共查询到20条相似文献，搜索用时 31 毫秒
1.
DATA COMPARATIVE ANALYSIS BETWEEN SFM DATA AND DGPS DATA: A CASE STUDY FROM FAULT SCARP IN THE EAST BANK OF HONGSHUIBA RIVER,NORTHERN MARGIN OF THE QILIAN SHAN 
下载免费PDF全文
下载免费PDF全文 With the development of the techniques acquiring high-resolution digital terrain data,the digital terrain data acquisition technology has been widespread applied to the geoscience research.A revolutionary,low-cost and simply operative SfM (Structure from Motion) technology will make obtain high-resolution DEM data more convenient for researches on active tectonics.This paper summarizes the basic principles and workflows of SfM technology and processes and selects the Hongshuiba River area along the northern margin of the Qilian Shan to conduct data collection.We use a series of digital pictures to produce a texture with geographic information,in which data resolution is 6.73cm/pix and average density of point cloud is 220.667 point/m2.The coverage area is 0.286km2.Further,in order to compare the accuracy between SfM data and differential GPS (DGPS) data in details,SfM data are vertically shifted and tilt-corrected.After optimizing corrections of SfM data,the absolute value of elevation difference between two data substantially concentrates around 20cm,roughly equivalent to 2-folds of data error only after the elevation error correction.Elevation difference between two data is 10~15cm in 90% confidence interval.The maximum error is about 30cm,but accounts for less than 10%.Along the direction of fault trace,the height of fault scarp extracted from SfM data shows that vertical displacement of the latest tectonic activity in the east bank of Hongshuiba River is about 1m,and some minimum scarps height may be 0.3m.The results show SfM technology with high vertical accuracy can be able to replace differential GPS in high-precision topographic survey.After correcting of SfM data,elevation difference still exists,which may be associated with methods of generating DEM and SfM data accuracy,which in turn is controlled by the number and distribution of Ground Control Points (GCPs),photos density and camera shooting height,but also related to surface features,Fodongmiao-Hongyazi Fault 相似文献
2.
USING UAV PHOTOGRAMMETRY TECHNOLOGY TO EXTRACT INFORMATION OF TECTONIC ACTIVITY OF COMPLEX ALLUVIAL FAN——A CASE STUDY OF AN ALLUVIAL FAN IN THE SOUTHERN MARGIN OF BARKOL BASIN 下载免费PDF全文
下载免费PDF全文 Alluvial fans that are in the process of development always show complex geomorphic features due to natural modification. Accordingly, analyzing these fans whether to be influenced by tectonic deformation is one of the technique difficulties in active tectonic studies. Complex alluvial fans are the focus of the study of active tectonics such as fracture mapping and activity behavior analysis, for they have often retained important structural information. Traditional measurement methods, such as satellite remote sensing, RTK GPS and Lidar, are difficult to meet the demand for the study of micro tectonic deformation because of the reason of accuracy or cost performance. The recent UAV photogrammetry technology, due to its many advantages such as low cost, high resolution, and efficiency of exporting DEM and DOM data, has been widely used in three-dimensional modeling, ground mapping and other fields. In the quantitative study of active tectonics, this technology fills up the deficiency in the research of the micro structure of the traditional measurement. Through detailed field investigations and paleoseismic trenching, we further used this technology to obtain the topographic data of a complex alluvial fan located at the southern marginal fault of Barkol Basin, Xinjiang. Pointing at the alluvial fans that are in the process of development, and on the basis of topographic analysis and image processing for DEM, we take the research method of secondary partitions of the geomorphic surface and cut the alluvial fans longitudinally according to the difference of its age. Through the establishment of profile cluster within each partition, separate analysis and data contrast with the adjacent partitions, we acquired the tectonic activity information during the development of alluvial fan. The tectonic vertical deformation of this alluvial fan is about 2.5m. 相似文献
3.
NEW ACTIVITY CHARACTERISTICS AND SLIP RATE OF THE EBOMIAO FAULT IN THE SOUTHERN MARGIN OF BEISHAN,GANSU PROVINCE 下载免费PDF全文
下载免费PDF全文 ZHANG Bo HE Wen-gui LIU Bing-xu GAO Xiao-dong PANG Wei WANG Ai-guo YUAN Dao-yang 《地震地质》1979,42(2):455-471
The Ebomiao Fault is a newly discovered active fault near the block boundary between the Tibetan plateau and the Alashan Block. This fault locates in the southern margin of the Beishan Mountain, which is generally considered to be a tectonically inactive zone, and active fault and earthquake are never expected to emerge, so the discovery of this active fault challenges the traditional thoughts. As a result, studying the new activity of this fault would shed new light on the neotectonic evolution of the Beishan Mountain and tectonic interaction effects between the Tibetan plateau and the Alashan Block. Based on some mature and traditional research methods of active tectonics such as satellite image interpretation, trenches excavation, differential GPS measurement, Unmanned Aircraft Vehicle Photogrammetry(UAVP), and Optical Stimulated Luminescence(OSL)dating, we quantitatively study the new activity features of the Ebomiao Fault.
