共查询到19条相似文献，搜索用时 125 毫秒
1.
浅层人工地震勘探是探查城市隐伏活动断层最有效的手段之一,然而受近地表探测盲区和探测分辨率的限制,该方法难以获取活动断层超浅层上断点的准确埋深位置。地质雷达探测方法在一定程度上可弥补浅层人工地震勘探的不足。为探索浅层人工地震勘探和地质雷达探测的联合应用效果,分析其在城市隐伏活动断层探测中的应用潜力,选取河南省鹤壁市汤东断裂西支为研究对象,并在冯屯村和前交卸村分别开展联合探测,获取高信噪比的浅层人工地震反射剖面和地质雷达剖面。浅层人工地震勘探揭示的冯屯村处汤东断裂西支上断点埋深为60～70 m,地质雷达探测揭示的上断点埋深约为2.5 m,结合平均沉积速率推测汤东断裂西支在冯屯村的最新活动时代约为25 ka。浅层人工地震勘探揭示的前交卸村处汤东断裂西支上断点埋深为50～60 m,地质雷达探测揭示出汤东断裂西支在前交卸村处未造成近地表约10 m以内的地层断错。研究结果表明,在城市隐伏活动断层探测中,采用浅层人工地震勘探和地质雷达探测相结合的方法,不但可有效确定活动断层的位置,且可进一步约束活动断层上断点的准确埋深,有利于指导后期地震地质勘探中的探槽和钻孔布设。 相似文献
2.
3.
4.
利用地震剖面研究夏垫断裂西南段的活动性 总被引：5，自引：1，他引：4
地震方法是针对厚覆盖区城市直下型活动断裂的一种不可替代的探测技术,对于不同的探测深度需采用不同的排列长度。为研究夏垫断裂在远离三河-平谷8.0级地震震源区的活动性,我们在该震源区SW方向约30km处开展了中浅层反射地震探测试验,并跨过中浅层地震探测到的夏垫断裂进行了浅层反射地震探测试验。浅层和中浅层地震探测的试验结果表明,在5m道间距的地震剖面上,在200m深度以下夏垫断裂得到了较好的反映,在该深度以上,该断裂反映不明显;在2m道间距的地震剖面上,夏垫断裂错断明显,但剖面上的最浅一组反射波(深度约30m)却没有发生明显错断。由此得出:距1679年三河-平谷8.0级地震震源位置SW方向约30km处,夏垫断裂的活动性减弱 相似文献
5.
用瞬态多道瑞利波法研究夏垫隐伏断裂附近的浅层速度结构变化 总被引：2，自引：0，他引：2
用瞬态多道瑞利波法，对夏垫隐伏断裂附近的浅层速度结构进行了调查研究，利用f-k域分析方法提取瑞利波频散曲线，分别用遗传算法和半波长方法反演，得到断裂附近的横波速度结构和瑞利波相速度分布剖面。反演结果与钻孔资料的对比表明，瞬态瑞利波法对于探测上断点埋深较浅的隐伏断裂是有效和可靠的。 相似文献
6.
为进一步深入研究夏垫断裂的发震构造及活动性，在夏垫断裂震中区开展浅层地震勘探，布设小道距、高密度地震勘探测线，对地震反射剖面进行综合解释。以潘各庄段为中心，向两侧展开布设，共布设浅层地震勘探测线12条，测线总长约18 km。野外数据采集采用中间激发、双边不对称接收、满覆盖次数不少于12次的观测系统。原始资料经过常规处理和精细处理，获得了高质量的反射波叠加时间剖面。地震反射时间剖面揭示的波组变化特征明显，断裂特征清晰，解释夏垫断裂为倾向SE、视倾角约为72°的正断层；同时展现了自小石各庄至南张岱延伸约20 km范围内夏垫断裂的空间展布及浅部构造特征，解释测线范围内夏垫断裂走向约为N40°E。在此基础上，结合微地貌测量和以往研究成果，推测夏垫断裂为全新世活动断裂，其中夏垫断裂中心段伴随次断裂发育和断层绕射波，该特征向两侧减弱，与断裂陡坎的分布和连续的高差变化相对应，同时验证了夏垫镇潘各庄附近为震中的结果。探测结果所揭示的夏垫断裂的空间展布及地层结构特征与地质资料吻合。 相似文献
7.
