共查询到20条相似文献，搜索用时 15 毫秒
1.
The Millstone Hill Incoherent Scatter Data Acquisition System (MIDAS) is based on an abstract model of an incoherent scatter radar. This model is implemented in a hierarchical software system, which serves to isolate hardware and low-level software implementation details from higher levels of the system. Inherent in this is the idea that implementation details can easily be changed in response to technological advances. MIDAS is an evolutionary system, and the MIDAS hardware has, in fact, evolved while the basic software model has remained unchanged. From the earliest days of MIDAS, it was realized that some functions implemented in specialized hardware might eventually be implemented by software in a general-purpose computer. MIDAS-W is the realization of this concept. The core component of MIDAS-W is a Sun Microsystems UltraSparc 10 workstation equipped with an Ultrarad 1280 PCI bus analog to digital (A/D) converter board. In the current implementation, a 2.25 MHz intermediate frequency (IF) is bandpass sampled at 1 s intervals and these samples are multicast over a high-speed Ethernet which serves as a raw data bus. A second workstation receives the samples, converts them to filtered, decimated, complex baseband samples and computes the lag-profile matrix of the decimated samples. Overall performance is approximately ten times better than the previous MIDAS system, which utilizes a custom digital filtering module and array processor based correlator. A major advantage of MIDAS-W is its flexibility. A portable, single-workstation data acquisition system can be implemented by moving the software receiver and correlator programs to the workstation with the A/D converter. When the data samples are multicast, additional data processing systems, for example for raw data recording, can be implemented simply by adding another workstation with suitable software to the high-speed network. Testing of new data processing software is also greatly simplified, because a workstation with the new software can be added to the network without impacting the production system. MIDAS-W has been operated in parallel with the existing MIDAS-1 system to verify that incoherent scatter measurements by the two systems agree. MIDAS-W has also been used in a high-bandwidth mode to collect data on the November, 1999, Leonid meteor shower. 相似文献
2.
3.
Investigating the geomorphological potential of freely available and accessible structure‐from‐motion photogrammetry using a smartphone 
下载免费PDF全文
下载免费PDF全文 We test the acquisition of high‐resolution topographic and terrain data using hand‐held smartphone technology, where the acquired images can be processed using technology freely available to the research community. This is achieved by evaluating the quality of digital terrain models (DTM) of a river bank and an Alpine alluvial fan generated with a fully automated, free‐to‐use, structure‐from‐motion package and a smartphone integrated camera (5 megapixels) with terrestrial laser scanning (TLS) data used to provide a benchmark. To evaluate this approach a 16.2‐megapixel digital camera and an established, commercial, close‐range and semi‐automated software are also employed, and the product of the four combinations of the two types of cameras and software are compared. Results for the river bank survey demonstrate that centimetre‐precision DTMs can be achieved at close range (10 m or less), using a smartphone camera and a fully automated package. Results improve to sub‐centimetre precision with either higher‐resolution images or by applying specific post‐processing techniques to the smartphone DTMs. Application to an entire Alpine alluvial fan system shows the degradation of precision scales linearly with image scale, but that (i) the expected level of precision remains and (ii) difficulties in separating vegetation and sediment cover within the results are similar to those typically found when using other photo‐based techniques and laser scanning systems. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
4.
陈华北 《CT理论与应用研究》2018,27(5):627-633
声波电视是利用声波走时和振幅参数进行钻孔壁成像的一种地球物理测井系统。由于采用数字技术和配置功能完善的软件，系统具有图像分辨率高、测井速度快、可在混浊的井液中工作、数据处理和分析过程相对简单的特性，是研究岩层结构面的有效手段。在刚果（金）某铜钴矿岩体稳定性评价中，采用声波测井方法，获取岩体的优势结构面，为确定采坑边坡角、岩体抗剪强度指标提供了可靠数据。本文介绍RG声波电视测井的原理及方法，以DK02孔为例，对所揭露岩层结构面、裂隙发育信息进行分析。工程实践说明，声波井下电视在进行深部岩体的原位勘察方面具有明显优势。 相似文献
5.
