首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到18条相似文献,搜索用时 156 毫秒
1.
利用DE算法反演地壳速度模型和地震定位   总被引:8,自引:3,他引:8       下载免费PDF全文
利用差异演化(Differential Evolution)非线性全局优化算法,设计了一种反演地壳速度模型和进行地震定位的方法,并给出了反演结果的具体分析.利用有限差分算法计算速度模型的走时场,可以节省大量的计算量,加快计算过程.反演得到的地壳速度模型和地震的震源参数可以直接用于地震层析成像研究,还可以利用地震层析成像得到的三维速度结构对地震重新定位,从而得到较为精确的震源参数.地壳速度模型的反演方法也可以用于三维速度结构的反演.  相似文献   

2.
近场爆炸地震优化定位方法研究   总被引:2,自引:0,他引:2       下载免费PDF全文
李学政  雷军 《地震学报》2001,23(3):328-333
地震定位是地震学中的反演问题之一 .准确的震源位置是研究地震动态图象、构造与地震活动关系的基础 ,是地震的重要参数 ,也是研究强震余震空间分布的基础资料 .地震定位的精度主要依赖于地壳速度模型的可靠性、台网布局合理程度、走时的准确性和定位方法 (赵仲和 ,1 983;朱元清 ,赵仲和 ,1 997;李学政等 ,1 999) .速度模型的可靠性程度如何直接影响定位结果的优劣 ;合理的台网布局可提高定位精度 ,否则会造成病态方程 ,引起较大的定位误差 ;走时不准 ,如震相误判、时间服务器不准 ,引起实测走时误差 ,致使定位结果和实际震源位置不吻合 ;不…  相似文献   

3.
中国地震台网初至P波区域三维走时表的建立   总被引:1,自引:0,他引:1       下载免费PDF全文
基于LLNL-G3Dv3全球P波三维速度模型,应用FMM软件包计算并建立了中国地震台网990个台站的初至P波区域三维走时表.该走时表覆盖了以台站为中心的水平向20°×20°、 垂直向-5.1—80 km (向下为正)的三维空间. 其水平向间隔为0.2°,垂直向间隔为5 km.这样对于任一深度小于80 km的震源,均可以应用此三维走时表计算其到周围10°范围内台站的走时.中国地震台网初至P波区域三维走时表的建立,对于改善区域初至P波走时预测,提高地震定位精度有一定现实意义.   相似文献   

4.
利用2002年1月至2008年12月天津地震台网产出的初至P波走时资料,通过震源与速度结构联合反演算法,计算出天津及邻近地区三维P波速度结构的优化模型,同时获得1 738次中小地震的重新定位结果.结果表明,天津及邻近地区中小地震分布具有与强震相同的地壳深部介质背景,主要分布在高低速度过渡带;天津及邻近地区中小地震震源深度重新定位后更集中分布在10-15 km深度范围内.  相似文献   

5.
三维复杂速度模型的交切法地震定位   总被引:3,自引:2,他引:1       下载免费PDF全文
周建超  赵爱华 《地球物理学报》2012,55(10):3347-3354
地震定位是地震监测与减灾研究重要基础.基于均匀或横向均匀介质模型,利用震源轨迹确定震源位置的交切法具有稳健和效率高的优点,但定位精度较低,特别是震源深度.为提高震源定位精度,我们提出适用于三维复杂速度模型的地震定位交切法.将地壳速度模型由均匀或横向均匀介质模型扩展为三维复杂速度模型;均匀或横向均匀介质模型对应的原假设为球面或双曲面的震源轨迹通过最小走时树射线追踪技术予以确定.确定震源位置的震源轨迹以到时差作为约束条件;将震源定位于震源轨迹交汇最密集的点处,即总的到时差残差(RDT)最小的点处.定位结果的不确定性可通过RDT值较小节点的空间分布予以定性表示.考察了准确速度模型、扰动速度模型、扰动观测到时及地震在台网外等4种情况下改进方法的地震定位效果,结果表明改进的交切法可用于三维复杂速度模型的地震定位;综合利用P波与S波的到时差信息,可明显改善震源位置约束;使用多条震源轨迹进行定位,有助于减少由随机因素导致的定位误差.  相似文献   

6.
利用三维高斯射线束成像进行地震定位   总被引:1,自引:1,他引:0       下载免费PDF全文
常规的地震定位方法通常需要拾取地震记录的初至,当初至不明显或被较高水平的噪声淹没时精度较低.本文采用基于三维高斯射线束的偏移成像方法对震源进行定位,较好地解决了该问题.通过三维高斯射线束对台站记录进行偏移归位,并将各台站成像结果的交点作为地震能量释放的中心位置;当各台站成像结果不能交于一点时,采用三维空间高斯滤波方法可实现震源位置的自动获取.提出的变网格计算方案极大地减少了计算量,显著地提高了成像精度和计算效率.利用首都圈地震台网数据,对涿鹿、滦县以及房山三个地震事件进行试算,结果表明:基于变网格三维高斯束偏移成像的地震定位方法自动化程度很高,而且具有较好的抗噪能力,特别适合处理低信噪比资料的地震定位问题.  相似文献   

