首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
2013年4月20日发生在龙门山南段的芦山MS7.0地震是继发生在龙门山中北段的汶川MS8.0地震之后的又一次强震。本文通过震后地表变形特征、余震分布、震源机制解、石油地震勘探剖面、历史地震数据等资料,结合前人对龙门山南段主干断裂、褶皱构造特征的研究以及野外实地考察,应用活动褶皱及"褶皱地震"的相关理论,初步分析芦山地震的发震构造模式。认为芦山地震为典型的褶皱地震,发震断裂为前山或山前带一隐伏断裂。构造挤压产生的地壳缩短大部分被褶皱构造吸收。认为龙门山南段前缘地区具有活褶皱-逆断层的运动学特征,表明龙门山逆冲作用正向四川盆地内部扩展。  相似文献   

2.
龙门山断裂带南段应力状态与强震危险性研究   总被引：17，自引：5，他引：12       下载免费PDF全文
龙门山断裂带可分为南段、中段和北段,2008年汶川M8.0级地震发生在该断裂带中-北段. 龙门山断裂带南段是否存在发生强震的危险性倍受关注. 利用1977-2012年四川区域地震台网资料,获得了龙门山断裂带南段的地震活动性参数b值图像以及汶川地震前、后b值的差值Δb图像. 同时,根据宽频带数字地震波形资料,计算了2007年以来南段及附近区域ML≥3.8级地震的视应力. 结果表明,2008年汶川地震后,龙门山断裂带南段天全-芦山、泸定和宝兴北部等区域应力增强,而靠近汶川余震区南端的大邑地区应力水平降低. 天全至宝兴段应力水平相对较高,具有发生中-强地震的条件. 鲜水河断裂带康定以南段应力水平低,短期内发生强震的可能性较小.  相似文献   

3.
龙门山断裂带西南端地壳电性结构   总被引：2，自引：0，他引：2       下载免费PDF全文
在龙门山断裂带中段于2008年5月12日发生了汶川MS 8.0地震,5a之后于2013年4月20日在其西南侧即龙门山断裂带SW段发生了芦山MS 7.0地震。而在汶川地震前,沿龙门山断裂带主体部分存在7a间未发生4.0级以上地震的相对平静期。因此,汶川地震后人们研究了龙门山断裂带的地壳结构及其与汶川地震的成因关系,仅仅相隔5a时间,就在龙门山断裂带的SW段发生了芦山地震,其深部结构和孕震环境以及与汶川地震的关系又成为人们关注的热点科学问题。为了研究龙门山断裂带西南端附近的地壳结构,布置了一条穿越龙门山断裂带西南端附近的大地电磁探测剖面LS6,该剖面位于芦山地震破裂带的西南端。通过采用先进技术对大地电磁数据的分析和二维反演,发现LS6剖面与其东北侧的穿过芦山地震区汶川地震后完成的LMS4剖面的地壳电性结构既有相似性,但也存在明显的差别,其电性结构更复杂。研究表明,尽管2008年发生了汶川地震,但是龙门山断裂带受到的西北侧松潘-甘孜地块向SE的运动和对龙门山断裂带的推挤作用,以及东南侧四川盆地的阻挡作用仍然存在,同时龙门山断裂带西南端及其附近地区的地壳结构更复杂,而且还受到其西南侧川滇地块和鲜水河断裂等变形作用的影响,因此推测芦山地震与汶川地震既是相互独立的2次地震,但也有一定关联。  相似文献   

