共查询到20条相似文献，搜索用时 46 毫秒
1.
各向异性射线理论基础上的局部角度域叠前深度偏移方法能够为深度域构造成像与基于角道集的层析反演提供有力支撑,但是对于复杂地质构造而言,高斯度叠前深度偏移在不失高效、灵活等特点的情况下,具有明显的精度优势.为此,本文研究局部角度域理论框架下的高斯束叠前深度偏移方法.为提高算法效率与实用性,文中讨论了一种从经典弹性参数表征的各向异性介质运动学和动力学射线方程演变而来的由相速度表征的简便形式,并提出了一种比较经济的各向异性高斯束近似合成方案.结合地震波局部角度域成像原理,讨论一种适合高斯束偏移的角度参数计算方法.国际上通用的理论模型合成数据试验表明：相比局部角度域Kirchhoff叠前深度偏移成像方法,本文方法具有更高的成像精度与抗噪能力,既适用于复杂构造成像,也可为TI介质深度域偏移速度分析与模型建立提供高效的偏移引擎. 相似文献
2.
转换波偏移可以利用纵横波波场信息，得到高分辨率的成像结果，从而为油藏描述提供高质量的地震资料.目前的研究主要是利用纵波波场信息进行偏移成像，然而，传统的纵波方法在复杂探区成像时具有一定的局限性.为此，本文在各向异性介质声波射线追踪算法的基础上，推导出各向异性介质转换波射线追踪方程，发展了一种转换波射线追踪算法；并将研究的追踪算法应用到偏移成像中，提出了一种各向异性VTI介质角度域转换波高斯束偏移成像方法.通过各向异性VTI介质断块模型和复杂构造模型试算，说明了本文方法的正确性和有效性.模型试算的结果表明，在考虑地下各向异性时，本文研究的方法具有更好的成像效果，提取的角道集结果可以为偏移速度分析提供依据. 相似文献
3.
高斯束逆时偏移是一种兼具计算效率和成像精度的深度域成像方法,能够面向目标成像.地下介质中黏滞性普遍存在,利用传统各向同性或完全弹性的成像方法处理黏滞性探区的数据会降低分辨率,并导致成像位置不准确和振幅欠估计等问题.本文在高斯束逆时偏移的基础上,通过对震源点和检波点处的波场进行衰减补偿,并结合高斯束求解时的角度信息,实现了黏声介质角度域高斯束逆时偏移方法.最后通过模型和实际资料试算对本文方法的正确性和适用性进行了验证.试算结果表明:相比于声波高斯束逆时偏移,本文方法能够对黏滞性引起的吸收衰减进行有效补偿,同时提取的角度域共成像点道集(ADCIGs)不仅可以用于分角度叠加成像压制成像噪声,而且能够为后续的偏移速度分析提供支撑. 相似文献
4.
研究与实践表明,对于长偏移距、宽方位地震数据,忽略各向异性会明显降低成像质量,影响储层预测与描述的精度.针对典型的横向各向同性(TI)介质,本文面向深度域构造成像与偏移速度分析的需要,研究基于射线理论的局部角度域叠前深度偏移成像方法.它除了像传统Kirchhoff叠前深度偏移那样输出成像剖面和炮检距域的共成像点道集,还遵循地震波在成像点处的局部方向特征、基于扩展的脉冲响应叠加原理获得入射角度域和照明角度域的成像结果.为了方便快捷地实现TI介质射线走时与局部角度信息的计算,文中讨论和对比了两种改进的射线追踪方法:一种采用从经典各向异性介质射线方程演变而来的由相速度表征的简便形式;另一种采用由对称轴垂直的TI(即VTI)介质声学近似qP波波动方程推导出来的射线方程.文中通过坐标旋转将其扩展到了对称轴倾斜的TI(即TTI)介质.国际上通用的理论模型合成数据偏移试验表明,本文方法既适用于复杂构造成像,又可为TI介质深度域偏移速度分析与模型建立提供高效的偏移引擎. 相似文献
5.
