共查询到17条相似文献，搜索用时 140 毫秒
1.
断层岩,尤其是断层泥的磁性异常近年来被研究人员广泛关注,但关于其磁性异常的形成原因尚没有统一的解释．海原断裂是青藏高原东北缘一条重要的走滑断裂,前期研究发现海原断裂带景泰段出露有数十米至上百米的断层岩,是理想的研究材料．本研究选取海原断裂带景泰段老虎山山前一个断层岩剖面作为研究对象,拟通过测量断层岩的磁化率（χ）、非磁滞剩磁（ARM）、饱和等温剩磁（SIRM）、等温剩磁（IRM）以及磁化率随温度变化曲线（χ-T曲线）等磁学参数并结合粒度、碳含量、X射线衍射（XRD）等分析方法来探究海原断裂带老虎山段不同颜色断层岩的磁性特征及其形成机制．磁学研究显示黑色、红色及杂色断层泥相较于围岩和破碎带显示了低磁性,尤其是黑色断层泥,其磁化率值均小于10×10~(-8 )m~3·kg~(-1)．碳含量及矿物相分析结果指示黑色断层泥与断裂带附近石炭系煤层具有相似的矿物相组成,结合相似的χ-T曲线推断石炭系煤层为黑色断层泥的母岩．石炭系煤层经断层活动卷入断层,在断层强烈剪切摩擦作用下不断细化,形成伊利石等黏土矿物,并促使一部分顺磁性含铁硅酸盐矿物或其他含铁矿物发生化学变化形成亚铁磁性矿物,使得黑色断层泥的磁化率较其母岩石炭系煤层有一定升高．通过黑色断层泥的铁磁性磁化率结合χ-T曲线计算获得断层泥所经历的最高温度约为420℃,不超过450℃．老虎山段厚层碳质断层泥的存在为该地区发现的浅层蠕滑现象提供了一种解释． 相似文献
2.
断裂带物质组成、结构及其物理性质是理解断裂变形机制和地震破裂过程的基础和关键,断裂带地震（黏滑）和非地震（蠕滑）滑移行为不仅对了解地震活动性和山脉隆升过程具有重要意义,而且直接为防震减灾提供科学依据.我们以穿过龙门山映秀—北川和灌县—安县断裂带的汶川地震断裂带科学钻探（WFSD）岩心和地表出露的断裂带为研究对象,通过对断裂岩组成、结构、显微构造和钻孔物性测井数据进行分析研究,确定了龙门山逆冲断裂带滑移行为和物性特征,初步探讨了大地震活动性和有关断裂带的隆升作用：（1）映秀—北川断裂带倾向NW,浅部倾角~65°,发育的断裂岩厚约180~280 m,由碎裂岩、假玄武玻璃（地震化石）、断层泥和断层角砾岩组成.断裂带具有高自然伽马、高磁化率值、低电阻率、低波速等物理性质以及对称型破碎结构.断层泥普遍具有摩擦热效应的高磁化率值和石墨化作用特征,是古地震滑动的岩石记录.表明映秀—北川断裂带为经常发生大地震的断裂带,晚新生代以来类似汶川地震的大地震复发周期小于6000—10000年,具有千年复发周期特征.（2）灌县—安县断裂带倾向NW,浅部倾角~38°,发育的断裂岩厚约40~50 m,仅由断层泥和断层角砾岩组成,具有典型的"压溶"结构,表现出蠕滑性质.除压溶作用外,定向富集的层状黏土矿物和微孔隙的发育使断层强度变弱.断裂带具上盘破碎的非对称型破碎结构,除具低磁化率值特征外,其他物性与映秀—北川断裂带一致.（3）根据断裂岩厚度与断层滑移量相关经验公式关系,以及断层产状,粗略估算映秀—北川断裂带自中生代以来累积垂直位移量大于9 km,灌县—安县断裂带累积垂直位移量小于3 km.映秀—北川断裂带长期大地震产生的累积垂直位移量是龙门山隆升的主要贡献. 相似文献
3.
