共查询到18条相似文献，搜索用时 218 毫秒
1.
The 2018,Songyuan,Jilin M_S5. 7 earthquake occurred at the intersection of the FuyuZhaodong fault and the Second Songhua River fault. The moment magnitude of this earthquake is M_W5. 3,the centroid depth by the waveform fitting is 12 km,and it is a strike-slip type event. In this paper,with the seismic phase data provided by the China Earthquake Network, the double-difference location method is used to relocate the earthquake sequence,finally the relocation results of 60 earthquakes are obtained. The results show that the aftershock zone is about 4. 3km long and 3. 1km wide,which is distributed in the NE direction. The depth distribution of the seismic sequence is 9km-10 km. 1-2 days after the main shock,the aftershocks were scattered throughout the aftershock zone,and the largest aftershock occurred in the northeastern part of the aftershock zone. After 3-8 days,the aftershocks mainly occurred in the southwestern part of the aftershock zone. The profile distribution of the earthquake sequence shows that the fault plane dips to the southeast with the dip angle of about 75°. Combined with the regional tectonic setting,focal mechanism solution and intensity distribution,we conclude that the concealed fault of the Fuyu-Zhaodong fault is the seismogenic fault of the Songyuan M_S5. 7 earthquake. This paper also relocates the earthquake sequence of the previous magnitude 5. 0 earthquake in 2017. Combined with the results of the focal mechanism solution,we believe that the two earthquakes have the same seismogenic structure,and the earthquake sequence generally develops to the southwest. The historical seismic activity since 2009 shows that after the magnitude 5. 0 earthquake in 2017,the frequency and intensity of earthquakes in the earthquake zone are obviously enhanced,and attention should be paid to the development of seismic activity in the southwest direction of the earthquake zone. 相似文献
2.
Based on the digital waveforms of the Xinjiang Digital Seismic Network,the Jinghe M_S6.6 earthquake sequence( M_L≥1. 0) were relocated by HypoDD,The characteristics of the spatial distribution and the seismogenic structure of this earthquake sequence were analyzed. The results show that the main shock is relocated at 44. 2639° N,82. 8294° E,and the initial rupture depth is 17. 6 km. The earthquake sequence clearly demonstrates a unilateral extension of about 20 km in the EW direction,and is mainly located at a depth of 7km-17 km. The depth profile along the aftershock direction shows that the focal depth of aftershocks tend to be shallower within 10 km to the west of the main shock,the focal depth of the aftershock sequence with the tail direction deflecting SW is deeper. The depth profile perpendicular to the earthquake sequence shows a gradual deepening of the seismic sequence from north to south,which indicates that the fault plane is dipping south.According to the focal mechanism solution,given by the Institute of Geophysics,China Earthquake Administration,and the geological structure of the seismic source region,it is inferred that the seismogenic structure of the Jinghe M_S 6.6 earthquake may be the eastern segment of the Kusongmuxieke fault. 相似文献
3.
Study of the Seismogenic Structure of the October 12th, 2019 MS5.2 Beiliu Earthquake, Guangxi, China
On October 12~(th),2019,a M_S5.2 earthquake occurred in Beiliu City,Guangxi Zhuang Autonomous Region,China,with a focal depth of 10 km. The epicenter is located in the junction of Guangxi and Guangdong where the moderate-strong earthquakes are relatively active. The highest intensity of this earthquake is estimated up to Ⅵ besides the isoseismic line showed an ellipse shape with a long axis trend in the NW direction.The aftershocks are not evenly distributed. The parameters of the focal mechanism solutions are: strike 346°,dip 85°,rake 19° for the nodal planeⅠ,and strike 254°,dip 71°,rake 175° for the nodal planeⅡ. The type of the coseismic fault is strikeslip. After analyzing these results above and the active faults near the epicenter,we get that the nodal planeⅠ is interpreted as the coseismic rupture plane and the BamaBobai Fault is a seismogenic structure of M_S5.2 Beiliu earthquake. 相似文献
4.