8.
以跨谢通门—青都断裂的两条高密度电阻率法探测资料为基础, 对高密度电阻率法在青藏高原日喀则地区隐伏断裂探测中的首次应用进行了详细介绍． 所获取的高密度电法剖面显示, 该断层的电阻率异常特征清晰, 其上断点埋深可达20—30 m, 较浅层人工地震探测所揭示的断层上断点埋深(50 m)更浅, 结合地层年代资料推测该断裂的最新活动时期为早—中更新世． 探测结果表明: 高密度电法剖面清晰地显示了断层在浅部松散层的延伸, 适用于日喀则地区的隐伏断层探测; 相较于浅层人工地震探测, 该方法对浅部松散层的探测具有明显优势, 一定条件下能够更好地揭示断层上断点埋深, 可与浅层人工地震探测形成互补． 需要指出的是, 在应用中需重视测区水文地质及地层发育情况对探测的影响． 相似文献
9.
六盘山东麓地区活动构造研究 总被引：1，自引：0，他引：1
该文介绍了六盘山东麓地区活动构造研究的主要研究内容,包括：六盘山东麓断裂第四纪以来的活动特征、六盘山东麓断裂的变形幅度与位错速率、古地震事件及六盘山东麓断裂带的分段性。 相似文献
10.
11.
通过航卫片解译和野外实地调查,对六盘山断裂带新活动特征开展详细研究。调查发现六盘山东麓断裂为一条全新世活动的逆左旋走滑断裂,而六盘山西麓断裂为晚更新世活动的挤压逆冲断裂,二者的构造活动控制和影响了本区的地貌发育和地震活动。同时利用SRTM数据提取六盘山东西两侧泾河和水洛河上游流域盆地水系,得到流域盆地面积-高程积分值(HI值)分布图,探讨本区活动构造和地貌的响应关系。分析结果表明,在相同的岩性条件下六盘山东侧的HI值要低于西侧,反映了活动断裂对本地区地貌演化特征的不同影响。上述地貌分析研究为认识和理解六盘山地区地貌演化以及控制因素提供了基础数据和思路。 相似文献
12.
13.
The Xiadian Fault is a very important concealed active fault in the Beijing Plain. It is the seismogenic fault of the Sanhe-Pinggu MS8.0 earthquake in 1679. The ancient earthquake sequence in the long historical period is of great significance to understand accurately the activity characteristics of the fault and effectively reduce the earthquake disaster risk in Beijing. We have re-interpreted the Dahuzhuang trench, and identified three layers of buried paleosol, six collapsed wedges and one sand liquefaction event. Further, through the comparison with the landmark strata and paleo-earthquake events revealed by other trenches on the fault, an ancient earthquake sequence with a long historical period of the Xiadian Fault was established:since the 31ka, the Xiadian Fault has 11 occurrences of earthquake events (including the 1679 earthquake), and the average recurrence interval is about 2.8ka. The paleo-seismic sequence also shows that there is an ancient earthquake cluster period from 25ka to 15ka, and there are 5 strong earthquakes in the cluster period. The average recurrence interval is about 2.0ka, which reflects the phase difference of the Xiadian Fault activity. 相似文献
14.