岩石磁化率特征可以帮助判断岩石的形成环境,对地震过程中滑动摩擦伴随高温的物理-化学变化具有显著反应.本研究以钻穿龙门山中段构造带的汶川地震断裂科学钻探2号孔(WFSD-2)岩心为研究对象,使用Bartington MS2K磁化率仪对500~2283.56 m深度的岩心进行高分辨率无损磁化率测试,并结合岩性特征和显微结构探讨了龙门山构造带主要岩石单元的磁化率特征及其地震断裂活动的磁学响应.磁化率测试结果表明,由花岗岩和火山碎屑岩组成的彭灌杂岩体的磁化率值(数十到数千个10~(-6)SI)普遍高于上三叠统须家河组沉积岩的磁化率值(数个到数十个10~(-6)SI).从WFSD-2岩性分布来看,彭灌杂岩上下出露四段,其磁化率值特征反映它们属于不同的岩石单元,它们与下伏须家河组地层呈断层接触,构成叠瓦状构造,指示了龙门山构造带具有强烈的地壳缩短作用.断裂带中处于滑动带的断层泥和假玄武玻璃具有高磁化率特征,而断层角砾岩和碎裂岩不具有高磁化率值特征,表明断层岩磁化率增高的原因可能主要与地震断裂滑动摩擦过程中高温作用下发生的磁性矿物转换有关,断层岩中高磁化率异常可作为大地震活动的证据.WFSD-2岩心中的映秀—北川断裂带(600~960 m)可识别出约80条高磁化率异常的断层岩带,揭示映秀—北川断裂带是一条长期活动的断裂带,龙门山构造带形成演化过程中伴随着大地震活动. 相似文献
4.
地震断裂带的孕震环境对于研究地震的发生至关重要.本文以汶川地震断裂带科学钻探2号（WFSD-2）钻孔岩心中的假玄武玻璃、碎裂岩及其围岩为研究对象,通过岩石磁学测试,并结合显微结构观察探讨龙门山断裂带大地震的孕震环境.WFSD-2岩心碎裂岩中的假玄武玻璃是龙门山断裂带曾经发生过大地震活动的岩石学证据,假玄武玻璃具有高磁化率特征,而碎裂岩的磁化率值与围岩相似,假玄武玻璃中的新生磁铁矿是其高磁化率值异常的重要原因之一.假玄武玻璃中较少量的新生磁铁矿暗示了假玄武玻璃的生成环境为含氧量较低的高温还原环境.大地震断裂的摩擦热是改变龙门山断裂带中假玄武玻璃岩石磁学特征的主导因素,流体作用较弱.无高磁化率异常的碎裂岩经历的温度小于300℃,推测假玄武玻璃的生成深度较深.WFSD-2岩心中20余层假玄武玻璃脉体证明映秀—北川断裂带是一条长期活跃的断裂带,龙门山断裂带上曾经发生了多次大地震断裂活动,这些大地震可能发生在深度较大、流体作用较弱的还原性孕震环境中. 相似文献
5.
珠江三角洲沉积物的岩石磁学性质及其环境意义 总被引：1，自引：0，他引：1
选取珠江三角洲区域位于广州番禺的PD钻孔进行沉积物岩石磁学和环境磁学记录的研究. 岩石磁学实验表明钻孔大部分沉积物以低矫顽力的磁铁矿类矿物为主要控磁矿物, 但仍存在少量铁硫化物. 在有机质丰富的灰黑色黏土沉积中, 铁硫化物含量增加, 成为影响沉积物磁性特征的主要矿物, 标志着海退后富含有机质而缺氧的沼泽环境. 以赤铁矿和针铁矿类矿物为主要控磁矿物的花斑黏土, 表明了一个较长时期的暴露风化过程, 代表着沉积间断. 在以磁铁矿类矿物作为主要载磁矿物的沉积物中, 磁铁矿浓度及粒度的变化主导磁化率(κ)、饱和等温剩磁(SIRM)等环境磁学参数的变化, SIRM/κ 和χarm/SIRM的大小旋回响应于海平面的升-降过程, 它们的高值反映了磁性矿物粒度变细、海平面上升. 在沉积学分析的基础上, 根据环境磁学参数截然不同的变化规律, 结合微体古生物数据, 将珠江三角洲沉积物代表的环境分为两次显著的海平面上升－下降旋回, 晚更新世和全新世的海侵又包含若干个比较明显的次级海平面波动过程. 相似文献
6.
