共查询到17条相似文献，搜索用时 109 毫秒
1.
银川盆地是华北克拉通西部构造活动较为强烈的一个新生代断陷盆地.为了研究银川盆地的地壳浅部结构和活动断裂特征,我们利用2014年在银川盆地完成的深地震反射剖面数据,采用初至波层析成像方法得到了银川盆地高精度的基底P波速度结构和构造形态;考虑到仅根据速度结构剖面还难以确定断裂的准确位置、断层上断点埋深、断层的近地表构造组合样式等特征,研究中还采用浅层地震反射波勘探方法对银川盆地内的隐伏断裂和1739年平罗8.0级地震的地表破裂带浅部结构进行了高分辨率成像.研究结果表明:银川盆地与两侧地块的浅层P波速度结构和沉积盖层厚度差异较大,银川盆地总体呈现出明显的低速结构特征,盆地基底面起伏变化较大,基底最深处位于芦花台断裂和银川断裂之间的银川市下方,其深度约为7000~7200 m;贺兰山隆起区显示为明显的高速特征,地表出露中-古生代基岩地层,缺失新生代地层;鄂尔多斯地块西缘的浅层P波速度明显高于银川盆地,基底埋深相对较浅,推测其新生界地层厚度小于2500 m.浅层地震反射剖面揭示的地层反射界面形态和断裂的浅部构造特征非常清楚,黄河断裂、贺兰山东麓断裂、银川断裂和芦花台断裂不仅是错断盆地基底的断裂,而且还是第四纪以来的隐伏活动断裂,这些断裂的交替活动形成了"堑中堑"的盆地结构,并对银川盆地的形成、盆地内的新生代地层厚度和第四纪沉降中心具有重要的控制作用;在近地表这些断裂表现为由2~3条断层组成的"Y字形"断裂构造,且主断裂的最新活动可追踪至晚更新世末期或全新世,是构造继承性活动的结果.本文的研究结果不仅可为进一步分析银川盆地的基底结构、隐伏断裂特征和活动构造研究等提供新的地震学证据,而且还可为该区城市规划中避让活动断层提供科学依据. 相似文献
2.
彭州断裂是龙门山山前一条重要的隐伏断裂.为了调查彭州断裂的位置、性质及其活动性,5·12汶川MS8.0地震发生后,作者采用可控震源和高精度的地震反射勘探方法,对彭州隐伏断裂进行了高分辨率地震反射成像.本文利用获得的浅层地震剖面资料并结合石油地震反射剖面,给出了彭州断裂的空间展布特征以及断裂两侧的新生代地层厚度.结果表明,彭州断裂为一条走向NE、倾向NW、倾角约为58°～62°的逆断层,该断层向上错断了第四纪沉积层,具有明显的第四纪活动,向下大约在深度8～10 km左右收敛到向西缓倾的滑脱面之上.研究结果为评价断裂的活动性和灾后重建提供了地震学证据. 相似文献
3.
为研究隐伏断裂的近地表特征和第四纪活动性，在新乡-商丘断裂封丘段完成了2条高分辨率浅层地震反射剖面和1条钻孔联合地质剖面。通过地震反射剖面获得了新乡-商丘断裂封丘段深约1km以浅的地层及构造分布图像，其结果表明，新乡-商丘断裂封丘段浅部表现为由多条视倾向N的正断层组成的断裂体系，总体走向NWW,断层错断第四纪内部地层。钻孔联合地质剖面显示，该断裂向上错断的最新地层为浅棕红色-褐黄色黏土层，上断点埋深在57.00～61.50m之间。结合采集样品的测年结果判断，封丘段的最新活动时代为晚更新世中期。文中的研究结果可为重大工程选址、城镇规划与建设、震害预测与评估提供基础资料，对于探讨新乡-商丘断裂深浅构造关系、区域构造演化等地球动力学问题具有参考价值。 相似文献
4.
