共查询到20条相似文献，搜索用时 203 毫秒
1.
快速Fourier变换波动方程基准面校正方法研究 总被引：4，自引：1，他引：3
当地表起伏剧烈、近地表速度横向变化较大时,基于地表一致性假设的常规静校正方法存在着较大误差.波动方程基准面静校正方法能很好地解决起伏地表和复杂近地表结构问题,但计算量巨大,特别是三维波动方程基准面校正,适应横向任意速度变化、计算精度较高的有限差分或其混合的方法波动方程基准面校正涉及海量的计算和存储操作.为了提高波动方程基准面校正的计算效率,本文研究一类只用快速Fourier变换(FFT)实施波动方程基准面校正的方法,采用相移(PS)、分裂步(SSF)和一阶退化(DP1)三种具有相同算法结构、但不同计算效率、适应不同地表复杂程度的Fourier变换延拓算子.PS和SSF算子只适应于速度横向变化较弱的起伏地表;DP1通过在两个分裂步之间作波数域线性插值来实现波场延拓,将常规的SSF算法推广适应强速度横向变化介质和大角度传播波场.本文着重比较了基于这三种延拓算子的逐层延拓累加波动方程基准面校正方法对地表起伏和近地表速度横向变化的适应能力和计算效率,给出了一个相对定量的评估,以便针对不同的地表复杂程度合理选择合适的FFT波动方程基准面校正方法,既满足了精度又提高了计算效率. 相似文献
2.
波动方程基准面校正处理被认为是当地表高程变化剧烈、地表一致性假设又不成立的情况下对于常规高程基准面校正的必要替代. 在二维波动方程基准面校正方面，前人已经作了大量工作，并且在实际应用中获得了良好的效果，应该将其进一步推广到三维. 本文采用三维频率空间域有限差分波场延拓算子以“逐步－累加”的方式实现了三维波动方程基准面校正，并对实际数据进行了处理. 对于西部某三维数据的实际计算结果表明，相对于传统的模型法高程静校正，波动方程基准面校正更合理地实现了基准面校正，有助于提高后续的速度分析精度和成像质量. 相似文献
3.
常规的转换波静校正的基本思想都是从地震波的运动学特征出发,基于地表一致性假设.在地表条件复杂和地表高程相差较大的地区,它不仅无法解决严重的静校正问题,反而会带来新的畸变.本文基于频率波数域波动方程偏移原理,采用波场延拓方法实现转换波静校正,其关键点在于时间空间域和频率波数域的相对应.文中通过坐标变换将起伏地表转化为新坐标系下的水平地表,把炮点和检波点映射到同一水平面上,然后在新坐标系下推导频率域波动方程延拓公式,接着对下行波P和上行转换波SV分别利用近地表速度向上延拓到基准面,恢复起伏地表到基准面之间的真实波场,最后转换到原始坐标系取出基准面数据完成转换波静校正.通过对模拟和实际数据处理,证明该方法是正确和有效的. 相似文献
4.
浅层地震反射法是一种常用的勘探方法.在浅层地震资料处理中,静校正的精度直接影响速度反演的结果和叠加剖面的质量,在地形平缓时,固定基准面静校正可以满足勘探精度的要求,但在复杂地形条件下,其存在较大误差,即使采用浮动基准面,仍会由于地表一致性假设而残余静校正量,不能消除地形起伏引起的影响,为了提高浅层地震反射静校正的精度必须在常规静校正后进行一次剩余静校正,本文给出起伏地形条件下,滑动基准面(过共中心点的水平面即为该共中心点的滑动基准面)的剩余静校正量,该校正量与炮检距、反射层埋深、地层波速以及炮点和接收点高程有关,适用于单一介质和层状介质情况,本文通过对典型地形起伏的3个水平均匀层状介质理论地质模型的速度谱计算和分析,阐明在复杂地形条件下,应用本文提出的剩余静校正方法可以消除地形起伏的影响,提高静校正精度,在此基础上做动校正可以得到高质量的水平叠加剖面. 相似文献
5.
6.
7.
波动方程基准面延拓研究进展 总被引：5，自引：3，他引：2
复杂的地表采集条件是地震偏移成像必须面对的问题．地形高程起伏变化较大,以及近地表低速层速度的横向变化,是导致反射地震数据非双曲时差特征的主要原因,严重影响了后续速度估计和偏移成像的精度．对于复杂地表条件,基于地表一致性的时移法静校正很难满足高精度资料处理的要求．波动方程基准面延拓方法不受地表一致性限制,很好地保持了波传播的动力学特征,而且在改善成像质量方面效果显著,应用广泛．本文探讨了消除地表因素影响的基准面延拓方法,对一些意义比较突出的方法进行了详细介绍． 相似文献
8.
9.