文中总结了基岩断层带黏滑与蠕滑的地质标志与岩石力学实验证据,分析了控制黏滑与蠕滑的物理机制。断层带内的矿物组成、矿物变形机制、流体作用和断层带变形方式等是控制黏滑与蠕滑的主要因素。富含黏土矿物的断层泥具有速度强化型摩擦滑动,控制着断层蠕滑,而以方解石、石英、长石及辉石等造岩矿物为主的断层泥在大陆浅源地震的震源深度条件下具备黏滑条件。脆性破裂伴随的扩容过程是断层黏滑的必要条件,而压实、碎裂和塑性剪切变形形成的叶理和小褶皱对应于蠕滑。在流体作用下,压溶使孔隙和微裂隙愈合,有利于断层强度的恢复和断层闭锁,既是断层发生不稳定滑动的根源,也是断层带局部存在高压流体的条件,而在流体作用下的退变质反应与水解反应生成黏土矿物和层状及环状硅酸盐矿物,不仅降低了断层带的强度,还导致断层向蠕滑转变。断层带内均匀分布多个剪切面和较宽的变形带对应于蠕滑,局部化的R剪切及Y剪切、窄变形带和摩擦镜面对应于黏滑。 相似文献
7.
5.12汶川地震同震地表破裂带在虹口八角-深溪沟一带主要出露于三叠系须家河组的炭质泥岩中,同震断层泥在颜色、结构上与老断层泥和围岩类似。通过开挖探槽,系统采样,采用粉晶X射线衍射定量分析方法,研究了同震地表破裂带的围岩、断层角砾岩、老断层泥和新断层泥的矿物成分特征。同震断层泥的主要成分为石英和黏土矿物,含微量长石和白云石;断层泥的显著特征为高黏土矿物含量,从同震断层泥、老断层泥、角砾岩到围岩黏土矿物含量依次降低,黏土矿物以伊利石和伊蒙混层为主,含微量绿泥石和高岭石,矿物组成明显比地表破裂带北段同震断层泥简单。不同颜色的同震断层泥成分略有不同,黑色断层泥中伊利石含量明显高于白色断层泥;老断层泥中含有方解石和白云石,而同震断层泥不含方解石,只含微量白云石。同震断层泥中伊蒙混层高含量表明,在本次地震错动中有富含K的流体参与。 相似文献
8.
新疆黄土-古土壤序列环境磁学参数的变化机理及其气候意义仍存在争议.本文选择天山北麓的中梁黄土剖面,系统开展了低温和常温下环境磁学参数的测试与研究,测量包括室温的磁化率与饱和磁化强度,以及磁化率与饱和剩余磁化强度的低温变化.结果发现,该剖面黄土和古土壤样品的磁性矿物主要由磁铁矿与磁赤铁矿组成,不含任何粒级成壤形成的超顺磁矿物颗粒,其磁化率信号主要记录了粉尘磁性矿物含量变化,较高的磁化率指示较强的风动力状况或者较近的风尘源区,新疆黄土的这种环境磁学"风尘输入模式"可用来重建干旱区的风动力强弱变化. 相似文献
9.
昌马断裂带断层岩研究及其粘滑,蠕滑特征 总被引：2，自引：0，他引：2
在对断层岩的分布、内部结构、宏观变形及断层泥中石英颗粒形态、表面特征研究分析的基础上，讨论了昌马断裂带粘滑、蠕滑特征。同时指出，昌马断裂带虽以粘滑运动为主，但仍伴有一定量的蠕滑活动。 相似文献
10.