浅层地震勘探资料揭示汤东断裂特征 总被引：2，自引：2，他引：0
汤东断裂是汤阴地堑的东界断裂，也是太行山山前一条重要的隐伏活动断裂。为了查明汤东断裂的产状、性质及其浅部构造特征，跨断裂开展了高分辨率浅层地震剖面探测，获得了高信噪比的浅层地震反射波叠加剖面。本文根据浅层地震剖面结果并结合研究区地质资料和已有深地震探测成果，对汤东断裂的浅部构造特征进行了分析和讨论。结果表明:汤东断裂为1条走向NNE、倾向NWW的铲型正断层，其浅部表现为由2—3条断层组成的Y字形构造，并错断了埋深约30—50m第四纪地层，断裂向下延伸至上地壳底部，属晚第四纪以来的隐伏活动断裂。汤东断裂两侧新生代沉积差异明显，断裂上升盘内黄隆起一侧，新生代沉积层较薄，其底界埋深约480m，下降盘汤阴地堑一侧，沉积了巨厚的新生代地层。研究结果为确定汤东断裂位置、评价断裂的活动性提供了基础资料。 相似文献
5.
6.
《中国科学:地球科学》2017,(2)
位于南北构造带北段的贺兰山和银川盆地是华北克拉通西部的一个板内构造变形带和活动构造带,有着复杂的形成和演化历史,对该区复杂的地质构造和现代地震活动有着重要的控制作用.2014年初,跨银川盆地和贺兰山完成的长度135km的深地震反射剖面揭示了该区的岩石圈层结构和断裂的深浅构造特征.研究结果表明,沿剖面莫霍面埋深自东向西逐渐加深,地壳厚度40~48km,且不同构造部位的地壳反射结构图像、速度分布、壳内界面形态和莫霍面起伏存在着明显差异.深地震反射剖面揭示,贺兰山两侧有着不同的断裂构造特征,在贺兰山东侧,黄河断裂、贺兰山东麓断裂以及银川盆地内的多条隐伏断裂均为第四纪以来仍在活动的正断层,控制了银川盆地的新生代沉积,在剖面上呈"负花状"构造展布;在贺兰山西侧,巴彦浩特断裂和贺兰山西麓断裂在剖面上表现为东倾的逆冲断层,使得贺兰山隆起区的中生代地层发生褶皱、冲断和结构变形;地壳深断裂位于银川盆地的西侧,该断裂倾角陡直,向下错断中-下地壳和莫霍面,向上可能与两组上地壳断裂相联系;这套不同时期形成的走滑、逆冲和正断并存的深浅断裂系统是该区盆山耦合、地壳结构变形和壳幔结构变化的构造条件.深地震反射剖面揭示的另外一个重要现象是,在贺兰山和银川盆地之下还存在有一组强能量的上地幔反射波组(UMR),其界面深度约为82~92km,暗示该区上地幔中存在有速度跃变层或速度间断面,反映了该区上地幔结构的纵向不均匀性.探测结果为进一步分析研究华北克拉通西部复杂的深部结构、不同地块的结构差异和深浅构造关系等提供了地震学证据. 相似文献
7.
8.
9.
为了对昆明市活断层构造的深浅关系有更深入的了解,在浅层地震反射勘探的基础上,布设了一条东西向、横跨昆明盆地的中深层探测剖面KM4测线,通过对测线参数的试验与分析,确定了适合昆明盆地反射地震勘探的施工参数,采用该施工参数,开展了有效勘探深度为2～3 km的中深层反射地震勘探,确定了目标区隐伏活断层在盆地深部与盆地基底展布的异同及空间关系,探测到了昆明盆地深部断层的基本位置,确定了浅部断层与盆地基底断裂间的关系.对该测线的设计和参数采集试验分析,为城市和山区的活断层探测提供了宝贵的经验. 相似文献
10.
郯庐断裂带是中国东部最大的一个活动构造带,其内部结构非常复杂,不同区段表现出不同特征的构造样式.本文采用浅层地震反射波成像技术对郯庐断裂带宿迁段的近地表结构进行了高分辨率成像,利用该区已有的深地震反射剖面数据,采用初至波层析成像方法获得了郯庐断裂带的浅层P波速度结构.结果表明,郯庐断裂带宿迁段是一个由多条断裂以及凹陷和隆起构成的复杂构造带,且新生代地层厚度和地震波速分布明显受到断裂的影响与控制.郯庐断裂带的东、西两侧为基底隆起区,近地表速度结构呈现为明显的高速特征,新生代地层厚度小于200m.郯庐断裂带总体显示为低速凹陷结构,新生代地层厚度在300～600m之间变化,最厚处位于宿迁市的陵城镇附近.郯庐断裂带宿迁段主要由5条断裂构成,从这些断裂的上断点埋深和第四纪活动特征来看,郯庐断裂带的东边界断裂F_1和西边界断裂F_4的活动性相对较弱,为第四纪早期活动断裂.断裂F_2和F_3控制了郯庐断裂带内部的新生代凹陷,两者的活动时代分别为中更新世和晚更新世.安丘—莒县断裂F_5位于断裂F_1和F_2之间,由2条相向而倾的分支断层F_5和F_(5-1)构成,其活动时代分别为全新世和晚更新世.研究结果为进一步认识郯庐断裂带宿迁段的近地表特征及其活动性提供了新证据. 相似文献
11.
