共查询到20条相似文献，搜索用时 351 毫秒
1.
Wenshen Pong Zu-Hsu Lee Anson Lee 《地震工程与工程振动(英文版)》2006,5(1):49-60
This study focuses on the comparison of the Uniform Building Code （UBC） 1997 and International Building Code （IBC） 2003 in relation to the seismic design and analysis of special steel moment resisting frame buildings （SMRF）. This paper formulates a numerical study of a steel SMRF building, studied in four different situations, namely： as an office building in San Francisco; as an office building in Sacramento; as an essential facility in San Francisco, and as an essential facility in Sacramento. The analytical results of the model buildings are then compared and analyzed taking note of any significant differences. This case study explores variations in the results obtained using the two codes, particularly the design base shear and drift ratios as they relate to different locations and occupancy use. This study also proves that IBC 2003 is more stringent for the redundancy factor under design category E for the SMRF building, and drift limits for essential facilities. 相似文献
2.
Nonlinear response history analyses and use of strong ground motion data including near-field effects has become a common practice in both performance based design of tall buildings and design of base-isolated buildings. On the other hand, ordinary buildings are commonly analysed via response spectrum analysis following the rules of conventional seismic codes, most of which do not take near-field effects into account. This study evaluates the necessity and the adequacy of near-source factors for ordinary fixed-base buildings that are not specifically classified as tall, by comparing dynamic responses of 3, 8, and 15-story benchmark buildings obtained via(1) linear time history analyses using 220 record components from 13 historical earthquakes and 45 synthetic earthquake records of different magnitudes and fault distances and(2) response spectrum analyses in accordance with the Turkish Earthquake Code 2007-representing seismic codes not taking near-field effects into account- and the Uniform Building Code 1997 which takes near-field effects into account via near-source factors that amplify design response spectrum. It is shown that near-source factors are crucial for the safe design of not-so-tall ordinary fixed-base buildings but those defined in UBC97 may still not be adequate for those located in the vicinity of the fault. 相似文献
3.
Observations of damage due to the Kashmir earthquake of October 8, 2005 and study of current seismic provisions for buildings in Pakistan 总被引：5，自引：3，他引：2
On October 8, 2005 an earthquake of magnitude 7.6 (M
w) struck the Kashmir region of Pakistan causing widespread damage to buildings and infrastructure. This paper summarizes field
observations of building damage made by the Earthquake Engineering Field Investigation Team (EEFIT) after the event, where
the performance of residential, commercial and government buildings was investigated. A study of the seismic design provisions
currently in place in Pakistan is presented and compared with seismic provisions of EC8 (1998) and UBC (1997). Several problems
are identified for the implementation of the Pakistan seismic code in its current form and recommendations are made for its
improvement in order to be used for the reconstruction of affected areas. 相似文献
4.
抗震规范应用强度折减系数的现状及分析 总被引：4，自引：1，他引：4
世界上大多数的抗震规范都采用了基于强度的设计方法,强度折减系数是基于强度的抗震设计中确定设计地震力的关键因素,提高强度折减系数的可靠性已经被认为是提高现有抗震规范可靠性的有效途径。本文主要介绍了抗震研究处于世界先进水平的美国(UBC97)、欧洲(EC8)、日本、墨西哥、加拿大、中国等国家抗震规范中强度折减系数取值的有关规定,然后给出了各国学者关于规范规定的强度折减系数的一些重要讨论和分析,最后指出了世界各国应用强度折减系数过程中存在的不足,指出了需进一步研究的问题。 相似文献
5.
AshutoshBagchi 《地震工程与工程振动(英文版)》2004,3(2):223-236
This paper presents a simplified method of evaluating the seismic performance of buildings. The proposed method is based on the transformation of a multiple degree of freedom (MDOF) system to an equivalent single degree of freedom (SDOF) system using a simple and intuitive process. The proposed method is intended for evaluating the seismic performance of the buildings at the intermediate stages in design, while a rigorous method would be applied to the final design. The performance of the method is evaluated using a series of buildings which are assumed to be located in Victoria in western Canada, and designed based on the upcoming version of the National Building Code of Canada which is due to be published in 2005. To resist lateral loads, some of these buildings contain reinforced concrete moment resisting frames,while others contain reinforced concrete shear walls. Each building model has been subjected to a set of site-specific seismic spectrum compatible ground motion records, and the response has been determined using the proposed method and the general method for MDOF systems. The results from the study indicate that the proposed method can serve as a useful tool for evaluation of seismic performance of buildings, and carrying out performance based design. 相似文献
6.