Taking the 2013 Tongliao MS5. 3 earthquake as a research subject, on the basis of statistical analysis of earthquake sequence using the HypoDD location method and focal mechanism solutions,the paper analyzes and discusses the relationship between the ML4. 4 and MS5. 3 earthquakes. The results show that the Tongliao MS5. 3 earthquake occurred under the background of medium-small earthquakes long-term quiescence and short-term enhancement in the epicentral area. The results of accurate seismic location shows that the Tongliao MS5. 3 earthquake sequence is distributed in the NW direction,extending 10 km,and the ML≥3. 0 aftershocks are concentrated south of the mainshock. The distance between the MS5. 3 mainshock and the ML4. 4 foreshock is about 1. 8 km,with a focal depth of 7. 208 km and 7. 089 km,respectively,their focal location is very close,and may have occurred on the same fault plane. The results of focal mechanism shows that the Tongliao MS5. 3 earthquake is of the strike-slip type,the focal mechanism of aftershocks are disordered,and with time lapse,the type is changed from strike-slip to thrust and normal faulting. The bigger foreshocks had similar focal mechanism and were all normal fault types,which exhibits to some extent,an obvious crustal medium anisotropy in the epicentral area before macroscopic rupturing,as represented by alignment fractures,with stress action enhanced,this"consistency"of seismic precursor regime would gestate the mainshock. According to the characteristics of temporal-spatial distribution of earthquake sequence and similarity of focal mechanism,we judge that the Tongliao MS5. 3 earthquake sequence is a foreshock-mainshock-aftershock type. 相似文献
5.
The Akto M_S6. 7 earthquake occurred near the western end of the Muji fault basin in the top of the Pamir syntaxis. The main shock of this earthquake is complicated and the focal mechanism solutions based on the seismic wave inversions are different. Based on the Sentinel-1 SAR data,the coseismal deformation field of the earthquake is obtained by In SAR technique. Based on the elastic half-space dislocation model,the geometrical parameters and the slip distribution model are determined by nonlinear and linear inversion algorithms. The results show that the distributed slip model can well explain the coseismic deformation field. The earthquake includes at least two rupture events,which are located at 7 km(74. 11°E,39. 25°N)and 33 km(74. 49°E,39. 16°N)east from the epicenter according to the CENC. The deformation field caused by the earthquake shows a symmetry distribution,with the maximum LOS deformation of 20 cm. The main seismic slip is concentrated in the 0-20 km depth,and the maximum slip is 0. 84 m. The seismic fault is the Muji fault,and this earthquake indicates that the northeastward push of the Indian plate is enhanced. 相似文献
6.
Five mobile digital seismic stations were set up by the Earthquake Administration of Yunnan Province near the epicenter of the main shock after the Ning’er M6.4 earthquake on June 3, 2007. In this paper, the aftershock sequence of the Ning’er M6.4 earthquake is relocated by using the double difference earthquake location method. The data is from the 5 mobile digital seismic stations and the permanent Simao seismic station. The results show that the length of the aftershock sequence is 40km and the width is 30km, concentrated obviously at the lateral displacement area between the Pu’er fault and the NNE-trending faults, with the majority occurring on the Pu’er fault around the main shock. The depths of aftershocks are from 2km to 12km, and the predominant distribution is in the depth of 8～10km. The mean depth is 7.9km. The seismic fault dips to the northwest revealed from the profile parallel to this aftershock sequence, which is identical to the dip of the secondary fault of the NE-trending Menglian-Mojiang fault in the earthquake area. There are more earthquakes concentrated in the northwest segment than in the southeast segment, which is perhaps related to the underground medium and faults. The depth profile of the earthquake sequence shows that the relocated earthquakes are mainly located near the Pu’er fault and the seismic faults dip to the southwest, consistent with the dip of the west branch of the Pu’er fault. In all, the fault strike revealed by earthquake relocations matches well with the strike in the focal mechanism solutions. The main shock is in the top of the aftershock sequence and the aftershocks are symmetrically distributed, showing that faulting was complete in both the NE and SW directions. 相似文献
7.