7.
单纯形定位方法在新疆数字地震台网的测定精度分析   总被引:1,自引:0,他引:1  
地震定位是地震学中最基本的问题之一,现阶段大部分采用基于走时的方法。单纯形定位方法作为一种直接搜索类的方法,在新疆测震台网日常地震目录产出中发挥了重要作用。本文采用数值模拟的方法,利用新疆测震台网现有布局,结合“3400”走时表,分析单纯形定位方法在新疆测震台网的测定精度。研究表明,对于新疆测震台网网内浅源地震,单纯形定位方法能够得出较为精确的震中位置,而得出的网外地震震中位置存在一定偏差;初至折射波对震源深度有一定的控制能力,速度模型的准确性对震源深度和发震时刻的测定影响较大。  相似文献   

8.
传统地震定位方法利用震源轨迹确定震源位置,但基于均匀或横向均匀介质模型必然导致定位误差。为此对传统方法进行改进,发展适用于三维复杂地壳速度模型的地震定位交切法。利用最小走时树射线追踪技术,以离散方式准确计算三维复杂地壳速度模型中的震源轨迹,将震源定位于震源轨迹交汇的密集点。将该方法应用于云南地区地震重定位,得到较高定位精度。  相似文献   

9.
干涉走时微地震震源定位方法   总被引:5,自引:3,他引:2       下载免费PDF全文
本文基于地震波场干涉原理,建立了干涉走时微地震震源定位方法.该方法将两个接收点相对于一个微地震事件的走时差(称为干涉走时)的扰动作为残差函数,通过迭代求解最小残差函数,最终获得震源的空间位置.干涉走时震源定位方法利用两个接收点的到时差消除发震时刻未知和速度模型误差的影响,简化了震源定位算法.数值计算表明,本文提出的干涉走时定位方法在速度模型有误差的情况下仍然可以获得准确的微地震震源定位.  相似文献   

10.
杨旭  李永华 《地震学报》2020,42(2):121-134
本文利用中国数字测震台网和流动台站的地震资料,基于参数优化的AICD自动拾取算法和质量评估方案得到了高质量的震相到时,并在此基础上使用一维、三维定位方法对腾冲地区的799次地震事件进行了重新定位。定位结果显示:水平方向上,一维、三维重定位结果相差较小;深度方向上,三维定位的震源成丛分布比一维定位结果更加密集,地震主要位于地壳内低速层之上。分别利用一维、三维定位方法对典型地震、人工震源进行定位,结果表明,三维定位的精度明显优于一维定位,其在水平、深度方向上的平均绝对定位误差分别为0.7 km和1.3 km。   相似文献   

11.
综合运用四川省地震台网与紫坪铺水库地震台网的观测资料,精确地测定了2008年5月12日汶川MW7.9地震的震源位置与发震时刻.指出,对汶川地震这样的大地震精准定位,必须克服或尽量减少远台观测对地震精确定位的局限性、地壳介质模型的不完善性以及识别与检测初至波震相的不一致性等因素的影响.通过分析对比、反复试验,从上述台网中精心选取了方位分布均匀、具有近震源台站约束、直达P波震相确系由初始破裂辐射出的15个地震台的直达P波到时数据,反演得出精确度比区域性地震台网常规测定的精确度高一个数量级的汶川大地震的定位结果,即:发震时刻(北京时间):2008年5月12日14:27:57.59plusmn;0.03 s;震中位置:31.018deg;Nplusmn;0.3 km,103.365deg;Eplusmn;0.3 km;震源深度:15.5 kmplusmn;0.3 km.   相似文献   

12.
The conventional intersection method for earthquake location in isotropic media is developed in the case of transversely isotropic media with a tilted symmetry axis (TTI media). The hypocenter is determined using its loci, which are calculated through a minimum travel time tree algorithm for ray tracing in TTI media. There are no restrictions on the structural complexity of the model or on the anisotropy strength of the medium. The location method is validated by its application to determine the hypocenter and origin time of an event in a complex TTI structure, in accordance with four hypotheses or study cases: (a) accurate model and arrival times, (b) perturbed model with randomly variable elastic parameter, (c) noisy arrival time data, and (d) incomplete set of observations from the seismic stations. Furthermore, several numerical tests demonstrate that the orientation of the symmetry axis has a significant effect on the hypocenter location when the seismic anisotropy is not very weak. Moreover, if the hypocentral determination is based on an isotropic reference model while the real medium is anisotropic, the resultant location errors can be considerable even though the anisotropy strength does not exceed 6.10%.  相似文献   

13.
地震定位研究及应用综述   总被引:10,自引:1,他引:10  
地震定位是地震学中最经典、最基本的问题之一,提高定位精度也一直是地震学应用研究的重要课题之一。本文就目前各种地震定位方法进行了大体分类并概述了基本原理及其应用,介绍了目前在国内各实时地震观测系统中应用的台网定位方法,同时将部分台网方法应用于黑龙江省绥棱爆破的定位。  相似文献   