RESEARCH ON NEOGENE-QUATERNARY STRATIGRAPHIC STRUCTURE AND SHALLOW TECTONIC FEATURES IN THE NORTH SECTION OF DAXING FAULT ZONE BASED ON SHALLOW SEISMIC REFLECTION PROFILING 
下载免费PDF全文
下载免费PDF全文 HE Fu-bing XU Xi-wei HE Zhen-jun ZHANG Xiao-liang LIU Li-yan ZHANG Wei WEI Bo NI Jing-bo 《地震地质》1979,42(4):893-908
The Daxing Fault is an important buried fault in the Beijing sub-plain, which is also the boundary fault of the structural unit between Langgu sub-sag and Daxing sub-uplift. So far, there is a lack of data on the shallow tectonic features of the Daxing Fault, especially for the key structural part of its northern section where it joins with the Xiadian Fault. In this paper, the fine stratigraphic classifications and shallow tectonic features of the northern section in the main Daxing Fault are explored by using three NW-trending shallow seismic reflection profiles. These profiles pass through the Daxing earthquake(M6¾)area in 1057AD and the northern section of the main Daxing Fault. The results show that seven strong reflection layers(T01—T03, TQ and T11—T13)are recognized in the strata of Neogene and Quaternary beneath the investigated area. The largest depth of strong reflection layer(T13)is about 550~850ms, which is interpreted as an important surface of unconformity between Neogene and Paleogene or basement rock. The remaining reflection layers, such as T01 and TQ, are interpreted as internal interfaces in Neogene to Quaternary strata. There are different rupture surfaces and slip as well as obviously different structural features of the Daxing Fault revealed in three shallow seismic reflection profiles. The two profiles(2-7 and 2-8)show obvious rupture surfaces, which are the expression of Daxing Fault in shallow strata. Along the profile(2-6), which is located at the end of the Daxing fault structure, a triangle deformation zone or bending fracture can be identified, implying that the Daxing Fault is manifested as bending deformation instead of rupture surfaces at its end section. This unique structural feature can be explained by a shearing motion at the end of extensional normal fault. Therefore, the Daxing Fault exhibits obviously different tectonic features of deformation or displacement at different structural locations. The attitude and displacement of the fault at the shallow part are also different to some extent. From the southwest section to the northeast section of the fault, the dip angle gradually becomes gentler(80°~60°), the upper breakpoint becomes deeper(160~600m), and the fault displacement in Neogene to Quaternary strata decreases(80~0m). Three shallow seismic reflection profiles also reveal that the Daxing Fault is a normal fault during Neogene to early Quaternary, and the deformation or displacement caused by the activity of the fault reaches the reflection layer T02. This depth is equivalent to the sedimentary strata of late Early-Pleistocene. Therefore, the geometry and morphology of the Daxing Fault also reveal that the early normal fault activity has continued into the Early Pleistocene, but the evidence of activity is not obvious since the late Pleistocene. The earthquakes occurring along the Daxing Fault, such as Daxing earthquake(M6¾)in 1057AD, may not have much relation with this extensional normal fault, but with another new strike-slip fault. A series of focal mechanism solutions of modern earthquakes reveal that the seismic activity is closely related to the strike-slip fault. The Daxing Fault extends also downwards into the lower crust, and may be cut by the steeply dipping new Xiadian Fault on deep seismic reflection profile. The northern section of the Daxing Fault strikes NNE, with a length of about 23km, arranged in a right step pattern with the Xiadian Fault. Transrotational basins have been developed in the junction between the northern Daxing Fault and the southern Xiadian Fault. Such combined tectonic features of the Daxing Fault and Xiadian Fault evolute independently under the extensional structure background and control the development of the Langgu sub-sag and Dachang sub-sag, respectively. 相似文献
15.