通过中国东部红土剖面的环境磁学参数（磁化率、频率磁化率、非磁滞剩磁、饱和等温剩磁等）测量,获得了红土剖面磁性矿物浓度、粒度和类型等特性随深度的变化曲线以及红土经连二亚硫酸钠一柠檬酸钠一重碳酸钠溶液（ＤＣＢ）处理后的磁性参数变化．根据红土剖面环境磁学参数及其磁参数比值的变化可将红土分为３个层段,各层段的磁性矿物特征存在明显的差异．证实了红土剖面中的磁性载体主要是磁赤铁矿、赤铁矿和针铁矿,并分离出了球粒状磁颗粒．认为红土磁性矿物的数量、粒度、类型等的变异指示了其形成时的环境特征,其频率磁化率和ＤＣＢ处理的磁化率损失量指示了红土成壤化作用的强弱,可作为在红壤区研究过去全球变化的一种新途径． 相似文献
11.
Hidemi Tanaka Shin-Ichiro Hinoki Kazuo Kosaka Aiming Lin Keiji Takemura Akihiro Murata Takao Miyata 《Island Arc》2001,10(3-4):381-391
Abstract This paper describes the results of petrographical and meso- to microstructural observations of brittle fault rocks in cores obtained by drilling through the Nojima Fault at a drilling depth of 389.52 m. The zonation of deformation and alteration in the central zone of the fault is clearly seen in cores of granite from the hanging wall, in the following order: (i) host rock, which is characterized by some intragranular microcracks and in situ alteration of mafic minerals and feldspars; (ii) weakly deformed and altered rocks, which are characterized by transgranular cracks and the dissolution of mafic minerals, and by the precipitation of zeolites and iron hydroxide materials; (iii) random fabric fault breccia, which is characterized by fragmentation, by anastomosing networks of transgranular cracks, and by the precipitation of zeolites and iron hydroxide materials; and (iv) fault gouge, which is characterized by the precipitation of smectite and localized cataclastic flow. This zonation implies that the fault has been weakened gradually by fluid-related fracturing over time. In the footwall, a gouge layer measuring only 15 mm thick is present just below the surface of the Nojima Fault. These observations are the basis for a model of fluid behavior along the Nojima Fault. The model invokes the percolation of meteoric fluids through cracks in the hanging wall fault zone during interseismic periods, resulting in chemical reactions in the fault gouge layer to form smectite. The low permeability clay-rich gouge layer sealed the footwall. The fault gouge was brecciated during coseismic or postseismic periods, breaking the seal and allowing fluids to readily flow into the footwall, thus causing a slight alteration. Chemical reactions between fluids and the fault breccia and gouge generated new fault gouge, which resealed the footwall, resulting in a low fluid condition in the footwall during interseismic periods. 相似文献
12.
Changes in magnetic and fractal properties of fractured granites near the Nojima Fault, Japan 总被引：2，自引：0，他引：2
Abstract Anisotropy of magnetic susceptibility (AMS) has been used to infer finite strain fabrics in plastically deformed rocks, but there are few studies of magnetic properties in fractured fault rocks. Changes in magnetic and fractal properties of fractured granites from the Disaster Prevention Research Institute, Kyoto University (DPRI) 500 m drilling core towards the Nojima Fault and of the well-foliated fault gouge are described. Fractal analysis of fractured granites shows that the fractal dimension ( D ) increases linearly toward the gouge zone of the fault. In weakly fractured granites ( D = 1.05–1.24), it was found that the degree of AMS correlates positively with the fractal dimension, suggesting a fracture-related magnetic fabric due to fracturing. In strongly fractured granites ( D = 1.25–1.50), weaker, nearly isotropic AMS is found, suggesting erasure by the fragmentation of the magnetic minerals. Within the fault gouge zone, an isotropic AMS fabric was found, as well as twofold increases in magnetic intensity and susceptibility. These changes reflect the production of new magnetite grains, subsequently confirmed by hysteresis studies, which suggests that fault gouge might be regarded as the source of the regional geomagnetic field contrast along active faults. Thus, AMS is clearly a potentially useful tool for inferring the fracturing texture of magnetic minerals in fractured rocks and detecting active faults from the high susceptibility contrast of fault gouge. 相似文献
13.