大跨度钢桁架转换层结构的竖向地震反应分析 总被引：1，自引：1，他引：0
对某一带钢桁架转换层的复杂高层结构进行了有限元建模,分别采用振型分解反应谱法、时程分析法和《建筑抗震设计规范》(GB50011-2001)的设计反应谱法对大跨高位钢桁架转换层结构的竖向地震响应进行了分析.对采用振型分解反应谱法计算此类结构响应时所要选取的振型数及振型组合方法进行了探讨,并对规范采用10％的重力荷载代表值... 相似文献
7.
The need to investigate the level of seismic pounding risk of buildings is apparent in future building code calibrations. In order to provide further insight into the pounding risk of adjacent buildings, this study develops a numerical simulation approach to estimate the seismic pounding risk of adjacent buildings separated by a minimum code‐specified separation distance during a certain period of time. It has been demonstrated that the period ratio of adjacent buildings is an important parameter that affects the pounding risk of adjacent buildings. However, there is no specific consideration for the period ratio in the related seismic pounding provisions of the 1997 Uniform Building Code. Results also reveal that, for two adjacent buildings, the probability distribution of required distance to avoid seismic pounding fits very well with the type I extreme value distribution. Copyright © 2001 John Wiley & Sons, Ltd. 相似文献
8.
The accuracy of the three‐dimensional modal pushover analysis (MPA) procedure in estimating seismic demands for unsymmetric‐plan buildings due to two horizontal components of ground motion, simultaneously, is evaluated. Eight low‐and medium‐rise structures were considered. Four intended to represent older buildings were designed according to the 1985 Uniform Building Code, whereas four other designs intended to represent newer buildings were based on the 2006 International Building Code. The median seismic demands for these buildings to 39 two‐component ground motions, scaled to two intensity levels, were computed by MPA and nonlinear response history analysis (RHA), and then compared. Even for these ground motions that deform the buildings significantly into the inelastic range, MPA offers sufficient degree of accuracy. It is demonstrated that PMPA, a variant of the MPA procedure, for nonlinear systems is almost as accurate as the well‐known standard response spectrum analysis procedure is for linear systems. Thus, for practical applications, the PMPA procedure offers an attractive alternative to nonlinear RHA, whereby seismic demands can be estimated directly from the (elastic) design spectrum. In contrast, the nonlinear static procedure specified in the ASCE/SEI 41‐06 Standard is demonstrated to grossly underestimate seismic demands for some of the unsymmetric‐plan buildings considered. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
9.
This study focuses on the seismic performance of Ordinary Moment‐Resisting Concrete Frames (OMRCF) designed only for gravity loads. For this purpose, a 3‐story OMRCF was designed in compliance with the minimum design requirements in the American Concrete Institute Building Code ACI 318 (1999). This model frame was a regular structure with flexure‐dominated response. A 1/3‐scale 3‐story model was constructed and tested under quasi‐static reversed cyclic lateral loading. The overall behavior of the OMRCF was quite stable without abrupt strength degradation. The measured base shear strength was larger than the design base shear force for seismic zones 1, 2A and 2B calculated using UBC 1997. Moreover, this study used the capacity spectrum method to evaluate the seismic performance of the frame. The capacity curve was obtained from the experimental results for the specimen and the demand curve was established using the earthquake ground motions recorded at various stations with different soil conditions. Evaluation of the test results shows that the 3‐story OMRCF can resist design seismic loads of zones 1, 2A, 2B, 3 and 4 with soil types SA and SB . For soil type SC , the specimen was satisfactory in seismic zones 1, 2A, 2B and 3. For soil type SD , the OMRCF was only satisfactory for seismic zones 1 and 2A. Copyright © 2004 John Wiley & Sons, Ltd. 相似文献
10.