XU Bin-bin ZHANG Dong-li ZHANG Pei-zhen ZHENG Wen-jun BI Hai-yun TIAN Qing-ying ZHANG Yi-peng XIONG Jian-guo LI Zhi-gang 《地震地质》2019,41(3):587-602
Slip rate is one of the most important parameters in quantitative research of active faults. It is an average rate of fault dislocation during a particular period, which can reflect the strain energy accumulation rate of a fault. Thus it is often directly used in the evaluation of seismic hazard. Tectonic activities significantly influence regional geomorphic characteristics. Therefore, river evolution characteristics can be used to study tectonic activities characteristics, which is a relatively reliable method to determine slip rate of fault. Based on the study of the river geomorphology evolution process model and considering the influence of topographic and geomorphic factors, this paper established the river terrace dislocation model and put forward that the accurate measurement of the displacement caused by the fault should focus on the erosion of the terrace caused by river migration under the influence of topography. Through the analysis of the different cases in detail, it was found that the evolution of rivers is often affected by the topography, and rivers tend to migrate to the lower side of the terrain and erode the terraces on this side. However, terraces on the higher side of the terrain can usually be preserved, and the displacement caused by faulting can be accumulated relatively completely. Though it is reliable to calculate the slip rate of faults through the terrace dislocation on this side, a detailed analysis should be carried out in the field in order to select the appropriate terraces to measure the displacement under the comprehensive effects of topography, landform and other factors, if the terraces on both sides of the river are preserved. In order to obtain the results more objectively, we used Monte Carlo method to estimate the fault displacement and displacement error range. We used the linear equation to fit the position of terrace scarps and faults, and then calculate the terrace displacement. After 100, 000 times of simulation, the fault displacement and its error range could be obtained with 95%confidence interval. We selected the Gaoyan River in the eastern Altyn Tagh Fault as the research object, and used the unmanned air vehicle aerial photography technology to obtain the high-resolution DEM of this area. Based on the terrace evolution model proposed in this paper, we analyzed the terrace evolution with the detailed interpretation of the topography and landform of the DEM, and inferred that the right bank of the river was higher than the left bank, which led to the continuous erosion of the river to the left bank, while the terraces on the right bank were preserved. In addition, four stages of fault displacements and their error ranges were obtained by Monte Carlo method. By integrating the dating results of previous researches in this area, we got the fault slip rate of(1.80±0.51)mm/a. After comparing this result with the slip rates of each section of Altyn Tagh Fault studied by predecessors, it was found that the slip rate obtained in this paper is in line with the variation trend of the slip rate summarized by predecessors, namely, the slip rate gradually decreases from west to east, from 10~12mm/a in the middle section to about 2mm/a at the end. 相似文献
16.
青川县乔庄镇主城区坐落于乔庄河Ⅰ级河流阶地面上,平武-青川断裂分为3支呈隐伏状穿过主城区,地表未见明显的断裂新活动形迹。2008年5月12日发生的汶川MS8.0级地震,对青川县乔庄镇造成了比较严重的破坏,出现了沿平武-青川主干断裂通过位置震害显著加重的条带状异常现象,但未见明显的地表破裂。本文在地面地质调查、浅层地球物理勘探和探槽开挖验证结果的基础上,对平武-青川断裂在乔庄镇主城区的通过位置进行了重新定位,定位结果与前人研究结果存在一定的差异。结合地表调查发现的零星地表破裂和探槽下部砂砾石层出现的小尺度变形及位错现象分析,乔庄镇条带状震害加重异常现象应是平武-青川断裂在汶川地震时发生的近地表错动所致。由此联系到汶川地震的余震条带与平武-青川断裂乔庄以东段基本重合的事实,平武-青川断裂的活动性应是下一步研究工作的方向。 相似文献
17.
UPPER CRUSTAL VELOCITY STRUCTURE AND CONSTRAINING FAULT INTERPRETATION FROM SHUNYI-TANGGU REFRACTION EXPERIMENT DATA 下载免费PDF全文
下载免费PDF全文 The urban active fault survey is of great significance to improve the development and utilization of urban underground space, the urban resilience, the regional seismic reference modeling, and the natural hazard prevention. The Beijing-Tianjin metropolitan region with the densest population is one of the most developed and most important urban groups, located at the northeastern North China plain. There are several fault systems crossing and converging in this region, and most of the faults are buried. The tectonic setting of the faults is complex from shallow to deep. There are frequent historical earthquakes in this area, which results in higher earthquake risk and geological hazards. There are two seismicity active belts in this area. One is the NE directed earthquake belt located at the east part of the profile in northern Ninghai near the Tangshan earthquake region. The other is located in the Beijing plain in the northwest of the profile and near the southern end of Yanshan fold belt, where the 1679 M8.0 Sanhe-Pinggu earthquake occurred, the largest historical earthquake of this area. Besides, there are some small earthquake activities related to the Xiadian Fault and the Cangdong Fault at the central part of the profile.
