共查询到20条相似文献，搜索用时 23 毫秒
1.
We explore the link between basin modelling and seismic inversion by applying different rock physics models. This study uses the E‐Dragon II data in the Gulf of Mexico. To investigate the impact of different rock physics models on the link between basin modelling and seismic inversion, we first model relationships between seismic velocities and both (1) porosity and (2) effective stress for well‐log data using published rock physics models. Then, we build 1D basin models to predict seismic velocities derived from basin modelling with different rock physics models, in a comparison with average sonic velocities measured in the wells. Finally, we examine how basin modelling outputs can be used to aid seismic inversion by providing constraints for the background low‐frequency model. For this, we run different scenarios of inverting near angle partial stack seismic data into elastic impedances to test the impact of the background model on the quality of the inversion results. The results of the study suggest that the link between basin modelling and seismic technology is a two‐way interaction in terms of potential applications, and the key to refine it is establishing a rock physics models that properly describes changes in seismic signatures reflecting changes in rock properties. 相似文献
2.
Benyamin Khadem Mohammad Reza Saberi Mohammad Eslahati Bita Arbab 《Geophysical Prospecting》2020,68(5):1613-1632
Rock typing and flow unit detection are more challenging in clastic reservoirs with a uniform pore system. An integrated workflow based on well logs, inverted seismic data and rock physics models is proposed and developed to address such challenges. The proposed workflow supplies a plausible reservoir model for further investigation and adds extra information. Then, this workflow has been implemented in order to define different rock types and flow units in an oilfield in the Persian Gulf, where some of these difficulties have been observed. Here, rock physics models have the leading role in our proposed workflow by providing a diagnostic framework in which we successfully differentiate three rock types with variant characteristics on the given wells. Furthermore, permeability and porosity are calculated using the available rock physics models to define several flow units. Then, we extend our investigation to the entire reservoir by means of simultaneous inversion and rock physics models. The outcomes of the study suggest that in sediments with homogeneous pore size distribution, other reservoir properties such as shale content and cementation (which have distinct effects on the elastic domain) can be used to identify rock types and flow units. These reservoir properties have more physical insights for modelling purposes and can be distinguished on seismic cube using proper rock physics models. The results illustrate that the studied reservoir mainly consists of rock type B, which is unconsolidated sands and has the characteristics of a reservoir for subsequent fluid flow unit analysis. In this regard, rock type B has been divided into six fluid units in which the first detected flow unit is considered as the cleanest unit and has the highest reservoir process speed about 4800 to 5000 mD. Here, reservoir quality decreases from flow unit 1 to flow unit 6. 相似文献
3.
Maryam Sadat Mirkamali Abdolrahim Javaherian Hossein Hassani Mohammad Reza Saberi Seyed Abolfazl Hosseini 《Geophysical Prospecting》2020,68(7):2195-2216
Quality, availability and consistency of the measured and interpreted well log data are essential in the seismic reservoir characterization methods, and seismic petrophysics is the recommended workflow to achieve data consistency between logs and seismic domains. This paper uses seismic petrophysics workflow to improve well logs and pore geometry interpretations for an oil carbonate reservoir in the Fahliyan Formation in the southwest of Iran. The petrophysical interpreted well logs, rock physics and well-to-seismic tie analysis are integrated into the proposed workflow. Our implementation incorporates revising petrophysical well log interpretations and updating pore geometry characteristics to obtain a better well-tie quality. We first propose an improved pore-type characterization approach based on both P- and S-wave velocities for quantifying pore geometry. Then, seismic logs are estimated accordingly, and the results are used in the well-to-seismic analysis. The quality of the well-tie is improved, furthermore, by iterating on the petrophysical interpreted well logs as well as the calculated pore geometries. For the intervals with high-quality data, our workflow improves the consistency between the results of measured and modelled seismic logs. For the intervals with problematic well logs, the application of our proposed workflow results in the successful replacement of the poor data and subsequently leads to an improved wavelet estimation and well-tie results. In both cases, a higher quantification of pore geometries is achieved, which in turn is confirmed by the core images and formation micro-imager analysis. 相似文献
4.