为了研究北京平原区的地壳结构特征、断裂的空间展布、断裂活动性以及深浅构造关系,在北京平原区的南部完成了1条长90 km的深地震反射剖面.探测结果表明,该区地壳以双程反射时间(TWT)6～7 s的强反射带Tc为界分为上地壳和下地壳,上地壳厚约18～19 km,下地壳厚约16～17 km,Moho界面深度约为34～35 km.该区结晶基底起伏变化较大,上、下地壳分界面和Moho界面都是一个具有一定厚度的过渡带.上地壳反射层位丰富,断裂构造发育,构造形态清晰.在夏垫断裂西北,剖面揭示了4～5组能量较强的反射震相,表现为典型的隆起区特征;在夏垫断裂东南,上部为一套向东南倾伏的密集强反射层,下部为一套形态各异、结构复杂的强反射层,这些反射具有典型的沉积盆地特征,盆地最深处约为11 km.剖面揭示的地壳深断裂倾角较陡,向上切穿了上、下地壳分界面,延伸到上地壳沉积盆地的底部,向下切穿了壳幔过渡带,与上部断裂和沉积盆地构成了独特的组合关系. 相似文献
12.
长度100 km、NW向穿过三河—平谷8.0级地震区和北京地区主要断裂构造的深地震反射剖面,揭示了该区地壳精细结构图像和断裂的深浅构造特征.结果表明,该区地壳以TWT6～7 s左右的强反射带为界分为上地壳和下地壳,上地壳厚约18～21 km,下地壳厚约13～15 km.剖面TWT3～4 s以上,反射层位丰富,构造形态清晰,且在剖面上具有明显不同的构造特征;在三河—平谷地震区以西,剖面揭示了2～3组反射能量较强的反射震相和一系列错断基底面的断裂,在三河—平谷地震区以东,为一套自东向西倾伏的密集强反射层,这套反射具有典型的沉积盆地特征,盆地最深处约为8～9 km.剖面揭示的地壳深断裂倾角陡直,该断裂切割、扰动了下地壳物质和壳幔过渡带,向上延伸至上地壳,将地壳深部构造与浅部断裂联系在一起,构成了该区最主要的深浅构造特征. 相似文献
13.
THE CRUSTAL SHALLOW STRUCTURES AND FAULT ACTIVITY DETECTION IN XINYI SECTION OF TAN-LU FAULT ZONE 
下载免费PDF全文
下载免费PDF全文 GU Qin-ping XU Han-gang YAN Yun-xiang ZHAO Qi-guang LI Li-mei MENG Ke YANG Hao WANG Jin-yan JIANG Xin MA Dong-wei 《地震地质》1979,42(4):825-843
The Tan-Lu fault zone is the largest active tectonic zone in eastern China, with a complex history of formation and evolution, and it has a very important control effect on the regional structure, magmatic activity, the formation and distribution of mineral resources and modern seismic activity in eastern China. Xinyi City has a very important position as a segmental node in the Shandong and Suwan sections of the Tan-Lu fault zone. Predecessors have conducted research on the spatial distribution, occurrence and activity characteristics of the shallow crustal faults in the Suqian section of the Tan-Lu belt, and have obtained some new scientific understandings and results. However, due to different research objectives or limitations of research methods, previous researches have either focused on the deep crustal structure, or targeted on the Suqian section or other regions. However, the structural style and deep-shallow structural association characteristics of Xinyi section of Tan-Lu belt have not been well illustrated, nor its activity and spatial distribution have been systematically studied. In order to investigate the shallow crustal structure features, the fault activities, the spatial distribution and the relationship between deep and shallow structures of the Xinyi section of the Tan-Lu Fault, we used a method combining mid-deep/shallow seismic reflection exploration and first-break wave imaging. Firstly, a mid-deep seismic reflection profile with a length of 33km and a coverage number greater than 30 was completed in the south of Xinyi City. At the same time, using the first arrival wave on the common shot record, the tomographic study of the shallow crust structure was carried