共查询到20条相似文献,搜索用时 156 毫秒
1.
2.
相干体技术是目前应用最为广泛的地震解释技术之一,已由第一代互相关算法(C1)、第二代多道相似算法(C2)发展到第三代多道特征值相干算法(C3).常规的基于特征值的第三代相干(C31)定义为第一特征值与所有特征值之和的比.当采用最主要的3道算法时,也可以用Randen等(C32)、Bakker(C33)、Donias等(C34)、Wu(C35)给出的相干公式进行计算.本文比较了这5种表征方法,模型测试和实际应用结果表明:(1)C31、C34、C35都可以较好地表征相干,当储层较平时C35有不错的抗噪性,对于复杂断块储层,C31即俗称的第三代相干应是首选;(2)储层简单时C32特征值计算结果为负值,储层复杂时其特征值有正值也有负值,物理含义不明确,应用效果也不好;(3)C33计算的是不相干属性,抗噪性一般.在特征值相干的计算过程中,数据道计算窗长度的选取很重要,对于精细勘探而言,拟根据目标体的大小,在1/2波长到3/2波长时窗范围内,选取不同大小时窗,进行分级对比研究.本文的研究成果对于广大解释人员如何用好相干体这一实用技术,有一定的指导意义和借鉴作用. 相似文献
3.
基于频谱分解的碳酸盐岩储层识别 总被引:1,自引:0,他引:1
频谱分解技术是将地震信号从时间域转换到频率域,分析频率对不同尺度地质体的振幅、相位响应特征的一项技术.频谱分解能够得到高于传统分辨率的解释结果,提高刻画储层分布的能力.本文详述了短时傅里叶变换、连续小波变换和S变换的数学原理及适用性:短时傅里叶变换使用固定时窗,不能根据信号的变化调整分辨率,只适合分析分段平稳或近似平稳的信号;连续小波变换使用移动的、尺度可变的小波作为时窗,具有多分辨率特点,但是实际中选择能反映信号特征的小波函数不易;S变换使用频率的倒数来调节时窗,具有多分辨率特征,对数据处理的适应性较强.将这三种方法分别应用于碳酸盐岩储层发育区,利用靠近地震主频的35 Hz分频剖面,分析了不同时窗大小的短时傅里叶变换效果,不同类型小波的连续小波变换效果,并对比了不同频谱分解算法对储层的描述精度.通过分析得出分频剖面比常规地震剖面更有利于储层识别,且S变换效果最好. 相似文献
4.
受窗函数的影响,短时傅里叶变换、小波变换、S变换等传统时频分析方法的分辨率不高.为了提高信号时频变换分辨率,发展了同步挤压小波变换算法;该算法将信号的时频谱值向其中心频率位置挤压,改善了信号时频分析结果,使得信号时频分辨率得到了很大的提升.但由于传统算法时窗固定,处理缺乏灵活性;因此,本文对S变换窗函数进行扩展,提出了同步挤压广义S变换.通过自适应窗函数挤压信号在S域的时频谱值,提高了算法的灵活性和时频分析聚焦能力.运用同步挤压广义S变换对南海某工区实际地震数据进行分频处理,结果显示含油气层能量随着频率的增加而逐渐衰减.因此,使用同步挤压广义S变换对地震数据进行分析处理,不仅可以对储层含油气性进行准确的检测,还可以对地层进行精确的标定. 相似文献
5.
6.
7.
基于小波分析的去噪方法在地震资料叠前处理中得到了广泛应用.本文主要介绍利用小波变换的分频特性来压制相干噪声.通过小波分频技术将叠前地震信号分解为不同频带,然后利用有效波和相干干扰波的频谱差异来区分有效信号和噪声,最后利用加权方法去掉不需要的噪声信息来达到去除相干噪声的目的.实际资料的处理结果表明:基于小波分频方法能很好地压制相干噪声,从而提高地震资料信噪比和分辨率. 相似文献
8.
9.
在有效压制高频随机噪声的基础上,最大限度保留有效信号一直是地震数据降噪处理中的难点.小波变换阈值降噪因其优秀的降噪效果和较高的计算效率受到地球物理学家们的青睐.在小波变换阈值降噪中,小波基、阈值函数以及阈值是影响降噪效果的3个关键因素.针对这3个关键因素开展相关研究:(1)采用更加适合地震信号分解的三参数小波作为母小波,可以更好进行信噪分离;(2)采用改进的阈值函数克服传统硬、软阈值函数的不足,基于改进阈值函数得到的降噪地震数据不仅波形光滑、连续,而且基本保持原始信号的特征,综合了硬阈值和软阈值函数的优点;(3)针对统一阈值“过扼杀”有效信号这一缺点,提出自适应阈值,自适应阈值不单以能量为标准进行有效信号和噪声的识别,还考虑有效信号小波系数的相关性,避免有效信号被当成噪声舍弃.最后通过模型试算和实际地震数据验证所提方法的有效性和实用性. 相似文献
10.
11.
12.