重磁探测是金属矿勘探的主要手段之一，其处理和解释方法技术已得到很大的发展，研发与其相适应的重磁软件是重要的研究课题.在国家863课题的支持下，我们设计并研发了重磁处理解释集成化软件系统.在分析国内外现有软件不足的基础上，我们对重磁软件系统所应具有的操作行为进行了针对性的设计，提出了具有特色的功能设计思路，并进行了针对性的研发实现.为满足深部矿产资源勘探需求和精细化解释需要，提出了更加具有针对性的软件设计解决方案，研发了特色的处理解释模块，核心突出软件的实时可视化和协同交互操作，使软件系统能高效地服务于使用者的目标任务.在优化改进处理、正反演算法的基础上，提出多核并行化方案并实现，提高了软件整体运行速度.最终形成了将数据管理、数据可视化、数据处理及解释有机结合的特色软件系统，为金属矿探测提供了一个高效、有力的工具. 相似文献
6.
M. Hassanien Serror Junya Inoue Muneo Hori Yozo Fujino Tsuyoshi Ichimura 《地震工程与结构动力学》2007,36(11):1561-1579
A software prototype of a simulation service software environment, called DOSE (distributed object‐based software environment), is developed to realize the integrated simulation of an urban system under the risk of urban‐scale hazards such as earthquakes. DOSE infrastructure is built on three basic building blocks, namely: modularity, scalability, and interoperability. In this paper, the application of DOSE to real‐world urban systems is described in order to provide an evidence for DOSE modularity and scalability. An overview of DOSE is presented and then followed by a beverage application to simulate earthquake hazard in an urban system. The urban system is developed for the city of Kobe (Kobe district) with dimensions of 700 × 500 (m) and Bunkyo ward (Tokyo district) with dimensions of 800 × 600 (m) where DOSE simulation participants are identified for each district. The effectiveness of data exchange among different participants through a distributed service exchange network is described as an evidence for DOSE modularity that facilitates the integration process. On the other hand, the effectiveness of processing time when applying the simulation to different urban system sizes and/or using different third‐party applications is described as an evidence for DOSE scalability. The details of the underlying infrastructure of DOSE are beyond the scope of this paper and are presented in an accompanying paper work. Copyright © 2007 John Wiley & Sons, Ltd. 相似文献
7.
D. R. Parsons P. R. Jackson J. A. Czuba F. L. Engel B. L. Rhoads K. A. Oberg J. L. Best D. S. Mueller K. K. Johnson J. D. Riley 《地球表面变化过程与地形》2013,38(11):1244-1260
The use of acoustic Doppler current profilers (ADCP) for discharge measurements and three‐dimensional flow mapping has increased rapidly in recent years and has been primarily driven by advances in acoustic technology and signal processing. Recent research has developed a variety of methods for processing data obtained from a range of ADCP deployments and this paper builds on this progress by describing new software for processing and visualizing ADCP data collected along transects in rivers or other bodies of water. The new utility, the Velocity Mapping Toolbox (VMT), allows rapid processing (vector rotation, projection, averaging and smoothing), visualization (planform and cross‐section vector and contouring), and analysis of a range of ADCP‐derived datasets. The paper documents the data processing routines in the toolbox and presents a set of diverse examples that demonstrate its capabilities. The toolbox is applicable to the analysis of ADCP data collected in a wide range of aquatic environments and is made available as open‐source code along with this publication. Published 2012. This article is a U.S. Government work and is in the public domain in the USA. 相似文献
8.
Understanding fracture orientations is important for optimal field development of fractured reservoirs because fractures can act as conduits for fluid flow. This is especially true for unconventional reservoirs (e.g., tight gas sands and shale gas). Using walkaround Vertical Seismic Profiling (VSP) technology presents a unique opportunity to identify seismic azimuthal anisotropy for use in mapping potential fracture zones and their orientation around a borehole. Saudi Aramco recently completed the acquisition, processing and analysis of a walkaround VSP survey through an unconventional tight gas sand reservoir to help characterize fractures. In this paper, we present the results of the seismic azimuthal anisotropy analysis using seismic traveltime, shear‐wave splitting and amplitude attenuation. The azimuthal anisotropy results are compared to the fracture orientations derived from dipole sonic and image logs. The image log interpretation suggests that an orthorhombic fracture system is present. VSP data show that the P‐wave traveltime anisotropy direction is NE to SW. This is consistent with the cemented fractures from the image log interpretation. The seismic amplitude attenuation anisotropy direction is NW to SE. This is consistent with one of the two orientations obtained using transverse to radial amplitude ratio analysis, with the dipole sonic and with open fracture directions interpreted from image log data. 相似文献
9.