Comparison of DSHA-based response spectrum with design response spectrum of building code of Pakistan (BCP-SP-2007) for a site in Muzaffargarh area,Pakistan 
下载免费PDF全文
下载免费PDF全文 The building code of any country is considered to be a basic technical guidance document for the seismic design of structures. However, building codes are typically developed for the whole country, without considering site specific models that incorporate detailed site-specific data. Therefore, the adequacy of the design spectrum for building codes may sometimes be questionable. To study the sufficiency of the building codes of Pakistan (BCP-SP-2007), a deterministic seismic hazard analysis (DSHA) based spectrum was developed for a site in the Muzaffargarh area, Pakistan, using an updated earthquake catalogue, seismic source model, and a next generation attenuation model (NGA-WEST-2). Further, an International Building Code (IBC-2000) spectrum was developed for the study area to compare the results. The DSHA-based response spectrum resulted in a peak ground acceleration (PGA) value of 0.21 g for the Chaudwan fault. The evaluation of BCP-SP-2007 and IBC-2000 spectra provided a critical assessment for analyzing the associated margins. A comparison with the DSHA-based response spectrum showed that the BCP-SP-2007 design spectrum mostly overlapped with the DSHA spectrum unlike IBC-2000. However, special attention is needed for designing buildings in the study area when considering earthquake periods longer than 1 s, and the BCP-SP-2007 spectrum can be enhanced when considering a period range of 0.12–0.64 s. Finally, BCP-SP-2007 is based on a probabilistic approach and its comparison with deterministic results showed the significance of both methods in terms of design. 相似文献
11.
12.
Ioannis P. Christovasilis Andre Filiatrault Michael C. Constantinou Assawin Wanitkorkul 《地震工程与结构动力学》2009,38(4):477-496
The collapse of wood buildings was one of the main contributors to the heavy death toll and economic losses during the 1995 Hyogo‐ken Nanbu (Kobe) earthquake in Japan. In California, half of the property loss from the 1994 Northridge earthquake was attributed to wood construction. Based on damage observed in recent earthquakes, the seismic vulnerability of existing wood buildings under maximum credible seismic events is uncertain. The main objective of this study is to quantify the seismic collapse fragilities and collapse mechanisms of a two‐story townhouse and three‐story woodframe apartment building through numerical analyses. Three construction quality variants (poor, typical and superior) were considered for each building in order to assess the effects of construction qualities on seismic collapse fragilities. The buildings were also re‐designed according to the 2006 edition of the International Building Code to quantify the seismic fragilities of modern woodframe construction. The results obtained suggest that the construction quality, excitation direction and wall finish materials can influence significantly the collapse fragilities of woodframe buildings. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
13.
IntroductionInChina,thecombinationofseismicdesigncodewithzoningmapofseismicintensityorgroundmotionparametersisusuallyadoptedtodeterminetheseismicfortificationcriterionforthegeneralindustryandcivilbuildings.Thepresentproceduresareasfollows.Accordingtothepro-jectlocation,thedesignbasicaccelerationofgroundmotionandthedesigncharacteristicperiodofresponsespectrumareobtainedfromthezoningmapofseismicgroundmotionparameters(GeneralAdministrationofQualitySupervision,InspectionandQuarantineofthePeople… 相似文献
14.
Stavros A. Anagnostopoulos Christina Alexopoulou Kyriakos G. Stathopoulos 《地震工程与结构动力学》2010,39(5):521-540
This paper presents evidence that the extension of conclusions based on the widely used simplified, one story, eccentric systems of the shear‐beam type, to actual, nonsymmetric buildings and consequent assessments of the pertinent code provisions, can be quite erroneous, unless special care is taken to match the basic properties of the simplified models to those of the real buildings. The evidence comes from comparisons of results obtained using three variants of simplified models, with results from the inelastic dynamic response of three‐ and five‐story eccentric buildings computed with detailed MDOF systems, where the members are idealized with the well‐known plastic hinge model. In addition, a convincing answer is provided on a pertinent hanging controversy: For frame‐type buildings, designed in accordance with the dynamic provisions of modern codes (such as EC8 or IBC2000), which allow reduced shears at the stiff edge due to torsion, the frames at the flexible sides are the critical elements in terms of ductility demands. Copyright © 2009 John Wiley & Sons, Ltd. 相似文献
15.
根据最近几次的近断层地震观测记录研究显示，在现行结构抗震设计规范中很少考虑近断层效应的影响，对于缺乏近断层强震观测资料地区，抗震设计规范的改进方法及近断层效应的设计参数还没有统一结论. 本文基于UBC97近断层因子设计理念， 在收集世界范围内近断层观测记录的基础上，按场地和震级进行分类，建立了中长周期关键点处的加速度谱需求的衰减关系式，推导给出了缺乏近断层观测资料地区近断层影响因子的震级和断层距的关系式. 并以我国现行的建筑抗震设计规范为基础，建议了近断层影响因子的参考取值和修正后的反应谱曲线，为我国结构抗震设计提供了参考. 相似文献
16.