本文提出了一种基于双平方根算子的共炮检距道集波动方程保幅叠前深度偏移方法,将振幅误差补偿作为偏移的一部分与“运动学偏移”一起在偏移过程中实现.其基本内容包括：(1)从保幅的单平方根算子方程出发,推导出由双平方根算子定义的保幅单程波方程;(2)根据地震波摄动理论把速度场分裂为层内常速背景和变速扰动,分别在频率－波数域和频率－空间域求得波场深度延拓的偏移时移量及振幅校正系数,从而得到最终的DSR保幅波场延拓算子;(3)在高频假设条件下,把DSR保幅波场延拓公式中的积分运算进行稳相近似,得到保幅波场延拓的相移公式.理论分析和模型数值试验表明,该方法不但可以使散射能量聚焦、归位,提高成像精度;而且可以输出正确反映地下反射系数的振幅信息,为后续的地震属性分析（如AVO/AVA）提供更真实的地震信息. 相似文献
10.
传统的剩余校正（RMO）偏移速度分析方法基于走时原理,在陡倾角和欠照明地区,因为不能得到充分的角度域信息而失效.本文将展示一种基于波场延拓理论的偏移速度分析方法,即波动方程偏移速度分析（WEMVA）.这种方法先利用成像优化方法获得剩余成像,再利用剩余成像反演剩余速度.此类方法继承了波动方程偏移方法的优点和缺点.波动方程偏移速度分析是一种线性反演方法,它要求对Born近似的展开序列作一阶截断.高阶部分的丢失必然带来巨大的截断误差,因此剩余成像必须也进行线性化,以适应大速度扰动和大延拓步长.因此,在此类算法中,剩余成像的获取和线性化是偏移速度分析的关键.在叠前偏移算子中,因为双平方根算子的数学表达式更为简洁,所以本文基于对波动方程偏移速度分析初步讨论,并通过模型验证其原理. 相似文献
11.
We apply a redatuming methodology, designed to handle rugged topography and the presence of high‐velocity layers near the acquisition surface, to a 2D land seismic data set acquired in Saudi Arabia. This methodology is based on a recently developed prestack operator, which we call the topographic datuming operator (TDO). The TDO, unlike static corrections, allows for the movement of reflections laterally with respect to their true locations, corresponding to the new datum level. Thus, it mitigates mispositioning of events and velocity bias introduced by the assumption of surface consistency and the time‐invariant time shifts brought about by static corrections. Using the shallow velocities estimated from refracted events, the TDO provides a superior continuity of reflections and better focusing than that obtained from conventional static corrections in most parts of the processed 2D line. The computational cost of applying the TDO is only slightly higher than static corrections. The marginal additional computational cost and the possibility of estimating, after TDO redatuming, stacking velocities that are not affected by a spurious positive bias, as in the case of static corrections, are further advantages of the proposed methodology. The likelihood of strong heterogeneities in the most complex part of the line limits the applicability of any approach based upon geometrical optics; however, the TDO produces results that are slightly better than those obtained from static corrections because of its ability to partially collapse diffractions generated in the near surface. 相似文献
12.
A least squares estimation procedure is used to estimate the pulse-shape, amplitude function, and arrival time of multiple reflected signals. The estimates of the multiple reflections are subtracted from the data which are subsequently processed by standard methods. The estimation algorithm is applied continuously along the seismic line for each shot point or common datum point. In some cases it is advantageous to apply a pulse-shaping filter prior to using the estimation algorithm. The effectiveness of the technique is demonstrated by studying common shot point gathers, velocity analyses, and stacked sections derived from field data. 相似文献
13.
虚拟偏移距偏移(POM)是一种新的转换波叠前时间偏移方法,是对等效偏移距偏移(EOM) 的一种改进,它与EOM方法映射方式上虽然不同, 但本质都是相同的,都是将原始输入道集映射成为共转换散射点道集。本文主要介绍了两种偏移方法的原理,通过理论模型来验证两种方法对模型参数的敏感性。在远偏移距情况下,为了能在速度分析中得到更精确的偏移速度,分别用小排列拟合的双曲线公式、三阶近似式、双平方根旅行时公式对映射后的POM道集做动校正,从而验证了三个公式的精度。最后用POM方法对复杂构造进行了叠前时间偏移。 相似文献
14.
海洋深度基准作为海洋深度起算的垂直基准，对海洋大地测量、海洋物理调查等科研活动具有重要意义.鉴于传统的海洋深度基准面存在离散、非连续等缺陷，本文开展了基于潮波运动三维数值模拟的海洋连续深度基准面构建方法研究.研究结果显示，本文采用的有限体积的海岸海洋三维潮波运动模式FVCOM，具有构建三角格网灵活，可精确适用于不规则海岸边界的特点，并在地形特征较典型区域——长江口南支水域为实验区，开展了三维潮波运动的数值模拟.模拟所得各个格网节点处的平均潮差较好地符合了当地潮汐动力作用变化的规律，并以平均潮差为基础进一步建立了连续深度基准面，同南支区域6个已知深度基准的长期验潮站相比，深度基准面最大差值为5.5 cm，差值绝对值均值为2.6 cm，模拟结果内符合精度较高；且整个模拟所得的南支深度基准面的变化规律更符合长江口南支的潮汐变化特征.本文思想为海洋连续垂直基准的建立提供了一种新的思路，相比较于传统的几何插值拟合法，本文方法更具合理性和可靠性. 相似文献
15.