Through this study, we complete the fault geometry of the Ebomiao Fault and extend the fault eastward by 25km on the basis of the 20km-fault trace identified previously, the total length of the fault is extened to 45km, which is capable of generating magnitude 7 earthquake calculated from the empirical relationships between earthquake magnitude and fault length. The Ebomiao Fault is manifested as several segments of linear scarps on the land surface, the scarps are characterized by poor continuity because of seasonal flood erosion. Linear scarps are either north- or south-facing scarps that emerge intermittently. Fourteen differential GPS profiles show that the height of the north-facing scarps ranges from (0.22±0.02)m to (1.32±0.1)m, and seven differential GPS profiles show the height of south-facing scarps ranging from (0.33±0.1)m to (0.64±0.1)m. To clarify the causes of the linear scarps with opposite-facing directions, we dug seven trenches across these scarps, the trench profiles show that the south-dipping reverse faults dominate the north-facing scarps, the dipping angles range from 23° to 86°. However, the south-facing scarps are controlled by south-dipping normal faults with dipping angles spanning from 60° to 81°.
The Ebomiao Fault is dominated by left-lateral strike-slip activity, with a small amount of vertical-slip component. From the submeter-resolution digital elevation models(DEM)constructed by UAVP, the measured left-lateral displacement of 19 gullies in the western segment of the Ebomiao Fault are(3.8±0.5)~(105±25)m, while the height of the north-facing scarps on this segment are(0.22±0.02)~(1.32±0.10)m(L3-L7), the left-lateral displacement is much larger than the scarp height. In this segment, there are three gullies preserving typical left-lateral offsets, one gully among them preserves two levels of alluvial terraces, the terrace riser between the upper terrace and the lower terrace is clear and shows horizontal offset. Based on high-resolution DEM interpretation and displacement restoration by LaDiCaoz software, the left-lateral displacement of the terrace riser is measured to be(16.7±0.5)m. The formation time of the terrace riser is approximated by the OSL age of the upper terrace, which is (11.2±1.5)ka BP at (0.68±0.03)m beneath the surface, and(11.4±0.6)ka at (0.89±0.03)m beneath the surface, the OSL age (11.2±1.5)ka BP at (0.68±0.03)m beneath the surface is more close to the formation time of the upper terrace because of a nearer distance to sediment contact between alluvial fan and eolian sand silt. Taking the (16.7±0.5)m left-lateral displacement of the terrace riser and the upper terrace age (11.2±1.5)ka, we calculate a left-lateral strike-slip rate of(1.52±0.25)mm/a for the Ebomiao Fault. The main source for the slip rate error is that the terrace risers on both walls of the fault are not definitely corresponded. The north wall of the fault is covered by eolian sand, we can only presume the location of terrace riser by geomorphic analysis. In addition, the samples used to calculate slip rate before were collected from the aeolian sand deposits on the north side of the fault, they are not sediments of the fan terraces, so they could not accurately define the formation age of the upper terrace. This study dates the upper terrace directly on the south wall of the fault.
Since the late Cenozoic, the new activity of the Ebomiao Fault may have responded to the shear component of the relative movement between the Tibetan plateau and the Alashan Block under the macroscopic geological background of the northeastern-expanding of the Tibetan plateau. The north-facing fault scarps are dominated by south-dipping low-angle reverse faults, the emergence of this kind of faults(faults overthrusting from the Jinta Basin to the Beishan Mountain)suggests the far-field effect of block convergence between Tibetan plateau and Alashan Block, which results in the relative compression and crustal shortening. As for whether the Ebomiao Fault and Qilianshan thrust system are connected in the deep, more work is needed. 相似文献
Through this study, we complete the fault geometry of the Ebomiao Fault and extend the fault eastward by 25km on the basis of the 20km-fault trace identified previously, the total length of the fault is extened to 45km, which is capable of generating magnitude 7 earthquake calculated from the empirical relationships between earthquake magnitude and fault length. The Ebomiao Fault is manifested as several segments of linear scarps on the land surface, the scarps are characterized by poor continuity because of seasonal flood erosion. Linear scarps are either north- or south-facing scarps that emerge intermittently. Fourteen differential GPS profiles show that the height of the north-facing scarps ranges from (0.22±0.02)m to (1.32±0.1)m, and seven differential GPS profiles show the height of south-facing scarps ranging from (0.33±0.1)m to (0.64±0.1)m. To clarify the causes of the linear scarps with opposite-facing directions, we dug seven trenches across these scarps, the trench profiles show that the south-dipping reverse faults dominate the north-facing scarps, the dipping angles range from 23° to 86°. However, the south-facing scarps are controlled by south-dipping normal faults with dipping angles spanning from 60° to 81°.