The seismic refraction experiment is an efficient approach for urban active fault survey, especially in large- and medium-size cities. This method was widely applied to the urban hazard assessment of Los Angeles. We applied a regularized tomography method to modeling the upper crustal velocity structure from the high-resolution seismic refraction profile data which is across the Beijing-Tianjin metropolitan region. This seismic refraction profile, with 185km in length, 18 chemical explosive shots and 500m observation space, is the profile with densest seismic acquisition in the Beijing-Tianjin metropolitan region up to now. We used the trial-error method to optimize the starting velocity model for the first-arrival traveltime inversion. The multiple scale checker board tests were applied to the tomographic result assessment, which is a non-linear method to quantitatively estimate the inversion results. The resolution of the tomographic model is 2km to 4km through the ray-path coverage when the threshold value is 0.5 and is 4km to 7km through the ray-path coverage when the threshold value is 0.7. The tomographic model reveals a very thick sediment cover on the crystalline basement beneath the Beijing-Tianjin metropolitan region. The P wave velocity of near surface is 1.6km/s. The thickest sediment cover area locates in the Huanghua sag and the Wuqing sag with a thickness of 8km, and the thinnest area is located at the Beijing sag with a thickness of 2km. The thickness of the sediment cover is 4km and 5km in the Cangxian uplift and the Dacang sag, respectively. The depth of crystalline basement and the tectonic features of the geological subunits are related to the extension and rift movement since the Cenozoic, which is the dynamics of formation of the giant basins.
It is difficult to identify a buried fault system, for a tomographic regularization process includes velocity smoothing, and limited by the seismic reflection imaging method, it is more difficult to image the steep fault. Velocity and seismic phase variations usually provide important references that describe the geometry of the faults where there are velocity differences between the two sides of fault. In this paper, we analyzed the structural features of the faults with big velocity difference between the two sides of the fault system using the velocity difference revealed by tomography and the lateral seismic variations in seismograms, and constrained the geometry of the major faults in the study region from near surface to upper crust. Both the Baodi Fault and the Xiadian Fault are very steep with clear velocity difference between their two sides. The seismic refraction phases and the tomographic model indicate that they both cut the crystalline basement and extend to 12km deep. The Baodi Fault is the boundary between the Dachang sag and the Wuqing sag. The Xiadian Fault is a listric fault and a boundary between the Tongxian uplift and the Dachang sag. The tomographic model and the earthquake locations show that the near-vertical Shunyi-Liangxiang Fault, with a certain amount of velocity difference between its two sides, cuts the crystalline basement, and the seismicity on the fault is frequent since Cenozoic. The Shunyi-Liangxiang Fault can be identified deep to 20km according to the seismicity hypocenters.
The dense acquisition seismic refraction is a good approach to construct velocity model of the upper crust and helpful to identify the buried faults where there are velocity differences between their two sides. Our results show that the seismic refraction survey is a useful implement which provides comprehensive references for imaging the fault geometry in urban active fault survey. 相似文献
The seismic refraction experiment is an efficient approach for urban active fault survey, especially in large- and medium-size cities. This method was widely applied to the urban hazard assessment of Los Angeles. We applied a regularized tomography method to modeling the upper crustal velocity structure from the high-resolution seismic refraction profile data which is across the Beijing-Tianjin metropolitan region. This seismic refraction profile, with 185km in length, 18 chemical explosive shots and 500m observation space, is the profile with densest seismic acquisition in the Beijing-Tianjin metropolitan region up to now. We used the trial-error method to optimize the starting velocity model for the first-arrival traveltime inversion. The multiple scale checker board tests were applied to the tomographic result assessment, which is a non-linear method to quantitatively estimate the inversion results. The resolution of the tomographic model is 2km to 4km through the ray-path coverage when the threshold value is 0.5 and is 4km to 7km through the ray-path coverage when the threshold value is 0.7. The tomographic model reveals a very thick sediment cover on the crystalline basement beneath the Beijing-Tianjin metropolitan region. The P wave velocity of near surface is 1.6km/s. The thickest sediment cover area locates in the Huanghua sag and the Wuqing sag with a thickness of 8km, and the thinnest area is located at the Beijing sag with a thickness of 2km. The thickness of the sediment cover is 4km and 5km in the Cangxian uplift and the Dacang sag, respectively. The depth of crystalline basement and the tectonic features of the geological subunits are related to the extension and rift movement since the Cenozoic, which is the dynamics of formation of the giant basins.