提出了各向异性页岩储层统计岩石物理反演方法.通过统计岩石物理模型建立储层物性参数与弹性参数的定量关系，使用测井数据及井中岩石物理反演结果作为先验信息，将地震阻抗数据定量解释为储层物性参数、各向异性参数的空间分布.反演过程在贝叶斯框架下求得储层参数的后验概率密度函数，并从中得到参数的最优估计值及其不确定性的定量描述.在此过程中综合考虑了岩石物理模型对复杂地下介质的描述偏差和地震数据中噪声对反演不确定性的影响.在求取最大后验概率过程中使用模拟退火优化粒子群算法以提高收敛速度和计算准确性.将统计岩石物理技术应用于龙马溪组页岩气储层，得到储层泥质含量、压实指数、孔隙度、裂缝密度等物性，以及各向异性参数的空间分布及相应的不确定性估计，为页岩气储层的定量描述提供依据. 相似文献
5.
This paper discusses and addresses two questions in carbonate reservoir characterization: how to characterize pore‐type distribution quantitatively from well observations and seismic data based on geologic understanding of the reservoir and what geological implications stand behind the pore‐type distribution in carbonate reservoirs. To answer these questions, three geophysical pore types (reference pores, stiff pores and cracks) are defined to represent the average elastic effective properties of complex pore structures. The variability of elastic properties in carbonates can be quantified using a rock physics scheme associated with different volume fractions of geophysical pore types. We also explore the likely geological processes in carbonates based on the proposed rock physics template. The pore‐type inversion result from well log data fits well with the pore geometry revealed by a FMI log and core information. Furthermore, the S‐wave prediction based on the pore‐type inversion result also shows better agreement than the Greensberg‐Castagna relationship, suggesting the potential of this rock physics scheme to characterize the porosity heterogeneity in carbonate reservoirs. We also apply an inversion technique to quantitatively map the geophysical pore‐type distribution from a 2D seismic data set in a carbonate reservoir offshore Brazil. The spatial distributions of the geophysical pore type contain clues about the geological history that overprinted these rocks. Therefore, we analyse how the likely geological processes redistribute pore space of the reservoir rock from the initial depositional porosity and in turn how they impact the reservoir quality. 相似文献
6.
储层弹性与物性参数可直接应用于储层岩性预测和流体识别,是储层综合评价和油气藏精细描述的基本要素之一.现有的储层弹性与物性参数地震同步反演方法大都基于Gassmann方程,使用地震叠前数据,通过随机优化方法反演储层弹性与物性参数;或基于Wyllie方程,使用地震叠后数据,通过确定性优化方法反演储层弹性与物性参数.本文提出一种基于Gassmann方程、通过确定性优化方法开展储层弹性和物性参数地震叠前反演的方法,该方法利用Gassmann方程建立储层物性参数与叠前地震观测数据之间的联系,在贝叶斯反演框架下以储层弹性与物性参数的联合后验概率为目标函数,通过将目标函数的梯度用泰勒公式展开得到储层弹性与物性参数联合的方程组,其中储层弹性参数对物性参数的梯度用差分形式表示,最后通过共轭梯度算法迭代求解得到储层弹性与物性参数的最优解.理论试算与实际资料反演结果证明了方法的可行性. 相似文献
7.
岩石物理模板采用测井解释的各类岩性矿物骨架点值,选取适合该地区的岩石物理模型,模拟在不同储层组合、不同孔隙及不同饱和度情况下,储层岩石物理参数变化引起的储层测井参数及地球物理响应特征的变化,定量地建立起储层参数同地球物理弹性参数间的解释关系模版.本文根据新场JS42气藏储层参数分析结果,尝试性地将岩石物理解释模板应用于储层定量解释中,对储层高产气区、含水区域进行定量解释,并预测了该气藏的气水界面,该预测结果与实钻井测试情况吻合,证实了该方法的科学性. 相似文献
8.
Leonardo Azevedo Rúben Nunes Amílcar Soares Guenther Schwedersky Neto Teresa S. Martins 《Geophysical Prospecting》2018,66(Z1):116-131
Seismic inversion plays an important role in reservoir modelling and characterisation due to its potential for assessing the spatial distribution of the sub‐surface petro‐elastic properties. Seismic amplitude‐versus‐angle inversion methodologies allow to retrieve P‐wave and S‐wave velocities and density individually allowing a better characterisation of existing litho‐fluid facies. We present an iterative geostatistical seismic amplitude‐versus‐angle inversion algorithm that inverts pre‐stack seismic data, sorted by angle gather, directly for: density; P‐wave; and S‐wave velocity models. The proposed iterative geostatistical inverse procedure is based on the use of stochastic sequential simulation and co‐simulation algorithms as the perturbation technique of the model parametre space; and the use of a genetic algorithm as a global optimiser to make the simulated elastic models converge from iteration to iteration. All the elastic models simulated during the iterative procedure honour the marginal prior distributions of P‐wave velocity, S‐wave velocity and density estimated from the available well‐log data, and the corresponding joint distributions between density versus P‐wave velocity and P‐wave versus S‐wave velocity. We successfully tested and implemented the proposed inversion procedure on a pre‐stack synthetic dataset, built from a real reservoir, and on a real pre‐stack seismic dataset acquired over a deep‐water gas reservoir. In both cases the results show a good convergence between real and synthetic seismic and reliable high‐resolution elastic sub‐surface Earth models. 相似文献
9.