地震灾害损失快速评估与制图在震后应急中发挥着极其重要的作用。本文以京津冀地区为例，实现一种新颖、实用的快速评估与制图技术，其基于离线数据与自主研发的软件模块即可完成地震灾害损失快速评估与专业制图表达。关键技术与方法包括:①京津冀地区基础地理数据与重要涉震数据的融合处理，基于细节层次模型（LOD）的地图显示原理，制作多级预缓存离线地图数据；②基于先进的分区分类评估模型与计算方法，生成京津冀地区不同烈度下地震灾害损失预评估结果的公里网格数据；③针对大量的离线地图数据与损失预评估公里网格数据，基于地理空间分区实现高效的离线存储管理机制；④基于面向对象编程和图形图像处理技术，实现地震灾害损失快速评估与专业制图表达一体化软件集成开发。本研究实现了全链条关键技术，不依赖任何第三方商业软件或服务插件，1分钟内即可自动完成快速评估报告与系列专题图件的生成。研究结果在多次地震应急中取得应用实效，对于提高地震应急处置能力有重要意义。 相似文献
10.
Method and Excel VBA Algorithm for Modeling Master Recession Curve Using Trigonometry Approach 下载免费PDF全文
下载免费PDF全文 A new method was developed and implemented into an Excel Visual Basic for Applications (VBAs) algorithm utilizing trigonometry laws in an innovative way to overlap recession segments of time series and create master recession curves (MRCs). Based on a trigonometry approach, the algorithm horizontally translates succeeding recession segments of time series, placing their vertex, that is, the highest recorded value of each recession segment, directly onto the appropriate connection line defined by measurement points of a preceding recession segment. The new method and algorithm continues the development of methods and algorithms for the generation of MRC, where the first published method was based on a multiple linear/nonlinear regression model approach (Posavec et al. 2006). The newly developed trigonometry‐based method was tested on real case study examples and compared with the previously published multiple linear/nonlinear regression model‐based method. The results show that in some cases, that is, for some time series, the trigonometry‐based method creates narrower overlaps of the recession segments, resulting in higher coefficients of determination R2, while in other cases the multiple linear/nonlinear regression model‐based method remains superior. The Excel VBA algorithm for modeling MRC using the trigonometry approach is implemented into a spreadsheet tool (MRCTools v3.0 written by and available from Kristijan Posavec, Zagreb, Croatia) containing the previously published VBA algorithms for MRC generation and separation. All algorithms within the MRCTools v3.0 are open access and available free of charge, supporting the idea of running science on available, open, and free of charge software. 相似文献
11.
Multi‐scale relief model (MSRM): a new algorithm for the visualization of subtle topographic change of variable size in digital elevation models 下载免费PDF全文
下载免费PDF全文 Morphological analysis of landforms has traditionally relied on the interpretation of imagery. Although imagery provides a natural view of an area of interest (AOI) images are largely hindered by the environmental conditions at the time of image acquisition, the quality of the image and, mainly, the lack of topographical information, which is an essential factor for a correct understanding of the AOI's geomorphology. More recently digital surface models (DSMs) have been incorporated into the analytical toolbox of geomorphologists. These are usually high‐resolution models derived from digital photogrammetric processes or LiDAR data. However, these are restricted to relatively small areas and are expensive or complex to acquire, which limits widespread implementation. In this paper, we present the multi‐scale relief model (MSRM), which is a new algorithm for the visual interpretation of landforms using DSMs. The significance of this new method lies in its capacity to extract landform morphology from both high‐ and low‐resolution DSMs independently of the shape or scale of the landform under study. This method thus provides important advantages compared to previous approaches as it: (1) allows the use of worldwide medium resolution models, such as SRTM, ASTER GDEM, ALOS, and TanDEM‐X; (2) offers an alternative to traditional photograph interpretation that does not rely on the quality of the imagery employed nor on the environmental conditions and time of its acquisition; and (3) can be easily implemented for large areas using traditional GIS/RS software. The algorithm is tested in the Sutlej‐Yamuna interfluve, which is a very large low‐relief alluvial plain in northwest India where 10 000 km of palaeoriver channels have been mapped using MSRM. The code, written in Google Earth Engine's implementation of JavaScript, is provided as Supporting Information for its use in any other AOI without particular technical knowledge or access to topographical data. © 2017 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd. 相似文献
12.