It is difficult to identify a buried fault system, for a tomographic regularization process includes velocity smoothing, and limited by the seismic reflection imaging method, it is more difficult to image the steep fault. Velocity and seismic phase variations usually provide important references that describe the geometry of the faults where there are velocity differences between the two sides of fault. In this paper, we analyzed the structural features of the faults with big velocity difference between the two sides of the fault system using the velocity difference revealed by tomography and the lateral seismic variations in seismograms, and constrained the geometry of the major faults in the study region from near surface to upper crust. Both the Baodi Fault and the Xiadian Fault are very steep with clear velocity difference between their two sides. The seismic refraction phases and the tomographic model indicate that they both cut the crystalline basement and extend to 12km deep. The Baodi Fault is the boundary between the Dachang sag and the Wuqing sag. The Xiadian Fault is a listric fault and a boundary between the Tongxian uplift and the Dachang sag. The tomographic model and the earthquake locations show that the near-vertical Shunyi-Liangxiang Fault, with a certain amount of velocity difference between its two sides, cuts the crystalline basement, and the seismicity on the fault is frequent since Cenozoic. The Shunyi-Liangxiang Fault can be identified deep to 20km according to the seismicity hypocenters.
The dense acquisition seismic refraction is a good approach to construct velocity model of the upper crust and helpful to identify the buried faults where there are velocity differences between their two sides. Our results show that the seismic refraction survey is a useful implement which provides comprehensive references for imaging the fault geometry in urban active fault survey. 相似文献
18.
TERRACE DEFORMATION AND SLIP RATES OF THE DONGBIELIEKE FAULT IN WESTERN JUNGGAR BASIN SINCE THE LATE QUATERNARY 下载免费PDF全文
下载免费PDF全文 Strike-slip fault plays an important role in the process of tectonic deformation since Cenozoic in Asia. The role of strike-slip fault in the process of mountain building and continental deformation has always been an important issue of universal concern to the earth science community. Junggar Basin is located in the hinterland of Central Asia, bordering on the north the Altay region and the Baikal rift system, which are prone to devastating earthquakes, the Tianshan orogenic belt and the Tibet Plateau on the south, and the rigid blocks, such as Erdos, the South China, the North China Plain and Amur, on the east. Affected by the effect of the Indian-Eurasian collision on the south of the basin and at the same time, driven by the southward push of the Mongolian-Siberian plate, the active structures in the periphery of the basin show a relatively strong activity. The main deformation patterns are represented by the large-scale NNW-trending right-lateral strike-slip faults dominated by right-lateral shearing, the NNE-trending left-lateral strike-slip faults dominated by left-lateral shearing, and the thrust-nappe structure systems distributed in piedmont of Tianshan in the south of the basin. There are three near-parallel-distributed left-lateral strike-slip faults in the west edge of the basin, from the east to the west, they are:the Daerbute Fault, the Toli Fault and the Dongbielieke Fault. This paper focuses on the Dongbielieke Fault in the western Junggar region. The Dongbielieke Fault is a Holocene active fault, located at the key position of the western Junggar orogenic belt. The total length of the fault is 120km, striking NE. Since the late Quaternary, the continuous activity of the Dongbielieke Fault has caused obvious left-lateral displacement at all geomorphologic units along the fault, and a linear continuous straight steep scarp was formed on the eastern side of the Tacheng Basin. According to the strike and the movement of fault, the fault can be divided into three segments, namely, the north, middle and south segment.