Ya‐juan Xue Jun‐xing Cao Ren‐fei Tian Hao‐kun Du Yao Yao 《Geophysical Prospecting》2016,64(6):1441-1453
How to use cepstrum analysis for reservoir characterization and hydrocarbon detection is an initial question of great interest to exploration seismologists. In this paper, wavelet‐based cepstrum decomposition is proposed as a valid technology for enhancing geophysical responses in specific frequency bands, in the same way as traditional spectrum decomposition methods do. The calculation of wavelet‐based cepstrum decomposition, which decomposes the original seismic volume into a series of common quefrency volumes, employs a sliding window to move over each seismic trace sample by sample. The key factor in wavelet‐based cepstrum decomposition is the selection of the sliding‐window length as it limits the frequency ranges of the common quefrency section. Comparison of the wavelet‐based cepstrum decomposition with traditional spectrum decomposition methods, such as short‐time Fourier transform and wavelet transform, is conducted to demonstrate the effectiveness of the wavelet‐based cepstrum decomposition and the relation between these two technologies. In hydrocarbon detection, seismic amplitude anomalies are detected using wavelet‐based cepstrum decomposition by utilizing the first and second common quefrency sections. This reduces the burden of needing dozens of seismic volumes to represent the response to different mono‐frequency sections in the interpretation of spectrum decomposition in conventional spectrum decomposition methods. The model test and the application of real data acquired from the Sulige gas field in the Ordos Basin, China, confirm the effectiveness of the seismic amplitude anomaly section using wavelet‐based cepstrum decomposition for discerning the strong amplitude anomalies at a particular quefrency buried in the broadband seismic response. Wavelet‐based cepstrum decomposition provides a new method for measuring the instantaneous cepstrum properties of a reservoir and offers a new field of processing and interpretation of seismic reflection data. 相似文献
13.
The wavelet transform techniques were applied to compute time-frequency spectra, coherence and cross-covariance functions between complex-valued polar motion and atmospheric excitation functions. These wavelet transform approaches are based on the classical wavelet transform with Morlet wavelet and the harmonic wavelet transform. The computed coherence and cross-covariance functions enable comparison of polar motion and atmospheric excitation functions data in the chosen frequency band. In the study we concentrate on short period oscillations with periods ranging from several to about 250 days. The time lag functions show frequency dependent time lags corresponding to maxima of the modules of cross-covariance functions between the polar motion and atmospheric excitation functions. 相似文献
14.
本文将小波有限元法引入到流体饱和多孔隙介质二维波动方程的正演模拟中,以二维Daubechies小波的尺度函数代替多项式函数作为插值函数,构造二维张量积小波单元.引入一类特征函数解决了Daubechies小波没有显式解析表达式所带来的基函数积分值计算问题,并推导出计算分数节点上Daubechies小波函数值的递推公式,从而构造出由小波系数空间到波场位移空间的快速小波变换.数值模拟结果表明该方法是有效的. 相似文献
15.
M.T. Carrozzo R. de Franco L. De Luca D. Luzio R. Primiceri T. Quarta M. Vitale 《Geophysical Prospecting》2002,50(6):547-564
A new filtering technique for single‐fold wide‐angle reflection/refraction seismic data is presented. The technique is based on the wavelet decomposition of a set of adjacent traces followed by coherence analysis. The filtering procedure consists of three steps. In the first, a wavelet decomposition of traces into different detail levels is performed. In the second, the coherence attributes for each level are evaluated by calculating cross‐correlation functions of detail portions contained in a space–time moving window. Finally, the filtered traces are obtained as a weighted reconstruction of the trace details. Each weight is obtained from the coherence‐attributes distribution estimated in a proper interval. A sequence of tests is then conducted in order to select possible optimum or unsuitable wavelet bases. The efficiency of the filter proposed was assessed by calculating some properly designed parameters in order to compare it with other standard de‐noising techniques. The proposed method produced a clear signal enhancement in high‐density wide‐angle seismic data, thus proving that it is a useful processing tool for a reliable correlation of seismic phases. 相似文献
16.
采用二进小波变换,构造了位场基小波,通过简单模型,分析了位场信号小波分解与重构的物理实质,阐明了小波变换的频带分布与“归一化”位场空间分布的一致性,以及小波重构的规律,并叙述了小波重构与异常分解的关系. 相似文献
17.
18.
在地震资料频谱分解中,采用匹配地震子波的物理小波,依据地震信号的特征,用振幅、能量衰减率、能量延迟时间及地震子波的中心频率等四类参数构造基本小波,把地震信号分解在小波域,高频分量能够得到精细的刻画.本文以物理小波变换为工具, 给出了该变换中的核函数的选择方法,进而提出了基于物理小波变换的频谱成像方法.我们将此方法用于海上某油田河流相储层的描述,并与常规软件中的小波变换频谱成像结果进行了对比, 结果表明,本文提出的方法更能精细地刻画地质事件. 相似文献
19.
应用小波变换法可对不同频率成分进行分解的特性,选取db4小波基函数,尺度为1~8阶,对海拉尔地震台前兆资料进行分析研究。结果表明,应用小波变换方法可较容易地识别和剔除气压、场地环境干扰等影响海拉尔地震台伸缩仪观测资料精度的诸多因素,气压和场地环境干扰在小波细节分解d 3~d 6部分异常显著;小波变换法对同震效应的识别、提取和去除具有良好效果,远震在小波细节分解d 3~d 5部分异常显著,近震在小波细节分解d 1~d 3、d 6~d 8部分明显;爆破信号在小波分解d 1~d 8部分中均清晰可见,异常的宽度和幅度变化不大。因此,应用小波分解法能有效识别无法判断的干扰源。 相似文献