卫星遥感热红外辐射与川滇强震探讨 总被引：10，自引：0，他引：10
为了使卫星空间监测技术在地震监测预报的应用研究由理论性、实验性阶段进入实用性阶段，进行了探索和尝试。按照地震前兆资料常规处理的格式和要求，对收集的部分卫星遥感热红外辐射观测资料进行了处理。处理过程中使用了包含数据格式转换、数据预处理、异常挑选等内容的计算机工作软件。在此基础上，根据卫星遥感数据资料所具有的二维均匀分布的特性，应用平面和立体的数据图像处理软件，对卫星遥感热红外辐射观测资料的异常场信息进行了研究。同时，开发出了使用卫星遥感热红外辐射观测资料的数据接口软件。卫星空间监测技术的应用将给地震监测预报带来全新的思维方式及更加快捷实用的数据采集、传送、处理和分析方法。 相似文献
13.
无人机遥感技术系统作为新时期应急救援装备是震后快速获取灾情信息的重要手段,随着无人机的智能化、轻量化的影像处理软件的迅猛发展,无人机领域的应用也越来越广泛。本文选取了辽宁大连城岭村作为实验地点,以大疆精灵4pro无人机获取的1个架次308张照片作为实验数据,选取Pix4D、smart3D、photoscan三款无人机影像处理软件,以处理流程、耗时、正射精度、三维建模等指标作为测试指标对三款软件开展对比研究工作。研究结果表明,小型消费级无人机在飞控系统下的测量精度可达厘米级,处理流程方面从简到难依次为Pix4D、photoscan、smart3D,耗时方面从短到长依次为Pix4D、photoscan、smart3D,正射(dom)精度从高到低依次为Pix4D、smart3D、photoscan,三维建模精度从高到低依次为smart3D、Pix4D、photoscan,该实验结果不仅为搭建地震应急前后方指挥部数据处理平台建设提供技术支撑,同时还对使用此类无人机做行业应用及飞行参数设置提供参考意义。 相似文献
14.
Mark A. Fonstad James T. Dietrich Brittany C. Courville Jennifer L. Jensen Patrice E. Carbonneau 《地球表面变化过程与地形》2013,38(4):421-430
The production of topographic datasets is of increasing interest and application throughout the geomorphic sciences, and river science is no exception. Consequently, a wide range of topographic measurement methods have evolved. Despite the range of available methods, the production of high resolution, high quality digital elevation models (DEMs) requires a significant investment in personnel time, hardware and/or software. However, image‐based methods such as digital photogrammetry have been decreasing in costs. Developed for the purpose of rapid, inexpensive and easy three‐dimensional surveys of buildings or small objects, the ‘structure from motion’ photogrammetric approach (SfM) is an image‐based method which could deliver a methodological leap if transferred to geomorphic applications, requires little training and is extremely inexpensive. Using an online SfM program, we created high‐resolution digital elevation models of a river environment from ordinary photographs produced from a workflow that takes advantage of free and open source software. This process reconstructs real world scenes from SfM algorithms based on the derived positions of the photographs in three‐dimensional space. The basic product of the SfM process is a point cloud of identifiable features present in the input photographs. This point cloud can be georeferenced from a small number of ground control points collected in the field or from measurements of camera positions at the time of image acquisition. The georeferenced point cloud can then be used to create a variety of digital elevation products. We examine the applicability of SfM in the Pedernales River in Texas (USA), where several hundred images taken from a hand‐held helikite are used to produce DEMs of the fluvial topographic environment. This test shows that SfM and low‐altitude platforms can produce point clouds with point densities comparable with airborne LiDAR, with horizontal and vertical precision in the centimeter range, and with very low capital and labor costs and low expertise levels. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
15.
G.R.J. Cooper 《Geophysical Prospecting》2018,66(1):197-206
The Generalised Derivative Operator is an image‐processing tool for the enhancement of potential field data. It produces an amplitude‐balanced image of the derivative of a potential field in any direction in three‐dimensional space. This paper shows how, by using the correct inclination angle ?, the Generalised Derivative Operator can be used to produce images where its maxima/minima lie directly over dipping contacts and thin dykes with arbitrary magnetisation vectors. The dip of contacts and dykes can be found by varying ? until a symmetrical result is obtained (in the absence of unknown remanent magnetisation). Furthermore, the width of the peak of the Generalised Derivative Operator can then be used to determine the depth of the contact or dyke. 相似文献
16.