The Ebomiao Fault is dominated by left-lateral strike-slip activity, with a small amount of vertical-slip component. From the submeter-resolution digital elevation models(DEM)constructed by UAVP, the measured left-lateral displacement of 19 gullies in the western segment of the Ebomiao Fault are(3.8±0.5)~(105±25)m, while the height of the north-facing scarps on this segment are(0.22±0.02)~(1.32±0.10)m(L3-L7), the left-lateral displacement is much larger than the scarp height. In this segment, there are three gullies preserving typical left-lateral offsets, one gully among them preserves two levels of alluvial terraces, the terrace riser between the upper terrace and the lower terrace is clear and shows horizontal offset. Based on high-resolution DEM interpretation and displacement restoration by LaDiCaoz software, the left-lateral displacement of the terrace riser is measured to be(16.7±0.5)m. The formation time of the terrace riser is approximated by the OSL age of the upper terrace, which is (11.2±1.5)ka BP at (0.68±0.03)m beneath the surface, and(11.4±0.6)ka at (0.89±0.03)m beneath the surface, the OSL age (11.2±1.5)ka BP at (0.68±0.03)m beneath the surface is more close to the formation time of the upper terrace because of a nearer distance to sediment contact between alluvial fan and eolian sand silt. Taking the (16.7±0.5)m left-lateral displacement of the terrace riser and the upper terrace age (11.2±1.5)ka, we calculate a left-lateral strike-slip rate of(1.52±0.25)mm/a for the Ebomiao Fault. The main source for the slip rate error is that the terrace risers on both walls of the fault are not definitely corresponded. The north wall of the fault is covered by eolian sand, we can only presume the location of terrace riser by geomorphic analysis. In addition, the samples used to calculate slip rate before were collected from the aeolian sand deposits on the north side of the fault, they are not sediments of the fan terraces, so they could not accurately define the formation age of the upper terrace. This study dates the upper terrace directly on the south wall of the fault.
Since the late Cenozoic, the new activity of the Ebomiao Fault may have responded to the shear component of the relative movement between the Tibetan plateau and the Alashan Block under the macroscopic geological background of the northeastern-expanding of the Tibetan plateau. The north-facing fault scarps are dominated by south-dipping low-angle reverse faults, the emergence of this kind of faults(faults overthrusting from the Jinta Basin to the Beishan Mountain)suggests the far-field effect of block convergence between Tibetan plateau and Alashan Block, which results in the relative compression and crustal shortening. As for whether the Ebomiao Fault and Qilianshan thrust system are connected in the deep, more work is needed. 相似文献
4.
THE DELINEATION OF THREE-DIMENSIONAL SHALLOW GEOMETRY OF ACTIVE FAULT BASED ON TLS AND GPR: A CASE STUDY OF AN NORMAL FAULT ON THE NORTH MARGIN OF MAOYABA BASIN IN LITANG,WESTERN SICHUAN PROVINCE 下载免费PDF全文
下载免费PDF全文 It is crucial to reveal the surface traces and activity of active faults by obtaining high-precision microtopography and three-dimensional shallow geometry. However, limited by the traditional geological investigation methods in the field and geological condition factors, the measurement method on microtopography and shallow geometry of active fault is badly insufficient. In this study, the TLS and GPR are firstly used comprehensively to delineate the microtopography and shallow geometry of the normal fault scarp on the north margin of Maoyaba Basin in Litang. Firstly, the vertical displacements of two landforms produced by the latest two periods of normal faulting and the two-dimensional GPR profiles are obtained separately. Secondly, the three-dimensional measurement method of active fault based on TLS and GPR is preliminarily established. On this basis, three-dimensional model of fault scarp and three-dimensional images of subsurface geometry are also obtained. These data all reveal a graben structure at normal fault scarps. Thirdly, the fusion and interpretation of three-dimensional data from the surface and subsurface are realized. The study results show:1)the vertical displacements of the T1 and T2 terraces by the normal fault movement is 1.4m and 5.7m, the GPR profile shows a typical fault structure and indicates the existence of small graben structure with a maximum width of about 40m in the shallow layer, which further proves that it is a normal fault. 2)the shallow geometry of the normal fault scarp can be more graphically displayed by the three-dimensional radar images, and it also makes the geometry structure of the fault more comprehensive. The precise location and strike of faults F1 and F2 on the horizontal surface are also determined in the three-dimensional radar images, which further proves the existence of small graben structure, indicating the extensional deformation characteristics in the subsurface of the fault scarps. Furthermore, the distribution of small graben structure on the surface and subsurface is defined more precisely. 3)the integrated display of microgeomorphology and shallow geometry of normal fault scarp is realized based on the three-dimensional point cloud and GPR data. The fusion of the point cloud and GPR data has obvious advantages, for the spatial structure, morphological and spectral features from the point cloud can improve the recognition and interpretation accuracy of GPR images. The interpreted results of the GPR profiles could minimize the transformation of the surface topography by the external environment at the most extent, restore the original geomorphology, relocate the position and trend of faults on the surface and constrain the width of deformation zones under the surface, the geological structure, and the fault dislocation, etc.