岩相和储层物性参数是油藏表征的重要参数，地震反演是储层表征和油气藏勘探开发的重要手段.随机地震反演通常基于地质统计学理论，能够对不同类型的信息源进行综合，建立具有较高分辨率的储层模型，因而得到广泛关注.其中，概率扰动方法是一种高效的迭代随机反演策略，它能综合考虑多种约束信息，且只需要较少的迭代次数即可获得反演结果.在概率扰动的优化反演策略中，本文有效的联合多点地质统计学与序贯高斯模拟，并结合统计岩石物理理论实现随机反演.首先，通过多点地质统计学随机模拟，获得一系列等可能的岩相模型，扰动更新初始岩相模型后利用相控序贯高斯模拟建立多个储层物性参数模型；然后通过统计岩石物理理论，计算相应的弹性参数；最后，正演得到合成地震记录并与实际地震数据对比，通过概率扰动方法进行迭代，直到获得满足给定误差要求的反演结果.利用多点地质统计学，能够更好地表征储层空间特征.相控序贯高斯模拟的应用，能够有效反映不同岩相中储层物性参数的分布.提出的方法可在较少的迭代次数内同时获得具有较高分辨率的岩相和物性参数反演结果，模型测试和实际数据应用验证了方法的可行性和有效性. 相似文献
10.
基于流体替换技术的地震AVO属性气藏识别(英文) 总被引：2，自引：1，他引：1
传统上,油藏地球物理工程师是基于测井数据进行流体替换,计算油藏饱和不同流体时的弹性参数,并通过地震正演模拟分析油藏饱和不同流体时的地震响应,从而进行油气藏识别研究。该研究方案为油藏研究提供了重要的弹性参数和地震响应信息,但这些信息仅限于井眼位置。对于实际油藏条件,地下储层参数都是随位置变化而变化的,如孔隙度、泥质含量和油藏厚度等,因此基于传统流体替换方案得到的流体变化地震响应信息对于油气藏识别具有很大的局限性。研究通过设定联系油藏弹性参数与孔隙度、矿物组分等参数的岩石物理模型,并基于三层地质模型,进行地震正演模拟与AVO属性计算。得到油藏孔隙度、泥质含量和储层厚度变化时地震AVO属性,并建立了饱和水储层和含气储层对应AVO属性(包括梯度与截距)之间的定量关系。建立的AVO属性之间的线性关系可以实现基于地震AVO属性直接进行流体替换。最后,应用建立的流体替换前后AVO属性之间线性方程,对模拟地震数据直接进行流体替换,并通过流体替换前后AVO属性交汇图分析实现了气藏识别。 相似文献
11.
对于陆相沉积环境下的复杂隐蔽岩性储层,由于观测信息不准确,如信息重叠、信息缺失和噪音污染,以及岩石物理关系模糊等原因,储层横向预测存在不惟一性、不稳定性和不确定性.基于线性假定的常规储层横向预测技术已不适用于复杂隐蔽岩性储层的勘探.本文采用一种非线性储层岩性物性褶积模型,建立波阻抗与孔隙度/泥质含量的函数关系;通过多级结构分解和双向边沿子波检测来刻画复杂岩石物理关系;通过Caianiello褶积神经网络实现确定性反演、统计反演和非线性理论三者有机结合;最后联合应用基于逆算子的反演方法和基于正算子的重建算法实现了综合地质、测井和地震波阻抗信息进行高分辨率储层物性参数反演.非线性储层物性参数反演采用多井约束机制和分频反演方式,在陆相和近海油气勘探资料的实际应用中,取得了明显应用效果. 相似文献
12.