We present a Gaussian packet migration method based on Gabor frame decomposition and asymptotic propagation of Gaussian packets. A Gaussian packet has both Gaussian‐shaped time–frequency localization and space–direction localization. Its evolution can be obtained by ray tracing and dynamic ray tracing. In this paper, we first briefly review the concept of Gaussian packets. After discussing how initial parameters affect the shape of a Gaussian packet, we then propose two Gabor‐frame‐based Gaussian packet decomposition methods that can sparsely and accurately represent seismic data. One method is the dreamlet–Gaussian packet method. Dreamlets are physical wavelets defined on an observation plane and can represent seismic data efficiently in the local time–frequency space–wavenumber domain. After decomposition, dreamlet coefficients can be easily converted to the corresponding Gaussian packet coefficients. The other method is the Gabor‐frame Gaussian beam method. In this method, a local slant stack, which is widely used in Gaussian beam migration, is combined with the Gabor frame decomposition to obtain uniform sampled horizontal slowness for each local frequency. Based on these decomposition methods, we derive a poststack depth migration method through the summation of the backpropagated Gaussian packets and the application of the imaging condition. To demonstrate the Gaussian packet evolution and migration/imaging in complex models, we show several numerical examples. We first use the evolution of a single Gaussian packet in media with different complexities to show the accuracy of Gaussian packet propagation. Then we test the point source responses in smoothed varying velocity models to show the accuracy of Gaussian packet summation. Finally, using poststack synthetic data sets of a four‐layer model and the two‐dimensional SEG/EAGE model, we demonstrate the validity and accuracy of the migration method. Compared with the more accurate but more time‐consuming one‐way wave‐equation‐based migration, such as beamlet migration, the Gaussian packet method proposed in this paper can correctly image the major structures of the complex model, especially in subsalt areas, with much higher efficiency. This shows the application potential of Gaussian packet migration in complicated areas. 相似文献
6.
地下介质中普遍存在着各向异性,当前基于各向异性的地震波射线追踪多是在弱各向异性介质中进行且采用群速度近似表示方法,这些近似方法在强各项异性介质中会导致很大误差而无法真正模拟地震波的传播规律。根据地下普遍存在各向异性的事实和地震波基本传播规律,提出利用牛顿迭代法高效求解群速度,基于Paraview平台自动化构建三维地质模型,采用最短路径法进行地震波射线追踪模拟及可视化,实现对复杂三维地质的速度不均匀性和各向异性的表达,为三维地质模型的构建和地震波射线追踪模拟及可视化提供一种新思路,并以华北克拉通山西断陷带北部局部区域为例进行研究。结果表明,该方法能够减少由各向异性对地震波传播模拟造成的影响,清晰表达了研究区地质结构和各向异性特点,在对复杂三维地质结构的解读中能够较好应用。 相似文献
7.
Anisotropic reverse-time migration for tilted TI media 总被引：1，自引：0，他引：1
Seismic anisotropy in dipping shales results in imaging and positioning problems for underlying structures. We develop an anisotropic reverse‐time depth migration approach for P‐wave and SV‐wave seismic data in transversely isotropic (TI) media with a tilted axis of symmetry normal to bedding. Based on an accurate phase velocity formula and dispersion relationships for weak anisotropy, we derive the wave equation for P‐wave and SV‐wave propagation in tilted transversely isotropic (TTI) media. The accuracy of the P‐wave equation and the SV‐wave equation is analyzed and compared with other acoustic wave equations for TTI media. Using this analysis and the pseudo‐spectral method, we apply reverse‐time migration to numerical and physical‐model data. According to the comparison between the isotropic and anisotropic migration results, the anisotropic reverse‐time depth migration offers significant improvements in positioning and reflector continuity over those obtained using isotropic algorithms. 相似文献
8.
在许多地震反演和偏移成像方法中,都要涉及到射线路径和旅行时的计算.本文将波前面三角形网格剖分和三维波前重建法射线追踪技术结合使用,实现了射线路径和旅行时的准确快速计算.三维波前重建法射线追踪过程中可以保证稳定合理的射线密度,克服了常规射线追踪方法存在阴影区的问题.波前面三角形网格剖分在描述和拆分波前面时更加准确有效,而且不需太多的网格数目,从而提高了射线追踪的精度和效率.该方法在三维复杂构造成像方面有独特的优势,目前在实际的Kirchhoff 偏移中的已经有相关应用. 相似文献
9.
