共查询到17条相似文献，搜索用时 468 毫秒
1.
2.
《地震工程与工程振动》2017,(6)
预制拼装桥墩能够应用于中高地震烈度区的前提是使预制拼装桥墩具有良好的延性和耗能能力。本文采用新型可调节型机械套筒进行轨道交通预制拼装桥墩方案的设计。按照1:3的大比例尺制作了两个试件,第1个试件是以某在建轨道交通桥墩为原型缩尺的整体现浇试件,同时也是基准比照的试件;第2个试件是采用机械套筒连接的预制拼装桥墩试件。采用拟静力试验方法研究了机械套筒预制拼装方法与现浇方法制作的桥墩的抗震性能异同。包括破坏过程,荷载位移滞回曲线,塑性铰区域内的变形特征等。试验结果表明采用该种新型可调节型机械套筒设计的预制拼装桥墩的抗震性能与整体现浇桥墩等同,所以新型可调节型机械套筒方案可作为轨道交通预制拼装桥墩的备选设计方案。 相似文献
3.
利用形状记忆合金（Shape Memory Alloy,简称"SMA"）丝材的超弹性与复位弹簧特性,开发出一种新型变形可恢复SMA阻尼器,以增强其变形可恢复的能力。同时,为了解决SMA丝材在实际工程中锚固难的问题,提出了一种新型可调节夹具,不仅解决了SMA丝材的不易锚固问题,而且增强了调节预应变的能力。对所提出的新型SMA阻尼器进行了循环加载试验研究和数值仿真分析,探讨不同加载频率及位移幅值对其力学性能的影响,建立了恢复力模型。结果表明:新型SMA阻尼器在循环荷载作用下滞回性能稳定,具有良好的耗能性能;内置弹簧对新型SMA阻尼器变形可恢复能力有较大帮助。基于所建立恢复力模型的数值模拟结果与试验结果符合情况很好,验证了阻尼器恢复力力模型的正确性。 相似文献
4.
为探讨自复位桥墩的地震反应,以某简支梁桥为工程背景,设计并制作了一个缩尺的模型桥梁。通过白噪声扫频获得了自复位桥墩的动力特性及其变化规律,选取El-Centro、Mexico和Chi-Chi强震记录作为地震动输入,进行振动台模型试验。试验记录了墩顶的加速度和位移反应,考查了地震动强度、频谱特性及预应力钢筋及其初始预加力对模型桥墩动力特性及摇摆反应的影响。试验结果表明:墩顶水平加速度反应随地震动强度及初始预加力的提高而增大,墩顶位移反应受地震动的强度、频谱特性及初始预加力大小影响较大。墩底提离面轻微损伤会明显降低体系的整体水平刚度,初始预加力则能提高体系整体水平刚度,桥墩的阻尼比随体系的水平刚度增大而减小。强震下自复位桥墩发生了预期的提离摇摆,震后墩底提离面出现轻微损伤,墩身无裂缝产生,结构具有良好的抗震及自复位性能。振动台试验结果验证已有文献的数值分析结论,振动台试验数据可用于数值模型校核或修正。 相似文献
5.
提出了一种用于梁柱节点中的非对称自复位形状记忆合金(shape memory alloy, SMA)连接,可有效提高相应钢框架结构的抗震性能和震后功能恢复能力。设计8个考虑SMA面积、SMA预应变、滑移螺杆预拉力的非对称自复位SMA连接,并进行低周循环加载试验研究,得到相应滞回曲线、骨架曲线、割线刚度、耗能能力和复位性能等。研究结果表明：新型连接具有良好的自复位能力和耗能能力,滞回曲线呈明显的旗帜型,最大自复位率达到87.2%,且整个加载过程无任何构件发生损伤。增大SMA面积、SMA预应变可提高连接的承载力、耗能能力和自复位能力,并减小其残余变形;螺杆预拉力取30 N·m时新型连接的性能最佳。基于Umat子程序编制SMA本构模型并用于ABAQUS软件中,可较准确地模拟其力学性能,为相应连接的有限元参数化分析提供理论基础。 相似文献
6.