In a word, the TLS and GPR can quickly and efficiently provide the spatial data with multi-level and multi-visual for non-destructive inspection of the microgeomorphology and shallow structure for the active fault in a wide range, and for the detection of active fault in the complex geological environments, and it is helpful to improve the accuracy and understanding of the investigation and research on microtopography and shallow geometry of active faults. What's more, it also offers important data and method for more comprehensive identification and understanding of the distribution, deformation features, the behaviors of active faults and multi-period paleoseismicity. Therefore, to continuously explore and improve this method will significantly enhance and expand the practicability and application prospects of the method in the quantitative and elaborate studies of active faults. 相似文献
5.
USING STEREO-PAIR AND DIFFERENTIAL GPS TO REVEAL SURFACE DEFORMATION CHARACTERISTICS OF THE MINLE-YONGCHANG FAULT 下载免费PDF全文
下载免费PDF全文 ZOU Xiao-bo YUAN Dao-yang SHAO Yan-xiu LIU Xing-wang ZHANG Bo YANG Hai-bo 《地震地质》2017,39(6):1198-1212
Qilian Shan-Hexi Corridor is located in the northeastern margin of the Tibetan plateau, which hosts many active strike-slip and thrust faults as well as folds. Previous study on this area was mostly concerned with large faults at the boundary of the corridor, while rare work on active tectonics in the interior of the corridor. On 25 October 2003, the Minle-Shandan MS6.1 earthquake occurred in this area, which is related with the Minle-Yongchang fault hidden beneath the south piedmont of the Dahuangshan Mountains. As there is no obvious rupture trace on the surface, the quantitative study of this fault has never been reported so far.
In order to obtain quantitative parameters of this active structure efficiently, the software of ERDAS was used to generate pointscloud data from SPOT6 stereo-pair. Two-meter resolution DEM imagery from point cloud has the line accuracy of height about 1m. Three swath profiles were extracted from the DEM data, which show that high geomorphic surfaces are all uplifted and folded. By differential GPS measurement, the vertical uplift of the thrust-related fold is estimated to be about 2.0m on the T2, and the strike of the fold deformation is nearly 311°, which is close to the result of the fault parameter determined by aftershocks, and also in agreement with the focal mechanism solutions. Furthermore, the location of fold axial zone is consistent with the actual investigation data. These indicate that there is obvious tectonic deformation in the west part of the Minle-Yongchang fault. It supports the view that this fault is the seismogenic structure of the 2003 Minle-Shandan earthquake. Stereo-pair is of high importance in active tectonics research, which can provide significant guidance for field geologic investigations and determining the location of tectonic deformation, according to this research. 相似文献
6.
祁漫塔格北缘断裂处于青藏高原内部造山带地区,其构造活动反映了青藏高原的构造演化特征。本文采用活动构造和构造地貌相结合的研究方法,对该断裂的活动性进行初步分析研究。首先采用航卫片解译和野外调查,发现该断裂断错了山前全新世冲洪积扇,形成的断层陡坎高度在1.5~2.5m。通过扩散方程,并参考前人研究结果,认为祁漫塔格北缘断裂晚第四纪的抬升速率初步限定在1~2mm/a。我们基于数字高程模型提取的地形高程纵剖面和面积-高程积分,其结果也支持祁漫塔格北缘存在构造活动。 相似文献
7.
INTERPRETATION AND ANALYSIS OF THE FINE FAULT GEO-METRY BASED ON HIGH-RESOLUTION DEM DATA DERIVED FROM UAV PHOTOGRAMMETRIC TECHNIQUE: A CASE STUDY OF TANGJIAPO SITE ON THE HAIYUAN FAULT 下载免费PDF全文
下载免费PDF全文 Fault-related tectonic geomorphologic features are integrated expressions of multiple strong seismological events and long-term surface processes, including crucial information about strong earthquake behavior of a fault. It's of great significance to identify the strong seismic activity information from faulted landscapes, which include the date and sequence of the seismic activities, displacements, active fault features, for studying the seismic rupture process, predicting the future seismic recurrence behavior and evaluating the seismic hazard of the fault.
However, due to the restriction of measuring techniques and the subsequent poor quality of the acquired data, it has been difficult to accurately extract such information from complex tectonic landforms to study active faults for a long time. Recently, "small Unmanned Aerial Vehicle(sUAV)" photogrammetric technique based on "Structure from Motion(SfM)" provides a cost-efficient and convenient access to high-resolution and high-accuracy "digital elevation models(DEMs)" of tectonic landforms.
This paper selects the Tangjiapo area at the Haiyuan Fault to conduct data collection, in which the structural and geomorphic features are well preserved. Using a small quadrotor unmanned aerial vehicle(Inpire 2), we collect 1598 aerial photographs with a coverage area of 0.72km2. For calibrating the accuracy of the aerial data, we set 10 ground control points and use differential-GPS to obtain the spatial coordinates of these control points. We use model software Agisoft PhotoScan to process these digital pictures, obtaining high-resolution and high-accuracy DEM data with the geographic information, in which data resolution is 2.6cm/pix and the average density of point cloud is 89.3 point/m2. The data with these accuracy and resolution can fully show the real geomorphic features of the landform and meet the requirements for extracting specific structural geomorphic information on the surface.