Based on the lateral segmentation and vertical stratification characteristics of the crustal medium in Sichuan-Yunnan region,and the asymmetry of the static dislocations on the coseismic fault plane of the Wenchuan M_S8. 0 earthquake,we built a three-dimensional viscoelastic finite element model of the crust in the Sichuan-Yunnan region. The postseismic impact of the Wenchuan M_S8. 0 earthquake on the Sichuan-Yunnan region was studied.The results show that:① The far-field horizontal deformation caused by the viscoelastic relaxation of the medium in the 10 years after the earthquake is about 0-20 mm within the Sichuan-Yunnan diamond-shaped block,which has a greater influence on north side and smaller on south side.② In the 10 years after the earthquake,the far-field vertical deformation caused by the viscoelastic relaxation effect of the medium is small,and it shows an increase of about 0-4 mm in most areas of the Sichuan-Yunnan diamond-shaped block.③ The Xianshuihe fault and the eastern segment of the East Kunlun fault,which are close to the seismogenic fault,show a high gradient on deformation fields after the earthquake.④ In order to compare with the strong earthquake activity in the SichuanYunnan region after the Wenchuan earthquake, the horizontal stress state and the Coulomb failure stress change of the active block boundary are also calculated. From the spatial distribution of the coseismic and postseismic displacement field,the fault activity characteristics reflected by the stress state and the stress loading of the fault layer reflected by the Coulomb failure stress change,there is a certain correlation with the spatial distribution of strong earthquake activity in this region. 相似文献
8.
Complete records of more than 3,000 earthquake events in the Shanxi, Wenzhou reservoir earthquake sequence were recorded from August to November,2014 by the high-density,high-resolution monitoring stations of the Zhejiang Regional Digital Seismic Network and the reservoir earthquake monitoring network,with a maximum magnitude of M4. 2. Based on 3-D epicenter location, focal mechanism solutions, and in combination with the geological and tectonic characteristics of the reservoir area,the earthquake sequence is discussed in this paper. The linear fitting of the Hypo SAT location results show that the main shock occurred in the NW trending fault and the earthquake sequence is concentrated in bands along the active faults,with a strike of305 °,dipping SW with dip angle of 85 °. By using P-wave first motion symbols, we obtained the average focal mechanism of M ≥ 3. 5 earthquakes,with a strike 308 ° and dip 84 ° for nodal plane II. The field geological survey and research show that the strike,dip and rake of nodal plane II are roughly consistent with the occurrence of the Shuangxi-Jiaoxi fault. The comprehensive analysis reveals that the NW-trending Shuangxi-Jiaoxi fault is the seismogenic structure of the earthquakes. 相似文献
9.
The mainshock and aftershocks of the Hutubi MS6.2 earthquake on December 8, 2016 were relocated by applying the double difference method, and we relocated 477 earthquakes in the Hutubi region.The earthquake relocation results show that the aftershocks are distributed in the east-west direction towards the north side of the southern margin of the Junggar Basin fault, and are mainly distributed in the western region of the mainshock. The distance between the mainshock after relocation and the southern margin of the Junggar Basin fault is obviously shortened. Combined with the focal mechanism and the spatial distribution of the mainshock and aftershocks, it is inferred that the southern margin of the Junggar Basin fault is the main seismogenic structure of the Hutubi earthquake. 相似文献
10.