out. Secondly, three shallow seismic reflection profiles and one refraction tomography profile with high resolution across faults were presented. The results show that the Xinyi section of Tan-Lu fault zone is a fault zone composed of five concealed main faults, with a structural pattern of “two grabens sandwiched by a barrier”. The five main faults reveal more clearly the structural style of “one base between two cuts” of the Tan-Lu fault zone. From west to east, the distribution is as follows: on the west side, there are two high-angle faults, F4 and F3, with a slot-shaped fault block falling in the middle, forming the western graben. In the middle, F3 and F2, two normal faults with opposite dip directions, are bounded and the middle discontinuity disk rises relatively to form a barrier. On the east side, F2 and F1, two conjugate high-angle faults, constitute the eastern graben. The mid-deep and shallow seismic reflection profiles indicate that the main faults of the Xinyi section of Tan-Lu fault zone have a consistent upper-lower relationship and obvious Quaternary activities, which play a significant role in controlling the characteristics of graben-barrier structure and thickness of Cenozoic strata. The shape of the reflective interface of the stratum and the characteristics of the shallow part of the fault revealed by shallow seismic reflection profiles are clear. The Mohe-Lingcheng Fault, Xinyi-Xindian Fault, Malingshan-Chonggangshan Fault and Shanzuokou-Sihong Fault not only broke the top surface of the bedrock, but also are hidden active faults since Quaternary, especially the Malingshan-Chonggangshan Fault which shows strong activity characteristics of Holocene. The results of this paper provide a seismological basis for an in-depth understanding of the deep dynamics process of Xinyi City and its surrounding areas, and for studying the deep-shallow tectonic association and its activity in the the Xinyi section of the Tan-Lu Fault. 相似文献
14.
汤阴地堑位于太行山脉与华北平原的过渡带，是太行山前重要的地质构造单元。为研究汤阴地堑上地壳结构和断裂特征，利用安阳市与新乡市活断层探测获得的深、浅地震反射剖面，结合研究区已有地震、地质资料，对汤阴地堑浅部结构、汤东断裂特征进行分析研究。结果表明，汤阴地堑北部与南部地壳结构差异明显。地堑北部是由汤东断裂控制的半地堑，地堑内反射震相丰富、反射波层组关系清晰，多组新生代、古生代沉积层强反射不整合地覆盖在自西向东倾伏的结晶基底反射Tg上，且随着深度增加，地层倾角增大，显示出明显的多期掀斜运动特征。地堑南部表现为由汤东、汤西断裂共同控制的断陷型地堑，地堑内新近系底界面反射波TN自西向东倾伏，其下为一些横向呈水平或东倾、延续性较短的反射震相。地堑南部与北部不同的反射震相特征表明，测线控制区域内的汤阴地堑沉积环境与运动特征可能有所差异。汤东断裂为走向NE，倾向NW的铲型正断层，汤西断裂为走向NE、倾向SE的正断层，北部中深层地震反射剖面上未发现该断层的存在。 相似文献
15.
采用深、浅地震反射相结合的探测方法,对临汾盆地的地壳结构和隐伏活动断裂进行了研究.结果表明,研究区地壳具有清晰的上、中、下地壳结构特征,其地壳厚度约为38~42 km.临汾盆地为典型的半地堑沉积盆地,盆地沉积层最深处约为5~6 km.莫霍面在临汾盆地下方出现约3 km的上隆,其展布形态与盆地基底呈“镜像”对应关系,显示出临汾盆地为拉张作用下的纯剪切盆地模式.深地震反射剖面揭示的一系列铲状或面状正断层在剖面上表现为“负花状”构造特征,其中,罗云山山前断裂和浮山断裂为临汾盆地的东、西边界控制断裂,具有规模大、切割深度深和多期活动的特点,对临汾盆地的形成、地层沉积和褶皱以及地震活动都有重要的控制作用.研究结果为深入理解该区的深部动力学过程、分析研究深浅构造关系、评价断裂的活动性提供了依据. 相似文献
16.