Through the detailed interpretation of the tectonic landforms, we identify a series of structures associated with the strike-slip fault and divide the alluvial fan into four stages, named s1, s2, s3, and s4, respectively.Wherein, the s1 is the latest phase of the alluvial fan, which is in the extension direction of the Haiyuan Fault and there isn't any surface fracture, indicating that the s1 was formed after the M8.5 Haiyuan earthquake in 1920. The rupture zone on the s2 fan is composed of varied kinds of faulting geomorphologic landforms, such as a series of en echelon tension-shear fractures trending 270°~285°, fault scarps and seismic ridges caused by the left-lateral motion of the seismic fault. In addition, a number of field ridges on the s2 fan were faulted by the 1920 Haiyuan M8.5 earthquake, recording the co-seismic displacements of the latest earthquake event. Relatively speaking, the surface rupture structure of the s3 fan is simple, mainly manifested as linear fault scarp with a trend of 270°~285°, which may indicate that multiple earthquakes have connected the different secondary fractures. And a small part of s4 fan is distributed in the southwest of the study area without fault crossing.
Furthermore, we measured the horizontal displacements of river channels and vertical offsets of fault scarps. The faulted ridge on the s2 fan and faulted gully on the s3 fan provide good linear markers for obtaining the fault left-lateral dislocation. We used the graphical dislocation measurement software LaDiCaoz developed based on Matlab to restore the gully position before the earthquake by comparing the gully morphology on both sides of the fault, and then determined the horizontal offset of s2, which is(4.3±0.4)m and that of s3 is(8.6±0.6)m. In addition, based on the DEM data, we extracted the fault scarp densely along the fault strike, and obtained the vertical offset of s2, which is(4.3±0.4)m and that of s3 is(1.79±0.16)m.
Moreover, we detect slope breaks in the fault scarp morphology. For compound fault scarps generated by multiple surface rupture earthquakes, there are multiple inflection points on the slope of the topographic section, and each inflection point represents a surface rupture event. Therefore, the slope break point on the scarp becomes an important symbol of multiple rupture of the fault. The statistical result shows that the slope breaks number of s2 is 1 and that of s3 is 2. Based on the analysis of horizontal displacements of river channels and vertical offsets of fault scarps as well as its slope breaks, two surface rupturing events can be confirmed along the Tangjiapo area of the Haiyuan Fault. Among them, the horizontal and vertical displacements of the older event are(4.3±0.95)m and(0.85±0.22)m, respectively, while that of the latest event are(4.3±0.4)m and(0.95±0.14)m, which are the coseismic horizontal and vertical offsets of the 1920 Haiyuan earthquake.
These recognitions have improved our cognitive level of the fine structure of seismic surface rupture and ability to recognize paleoearthquake events. Therefore, the high-resolution topographic data obtained from the SfM photogrammetry method can be used for interpretation of fine structure and quantitative analysis of microgeomorphology. With the development of research on tectonic geomorphology and active tectonics toward refinement and quantification, this method will be of higher use value and practical significance. 相似文献
8.
断层陡坎的形态可以保存有关断层带上地震活动等重要信息,陡坎上的坡折就是多次地震发生后陡坎演化留下的微地貌信息。以往研究选取的断层陡坎多为位于标准阶地面上的断层陡坎,而断层沿线地貌现象复杂,因此需要探索一种具有普适性的断层陡坎形态研究方法。本研究将常见的断层陡坎剖面按照形态划分为三种类型,以LiDAR技术获取的0.2m分辨率DEM数据为基础,选择了8个属于不同断层陡坎剖面类型的实验区,每个实验区采集不少于20条剖面,通过窗口检验确定研究区最佳数据获取移动窗口为7个像元并计算每条剖面的坡度值,通过坡度约束限定陡坎范围,进而识别坡折并获取坡折信息。对坡折信息进行概率密度统计,根据概率密度统计图中的峰值个数确定强震事件的次数。结果显示,陡坎形态研究结果与古地震探槽结果表现出较好的一致性,表明本文提出的陡坎形态研究方法可以适用于不同类型断层陡坎来确定强震事件次数。 相似文献
9.