16.
C.J. Thomson 《Geophysical Prospecting》2012,60(1):64-92
The reflection operator for a simple flat‐lying interface can be thought of as the set of all its plane‐wave reflection coefficients or as the set of virtual surveys with sources and receivers along the interface. When there is dip, however, it is necessary to include the varying effects of propagation between the virtual‐survey level and the interface. Hence, step one in this paper is to derive the reflection operator for a dipping plane interface as observed at a datum level some distance away. The key assumption is that the aperture at the datum level is sufficient to characterize the reflector properties around a particular point. This translates into an assumption that the dip is moderate, though no explicit small‐angle approximation is required. The second step is to find the apparent reflection operator that would relate data that have been extrapolated from the datum towards and possibly beyond the reflector using an assumed migration velocity. This apparent reflection operator is closely related to extended common‐image gathers. The apparent reflection operator may be analysed asymptotically in terms of rays and other signals, shedding light on the structure of extended image gathers. In keeping with the virtual‐survey idea, the results are considered in a subsurface space‐time or slowness‐time domain at various extrapolation levels around the interface. An important distinction is drawn between using subsurface midpoint‐offset coordinates and the wavefield coordinates of the incident and reflected waves. The latter reveal more clearly the effects of dip, because they lead to a more asymmetric apparent reflection operator. Properties such as an up‐dip shift of a traveltime minimum and its associated curvature theoretically provide information about the reflector location and dip and the migration‐velocity error. The space‐time form of the reflection operator can be highly intricate around the offset‐time origin and it was described for a simple flat interface in a background paper. To avoid a layer of mathematics, the reflection‐operator formulas presented here are in the intermediate space‐frequency domain. They are analysed by considering their stationary‐phase and branch‐point high‐frequency contributions. There is no Born‐like assumption of weak reflector contrast and so wide‐angle, total reflection and head‐wave effects are included. Snell’s law is an explicit part of the theory. It is hoped that the work will therefore be a step towards the goal of unifying amplitude‐versus‐offset, imaging and waveform inversion. 相似文献
17.
High angle prestack depth migration with absorption compensation 总被引：3，自引：0，他引：3
The absorption effect of actual subsurface media can weaken wavefield energy, decrease the dominating frequency, and further lead to reduced resolution. In migration, some actions can be taken to compensate for the absorption effect and enhance the resolution. In this paper, we derive a one-way wave equation with an attenuation term based on the timespace domain high angle one-way wave equation. A complicated geological model is then designed and synthetic shot gathers are simulated with acoustic wave equations without and with an absorbing term. The derived one-way wave equation is applied to the migration of the synthetic gathers without and with attenuation compensation for the simulated shot gathers. Three migration profiles are obtained. The first and second profiles are from the shot gathers without and with attenuation using the migration method without compensation, the third one is from the shot gathers with attenuation using the migration method with compensation. The first and third profiles are almost the same, and the second profile is different from the others below the absorptive layers. The amplitudes of the interfaces below the absorptive layers are weak because of their absorption. This method is also applied to field data. It is concluded from the migration examples that the migration method discussed in this paper is feasible. 相似文献
18.
19.
静校正问题是地震勘探的关键问题，直接影响地震勘探精度和准确性.实际地震采集过程中，当在相同接收点位置上不同时间内插拔布设了不同的检波器时，对于目前基于地表一致性理论假设的基准面静校正和剩余静校正，以及非地表一致性剩余静校正都不具备适用条件.为解决这一问题，本文提出了基于共姿态道集的静校正方法，将相同接收点位置上不同时间布设的检波点所接收的地震数据抽成不同的共姿态道集，在共姿态道集内实施地表一致性静校正；当某接收点位置上具有若干个共姿态道集时，该接收点位置上可能会存在多个检波点静校量；炮点静校问题仍然采用地表一致性静校正方法解决.该方法解决了同一接收点位置上不同共姿态道集之间的非地表一致性静校正问题，同时也解决了全区的检波点和炮点的地表一致性静校正问题，在实际数据应用效果明显. 相似文献
20.
PP波和PS波联合反演方法作为有效的地震技术,比单纯纵波反演精度要高,能够提高地震储层识别的精度.以Russell近似理论为基础,推导了新的转换波AVO近似公式,双层模型界面的反射特征数值模拟显示,新公式具有较高的近似精度,且具备直接反演流体因子f、剪切模量μ和密度ρ等参数的优势,有效避免间接反演带来的误差.结合纵横波联合反演理论,提出了基于贝叶斯理论的新型联合反演算法.在实际应用中,对纵波和转换波角道集进行同相轴匹配处理,综合利用纵波和转换波资料携带的信息,实现基于Russell近似的多波联合反演.模型数据和实际资料测试结果表明,反演结果与真实值或测井结果匹配度较高,证实该方法真实有效. 相似文献