km长的测线上均记录到了气枪信号,成功检测到Pg,Pc,P2,PmP和Pn等多组震相,并在此基础上对地下深地壳结构进行了一维速度结构正演,讨论了该区域壳幔过渡带的低速结构. 气枪震源还具有一般炸药震源不具有的特征,如长期定点重复激发和有效转换S波的优点,是陆上进行长炮检距深穿透地下结构研究的一种优良人工震源.  相似文献   

9.
—The seismic velocity structure of the upper and lower crusts along Hirapur-Mandla pro|fi|le was obtained by 2-D forward modeling of the refraction and wide-angle reflection data. Digitized record sections of the analog data were utilized for delineation of the crustal velocity model across the Vindhyan basin and the Narmada-Son lineament by travel-time modeling and qualitatively matching the amplitudes of synthetic seismograms with seismic record sections. An interface at a depth of 8 km has been traced from wide-angle reflection data of shot points 160 and 235 between Jabalpur and Mandla. The wide-angle reflection phase from crust-mantle boundary is very prominent in all the seismic record sections of shot points 0, 40, 80, 120 and 235. The Moho horizon along the entire study area was continuously traced, depicting an upwarp between Katangi and Jabalpur below the Narmada-Son lineament. The three faults inferred near Narsinghgarh, Katangi and Jabalpur divide the crust into four blocks. The number of faults and displacement patterns along them, depicted along the profile, indicates that block tectonics appear to be active in this region throughout the geological history.  相似文献   

10.
珠江口地区位于南海北部大陆的边缘,具有洋陆过渡型地壳特征,且NE向滨海断裂带从其中穿过,强震风险不可忽视。文中基于2015年珠江口海陆联合三维人工地震探测数据,人工进行初至P波震相拾取,并使用VELEST程序分别反演了陆域和海域的最小一维P波速度模型(走时残差均方根最小)和台站校正结果。台站校正结果的空间分布与区域地形、地质构造和沉积厚度相关较好,正值多分布在珠江三角洲沉积盆地和珠江口盆地内,而负值多分布在花岗岩等基岩出露地区以及滨海断裂带北侧和北部断阶带内的部分隆起地区。新模型对人工地震走时的拟合精度较高,陆域走时残差均方根为0.07s,海域为0.21s。与华南模型相比,新模型对区域地震定位的效果更好,重定位后,陆域的P波地震走时残差降低了22.6%、S波降低了21.2%;海域的P波地震走时残差降低了25.7%、S波降低了15.6%。新模型可为区域地震定位、地震参数和三维成像研究提供参考。  相似文献   

11.
We present high-resolution reflection seismic data from four lines (total 1.9 km) that cross a quick-clay landslide scar located close to the shore of the Göta River in southwest Sweden, and compare the results with geotechnical data from boreholes. The seismic data allow the imaging of bedrock topography and normally to weakly consolidated sediments to a subsurface depth of about 100 m. Different types of seismic sources, including sledgehammer, accelerated weight-drop and dynamite were utilized and compared with each other. Analysis of their power spectra suggests that weight-drop and dynamite have higher frequency content and energy than the sledgehammer, which makes these two sources suitable also for waveform tomography and surface-wave data analysis. The shallowest non-bedrock reflector is observed at about 10–20 m below the surface, it overlays the bedrock, and is interpreted to originate from the contact between clay formations above and a coarse-grained layer below. The coarse-grained layer appears to be spatially linked to the presence of quick-clays. It is a regional scale formation, laterally heterogeneous, which deepens to the west of the study area and correlates well with the available geotechnical data. Continuity of the coarse-grained layer becomes obscured by the landslide scar. There may be a link between the coarse-grained layer and landslides in the study area, although this possibility requires further hydrogeological and geotechnical investigations. Reflectors from the top of the bedrock suggest a depression zone with its deepest point below the landslide scar and a bowl-shaped structure in the northern portion of one of the seismic lines.  相似文献   