基于ICT断层扫描图像的逆向工程软件平台 总被引：2，自引：0，他引：2
本文介绍了一种基于ICT断层扫描图像的逆向工程软件平台.该软件运用图像图形处理中的边缘检测、阈值分割、边界细化、矢量化及格式转换等算法与技术,实现了工件由三维断层ICT数据到CAD图纸再编辑的功能.软件操作流程简便清晰,易于使用. 相似文献
17.
Lake studies play an important role in water management, ecology and other environmental issues. Monitoring lake stages is typically the first step on the lake studies. However, for the Prairie Pothole Region (PPR) of North America with millions of small lakes and potholes, onsite measurements for lake stages are almost impossible with the conventional gage stations due to the limited accessibility to lakes and the requirement of economical and human resources. To overcome this limitation, we employed the remote‐sensing approach to extract lake stages in PPR for bulk processing. To estimate lake stages, several image‐processing techniques were used with the Shuttle Radar Topography Mission (SRTM) data in January, 2000, a one‐time snapshot useful in historic lake level reconstruction. In this research, image processing techniques, for example, averaging, Fast Fourier Transform (FFT), Lee‐Sigma filtering were applied and masking with Canny Edge Detector (CED) and semi‐automated contouring were developed for lake stage estimation. In terms of simplicity, averaging might be useful if 1·5 m of the local bias for the study area in stage estimates. However, the FFT and Lee‐Sigma methods were slightly better than averaging. Masking with CED and semi‐automated contouring provided outstanding accuracy in the estimation. The masking and contouring methods provided ± 0·5 m of stage differences for relatively large lakes greater than 10 km2 when compared with stage reading in spite of their calculation complexities and was shown as the best approaches among implemented methods in this study. Copyright © 2010 John Wiley & Sons, Ltd. 相似文献
18.
Paul Sava 《Geophysical Prospecting》2015,63(5):1086-1096
Waveform inversion is a velocity‐model‐building technique based on full waveforms as the input and seismic wavefields as the information carrier. Conventional waveform inversion is implemented in the data domain. However, similar techniques referred to as image‐domain wavefield tomography can be formulated in the image domain and use a seismic image as the input and seismic wavefields as the information carrier. The objective function for the image‐domain approach is designed to optimize the coherency of reflections in extended common‐image gathers. The function applies a penalty operator to the gathers, thus highlighting image inaccuracies arising from the velocity model error. Minimizing the objective function optimizes the model and improves the image quality. The gradient of the objective function is computed using the adjoint state method in a way similar to that in the analogous data‐domain implementation. We propose an image‐domain velocity‐model building method using extended common‐image‐point space‐ and time‐lag gathers constructed sparsely at reflections in the image. The gathers are effective in reconstructing the velocity model in complex geologic environments and can be used as an economical replacement for conventional common‐image gathers in wave‐equation tomography. A test on the Marmousi model illustrates successful updating of the velocity model using common‐image‐point gathers and resulting improved image quality. 相似文献
19.
Short‐term prediction of environmental variables such as stream flow rate is useful to members of the general public and environmental scientists alike, providing the ability to predict environmental disasters or scientifically interesting events. Here, a neural‐network based method is presented, which is capable of providing advance flood warnings or the prediction of high stream flow events for research purposes in a small upland headwater in NE Scotland. This method relies on training from past time series data acquired in the field, and provides the ability to predict a range of hydrological and meteorological variables up to 24 h ahead using feedback of predicted values at time t as new inputs for the next time step t + 1. The system is rapid and effective, relies on standard neural network training methods, and has the potential to be implemented in a web‐based monitoring and prediction package. The model design could be implemented at any study site where time series data has been gathered, and is sufficiently flexible to accept whatever data is available. Copyright © 2007 John Wiley & Sons, Ltd. 相似文献
20.
在医用X-CT中,散射现象对重建图像的质量有重要的影响。多源锥束CT是医用CT的一种发展趋势,可成倍提高时间分辨率。但与单源CT相比,多源CT额外的光源会导致散射现象的加重,因此在实际应用中需要着重考虑这一问题。本文在开源工具EGSnrc的基础上,开发了一套基于蒙特卡罗法的CT仿真软件SimProj,用该软件获得了贴近... 相似文献