14.
林仙坎 《中国地震》2004,20(3):276-284
针对地壳内部的网外地震震源的定位问题,由震相组合成不同的方程组,利用均值寻查定位法迭代求解。在选取地球物理参数模型时,考虑了台湾地震部门定位时所用的模型和华南地区地震走时表等。利用福建数字地震台网记录到的绕射波Pn、Sn的到时资料,通过定位程序测定了134个位于台湾区域的壳内地震的震源位置。测定结果与台湾地震部门在其网址上公布的结果进行比对.平均震中位詈相差9km.震源深度相差8km.  相似文献   

15.
Because ambient seismic noise provides estimated Greenos function (EGF) between two sites with high accuracy, Rayleigh wave propagation along the path connecting the two sites is well resolved. Therefore, earthquakes which are close to one seismic station can be well located with calibration extracting from EGF. We test two algorithms in locating the 1998 Zhangbei earthquake, one algorithm is waveform-based, and the other is traveltime-based. We first compute EGF between station ZHB (a station about 40 km away from the epicenter) and five IC/IRIS stations. With the waveform-based approach, we calculate 1D synthetic single-force Greenos functions between ZHB and other four stations, and obtain traveltime corrections by correlating synthetic Greenos functions with EGFs in period band of 10-30 s. Then we locate the earthquake by minimizing the differential travel times between observed earthquake waveform and the 1D synthetic earthquake waveforms computed with focal mechanism provided by Global CMT after traveltime correction from EGFs. This waveform-based approach yields a location which error is about 13 km away from the location observed with InSAR. With the traveltime-based approach, we begin with measuring group velocity from EGFs as well as group arrival time on observed earthquake waveforms, and then locate the earthquake by minimizing the difference between observed group arrival time and arrival time measured on EGFs. This traveltime-based approach yields accuracy of 3 km, Therefore it is feasible to achieve GT5 (ground truth location with accuracy 5 km) with ambient seismic noises. The less accuracy of the waveform-based approach was mainly caused by uncertainty of focal mechanism.  相似文献   

16.
Romania is an earthquake prone area with a few destructive earthquakes per century. The National Institute for Earth Physics carries out the seismic survey of Romania through the Romanian National Seismic Network (RNSN) consisting of 65 real-time seismic stations. Daily reports and monthly bulletins are delivered after routinely analyzing and processing the recorded data. In the present paper we applied the Seismic Network Evaluation through Simulation method for the RNSN configuration as it was in August 2011 to estimate the background noise level, assess the appropriateness of the velocity model adopted in routine location procedure, evaluate the hypocenter location uncertainty and determine the detection magnitude threshold. Areas of greater (southern Romania) and lower (Carpathians and Apuseni Mountains) background noise within the RNSN are identified by mapping the average power of noise in 1–12?Hz frequency range. The statistical study of the P and S phases residual times allow us to assess the appropriateness of the velocity model used in routine location. Both P- and S-wave velocity models can be optimized to improve the quality of the hypocenter location. As shown by our analysis, the RNSN is able to detect and locate earthquakes with M L magnitude above 2.5 anywhere on the Romanian territory, except the border areas, such as the Crisana–Maramures seismic source zone. Merging data from both sides of the border significantly improves the quality of hypocenter location in these areas.  相似文献   

17.
According to earthquake catalog records of Fujian Seismic Network, the T now method and the four-station continuous location method put forward by Jin Xing are inspected by using P-wave arrival information of the first four stations in each earthquake. It shows that the four-station continuous location method can locate more seismic events than the T now method. By analyzing the results, it is concluded that the reason for this is that the T now method makes use of information from stations without being triggered, while some stations failed to be reflected in earthquake catalog because of discontinuous records or unclear records of seismic phases. For seismic events whose location results can be given, there is no obvious difference in location results of the two methods and positioning deviation of most seismic events is also not significant. For earthquakes outside the network, the positioning deviation may amplify as the epicentral distance enlarges, which may relate to the situation that the seismic stations are centered on one side of epicenter and the opening angle between seismic stations used for location and epicenter is small.  相似文献   

18.
本文将拟牛顿法与信赖域法相结合的反演方法用于地震震中和一维速度结构的联合反演. 通过数值试验比较发现:用拟牛顿法构造Hessian矩阵,虽然仅利用目标函数的一阶导数信息, 但由于保证了正定性和拟牛顿条件, 比解析求得Hessian矩阵更加高效稳定, 通过与信赖域方法的结合,使得该联合反演方法与经典的联合反演方法相比不仅具有较高的计算效率和较高的反演精度,同时也具有更强的总体收敛性.利用本文方法对台湾集集地震重新定位结果(纬度2386°N, 经度12080°E, 深度10km, 发震时刻1999年9月21日17:47:160)与前人主流结果一致.此外,该方法对不同初始速度模型以及不同的地震到时数据集均可给出较一致的结果,进一步表明该方法的优越性.本文还利用1998~2001年间华北遥测地震台网40个台站记录到的64次地震的971条P直达波和首波到时资料,采用本文提出的方法吩北京及其邻区的一维地壳P波速度结构进行联合反演, 结果表明该地区浅层地壳速度较低,中部地壳速度较高, 下部地壳速度逐渐递增.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号