On March 11, 2011, a MW9.0 earthquake occurred in the Japan Trench, causing tremendous casualties, and attracting extensive concern. Based on the results of related research, this paper analyzes the observations, phenomena and understandings of the earthquake from varied aspects, and obtains four main conclusions. (1) The earthquake, occurring in the subduction zone in the Japan Trench located in the northwest boundary of the pacific plate has two zones of concentrated coseismic slip at different depths, and the slip in the deep zone is relatively small. Though there have been many M7.0 historical earthquakes, slips in the shallow zone are large, but there have been few historical strong earthquakes. (2) Constrained by GPS data, the study of fault movement shows that fault movement in the Japan Trench has a background of widely distributed stability and locking (the locking zone is equivalent that of coseismic rupture zone). Perturbation occurred after the 2008 M8.0 Hokkaido earthquake, several M7.0 events had after slips larger than the coseismic slip, and two obvious slow slip events were recorded in 2008 and 2011. Eventually, the March 9, 2011 M7.0 foreshock and the March 11, 2011 MW9.0 mainshock occurred. The pre-earthquake changing of the fault movement in the Japan Trench is quite clear. (3) Traditional precursory observation show no obvious anomaly, possibly due to monitoring reason. Anomaly before earthquake consists of high stress state in focal zone reflected by some seismic activity parameters, short period anomaly in regional ground motion, etc. (4) The analysis of physical property in focal zone aroused more scientific issues, for example, is there obvious difference between physical property in focal zone and its vicinity? Does frictional property of fault determine seismogenic ability and rupture process? Whether pre-earthquake fault movement include pre-slips? Could deep fluid affect fault movement in focal zone? Experience is the best teacher, and authors hope this paper could be a modest spur to induce others in basic research in earthquake forecast and prediction. 相似文献
11.
Liu Jianming Wang Qiong Nie Xiaohong Gao Ge Zhang Linlin Zhang Zhiguang Xiang Yang 《中国地震研究》2017,31(3):381-394
This paper introduces the basic parameters, focal mechanism solutions and earthquake sequence characteristics of the Kalpin MS5.3 earthquake sequence of December 1, 2013, and analyzed seismic activity before the earthquake, the adjacent tectonic features and the precursory anomaly at fixed points within a range of 200km. Research indicates:(1) The earthquake occurred on Kalpin fault, the source rupture type is thrust faulting with sinistral strike-slip component. (2) The earthquake sequence is mainshock-aftershock type, with the aftershock distribution attenuating quickly and trending NE. (3) Abnormal seismic activity before the earthquake was characterized by seismically nesting quiescence of MS2.0-4.0 earthquakes, seismic quiescence of MS4.0 earthquakes and seismic belts of MS3.0 earthquakes in the Kalpin block, abnormal enhancement zone of moderate earthquakes on Puchang fault and seismological parameters. (4) Anomalies of precursory observation data at fixed stations are mainly characterized by mutation. Apart from the borehole tiltmeter in Halajun, the spatial distribution of other abnormal precursors showed a phenomenon of migration from the near field to far field and from the epicenter to the peripheries. 相似文献
12.
2018年9月4日新疆伽师发生MS5.5地震，震中处于塔里木地块西北缘，位于1997~1998年伽师强震群震区内。此次伽师地震前发生了MS4.7前震，截至9月30日最大余震震级为MS4.6（ML5.0），初步判定为前-主-余型地震序列。序列精定位结果显示，余震沿近NE向展布，主震震源深度与1997~1998年伽师强震主震基本一致，发震断层陡立。本文从区域的构造环境、地震震源机制解和余震分布特征等方面分析认为，地震发生在伽师隐伏断裂东南端部，为1997~1998年伽师强震群震区的一次新的构造活动。序列参数、视应力等计算结果显示，伽师MS5.5地震的预测最大余震震级与最大余震震级MS4.6接近，表明序列最大余震已经发生。 相似文献
13.
利用匹配定位方法对2020年5月18日云南巧家M_S5.0地震震后24h震源附近台站记录的连续波形进行遗漏地震扫描和定位,共识别出327个地震事件,约为台网目录的2.4倍,最小完整震级由最初的M_L1.9降至M_L1.1。随后,依据最新目录计算了震后震源区的b值,并结合余震展布形态,初步分析此次地震发震构造。研究结果显示,余震序列在平面上显示出NNW-SSE优势展布方向,长度约14km,震源优势深度集中在3～15km;深度剖面展示出主震的发震断层面较陡,并且具有向西倾的趋势。综合主震震源机制解、余震展布形态和周边地质构造背景,认为巧家M_S5.0地震发震断层可能为NNW-SSE向走滑性质的断裂,与2014年鲁甸MS6.5地震的发震构造密切相关。 相似文献
14.