Geostatistical seismic inversion for non‐stationary patterns using direct sequential simulation and co‐simulation 
下载免费PDF全文
下载免费PDF全文 Hamid Sabeti Ali Moradzadeh Faramarz Doulati Ardejani Leonardo Azevedo Amilcar Soares Pedro Pereira Ruben Nunes 《Geophysical Prospecting》2017,65(Z1):25-48
Geostatistical seismic inversion methods are routinely used in reservoir characterisation studies because of their potential to infer the spatial distribution of the petro‐elastic properties of interest (e.g., density, elastic, and acoustic impedance) along with the associated spatial uncertainty. Within the geostatistical seismic inversion framework, the retrieved inverse elastic models are conditioned by a global probability distribution function and a global spatial continuity model as estimated from the available well‐log data for the entire inversion grid. However, the spatial distribution of the real subsurface elastic properties is complex, heterogeneous, and, in many cases, non‐stationary since they directly depend on the subsurface geology, i.e., the spatial distribution of the facies of interest. In these complex geological settings, the application of a single distribution function and a spatial continuity model is not enough to properly model the natural variability of the elastic properties of interest. In this study, we propose a three‐dimensional geostatistical inversion technique that is able to incorporate the reservoir's heterogeneities. This method uses a traditional geostatistical seismic inversion conditioned by local multi‐distribution functions and spatial continuity models under non‐stationary conditions. The procedure of the proposed methodology is based on a zonation criterion along the vertical direction of the reservoir grid. Each zone can be defined by conventional seismic interpretation, with the identification of the main seismic units and significant variations of seismic amplitudes. The proposed method was applied to a highly non‐stationary synthetic seismic dataset with different levels of noise. The results of this work clearly show the advantages of the proposed method against conventional geostatistical seismic inversion procedures. It is important to highlight the impact of this technique in terms of higher convergence between real and inverted reflection seismic data and the more realistic approximation towards the real subsurface geology comparing with traditional techniques. 相似文献
13.
长波长假设条件下，各向同性背景地层中发育一组平行排列的垂直裂缝可等效为具有水平对称轴的横向各向同性（HTI）介质.基于不同观测方位的岩石地震响应特征变化，宽方位地震数据不仅可实现裂缝岩石弹性参数与各向异性参数的预测，同时也蕴含着丰富的孔隙度等储层物性参数信息.本文结合实际地震资料提出了贝叶斯框架下岩石物理驱动的储层裂缝参数与物性参数概率地震联合反演方法，首先基于AVAZ反演裂缝岩石的弹性参数与各向异性参数，并在此基础上通过统计岩石物理模型表征孔隙度、裂缝密度等各向异性介质储层参数与裂缝岩石参数的相互关联，并采用马尔科夫链蒙特卡洛（MCMC）抽样方法进行大量样本的随机模拟，使用期望最大化（EM）算法估计后验条件概率分布，最终寻找最大后验条件概率对应的孔隙度、裂缝密度等HTI裂缝介质储层参数即为反演结果.测井及实际地震数据处理表明，该方法能够稳定合理地从方位地震资料中获取裂缝岩石弹性参数与各向异性参数，并提供了一种较为可靠的孔隙度、裂缝密度等裂缝介质储层参数概率地震反演方法. 相似文献
14.
15.
叠前反演和地震吸收技术在复杂天然气藏地震预测中的应用 总被引：1，自引：0，他引：1
针对某复杂断块天然气目标储层,在岩石物理分析的指导下,综合利用地质、地震、测井等资料,提出了一套面向复杂天然气藏的叠前地震预测技术.首先基于地震岩石物理分析得到的初始横波信息,采用叠前贝叶斯非线性三参数反演得到了井旁控制点处精确纵横波速度和密度信息,然后通过叠前/叠后联合反演技术实现了面向目标的弹性阻抗体反演及含气储层敏感参数直接提取,最后结合小波变换时频谱分析的方法从叠前地震资料中估算地层吸收参数值,提高天然气藏识别精度.实际应用表明,综合各种叠前地震预测技术,可以大大提高对复杂天然气藏的识别精度,降低勘探风险. 相似文献
16.
Exploring seismic inversion methodologies for non‐stationary geological environments: a benchmark study between deterministic and geostatistical seismic inversion 下载免费PDF全文
下载免费PDF全文 This paper presents a comparison between subsurface impedance models derived from different deterministic and geostatistical seismic inversion methodologies applied to a challenging synthetic dataset. Geostatistical seismic inversion methodologies nowadays are common place in both industry and academia, contrasting with traditional deterministic seismic inversion methodologies that are becoming less used as part of the geo‐modelling workflow. While the first set of techniques allows the simultaneous inference of the best‐fit inverse model along with the spatial uncertainty of the subsurface elastic property of interest, the second family of inverse methodology has proven results in correctly predicting the subsurface elastic properties of interest with comparatively less computational cost. We present herein the results of a benchmark study performed over a realistic three‐dimensional non‐stationary synthetic dataset in order to assess the performance and convergence of different deterministic and geostatistical seismic inverse methodologies. We also compare and discuss the impact of the inversion parameterisation over the exploration of the model parameter space. The results show that the chosen seismic inversion methodology should always be dependent on the type and quantity of the available data, both seismic and well‐log, and the complexity of the geological environment versus the assumptions behind each inversion technique. The assessment of the model parameter space shows that the initial guess of traditional deterministic seismic inversion methodologies is of high importance since it will determine the location of the best‐fit inverse solution. 相似文献
17.