12.
Sedimentary rocks beneath the Columbia River Basalt Group are recognized as having potential for oil and gas production, but the overlying layered basalts effectively mask seismic reflections from the underlying sediments. Four electromagnetic (EM) methods have been applied on profiles crossing Boylston Ridge, a typical east–west trending anticline of the Yakima Fold Belt, in an attempt to map the resistivity interface between the basalts and the sediments and to map variations in structure and resistivity within the sediments. The EM surveys detected strong variations in resistivity within the basalts, and in particular the continuous magnetotelluric array profiling (EMAP) revealed resistivity lows beneath the surface anticlines. These low resistivity zones probably coincide with fracturing in the core of the anticlines and they appear to correlate well with similar zones of low seismic velocity observed on a nearby seismic profile. The controlled-source EM surveys (in-loop transient, long-offset transient, and variable-offset frequency-domain) were designed in anticipation of relatively uniform high resistivity basalts, and were found to have been seriously distorted by the intrabasalt conductors discovered in the field. In particular, the resistivity sections derived from 1D inversions were found to be inconsistent and misleading. The EMAP survey provided the most information about the subsurface resistivity distribution, and was certainly the most cost-effective. However, both controlled-source and EMAP surveys call for accurate 2D or 3D inversion to accommodate the geological objectives of this project.  相似文献   

13.
在地震资料采集过程中,表层虚反射界面对地震波的激发效果影响较大,但也是确定炸药震源激发深度的重要因素之一.本文讨论了确定炸药震源距虚反射界面距离的有效方法,分析了复杂地表条件下虚反射界面对地震激发的影响,阐述了如何用之选择最佳激发井深,尽可能地减小由震源产生的各类次生干扰,获得频率响应较好的地震激发子波,以便采集到理想的地震资料.  相似文献   

14.
The Falcón Basin in northwestern Venezuela has a complex geological history driven by the interactions between the South American and Caribbean plates. Igneous intrusive bodies that outcrop along the axis of the basin have been associated with crustal thinning, and gravity modeling has shown evidence for a significantly thinned crust beneath the basin. In this study, crustal scale seismic refraction/wide-angle reflection data derived from onshore/offshore active seismic experiments are interpreted and forward-modeled to generate a P-wave velocity model for a 450 km long profile. The final model shows thinning of the crust beneath the Falcón Basin where depth to Moho decreases to 27 km from a value of 40 km about 100 km to the south. A deeper reflected phase on the offshore section is interpreted to be derived from the downgoing Caribbean slab. Velocity values were converted to density and the resulting gravimetric response was shown to be consistent with the regional gravity anomaly. The crustal thinning proposed here supports a rift origin for the Falcón Basin.  相似文献   

15.
To better image deformation structures within the inner accretionary wedge of the Nankai Trough, Japan, we apply common reflection angle migration to a legacy two-dimensional seismic data set acquired with a 6 km streamer cable. In this region, many seismic surveys have been conducted to study the seismogenic zone related to plate subduction. However, the details of the accreted sediments beneath the Kumano forearc basin are still unclear due to the poor quality of seismic images caused by multiple reflections, highly attenuated signals, and possibly complex geological structures. Generating common image gathers in the subsurface local angle domain rather than the surface offset domain is more advantageous for imaging geological structures that involve complex wave paths and poor illumination. By applying this method, previously unseen structures are revealed in the thick accreted sediments. The newly imaged geometric features of reflectors, such as the folds in the shallow part of the section and the deep reflectors with stepwise discontinuities, imply deformation structures with multiple thrust faults. The reflections within the deep accreted sediments (approximately 5 km) are mainly mapped to far angles (30°–50°) in the common reflection angles, which correspond to the recorded offset distances greater than 4.5 km. This result indicates that the far offset/angle information is critical to image the deformation structures at depth. The new depth image from the common reflection angle migration provides seismic evidence of multiple thrust faults and their relationship with the megathrust fault that is essential for understanding the structure and evolution of the Nankai Trough seismogenic zone.  相似文献   

16.
在新一轮南黄海区域地质地震调查工作中,针对地震地质条件和勘探目标,设计了新的地震资料采集技术方案——上下源延迟激发+长排列接收,获得了强反射界面之下的深部地层有效反射,揭示了千里岩断裂两侧分布着向南逆冲的构造推覆带.结合重力、磁力反演成果认为,千里岩隆起区为扬子块体与华北块体碰撞接触带,扬子块体向北运动与华北块体碰撞后楔入到华北块体之中.  相似文献   

17.
Local site effect microzonation of Lorca town (SE Spain)   总被引:1,自引:0,他引:1  
Local site effect assessment based on subsurface ground conditions is often the key to evaluate urban seismic hazard. The site effect evaluation in Lorca town (south-eastern Spain) started with a classification of urban geology through the geological mapping at scale 1:10,000 and the use of geotechnical data and geophysical surveys. The 17 geological formations identified were classified into 5 geological/seismic formations according to their seismic amplification capacity obtained from ambient vibration measurements as well as from simultaneous strong motion records. The shear-wave velocity structure of each geological/seismic formation was evaluated by means of inversion of Rayleigh wave dispersion data obtained from vertical-component array records of ambient noise. Nakamura’s method was applied to determine a predominant period distribution map. The spectral amplification factors were fourfold the values recorded in a reference hard-rock site. Finally, the capability of this study for explaining the damage distribution caused by the May 11th, 2011 Lorca destructive earthquake (Mw \(=\) 5.2) was examined. The methods used in this work are of assistance to evaluate ground amplification phenomena in urban areas of complex geology as Lorca town due to future earthquakes with applicability on urban seismic risk management.  相似文献   