James R. O'Neil 《Pure and Applied Geophysics》1984,122(2-4):440-446
Measurements were made of the amounts of D,18O, and H2O+ in fault gouge collected over a depth of 400 m in the San Andreas fault of California. The amounts and isotopic compositions of the pore fluids, also analyzed, suggest that formation waters from adjacent Franciscan rocks have migrated into the gouge and mixed with local meteoric water. Thus the gouge is an open system permeable to fluid flow. This permeability has important implications concerning heat flow along the fault zone.Analyses of the fault gouge itself give information on the amounts, timing, and conditions of formation of the clay minerals.Stable-isotope analyses of materials from fault zones are good indicators of water-rock interactions that bear importantly on processes taking place in seismically active regions. 相似文献
14.
Internal structure of Longmenshan fault zone at Hongkou outcrop,Sichuan, China,that caused the 2008 Wenchuan earthquake 
下载免费PDF全文
下载免费PDF全文 This paper reports the internal structures of the Beichuan fault zone of Longmenshan fault system that caused the 2008 Wenchuan earthquake, at an outcrop in Hongkou, Sichuan province, China. Present work is a part of comprehensive project of Institute of Geology, China Earthquake Administration, trying to understand deformation processes in Longmenshan fault zones and eventually to reproduce Wenchuan earthquake by modeling based on measured mechanical and transport properties. Outcrop studies could be integrated with those performed on samples recovered from fault zone drilling, during the Wenchuan Earthquake Fault Scientific Drilling (WFSD) Project, to understand along-fault and depth variation of fault zone properties. The hanging wall side of the fault zone consists of weakly-foliated, clayey fault gouge of about 1 m in width and of several fault breccia zones of 30–40 m in total width. We could not find any pseudotachylite at this outcrop. Displacement during the Wenchuan earthquake is highly localized within the fault gouge layer along narrower slipping-zones of about 10 to 20 mm in width. This is an important constraint for analyzing thermal pressurization, an important dynamic weakening mechanism of faults. Overlapping patterns of striations on slickenside surface suggest that seismic slip at a given time occurred in even narrower zone of a few to several millimeters, so that localization of deformation must have occurred within a slipping zone during coseismic fault motion. Fault breccia zones are bounded by thin black gouge layers containing amorphous carbon. Fault gouge contains illite and chlorite minerals, but not smectite. Clayey fault gouge next to coseismic slipping zone also contains amorphous carbon and small amounts of graphite. The structural observations and mineralogical data obtained from outcrop exposures of the fault zone of the Wenchuan earthquake can be compared with those obtained from the WFSD-1 and WFSD-2 boreholes, which have been drilled very close to the Hongkou outcrop. The presence of carbon and graphite, observed next to the slipping-zone, may affect the mechanical properties of the fault and also provide useful information about coseismic chemical changes. 相似文献
15.
Koichiro Fujimoto Hidemi Tanaka Takayuki Higuchi Naoto Tomida Tomoyuki Ohtani Hisao Ito 《Island Arc》2001,10(3-4):401-410
Abstract Mineralogical and geochemical studies on the fault rocks from the Nojima–Hirabayashi borehole, south-west Japan, are performed to clarify the alteration and mass transfer in the Nojima Fault Zone at shallow depths. A complete sequence from the hornblende–biotite granodiorite protolith to the fault core can be observed without serious disorganization by surface weathering. The parts deeper than 426.2 m are in the fault zone where rocks have suffered fault-related deformation and alteration. Characteristic alteration minerals in the fault zone are smectite, zeolites (laumontite, stilbite), and carbonate minerals (calcite and siderite). It is inferred that laumontite veins formed at temperatures higher than approximately 100°C during the fault activity. A reverse component in the movement of the Nojima Fault influences the distribution of zeolites. Zeolite is the main sealing mineral in relatively deep parts, whereas carbonate is the main sealing mineral at shallower depths. Several shear zones are recognized in the fault zone. Intense alteration is localized in the gouge zones. Rock chemistry changes in a different manner between different shear zones in the fault zone. The main shear zone (MSZ), which corresponds to the core of the Nojima Fault, shows increased concentration of most elements except Si, Al, Na, and K. However, a lower shear zone (LSZ-2), which is characterized by intense alteration rather than cataclastic deformation, shows a decreased concentration of most elements including Ti and Zr. A simple volume change analysis based on Ti and Zr immobility, commonly used to examine the changes in fault rock chemistry, cannot account fully for the different behaviors of Ti and Zr among the two gouge zones. 相似文献
16.