2022年1月8日青海省海北州门源县发生MS6.9地震,震中距离2016年1月21日门源MS6.4地震震中约33km,两次门源地震均发生在冷龙岭断裂附近,但在震源机制、主发震断层破裂过程及地震序列余震活动等方面显著不同。针对两次门源地震序列的比较分析,对研究冷龙岭断裂及其附近区域强震序列和余震衰减特征等具有重要研究意义。通过对比分析2022年门源MS6.9地震和2016年门源MS6.4地震余震的时空演化特征,发现二者在震源过程和断层破裂尺度上存在明显差异,前者发震断层破裂充分,震后能量释放充分,余震丰富且震级偏高;而后者发震断层未破裂至地表,余震震级水平偏低。综合分析两次门源地震序列表现出来的差异性,认为其可能与地震发震断层的破裂过程密切相关,且同时受到区域构造环境的影响。 相似文献
15.
2017年8月9日精河发生MS6.6地震，随后发生一系列余震。本文采用PTD方法和新疆测震台网分析的震相数据，基于新疆“2015地壳速度模型”，计算了该地震序列的震源深度，得到MS6.6主震震源深度约为14km，MS≥2.5余震深度为9～18km。所有震相数据来自中国地震台网中心编目数据库。 相似文献
16.
采用双差定位方法，利用中国地震台网的数据对2017年8月9日精河6.6级地震的余震序列进行了重新定位。截至2017年8月14日16时，共获得209个余震的重新定位结果。结果显示，余震主要呈近EW向或NWW向分布，余震区长约50km，宽约17km。余震分布在主震的西侧，推断此次地震单侧破裂。余震震源深度为1～25km，其中，震级较大余震深度为8～17km。精河地震序列的余震活动随时间呈起伏状衰减，震后2天内比较活跃，此后出现较快衰减。随时间推移，余震区呈现中西部衰减慢、东部衰减快的特点。此次地震震中距2011年精河5.0级地震震中21km，相比2011年精河地震，其震源更深，震级更大，但震源机制解相近，均为逆冲型。结合区域构造背景分析认为，库松木契克山前断裂为此次地震发震构造的可能性较大。 相似文献
17.
帕米尔高原位于地中海－喜马拉雅地震带上，晚新生代以来随着印度板块向欧亚板块持续不断地挤压汇聚，其构造运动是欧亚大陆最强烈的地区。高原腹地发育一系列近SN向正断层，包括近SN向的塔什库尔干正断层所处的帕米尔中部现代区域的构造应力场以EW向水平拉张为主。2016年11月25日发生的阿克陶MS 6.7级地震的发震构造为塔什库尔干断层分支的NWW向木吉盆地北缘断层，其具有右旋走滑兼正断性质。地震在震中附近产生同震地表形变带，全长约1km，呈近SN－NNE向水平拉伸，发育近EW—NWW向的张裂缝，为地震破裂的产物，张裂缝的最大水平拉伸位移量和最大垂直位移量分别为46cm和16cm。地表破裂带中的NE和NW向张剪裂缝只是连接贯通这些雁列的张裂缝，其水平相对位移量取决于张裂缝的水平拉伸量和张裂缝之间的几何关系。地表形变带表现的拉张性质与帕米尔高原腹地区域现代应力场最大主压应力为垂直向基本一致，可能与深部热物质上涌造成的上地壳拉伸有关。而地表形变带呈近SN向水平拉张，与区域近EW向拉张应力场之间存在显著差异，这可能是木吉盆地北缘右旋走滑正断层阶区局部应力场调整的结果。 相似文献
18.
2018年9月12日19时6分,陕西省汉中市宁强县发生5.3级地震,不同机构给出的震源深度结果相差较大。为进一步确定宁强5.3级地震的震源深度,基于区域速度模型,首先利用CAP方法反演得到该地震的震源机制解,然后采用瑞利面波振幅谱和CAP深度误差函数联合反演,进一步测定了此次地震的矩心深度。结果显示:CAP方法得到的陕西宁强5.3级地震矩心深度约为12km,瑞利面波振幅谱测定的矩心深度为13km,结合引入的误差函数联合反演,最终确定陕西宁强5.3级地震的矩心深度为13km左右,表明此次地震仍属于发生于上地壳的地震。 相似文献