AI Ming BI Hai-yun ZHENG Wen-jun YIN Jin-hui YUAN Dao-yang REN Zhi-kun CHEN Gan LIU Jin-rui 《地震地质》2018,40(6):1276-1293
With the development of photogrammetry technology and the popularity of unmanned aerial vehicles (UAVs)technology in recent years, using UAV photogrammetry technology to rapidly acquire high precision and high resolution topographic and geomorphic data on the fault zone has gradually become an important technical means. This paper first summarizes the basic principle and workflow of a new digital photogrammetry technology, SfM (Structure from Motion), which is simple, efficient and low cost. Using this technology, we conducted aerial image acquisition and data processing for a typical fault landform on the northern of Caka Basin in Qinghai. The digital elevation model (DEM)with 6.1cm/pix resolution is generated and the density of point cloud is as high as 273 points/m2. The coverage area is 0.463km2. Further, the terrain and slope data parallel to the fault direction are extracted by topographic analysis method, and combined with the contour map and the slope diagram generated by the DEM, a fine interpretation and quantitative study of complex multilevel geomorphic surfaces is carried out. Finally, based on the results of sophisticated interpretation of geomorphology, we got the vertical displacements of the T1 terrace to the T3 terrace as (1.01±0.06)m, (1.37±0.13)m and (3.10±0.11)m, and the minimum vertical displacements of the T4 terrace and the T5 terrace as (3.77±0.14)m and (5.46±0.26)m, respectively, through the topographic profile data extracted by DEM. Such vertical displacement parameters are difficult to obtain directly by traditional remote sensing images, which shows the great application prospect of UAV photogrammetry technology in the quantitative study of active tectonics. 相似文献
10.
11.
昌马盆地为祁连山西端的山间盆地，前人一直关注其周边断裂(如昌马断裂)的构造变形，盆地内部变形则鲜有研究。基于遥感解译和野外考察、探槽开挖、差分GPS和放射性碳(14C)测年等方法，发现昌马盆地西北部的一条活动断层。断层长约4 km,总体走向NEE,倾向SE,倾角陡立，断层地貌表现为陡坎、复陡坎、断层沟槽等，陡坎高度0～5.6 m,由WS向NE逐渐增大。断层运动性质以正断为主，最新活动时代为全新世，并识别出2期古地震事件：6 670～6 885 a B.P.和26 330～26 915 a B.P.。研究结果表明，在青藏高原东北缘向NE方向挤压扩展的背景下，祁连山造山带发生NW-SE向伸展，导致其西端受到SE向拉张作用而形成正断层。 相似文献
12.
《震灾防御技术》2022,17(4):701-709
无人机测量具有高清晰度、大比例尺、小面积、高现势性的优点,为地貌参数获取提供更准确可靠的活动构造定量参数,克服传统测量方法工作量大、效率低、受自然条件限制等缺点,可提供厘米级定位数据,从而显著提升图像元数据的绝对精度。利用大疆精灵4 RTK小型多旋翼高精度航测无人机,获取昆中断裂（巴隆-温泉段）在龙通村北的高精度DEM地貌数据,通过对微地貌的提取,初步确定断裂在该处的水平位错量为2.1～15.4 m。分析获取的8条陡坎剖面,认为其中5条陡坎形成后受到水流侵蚀作用较小,陡坎高度基本相似,断裂实际垂直位错量为0.6～0.9 m。研究结果表明,无人机航测技术是识别复杂地貌构造信息并提取相关活动构造参数的有效手段,可为断裂的定量研究提供可靠的数据基础。 相似文献
13.
The integration of terrain computer modeling with field methods may provide a powerful mechanism for understanding active faults geometry, kinematics and long-term fault behavior. Radar interferometry was used on ERS tandem images to create a geocoded DEM (InSAR-DEM) with a nominal 20-m spatial-resolution of the central Apennines axial zone, a seismically active area characterized by historical destructive earthquakes with M 7. The potential was tested of InSAR-DEM application to the Fucino and Sulmona basin boundary faults, which have well-defined seismological, paleoseismological and/or geological evidence for their having seismogenic sources. In particular, slope maps extracted from the InSAR-DEM were used for fault scarps detection, whether on carbonate bedrock (fault scarp type 2) or affecting continental deposits within the basin (fault scarp type 1), and compared with the available geological and new field data. In order to assess the DEM accuracy and to evaluate morphometric parameters related to the long-term slip-rates of the faults, a set of topographic profiles was extracted from the InSAR-DEM and compared with analogous profiles derived from the available topographic map (i.e., 1/25,000, with 25 m contour interval). In particular, the use of InSAR-DEM analyses showed its better results, with respect to the standard topography, for urban/agricultural gently sloped areas where fault scarps affected unconsolidated and particularly soft sediments (e.g., Fucino basin fault systems), while in severely sloped carbonate ridge and forested areas low coherences and layover effects made InSAR-DEM application problematic. A maximum value of 1.1 ± 0.2 mm yr–1 slip-rate was obtained for the Fucino boundary fault. Finally, the recognized en-échelon pattern of the Sulmona basin boundary fault, provided a segmentation model for this structure corroborated by geological-structural field data. 相似文献
14.