基于覆盖盐源盆地的短周期天然地震台阵和布设的一条人工地震测线所获得的地震数据,从中提取地震能量属性,并通过地震层析成像获得该地区的浅部地震速度结构,继而对短周期地震台阵一个月的噪声数据进行互相关得到经验格林函数,再通过时频分析获得相速度频散曲线,反演获得不同深度的S波速度分布。研究结果显示,盐源盆地地震特征主要分为三层:浅部为低速新生代沉积地层,P波速度为1.0—2.1 km/s,反射轴明显、连续性好,反射能量强,S波速度为中高南低,南部低速体与盐源断裂走向一致,新生代盆地整体呈南深北浅,沉积发育和构造形态受盐源断裂控制;中部为中低速三叠系地层,P波速度为3.5—4.5 km/s,反射轴不连续,反射能量较弱,S波速度逐渐变大,整体变化变小;深部为高速古生代地层,地震反射较为杂乱,反射能量弱;上地壳存在滑脱面,该界面为沉积盖层与结晶基底的分界面,且向浅部发育一系列断层,其中金河—箐河断裂为盐源盆地与康滇地块的分界线,这些断裂带也是盐源盆地地震频发的部位。 相似文献
17.
UPPER CRUSTAL VELOCITY STRUCTURE AND CONSTRAINING FAULT INTERPRETATION FROM SHUNYI-TANGGU REFRACTION EXPERIMENT DATA 下载免费PDF全文
下载免费PDF全文 The urban active fault survey is of great significance to improve the development and utilization of urban underground space, the urban resilience, the regional seismic reference modeling, and the natural hazard prevention. The Beijing-Tianjin metropolitan region with the densest population is one of the most developed and most important urban groups, located at the northeastern North China plain. There are several fault systems crossing and converging in this region, and most of the faults are buried. The tectonic setting of the faults is complex from shallow to deep. There are frequent historical earthquakes in this area, which results in higher earthquake risk and geological hazards. There are two seismicity active belts in this area. One is the NE directed earthquake belt located at the east part of the profile in northern Ninghai near the Tangshan earthquake region. The other is located in the Beijing plain in the northwest of the profile and near the southern end of Yanshan fold belt, where the 1679 M8.0 Sanhe-Pinggu earthquake occurred, the largest historical earthquake of this area. Besides, there are some small earthquake activities related to the Xiadian Fault and the Cangdong Fault at the central part of the profile.
The seismic refraction experiment is an efficient approach for urban active fault survey, especially in large- and medium-size cities. This method was widely applied to the urban hazard assessment of Los Angeles. We applied a regularized tomography method to modeling the upper crustal velocity structure from the high-resolution seismic refraction profile data which is across the Beijing-Tianjin metropolitan region. This seismic refraction profile, with 185km in length, 18 chemical explosive shots and 500m observation space, is the profile with densest seismic acquisition in the Beijing-Tianjin metropolitan region up to now. We used the trial-error method to optimize the starting velocity model for the first-arrival traveltime inversion. The multiple scale checker board tests were applied to the tomographic result assessment, which is a non-linear method to quantitatively estimate the inversion results. The resolution of the tomographic model is 2km to 4km through the ray-path coverage when the threshold value is 0.5 and is 4km to 7km through the ray-path coverage when the threshold value is 0.7. The tomographic model reveals a very thick sediment cover on the crystalline basement beneath the Beijing-Tianjin metropolitan region. The P wave velocity of near surface is 1.6km/s. The thickest sediment cover area locates in the Huanghua sag and the Wuqing sag with a thickness of 8km, and the thinnest area is located at the Beijing sag with a thickness of 2km. The thickness of the sediment cover is 4km and 5km in the Cangxian uplift and the Dacang sag, respectively. The depth of crystalline basement and the tectonic features of the geological subunits are related to the extension and rift movement since the Cenozoic, which is the dynamics of formation of the giant basins.