In order to obtain a more accurate magnitude of the left-lateral strike-slip displacement and the accumulative left-lateral strike-slip displacement of different geomorphic surfaces, we chose the Ahebiedou River in the southern segment and used the UAV to take three-dimensional photographs to obtain the digital elevation model(the accuracy is 10cm). And on this basis, the amount of left-lateral strike-slip displacement of various geological masses and geomorphic surfaces(lines)since their formation is obtained. The maximum left-lateral displacement of the terrace T5 is(30.7±2.1)m and the minimum left-lateral displacement is(20.1±1.3)m; the left-lateral displacement of the terrace T4 is(12±0.9)m, and the left-lateral displacement of the terrace T2 is(8.7±0.6)m. OSL dating samples from the surface of different level terraces(T5, T4, T2 and T1)are collected, processed and measured, and the ages of the terraces of various levels are obtained. By measuring the amount of left-lateral displacements since the Late Quaternary of the Dongbielieke Fault and combining the dating results of the various geomorphic surfaces, the displacements and slip rates of the fault on each level of the terraces since the formation of the T5 terrace are calculated. Using the maximum displacement of(30.7±2.1)m of the T5 terrace and the age of the geomorphic surface on the west bank of the river, we obtained the slip rate of(0.7±0.11)mm/a; similarly, using the minimum displacement of(20.1±1.3)m and the age of the geomorphic surface of the east bank, we obtained the slip rate of(0.46±0.07)mm/a. T5 terrace is developed on both banks of the river and on both walls of the fault. After the terraces are offset by faulting, the terraces on foot wall in the left bank of the river are far away from the river, and the erosion basically stops. After that, the river mainly cuts the terraces on the east bank. Therefore, the west bank retains a more accurate displacement of the geomorphic surface(Gold et al., 2009), so the left-lateral slip rate of the T5 terrace is taken as(0.7±0.11)mm/a. The left-lateral slip rate calculated for T4 and T2 terraces is similar, with an average value of(0.91±0.18)mm/a. In the evolution process of river terraces, the lateral erosion of high-level terrace is much larger than that of low-level terrace, so the slip rate of T4 and T2 terraces is closer to the true value. The left-lateral slip rate of the Dongbielieke Fault since the late Quaternary is(0.91±0.18)m/a. Compared with the GPS slip rate in the western Junggar area, it is considered that the NE-trending strike-slip motion in this area is dominated by the Dongbielieke Fault, which absorbs a large amount of residual deformation while maintaining a relatively high left-lateral slip rate. 相似文献
19.
采用深、浅地震反射和钻孔地质剖面相结合的探测方法,对太行山东缘汤阴地堑的地壳结构和隐伏活动断裂进行了研究.结果表明,该区地壳厚度约36~42 km,莫霍面从华北平原区向太行山下倾伏.汤阴地堑是一个受汤东断裂控制的半地堑构造,其基底面形态与莫霍面展布呈"镜像"关系.汤东断裂是1条继承性的隐伏活动断裂,该断裂向上错断了埋深约20 m的中更新世晚期地层,向下延伸至上地壳底部.综合分析深地震反射和已有深地震宽角反射/折射剖面结果,发现深地震反射剖面上的中-下地壳强反射层和壳幔过渡带反射,与深地震宽角反射/折射剖面上出现的中-下地壳正负速度梯度变化层有着较好的对应关系,这表明本区中-下地壳和壳幔过渡带可能为一系列速度递变层或高低速物质的互变层,埋深约15~16 km的强反射带为上地壳与中-下地壳的转换带,壳幔过渡带的底界为地壳与地幔的分界.研究结果为深入理解该区的深部动力学过程、分析研究深浅构造关系、评价断裂的活动性提供了依据. 相似文献