高层钢结构地震反应形状记忆合金拉索控制研究 总被引：3，自引：0，他引：3
本文通过形状记忆合金(SMA)材料的超弹性性能试验确定了SMA材料的各项参数和常温状态下的本构模型。对采用SMA拉索实施振动控制的20层钢结构的Benchmark模型的地震响应进行了时程分析。计算结果表明,实施SMA拉索控制后,层间相对位移可降低70％左右,且SMA材料很好的耗能作用有效地减少了地震能量向上部楼层的传递,对上部结构具有一定的隔振作用;顶层相对位移的控制效果达到51％;顶层加速度可降低43％;地震波强度和拉索初应变对拉索的被动控制效果影响较大。最后给出了拉索的安装位置与拉索的应变之间的关系曲线,建议了合理的布置方案。 相似文献
7.
为讨论近断层地震动下摇摆-自复位(Rocking Self-Centering, RSC)桥墩连续梁的地震反应及其抗震优缺点。基于OpenSees有限元分析平台讨论了RSC桥墩三维建模方法,通过对6个试验构件的模拟,比较模拟与试验桥墩滞回曲线、预应力筋最大应力等指标,验证了模型准确性。建立设置RSC桥墩和普通钢筋混凝土(Reinforced Concrete, RC)桥墩的上部结构相同的两座连续梁桥,输入3组含有强速度脉冲的近断层地震波进行非线性动力时程分析,对比其抗震性能。结果表明：在0.4 g近断层地震动下,RSC桥墩与普通RC桥墩相比,RSC桥墩的最大位移角为普通RC桥墩的78.1%～97.6%,墩底曲率延性系数仅为普通RC桥墩的24.0%～34.0%,减小了桥墩的最大变形,也减轻了桥墩地震损伤,不利的一点是使用RSC桥墩会导致支座位移增大。RSC桥墩震后的残余位移较小,且预应力筋处于弹性受力阶段,为实现震后桥梁功能的快速恢复提供了条件。 相似文献
8.
本文提出了一种新型形状记忆合金（Shape Memory Alloy,SMA）-黏弹性阻尼器（ViscoelasticDamper,VED）自复位支撑,设计了普通预应力筋自复位支撑钢框架与SMA-VED自复位支撑钢框架。采用组合模型以及改进材料模型准确模拟了支撑的力学行为,详细讨论了考虑构件失效的模拟方法,通过试验确定了VED的失效应变范围,最后基于概率统计方法进行了易损性分析以及全周期风险分析。研究发现: SMA-VED自复位支撑可显著提升框架抗震性能;倒塌风险以及残余变形超越概率均显著低于普通预应力筋自复位支撑钢框架,下降比例最高超过50%。预应力筋断裂失效导致框架倒塌风险可提高5倍以上; SMA-VED自复位支撑失效会造成残余变形超越概率有所上升但幅度不大。总体来说,SMA-VED自复位支撑钢框架具备更好的地震鲁棒性。 相似文献
9.
《世界地震工程》2017,(3)
为了研究SMA线材与混凝土之间的粘结性能,将SMA绞线和光滑SMA丝分别埋入到混凝土立方体中,制成两类SMA线材拉拔试件。采用轴心拉拔试验对两类拉拔试件的力学性能进行测试,分析了两类试件的破坏模式和受力过程,并考虑了混凝土强度对试件粘结性能的影响。此外,还对两类试件的粘结强度和滑移值进行了对比。结果表明:光滑SMA丝拉拔试件的粘结强度非常低,且混凝土强度对该类拉拔试件的粘结性能几乎没有影响。而SMA绞线拉拔试件的粘结强度要远高于光滑SMA丝拉拔试件的粘结强度;随着混凝土强度的增大,此类试件所能承受的拉拔力和滑移值均增大。因此,光滑SMA丝不适合与混凝土共同工作;在混凝土结构中使用SMA线材时,宜采用SMA绞线。 相似文献
10.