近年来,油气勘探的重心正转向具有复杂地表和复杂地质体的双复杂区域.本文发展了一种精确的双复杂条件下基于地表倾角信息的非倾斜叠加束偏移方法,相对于传统束成像方法无需进行三方面处理:(1)高程静校正;(2)相位校正;(3)束中心与接收点之间关于速度和束出射角的近似替换,因而具有更高的成像精度.通过加拿大逆掩断层模型、中原油田断层模型及实际资料的偏移试算,并与传统束偏移及波动方程偏移成像结果对比可知:本文非近似束偏移方法在近地表、高陡倾等构造处的成像精度、反射界面成像振幅等方面优于传统的偏移方法,以此验证了本文非倾斜叠加精确束偏移方法的正确性、优越性及适应性. 相似文献
10.
基于单程波深度延拓方法,发展了一种地震波入射角度计算方法.入射角度的计算仅利用简谐波场,可得到整个成像区域内所有点的入射波波前面方向.该方法具有较高的计算效率,可服务于合成角道集等深度偏移方法;与偏移算法相比,其计算量几乎可以忽略.与射线法或基于走时梯度的入射角度计算方法相比,本文方法更稳健,避免了速度场的微小变化导致的入射角较大变化,因此更适用于实际偏移速度模型,也与波动方程深度偏移方法更匹配.数值算例表明,本文方法既有较高的计算效率又有很好的精度,且有很好的稳定性. 相似文献
11.
Prestack depth migration of multicomponent seismic data improves the imaging accuracy of subsurface complex geological structures. An accurate velocity field is critical to accurate imaging. Gaussian beam migration was used to perform multicomponent migration velocity analysis of PP- and PS-waves. First, PP- and PS-wave Gaussian beam prestack depth migration algorithms that operate on common-offset gathers are presented to extract offset-domain common-image gathers of PP- and PS-waves. Second, based on the residual moveout equation, the migration velocity fields of P- and S-waves are updated. Depth matching is used to ensure that the depth of the target layers in the PP- and PS-wave migration profiles are consistent, and high-precision P- and S-wave velocities are obtained. Finally, synthetic and field seismic data suggest that the method can be used effectively in multiwave migration velocity analysis. 相似文献
12.
复杂介质中地震波前及射线追踪综述 总被引：1，自引：0，他引：1
本文较为系统综述了国内外在不均匀介质中各种主要和实用的射线追踪方法,例如:基于射线理论的打靶法、弯曲法(伪弯曲法)、高斯射线束算法等;基于网格单元扩展的有限差分解程函方程法(FD)、最短路径算法(SPM);以及结合射线和网格单元扩展的波前构造法等.同时对目前出现的多次波射线追踪技术、以及多值波前追踪技术(如:相空间算法、水平集算法)也进行了分析讨论.同时对基于网格单元扩展算法的优缺点进行了评述,其基本结论是:基于单元模型的SPM要优于FD算法,而基于网格的SPM算法则次之.就传统的射线追踪算法(如:打靶法和弯曲法)而言,其未来的发展方向是实现完全非线性的相应算法,而基于网格单元的算法则主要是扩展功能(如:后续波、多值波前的追踪).射线追踪方法技术未来需要解决的问题主要有:块状模型中多次波的追踪;多值波前及多值射线追踪;走时与振幅的同时追踪计算;以及其它领域新方法的引入. 相似文献
13.
为更好地适应复杂构造的地震偏移成像，本文提出了一套快速射线追踪算法和一种高精度的走时外插计算方法.采用线性多步法的预测-校正公式求解射线追踪方程组，与传统的四阶Runge-Kutta法相比，提高了计算效率.在网格节点上的走时计算中，应用一种基于圆台的外插方法，该方法以射线的方向为轴确定圆台，将轴上的走时外插到圆台内的网格节点上.与传统的矩形体外插方法相比，圆台走时外插方法提高了计算精度，且具有更好的稳定性.另外，该方法利用稀疏分布的射线即可获得高精度的走时表，节省计算量，对复杂构造的偏移成像非常有利，尤其是三维偏移.最后通过逆散射偏移成像算例，验证了算法的有效性和适用性. 相似文献
14.