Design seismic forces depend on Peak Ground Acceleration (PGA) values and on the shape of Response Spectrum (RS) curves dictated by Building Codes or which need to be evaluated in every particular case. The PGA values and RS curves strictly depend on earthquake magnitude and distance, as well as on the regional and local geological conditions. At present, there is no doubt that it is necessary to construct so-called “Site & Region-specific” Building Code provisions reflecting the influence of different magnitude events at different distances that may occur during the life time of the construction, as well as the variety of local ground conditions. A scheme of Uniform Hazard Response Spectra and PGA estimation considering local site response is described in this paper. The assessments of these design parameters are obtained on the basis of Uniform Hazard Fourier spectra using the conception of “dominant earthquakes”. The effect of local geology is included by means of the soil/reference site spectral ratios. 相似文献
17.
Building damage in Dujiangyan during Wenchuan Earthquake 总被引：2，自引：1，他引：1
A field damage survey of 1,005 buildings damaged by the Wenchuan Earthquake in Dujiangyan City was carried out and the resulting data was analyzed using the statistical method. It is shown that buildings that were seismically designed achieved the desired seismic fortification target; they sustained less damage than the non-seismically designed buildings. Among the seismically designed buildings investigated, RC frame buildings performed the best in terms of seismic resistance. Masonry buildings with a ground story of RC frame structure were the second best, and masonry buildings performed the worst. Considering building height, multistory buildings sustained more severe damage than high-rise buildings and 2- and 3-story buildings. Compared to residential buildings, public buildings, such as schools and hospitals, suffered more severe damage. 相似文献
18.
在重大工程的地震安全性评价工作中，根据概率法地震危险性分析得到的一致概率反应谱，与建筑抗震设计规范给出的设计反应谱常常不一致，有时甚至会有较大的差异．一致概率反应谱低于相应的规范反应谱时，可能会产生重大工程抗震设防标准低于一般工业与民用建筑抗震设防标准的问题．本文利用理想简化的潜在震源，对一致概率谱与规范设计反应谱之间的关系进行了讨论．分析结果表明，对于较为普遍的主要受直下型地震和近震潜源影响的地区，在长周期部分，一致概率谱总体小于规范谱．规范谱长周期部分值得深入研究，且应尽可能与区划工作的概率法相结合．由于地震安全性评价工作存在较大的不确定性，故重大工程的抗震设防标准，据地震安全性评价结果将长周期部分降至规范谱（一般工民建）之下宜慎重． 相似文献
19.
Adding dampers is a commonly adopted seismic risk mitigation strategy for modern buildings, and the corresponding design procedure of dampers has been well established by the Chinese Building Code. Even though all types of dampers are designed by the same procedure, actual seismic performance of the building may differ from one to the others. In this study, a nine-story benchmark steel building is established, and three different and typical types of dampers are designed according to the Chinese Building Code to realize structural vibration control under strong earthquake excitation. The seismic response of the prototype building equipped with a viscoelastic damper, viscous damper and buckling-restrained brace(BRB) subjected to 10 earthquake records are calculated, and Incremental Dynamic Analysis(IDA) is performed to describe progressive damage of the structure under increasing earthquake intensity. In the perspective of fragility, it shows that the viscoelastic damper has the highest collapse margin ratio(CMR), and the viscous damper provides the best drift control. Both the BRB and viscoelastic dampers can effectively reduce the floor acceleration responses in the mid-rise building. 相似文献
20.
Performance-Based Seismic Design is now widely recognized as the pre-eminent seismic design and assessment methodology for
building structures. In recognition of this, seismic codes may require that buildings achieve multiple performance objectives
such as withstanding moderate, yet frequently occurring earthquakes with minimal structural and non-structural damage, while
withstanding severe, but rare earthquakes without collapse and loss of life. These objectives are presumed to be satisfied
by some codes if the force-based design procedures are followed. This paper investigates the efficacy of the Eurocode 8 force-based
design provisions with respect to RC frame building design and expected seismic performance. Four, eight, and 16-storey moment
frame buildings were designed and analyzed using the code modal response spectrum analysis provisions. Non-linear time-history
analyses were subsequently performed to determine the simulated seismic response of the structures and to validate the Eurocode
8 force-based designs. The results indicate the design of flexural members in medium-to-long period structures is not significantly
influenced by the choice of effective member stiffness; however, calculated interstorey drift demands are significantly affected.
This finding was primarily attributed to the code’s enforcement of a minimum spectral ordinate on the design spectrum. Furthermore,
design storey forces and interstorey drift demand estimates (and therefore damage), obtained by application of the code force-based
design procedure varied substantially from those found through non-linear time-history analysis. Overall, the results suggest
that though the Eurocode 8 may yield life-safe designs, the seismic performance of frame buildings of the same type and ductility
class can be highly non-uniform. 相似文献