为改善预制装配式桥墩的抗震性能和施工容错能力,提出一种装配式桥墩新型连接方式:超高性能混凝土(Ultra-High-Performance Concrete,UHPC)墩周连接。设计并制作1个现浇桥墩试件和1个UHPC墩周连接装配式桥墩试件,对两个试件进行拟静力试验;建立UHPC墩周连接装配式桥墩试件的三维实体非线性有限元模型,对比研究新型装配式桥墩的抗震性能及其影响因素。结果表明:UHPC墩周连接装配式桥墩与整体现浇桥墩表现出相似的抗侧力性能和自复位能力,二者的抗震性能基本等同。对比分析非线性有限元模型与实际桥墩试件的滞回曲线,二者拟合程度较高,验证了建模方法的可靠性和模拟结果的准确性。UHPC连接段高度对该装配式桥墩抗震性能的影响不大,保证钢筋搭接长度即可。轴压比、立柱高度和搭接钢筋配筋率对该装配式桥墩抗震性能的影响较为明显:在轴压比为0.1~0.3时,试件刚度和水平承载力随轴压比的增大而增大,残余位移随轴压比的增大而减小;立柱高度由2.0 m提高至2.5 m时,高度越大该装配式桥墩的水平承载能力和累积滞回耗能越小;湿接缝处搭接钢筋配筋率由1.01%增至1.57%时,该装配式桥墩的水平承载能力和残余位移相比原配筋试件性能有较明显的提升。 相似文献
11.
Xia Xiushen Wu Suiwen Shi Jun Jia Junfeng Chen Xingchong Ma Huajun 《地震工程与工程振动(英文版)》2020,19(4):1005-1015
In this study, sacrificial components were incorporated into self-centering railway bridge piers to improve the lateral stiffness. The seismic response of this new detail was investigated. First, the method to compute the initial uplift moment of the self-centering pier is given. In addition, shaking table tests were conducted on a free-rocking pier without sacrificial components, which was used to validate a two-spring numerical model. Good agreement was obtained between the numerical results and experimental data. Furthermore, the validated model was employed to investigate the influence of sacrificial components on the seismic response of rocking piers. For this purpose, two models were developed, with and without sacrificial components. Nonlinear response history analysis was then performed on both models under three historical motions. The results showed that compared to the one without sacrificial components, the rocking pier with sacrificial components has comparable displacement at the top of the pier, and maximum uplift moment at high amplitude motion. Therefore, incorporating sacrificial components into the rocking pier can increase the lateral stiffness at service load and low amplitude frequent earthquakes but can produce comparable response at high seismic excitation. These results provide support for performance-based seismic design of self-centering rocking piers.
相似文献12.
沿着摇摆桥墩的概念提出一种限制位移桥墩连续刚构桥体系。该体系通过对连续刚构桥墩底和承台之间采取一定措施,使桥梁在地震发生时能够在限制的位移量内活动,减小输入到桥梁结构中的能量,达到减震的目的。通过对一座铁路连续刚构桥的分析,发现这种限制位移桥墩连续刚构桥体系能大幅减小桥墩的延性和强度地震需求,减震效果明显,在选择合适的限制位移量的情况下,可保证桥墩在高烈度罕遇地震作用下几乎保持弹性工作状态,震后经简单处理即可保证使用功能,为震后救援工作带来极大便利,也大大减少了修复成本。 相似文献
13.
为探讨摇摆-自复位（Rocking Self-Centering,RSC）桥墩的滞回行为并为其数值建模提供依据,基于OpenSees地震分析平台发展此类结构的多弹簧模型并开展系统性讨论。结合RSC桥墩的构造特点发展多弹簧模型的整体建模思路,着重对比三种弹簧分布（基于Gauss积分和Lobatto积分的分布及均匀分布）模式下RSC桥墩的整体力-位移响应,对弹簧所需设置个数进行优化分析,并讨论了弹簧刚度的校准过程。最后,基于现有研究的5个RSC桥墩试件的试验结果,通过对比滞回曲线,发现所建议的模拟方法可较为准确地模拟RSC桥墩在拟静力荷载下的刚度、强度、滞回行为及残余位移。 相似文献
14.