地震各向异性集中表现为速度各向异性,势必影响地震波运动学特征.传统声波逆时偏移(RTM)和最小二乘逆时偏移(LSRTM)没有考虑介质各向异性特征,导致反射波不能正确归位、同相轴出现扭曲及寻优速度慢或不收敛等,VTI介质逆时偏移(VTI-RTM)矫正了声波成像的不足,但仍存在低频干扰严重、中深部成像不佳、振幅保持差等缺陷.为此,本文首先实现了VTI介质最小二乘逆时偏移(VTI-LSRTM)方法,为了节省I/O及内存需求并提高效率,进一步引入平面波编码技术,提出了一种基于平面波加速的VTI介质最小二乘逆时偏移(VTI-PLSRTM)策略.在此基础上开展了简单模型及复杂Marmousi模型成像试验,并与标准逆时偏移剖面对比表明:本方法能够校正各向异性造成的相位畸变,且在迭代中自动压制串扰及低频噪声、补偿中深部能量,是一种兼具质量与效率的保幅成像策略;对速度误差的敏感性测试说明该方法需要相对正确的偏移速度及Thomsen参数模型. 相似文献
15.
Estimation of Thomsen＇s anisotropic parameters is very important for accuratetime-to-depth conversion and depth migration data processing. Compared with othermethods, it is much easier and more reliable to estimate anisotropic parameters that arerequired for surface seismic depth imaging from vertical seismic profile （VSP） data, becausethe first arrivals of VSP data can be picked with much higher accuracy. In this study, wedeveloped a method for estimating Thomsen＇s P-wave anisotropic parameters in VTImedia using the first arrivals from walkaway VSP data. Model first-arrival travel times arecalculated on the basis of the near-offset normal moveout correction velocity in VTI mediaand ray tracing using Thomsen＇s P-wave velocity approximation. Then, the anisotropicparameters 0 and e are determined by minimizing the difference between the calculatedand observed travel times for the near and far offsets. Numerical forward modeling, usingthe proposed method indicates that errors between the estimated and measured anisotropicparameters are small. Using field data from an eight-azimuth walkaway VSP in TarimBasin, we estimated the parameters 0 and e and built an anisotropic depth-velocity modelfor prestack depth migration processing of surface 3D seismic data. The results showimprovement in imaging the carbonate reservoirs and minimizing the depth errors of thegeological targets. 相似文献
16.
叠前逆时偏移是目前成像精度最高的地震偏移方法之一,其实现过程中的一个重要步骤是数值求解全波方程,所以快速有效求解全波方程的数值算法对逆时偏移至关重要. 四阶近似解析辛可分Runge-Kutta (NSPRK) 方法是近年发展的一种具有高效率、高精度的数值求解波动方程的保辛差分方法, 能在粗网格条件下有效压制数值频散, 从而提高计算效率, 节省计算机内存需求量. 本文利用四阶NSPRK方法构造的基本思想,发展了具有六阶空间精度的NSPRK方法,并对新的六阶NSPRK方法进行了详细的稳定性和数值频散分析,以及计算效率比较和波场模拟. 同时将该方法用于声波叠前逆时偏移中, 得到一种时间上保辛、空间具有六阶精度、低数值频散、可应用大步长进行波场延拓并能长时计算的叠前逆时偏移方法,对Sigsbee2B模型进行了偏移成像, 并和四阶NSPRK方法、传统的六阶差分方法、四阶Lax-Wendroff correction (LWC) 方法进行了对比. 数值结果表明, 基于六阶NSPRK方法的叠前逆时偏移能得到更好的成像结果, 是一种优于四阶NSPRK方法、传统的六阶差分方法、四阶LWC叠前逆时偏移的方法, 尤其是在粗网格情况下具有更明显的优越性. 相似文献
17.
In downhole microseismic monitoring, accurate event location relies on the accuracy of the velocity model. The model can be estimated along with event locations. Anisotropic models are important to get accurate event locations. Taking anisotropy into account makes it possible to use additional data – two S-wave arrivals generated due to shear-wave splitting. However, anisotropic ray tracing requires iterative procedures for computing group velocities, which may become unstable around caustics. As a result, anisotropic kinematic inversion may become time consuming. In this paper, we explore the idea of using simplified ray tracing to locate events and estimate medium parameters. In the simplified ray-tracing algorithm, the group velocity is assumed to be equal to phase velocity in both magnitude and direction. This assumption makes the ray-tracing algorithm five times faster compared to ray tracing based on exact equations. We present a set of tests showing that given perforation-shot data, one can use inversion based on simplified ray-tracing even for moderate-to-strong anisotropic models. When there are no perforation shots, event-location errors may become too large for moderately anisotropic media. 相似文献
18.