It is difficult to identify a buried fault system, for a tomographic regularization process includes velocity smoothing, and limited by the seismic reflection imaging method, it is more difficult to image the steep fault. Velocity and seismic phase variations usually provide important references that describe the geometry of the faults where there are velocity differences between the two sides of fault. In this paper, we analyzed the structural features of the faults with big velocity difference between the two sides of the fault system using the velocity difference revealed by tomography and the lateral seismic variations in seismograms, and constrained the geometry of the major faults in the study region from near surface to upper crust. Both the Baodi Fault and the Xiadian Fault are very steep with clear velocity difference between their two sides. The seismic refraction phases and the tomographic model indicate that they both cut the crystalline basement and extend to 12km deep. The Baodi Fault is the boundary between the Dachang sag and the Wuqing sag. The Xiadian Fault is a listric fault and a boundary between the Tongxian uplift and the Dachang sag. The tomographic model and the earthquake locations show that the near-vertical Shunyi-Liangxiang Fault, with a certain amount of velocity difference between its two sides, cuts the crystalline basement, and the seismicity on the fault is frequent since Cenozoic. The Shunyi-Liangxiang Fault can be identified deep to 20km according to the seismicity hypocenters.
The dense acquisition seismic refraction is a good approach to construct velocity model of the upper crust and helpful to identify the buried faults where there are velocity differences between their two sides. Our results show that the seismic refraction survey is a useful implement which provides comprehensive references for imaging the fault geometry in urban active fault survey. 相似文献
The seismic refraction experiment is an efficient approach for urban active fault survey, especially in large- and medium-size cities. This method was widely applied to the urban hazard assessment of Los Angeles. We applied a regularized tomography method to modeling the upper crustal velocity structure from the high-resolution seismic refraction profile data which is across the Beijing-Tianjin metropolitan region. This seismic refraction profile, with 185km in length, 18 chemical explosive shots and 500m observation space, is the profile with densest seismic acquisition in the Beijing-Tianjin metropolitan region up to now. We used the trial-error method to optimize the starting velocity model for the first-arrival traveltime inversion. The multiple scale checker board tests were applied to the tomographic result assessment, which is a non-linear method to quantitatively estimate the inversion results. The resolution of the tomographic model is 2km to 4km through the ray-path coverage when the threshold value is 0.5 and is 4km to 7km through the ray-path coverage when the threshold value is 0.7. The tomographic model reveals a very thick sediment cover on the crystalline basement beneath the Beijing-Tianjin metropolitan region. The P wave velocity of near surface is 1.6km/s. The thickest sediment cover area locates in the Huanghua sag and the Wuqing sag with a thickness of 8km, and the thinnest area is located at the Beijing sag with a thickness of 2km. The thickness of the sediment cover is 4km and 5km in the Cangxian uplift and the Dacang sag, respectively. The depth of crystalline basement and the tectonic features of the geological subunits are related to the extension and rift movement since the Cenozoic, which is the dynamics of formation of the giant basins.
It is difficult to identify a buried fault system, for a tomographic regularization process includes velocity smoothing, and limited by the seismic reflection imaging method, it is more difficult to image the steep fault. Velocity and seismic phase variations usually provide important references that describe the geometry of the faults where there are velocity differences between the two sides of fault. In this paper, we analyzed the structural features of the faults with big velocity difference between the two sides of the fault system using the velocity difference revealed by tomography and the lateral seismic variations in seismograms, and constrained the geometry of the major faults in the study region from near surface to upper crust. Both the Baodi Fault and the Xiadian Fault are very steep with clear velocity difference between their two sides. The seismic refraction phases and the tomographic model indicate that they both cut the crystalline basement and extend to 12km deep. The Baodi Fault is the boundary between the Dachang sag and the Wuqing sag. The Xiadian Fault is a listric fault and a boundary between the Tongxian uplift and the Dachang sag. The tomographic model and the earthquake locations show that the near-vertical Shunyi-Liangxiang Fault, with a certain amount of velocity difference between its two sides, cuts the crystalline basement, and the seismicity on the fault is frequent since Cenozoic. The Shunyi-Liangxiang Fault can be identified deep to 20km according to the seismicity hypocenters.
The dense acquisition seismic refraction is a good approach to construct velocity model of the upper crust and helpful to identify the buried faults where there are velocity differences between their two sides. Our results show that the seismic refraction survey is a useful implement which provides comprehensive references for imaging the fault geometry in urban active fault survey. 相似文献