Tomoyuki Ohtani Hidemi Tanaka Koichiro Fujimoto Takayuki Higuchi Naoto Tomida Hisao Ito 《Island Arc》2001,10(3-4):392-400
Abstract The internal structures of the Nojima Fault, south-west Japan, are examined from mesoscopic observations of continuous core samples from the Hirabayashi Geological Survey of Japan (GSJ) drilling. The drilling penetrated the central part of the Nojima Fault, which ruptured during the 1995 Kobe earthquake (Hyogo-ken Nanbu earthquake) ( M 7.2). It intersected a 0.3 m-thick layer of fault gouge, which is presumed to constitute the fault core (defined as a narrow zone of extremely concentrated deformation) of the Nojima Fault Zone. The rocks obtained from the Hirabayashi GSJ drilling were divided into five types based on the intensities of deformation and alteration: host rock, weakly deformed and altered granodiorite, fault breccia, cataclasite, and fault gouge. Weakly deformed and altered granodiorite is distributed widely in the fault zone. Fault breccia appears mostly just above the fault core. Cataclasite is distributed mainly in a narrow (≈1 m wide) zone in between the fault core and a smaller gouge zone encountered lower down from the drilling. Fault gouge in the fault core is divided into three types based on their color and textures. From their cross-cutting relationships and vein development, the lowest fault gouge in the fault core is judged to be newer than the other two. The fault zone characterized by the deformation and alteration is assumed to be deeper than 426.2 m and its net thickness is > 46.5 m. The fault rocks in the hanging wall (above the fault core) are deformed and altered more intensely than those in the footwall (below the fault core). Furthermore, the intensities of deformation and alteration increase progressively towards the fault core in the hanging wall, but not in the footwall. The difference in the fault rock distribution between the hanging wall and the footwall might be related to the offset of the Nojima Fault and/or the asymmetrical ground motion during earthquakes. 相似文献
17.
High magnetic susceptibility produced by thermal decomposition of core samples from the Chelungpu fault in Taiwan 总被引：7，自引：0，他引：7
Wataru Tanikawa Toshiaki Mishima Tetsuro Hirono Wonn Soh Sheng-Rong Song 《Earth and Planetary Science Letters》2008,272(1-2):372-381
We carried out thermomagnetic susceptibility analyses of fault rocks from core samples from Hole B of the Taiwan Chelungpu Fault Drilling Project (TCDP) to investigate the cause of high magnetic susceptibilities in the fault core. Test samples were thermally and mechanically treated by heating to different maximum temperatures of up to 900 °C and by high-velocity frictional tests before magnetic analyses. Thermomagnetic susceptibility analyses of natural fault rocks revealed that magnetization increased at maximum heating temperatures above 400 °C in the heating cycle, and showed three step increases, at 600 to 550 °C and at 300 °C during the cooling cycle. These behaviors are consistent with the presence of pyrite, siderite and chlorite, suggesting that TCDP gouge originally included these minerals, which contributed to the generation the magnetic susceptibility by thermomechanical reactions. The change in magnetic susceptibility due to heating of siderite was 20 times that obtained by heating pyrite and chlorite, so that only a small fraction of siderite decomposition is enough to cause the slight increase of the susceptibility observed in the fault core. Color measurement results indicate that thermal decomposition by frictional heating took place under low-oxygen conditions at depth, which prevented the minerals from oxidizing to reddish hematite. This finding supports the inference that a mechanically driven chemical reaction partly accounts for the high magnetic susceptibility. A kinetic model analysis confirmed that frictional heating can cause thermal decomposition of siderite and pyrite. Our results show that decomposition of pyrite to pyrrhotite, siderite and, to some extent, chlorite to magnetite is the probable mechanism explaining the magnetic anomaly within the Chelungpu fault zone. 相似文献