This study explores seismic performance of steel frame buildings with SMA-based self-centering bracing systems using a probabilistic approach. The self-centering bracing system described in this study relies on superelastic response of large-diameter cables. The bracing systems is designed such that the SMA cables are always stressed in tension. A four-story steel frame building characterized until collapse in previous research is selected as a case-study building. The selected steel frame building is designed with SMA bracing systems considering various design parameters for SMA braces. Numerical models of these buildings are developed by taking into account the ultimate state of structural components and SMA braces as well as the effect of gravity frames on lateral load resistance. Nonlinear static analyses are conducted to assess the seismic characteristics of each frame and to examine the effect of SMA brace failure on the seismic load carrying capacity of SMA-braced frames. Incremental dynamic analyses (IDA) are performed to compute seismic response of the designed frames at various seismic intensity levels. The results of IDA are used to develop probabilistic seismic demand models for peak inter-story and residual inter-story drifts. Seismic demand hazard curves of peak and residual inter-story drifts are generated by convolving the ground motion hazard with the probabilistic seismic demand models. Results show that steel frames designed with SMA bracing systems provide considerably lower probability of reaching at a damage state level associated with residual drifts compared to a similarly designed steel moment resisting frame, especially for seismic events with high return periods. This indicates reduced risks for the demolition and collapse due to excessive residual drifts for SMA braced steel frames. 相似文献
15.
This study presents a novel type of shape memory alloy (SMA) cable-restrained high damping rubber (SMA-HDR) bearing, which is particularly suited to near-fault (NF) regions where the pulsing effect potentially exists in the ground motions. The working mechanism of the bearing is first described, followed by an experimental investigation on a full-scale SMA-HDR bearing specimen. The test results confirm the efficient restraining effect offered by the SMA cables, which contribute to 65% and 24.4% of the lateral load resistance and total energy dissipation, respectively, prior to the initial fracture of the SMA cables. The failure of the cables is initiated near the end grip where moderate stress concentration exists at this region. Following the experimental study, the numerical modeling strategy for the bearing is discussed, and a case study is then presented, demonstrating the application of the SMA-HDR bearings in the Datianba #2 highway bridge, a real project that first adopts the proposed bearings in the world. A simplified design process is introduced for the bridge with novel SMA-HDR bearings to mitigate the potential damage during strong earthquakes especially the NF ones. The system-level analysis on the prototype bridge shows that the novel SMA-HDR bearings equipped with ten 7×7×1.2 SMA cables in each bearing could reduce the average maximum bearing displacement (MBD) by nearly 30% compared with the conventional bridge with HDR bearings. The application of the novel SMA-HDR bearing can significantly alleviate the pounding effect, especially under the NF earthquakes. The presence of the SMA cables tends to increase the maximum force response of the piers, but this effect is minor and under control. 相似文献
16.
为了研究温度对铅芯橡胶支座（LRB）隔震桥梁抗震性能的影响,以一座七跨连续梁桥为对象,考虑LRB在夏季和冬季不同温度下的力学特性,利用OpenSees对桥梁抗震性能进行研究。通过对不同温度下墩柱、支座及桥梁系统的地震易损性分析,获得了温度对铅芯橡胶支座隔震桥梁抗震性能的影响。结果表明:（1）与夏季相比,冬季低温降低了桥墩的延性及LRB的剪切变形和耗能能力,使地震作用时墩顶位移和支座变形均小于夏季,降低了LRB的减震效果;（2）冬季低温增大了地震作用时桥墩、LRB及桥梁系统在各个破坏状态的损伤概率,在中等及严重破坏状态时损伤概率相比夏季分别增加了8%和15%。在寒冷地区进行LRB隔震桥梁设计时,应考虑低温导致的LRB隔震效果降低对桥梁抗震性能的影响。 相似文献
17.
The present study explores analytically the concept of rocking isolation in bridges considering for the first time the influence of the abutment-backfill system. The dynamic response of rocking bridges with free-standing piers of same height and same section is examined assuming negligible deformation for the substructure and the superstructure. New relationships for the prediction of the bridge rocking motion are derived, including the equation of motion and the restitution coefficient at each impact at the rocking interfaces. The bridge structure is found to be susceptible to a failure mode related to the failure of the abutment-backfill system, which can occur prior to the well-known overturning of the rocking piers. Thus, a new failure spectrum is proposed called Failure Minimum Acceleration Spectrum (FMAS) which extends the overturning spectrum put forward in previous studies, and it differs in principle from the latter. The comparison with the dynamic response of bridges modelled as rocking frames without abutments reveals not only that seat-type abutments and their backfill have a generally beneficial effect on the seismic performance of rocking pier bridges by suppressing the free rocking motion of the frame system, but also that the simple frame model cannot capture all salient features of the rocking bridge response as it misses potential failure modes, overestimating the rocking bridge's safety when these modes are critical. 相似文献