THE COSEISMIC VERTICAL DISPLACEMENTS OF SURFACE RUPTURE ZONE OF THE 1556 HUAXIAN EARTHQUAKE 下载免费PDF全文
下载免费PDF全文 Coseismic displacement plays a role in earthquake surface rupture, which not only reflects the magnitude scale but also has effect on estimates of fault slip rate and earthquake recurrence intervals. A great historical earthquake occurred in Huaxian County on the 23rd January 1556, however, there was lack of surface rupture records and precise coseismic vertical displacements. It's known that the 1556 Huaxian earthquake was caused by Huashan front fault and Weinan plateau front fault, which are large normal faults in the east part of the southern boundary faults in Weihe Basin controlling the development of the basin in Quaternary. Here, we made a study on three drilling sites in order to unveil the coseismic vertical displacements.
It is for the first time to get the accurate coseismic vertical displacements, which is 6m at Lijiapo site of Huashan front fault, 7m at Caiguocun site, and 6m at Guadicun site of Weinan plateau front fault. These coseismic displacements measured based on same layers of drilling profiles both at footwall and hanging wall are different from the results measured by former geomorphological fault scarps. It's estimated that some scarps are related with the nature reformation and the human beings' activities, for example, fluviation or terracing field, instead of earthquake acticity, which leads to some misjudgment on earthquake displacements. Moreover, the vertical displacements from the measurement of geomorphological scarps alone do not always agree with the virtual ones. Hence, we assume that the inconsistency between the results from drilling profiles and geomorphological scarps in this case demonstrates that the fault scarp surface may have been demolished and rebuilt by erosion or human activities. 相似文献
15.
QUANTITATIVE STUDY OF FAULT ACTIVITY BASED ON HIGH-PRECISION AIRBORNE LiDAR DATA: A CASE OF XIAOHONGSHAN FAULT IN XIANGSHAN-TIANJINGSHAN FAULT ZONE 下载免费PDF全文
下载免费PDF全文 High-precision and high-resolution topography are the basis of quantitative study of active tectonics. Traditional methods are mainly interpreted from the remote sensing image and can only obtain two-dimensional, medium-resolution DEM(5~10m grid unit)or local three-dimensional surface deformation characteristics. A combination of offset and micro-relief information is essential for understanding the long-term rupture pattern of faults, such as in seismic hazard evaluation. The recently developed high-resolution light detection and ranging(LiDAR)technology can directly carry out high-precision and omni-directional three-dimensional measurement of the landform, and provide fine geomorphologic data for the study of active tectonics, which is helpful to deepen the understanding of surface rupture process and fault activity characteristics. In this study, we take part of the Xiaohongshan Fault, the western segment of Xiangshan-Tianjingshan Fault located in Gansu Province(NE Tibet), as an example of how LiDAR data may be used to improve the study of active faults. Using the airborne LiDAR technology, we obtain the three-dimensional surface deformation characteristics with high accuracy and establish the three-dimensional topographic model of the fault geomorphic. A high-resolution digital elevation model(DEM)of the Jingtai-Xiaohongshan Fault was extracted based on high-precision LiDAR data. Then the faulted geomorphic markers(gullies, ridges and terraces)were measured in detail along the fault, and different offset clusters and long-term sliding vector of different segments of the fault were finally acquired. We obtained the 82 horizontal displacements and 62 vertical displacements of geomorphic markers. According to the offset amounts, we observed peaks in the histogram by using the method of cumulative offset probability density and interpreted that each peak may represent an earthquake that ruptured the Xiaohongshan Fault. The results show that the horizontal and vertical displacements fall into five clusters, and the smallest cluster may indicate the coseismic slip of the most recent earthquake, while the other clusters may represent the slip accumulation of multiple preceding earthquakes. The sliding vectors constrained by the horizontal and vertical displacement of several typical geomorphic markers show obvious differences on different segments of the fault. The results show that the fault segment is divided into three segments from west to east, which indicates that the fault activity is not uniform along the fault. 相似文献
16.
根据对北京平谷三河地区地表陡坎的观察比较,研究了河流侵蚀陡坎与断层陡坎的微地貌形态差异。河流侵蚀形成陡坎的方向追随河流的冲沟方向,具不稳定性,并且陡坎的倾向沿河对称。断层陡坎的展布不受河流方向的影响,断层以倾向活动为主时,陡坎两盘的运动方向稳定。研究结果表明,平谷地区的地表陡坎是河流侵蚀陡坎。同时,还从构造地貌学与地层沉积学的角度,分析了平原区河流侵蚀沉积与断层断错沉积的特征,指出平谷地区的浅层人工地震探测及浅钻资料存在两种解释的可能性 相似文献
17.