18.
Seismic reflection data were acquired across volcanic hosted massive sulfides (VHMS) of Vihanti in order to improve the understanding of the regional geological setting. Commercially processed seismic data from Vihanti are of good quality, but reprocessing can be used to extract additional information about geological structures. Especially, careful velocity analysis influences the quality of seismic images. Differentiating reflections caused by fractures from those caused by lithological contacts is very important for exploration and geological modeling. Reflections from fracture zones known from drilling stack with lower velocity (~ 5100 m/s) compared to typical stacking velocities of the Vihanti area (> 5500 m/s). The reprocessing also indicated that fracture zones are better imaged with low frequencies due to the better overall continuity of the fault zones at scales of hundreds of meters rather than at shorter seismic wavelengths.In full stacks, long offset data can mask structure close to the surface. More detailed seismic images of the shallow subsurface emerged by preferentially stacking short offset data wherever acquisition and processing lines lay close together and were nearly straight. Long offset data remains valuable for imaging deeper structures as well as dipping reflectors. Cross-dip-analysis revealed a bright diffractor located near the base of the Vihanti volcanic basin at 1.5 km depth. The seismic data allow a geological interpretation in which the Vihanti structure has developed through significant thrust faulting and displacement of the lithological contacts. Gentle folds that were formed prior to faulting are visible as undulating reflectivity in seismic sections. The reprocessed seismic section indicates a potential deep extension of the ore-hosting altered volcanic and calc-silicate rocks previously unexplored.  相似文献   

19.
已有活动构造研究结果表明,天山北缘具有典型的大陆内部活动构造特征,表现为多排平行山体的背斜和逆断裂.为了研究乌鲁木齐坳陷区的地壳细结构、主要断裂展布和深、浅构造关系,2004年底,在乌鲁木齐西部的天山与准噶尔盆地之间的过渡带上,完成了一条近SN向的长度为78 km的深地震反射探测剖面.结果表明,该区地壳以双程走时9~10.5 s左右的强反射带为界分为上地壳和下地壳,上地壳厚约26~28 km,下地壳厚约23~25 km.双程走时5 s以上,反射层位丰富,构造形态清晰,且在剖面横向上具有明显不同的构造特征;在西山以南的区域,为一系列近东西向展布、南北向排列的逆冲背斜构造和一组自南向北逆冲的断裂,它们在深部均受到滑脱带的控制;在西山和王家沟一带,为一套向北陡倾的反射层系和一组沿层间滑动的断裂;剖面北部显示出了典型的沉积盆地图像,沉积盆地最深处约为10~12 km.双程走时6~9 s之间,为一些延续长度较短、反射能量较弱、且无规律可寻的凌乱反射,表明这部分地壳结构具有明显的“反射透明”性.Moho过渡带出现的时间位于双程走时14~17 s,对应壳幔过渡带厚度约为9~10 km.本区Moho面自北向南逐渐加深,剖面北部其深度约为50~52 km,在靠近北天山附近,其深度约为54~55 km.在剖面中部的西山附近,上、下地壳分界面反射和Moho过渡带反射变得模糊,且浅部地层还出现隆起和褶皱,推测与准噶尔盆地和天山的挤压过程有关.  相似文献   

20.
Large-offset approximation to seismic reflection traveltimes   总被引:4,自引:0,他引:4  
Conventional approximations of reflection traveltimes assume a small offset-to-depth ratio, and their accuracy decreases with increasing offset-to-depth ratio. Hence, they are not suitable for velocity analysis and stacking of long-offset reflection seismic data. Assuming that the offset is large, rather than small, we present a new traveltime approximation which is exact at infinite offset and has a decreasing accuracy with decreasing offset-to-depth ratio. This approximation has the form of a series containing powers of the offset from 1 to −∞. It is particularly accurate in the presence of a thin high-velocity layer above the reflector, i.e. in a situation where the accuracy of the Taner and Koehler series is poor. This new series can be used to gain insight into the velocity information contained in reflection traveltimes at large offsets, and possibly to improve velocity analysis and stacking of long-offset reflection seismic data.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号