Common‐shot Fresnel beam migration based on wave‐field approximation in effective vicinity under complex topographic conditions 
下载免费PDF全文
下载免费PDF全文 Gaussian beam migration is a versatile imaging method for geologically complex land areas, which overcomes the limitation of Kirchhoff migration in imaging multiple arrivals and has no steep‐dip limits of one‐way wave‐equation migration. However, its imaging accuracy depends on the geometry of Gaussian beam that is determined by the initial parameter of dynamic ray tracing. As a result, its applications in exploration areas with strong variations in topography and near‐surface velocity are limited. Combined with the concept of Fresnel zone and the theory of wave‐field approximation in effective vicinity, we present a more robust common‐shot Fresnel beam imaging method for complex topographic land areas in this paper. Compared with the conventional Gaussian beam migration for irregular topography, our method improves the beam geometry by limiting its effective half‐width with Fresnel zone radius. Moreover, through a quadratic travel‐time correction and an amplitude correction that is based on the wave‐field approximation in effective vicinity, it gives an accurate method for plane‐wave decomposition at complex topography, which produces good imaging results in both shallow and deep zones. Trials of two typical models and its application in field data demonstrated the validity and robustness of our method. 相似文献
19.
反射地震勘探中的偏移成像技术是获取地下介质构造形态最有效的手段之一.在叠前深度域偏移方法中,目前工业界采用的方法包括基于射线理论的波动方程积分解法和基于波动理论的微分波动方程单程波解法,这两类方法难以处理地震波横向速度变化剧烈的高陡倾角构造成像问题.近年来勘探地震学研究领域发展起来的叠前逆时偏移采用了双程波求解微分波动方程的算法,这种方法具有相位准确、不受介质横向速度变化和高陡倾角构造的影响、成像精度高、可以利用回转波正确成像等优点,从理论上弥补了当前工业界常规地震偏移所面临的成像缺陷.然而,叠前逆时偏移成像方法从理论走向实用尚需解决如下问题:计算速度和数据存储空间的节省、初始速度模型的建立、震源子波的选择、数值模型边界条件的定义和假像的消除等等.对于计算速度和存储量大的问题,随着计算机硬件的快速发展,将会不断得到改善,同时可以采取一些计算技术和存储策略来加以缓解.本文主要针对初始速度模型的建立、震源子波的选择、数值模型边界条件的定义和假像的消除这些因素,利用简单模型进行了分析.对于反射波造成的传播路径上的假像,给出了一种振幅补偿滤波方法.对勘探地球物理学界给出的SEG/EAGE二维盐丘模型、Marmousi模型和本研究设计的崎岖海底模型进行了叠前逆时偏移成像,均取得了较好的成像效果. 相似文献
20.
The paper outlines the most important results of the paraxial complex geometrical optics (CGO) in respect to Gaussian beams
diffraction in the smooth inhomogeneous media and discusses interrelations between CGO and other asymptotic methods, which
reduce the problem of Gaussian beam diffraction to the solution of ordinary differential equations, namely: (i) Babich’s method,
which deals with the abridged parabolic equation and describes diffraction of the Gaussian beams; (ii) complex form of the
dynamic ray tracing method, which generalizes paraxial ray approximation on Gaussian beams and (iii) paraxial WKB approximation
by Pereverzev, which gives the results, quite close to those of Babich’s method. For Gaussian beams all the methods under
consideration lead to the similar ordinary differential equations, which are complex-valued nonlinear Riccati equation and
related system of complex-valued linear equations of paraxial ray approximation. It is pointed out that Babich’s method provides
diffraction substantiation both for the paraxial CGO and for complex-valued dynamic ray tracing method. It is emphasized also
that the latter two methods are conceptually equivalent to each other, operate with the equivalent equations and in fact are
twins, though they differ by names.
The paper illustrates abilities of the paraxial CGO method by two available analytical solutions: Gaussian beam diffraction
in the homogeneous and in the lens-like media, and by the numerical example: Gaussian beam reflection from a plane-layered
medium. 相似文献