储层物性参数是储层描述的重要参数,常规的基于贝叶斯理论的储层物性参数反演方法大多是通过反演获得的弹性参数进一步转换而获得物性参数,本文提出一种基于弹性阻抗数据预测储层物性参数的反演方法.该方法主要通过建立可以表征弹性阻抗与储层物性参数之间关系的统计岩石物理模型,联合蒙特卡罗仿真模拟技术,在贝叶斯理论框架的指导下,应用期望最大化算法估计物性参数的后验概率分布,最终实现储层物性参数反演.经过模型测试和实际资料的处理,其结果表明本文提出的方法具有预测精度高,稳定性强,横向连续性好等优点. 相似文献
18.
Jean‐Paul van Gestel Kevin D. Best Olav I. Barkved Jan H. Kommedal 《Geophysical Prospecting》2011,59(4):673-681
The frequent time‐lapse observations from the life of field seismic system across the Valhall field provide a wealth of information. The responses from the production and injection wells can be observed through time‐shift and amplitude changes. These observations can be compared to modelled synthetic seismic responses from a reservoir simulation model of the Valhall Field. The observed differences between the observations and the modelling are used to update and improve the history match of the reservoir model. The uncertainty of the resulting model is reduced and a more confident prediction of future reservoir performance is provided. A workflow is presented to convert the reservoir model to a synthetic seismic response and compare the results to the observed time‐lapse responses for any time range and area of interest. Correlation based match quality factors are calculated to quantify the visual differences. This match quality factor allows us to quantitatively compare alternative reservoir models to help identify the parameters that best match the seismic observations. Three different case studies are shown where this workflow has helped to reduce the uncertainty range associated with specific reservoir parameters. By updating various reservoir model parameters we have been able to improve the match to the observations and thereby improve the overall reservoir model predictability. The examples show positive results in a range of different reservoir modelling issues, which indicates the flexibility of this workflow and the ability to have an impact in most reservoir modelling challenges. 相似文献
19.
Bayesian inversion of time‐lapse seismic data for the estimation of static reservoir properties and dynamic property changes 下载免费PDF全文
下载免费PDF全文 Seismic conditioning of static reservoir model properties such as porosity and lithology has traditionally been faced as a solution of an inverse problem. Dynamic reservoir model properties have been constrained by time‐lapse seismic data. Here, we propose a methodology to jointly estimate rock properties (such as porosity) and dynamic property changes (such as pressure and saturation changes) from time‐lapse seismic data. The methodology is based on a full Bayesian approach to seismic inversion and can be divided into two steps. First we estimate the conditional probability of elastic properties and their relative changes; then we estimate the posterior probability of rock properties and dynamic property changes. We apply the proposed methodology to a synthetic reservoir study where we have created a synthetic seismic survey for a real dynamic reservoir model including pre‐production and production scenarios. The final result is a set of point‐wise probability distributions that allow us to predict the most probable reservoir models at each time step and to evaluate the associated uncertainty. Finally we also show an application to real field data from the Norwegian Sea, where we estimate changes in gas saturation and pressure from time‐lapse seismic amplitude differences. The inverted results show the hydrocarbon displacement at the times of two repeated seismic surveys. 相似文献
20.
基于岩石物理和地震反演理论，提出了一种同步反演储层孔隙度和含水饱和度的方法.以岩石物理为基础，建立了砂泥岩储层物性和弹性参数之间定量的关系-Simon模型，以贝叶斯理论为手段，结合不同类型的砂泥岩储层，建立了多信息联合约束的物性参数反演目标函数，并通过蒙特卡罗和遗传算法相结合的思路求解该目标函数，最终得到孔隙度和含水饱和度的同步反演结果.将该方法应用于河道砂和砂砾岩两种不同的砂泥岩储层中，孔隙度和含水饱和度数据的联合应用，进一步减少了储层预测的多解性，为石油地质综合研究提供了更加丰富准确的基础数据. 相似文献