褶皱陡坎中相关断层在缩短量计算中的作用——以东秋里塔格背斜为例 总被引：1，自引：1，他引：0
通过对东秋里塔格背斜地区内与褶皱陡坎伴生的次级断层进行的地质调查,确定了该次级断层属于伸出向斜的逆冲断层,也给出了次级断层的发生时间晚于褶皱作用起始时间的1个变形实例。褶皱陡坎中发育的次级断层使得陡坎上盘地层沿断层面整体向上迁移,不仅次级断层使得阶地面发生掀斜并增大褶皱陡坎的坡度,而且直接影响了区域缩短增量计算的真实性。计算结果显示,当不考虑次级断层对褶皱陡坎高度的影响时,计算所得缩短增量为51.42m,考虑次级断层对褶皱陡坎高度的影响时,计算得到的地壳缩短量为45.23m。二者相差6.19m,偏差占总缩短增量的13.7%,是一个不可忽视的量值。东秋里塔格背斜北翼和南翼的褶皱陡坎发育于相同岩性的基岩中而且具有相同的形成机制。但是背斜北翼在水平距离不足300m的范围内发育了3级褶皱陡坎,这表明北翼相对于南翼,其活动枢纽带更为紧闭。这是由于北翼存在更加强烈的挤压应力及更加快速的隆升作用。因此,次级断层的研究对于正确认识区域构造演化、了解褶皱与断层相互作用关系具有重要意义。但是仍存在很多问题:1)受观察剖面范围有限、次级断层分布不连续和断距沿延伸方向不断增大等因素的制约,次级断层对缩短增量造成的影响可能被低估,计算结果应为缩短量的最小值。2)次级断层增加的陡坎高度与断层的断距、倾角具有怎样的定量关系?3)若次级断层只发育于活动枢纽带内,又会产生怎样的影响?这些问题还需更多的研究实例来进行更加深入的研究。 相似文献
18.
通过卫星影像解译、野外实地调查并结合前人研究成果,对位于祁连山北缘的玉门—北大河断裂晚第四纪构造活动特征进行研究。结果表明,玉门—北大河断裂为一条全新世活动的逆冲断裂,该断裂西起玉门青草湾,向东经老玉门市、大红泉止于骨头泉,全长约80km,整体走向NWW。根据断裂的几何结构及活动习性可将其分为三段:东段构造形态简单连续,为逆冲断层陡坎为主的古地震地表破裂带;中段结构复杂,由多条次级断层组成,以逆冲扩展为主;西段未出露地表而成为盲断裂-褶皱带。通过对断层陡坎差分GPS测量及相应地貌面年代测试,得到断裂晚更新世以来逆冲速率约为(0.73±0.09)mm/a。 相似文献
19.
焉耆盆地是一个位于天山东南部的山间盆地 ,在遥感图像上 ,可以看到盆地西面的活动构造在地表留下的痕迹 :清楚的线形构造 ,被错开的水系、冲沟等。经分析认为 ,这些活动构造主要由北边的活动褶皱和南边的右行走滑活动断裂组成。野外的实际调查与图像分析的结果十分吻合 ,表明遥感图像在研究活动构造方面是一个十分有力和快速的工具。活动断层的最大水平位移为 2 10m ,最大垂直位移为 2 0m ,主要以走滑作用为主。天山地区活动构造的发育表明印度板块向欧亚板块的碰撞仍在持续 相似文献
20.
FAULTED LANDFORM AND SLIP RATE OF THE JINGHE SECTION OF THE BOLOKENU-AQIKEKUDUKE FAULT SINCE THE LATE PLEISTOCENE 下载免费PDF全文
下载免费PDF全文 The Bolokonu-Aqikekuduke fault zone(Bo-A Fault)is the plate convergence boundary between the middle and the northern Tianshan. Bo-A Fault is an inherited right-lateral strike-slip active fault and obliquely cuts the Tianshan Mountains to the northwest. Accurately constrained fault activity and slip rate is crucial for understanding the tectonic deformation mechanism, strain rate distribution and regional seismic hazard. Based on the interpretation of satellite remote sensing images and topographic surveys, this paper divides the alluvial fans in the southeast of Jinghe River into four phases, Fan1, Fan2, Fan3 and Fan4 by geomorphological elevation, water density, depth of cut, etc. This paper interprets gullies and terrace scarps by high-resolution LiDAR topographic data. Right-laterally offset gullies, fault scarps and terrace scarps are distributed in Fan1, Fan2b and Fan3. We have identified a total of 30 right-laterally offset gullies and terrace scarps. Minimum right-lateral displacement is about 6m and the maximum right-lateral displacements are(414±10)m, (91±5)m and(39±1)m on Fan2b, Fan3a and Fan3b. The landform scarp dividing Fan2b and Fan3a is offset right-laterally by (212±11)m. Combining the work done by the predecessors in the northern foothills of the Tianshan Mountains with Guliya ice core climate curve, this paper concludes that the undercut age of alluvial fan are 56~64ka, 35~41ka, 10~14ka in the Tianshan Mountains. The slip rate of Bo-A Fault since the formation of the Fan2b, Fan3a and Fan3b of the alluvial-proluvial fan is 3.3~3.7mm/a, 2.2~2.6mm/a and 2.7~3.9mm/a. The right-lateral strike-slip rate since the late Pleistocene is obtained to be 3.1±0.3mm/a based on high-resolution LiDAR topographic data and Monte Carlo analysis. 相似文献