4.
2013年4月20日在龙门山南段发生M_W6.7强震,造成重大人员伤亡和财产损失.芦山地震发生后,针对发震断层是高角度还是低角度断层?断层的归属、性质和地震构造模型等问题,一直存在不同的认识和争议.本次研究采用了芦山震区的三条高精度二维人工地震反射剖面,结合区域地质、钻井资料,对芦山震区浅层沉积与构造变形进行综合解释;研究同时综合了震源机制解、小震重定位结果以及深地震探测剖面,并结合龙门山地区古生代以来的构造演化史,对震区地质构造进行解析.研究认为龙门山南段主要发育了三套不同层次的滑脱层并控制了上地壳形变,呈现多层滑脱、多期变形、构造叠加的复杂特征.2013年芦山地震的主要活动断层发育在深部约20 km滑脱层之上,倾向NW、倾角较陡大约在45°~50°,并产生反冲断层形成Y字状结构.地震地质解释表明,芦山地震的同震活动断层没有突破中生界和新生界,并非先前认为的双石—大川断裂(F4)或山前大邑隐伏断裂(F6);芦山地震的发震断层为一基底盲冲断层;深地震反射结果进一步揭示芦山地震的发震断层为一早期(古生代)形成的正断层.研究认为芦山地震发震构造符合简单剪切断层转折褶皱模型(Simple-shear Fault-Bend Fold),2013年芦山地震为一次非特征型地震.晚新生代以来在青藏高原向四川盆地强烈挤压持续作用下,早期正断层重新活动并产生了芦山地震.这种深部隐伏断层活化产生的特殊型地震,无疑增加了龙门山地区地震灾害的风险和不确定性.  相似文献   

5.
On 20 April 2013, a destructive earthquake, the Lushan MS7.0 earthquake, occurred in the southern segment of the Longmenshan Fault zone, the eastern margin of the Tibetan plateau in Sichuan, China. This earthquake did not produce surface rupture zone, and its seismogenic structure is not clear. Due to the lack of Quaternary sediment in the southern segment of the Longmenshan fault zone and the fact that fault outcrops are not obvious, there is a shortage of data concerning the tectonic activity of this region. This paper takes the upper reaches of the Qingyijiang River as the research target, which runs through the Yanjing-Wulong Fault, Dachuan-Shuangshi Fault and Lushan Basin, with an attempt to improve the understanding of the tectonic activity of the southern segment of the Longmenshan fault zone and explore the seismogenic structure of Lushan earthquake. In the paper, the important morphological features and tectonic evolution of this area were reviewed. Then, field sites were selected to provide profiles of different parts of the Qingyijiang River terraces, and the longitudinal profile of the terraces of the Qingyijiang River in the south segment of the Longmenshan fault zone was reconstructed based on geological interpretation of high-resolution remote sensing images, continuous differential GPS surveying along the terrace surfaces, geomorphic field evidence, and correlation of the fluvial terraces. The deformed longitudinal profile reveals that the most active tectonics during the late Quaternary in the south segment of the Longmenshan Fault zone are the Yanjing-Wulong Fault and the Longmenshan range front anticline. The vertical thrust rate of the Yanjing-Wulong Fault is nearly 0.6~1.2mm/a in the late Quaternary. The tectonic activity of the Longmenshan range front anticline may be higher than the Yanjing-Wulong Fault. Combined with the relocations of aftershocks and other geophysical data about the Lushan earthquake, we found that the seismogenic structure of the Lushan earthquake is the range front blind thrust and the back thrust fault, and the pop-up structure between the two faults controls the surface deformation of the range front anticline.  相似文献   

6.
基于四川区域地震台网记录的波形资料,利用CAP波形反演方法,同时获取了2013年4月20日芦山M7.0级地震序列中88个M≥3.0级地震的震源机制解、震源矩心深度与矩震级,进而利用应变花（strain rosette）和面应变（areal strain）As值,分析了芦山地震序列震源机制和震源区构造运动与变形特征.获得的主要结果有：（1）芦山M7.0级主震破裂面参数为走向219°/倾角43°/滑动角101°,矩震级为MW6.55,震源矩心深度15 km.芦山地震余震区沿龙门山断裂带走向长约37 km、垂直断裂带走向宽约16 km.主震两侧余震呈不对称分布,主震南西侧余震区长约27 km、北东侧长约10 km.余震分布在7~22 km深度区间,优势分布深度为9~14 km,序列平均深度约13 km,多数余震分布在主震上部.粗略估计的芦山地震震源体体积为37 km×16 km×16 km.（2）面应变As值统计显示,芦山地震序列以逆冲型地震占绝对优势,所占比例超过93%.序列主要受倾向NW、倾角约45°的近NE-SW向逆冲断层控制;部分余震发生在与上述主发震断层近乎垂直的倾向SE的反冲断层上;龙门山断裂带前山断裂可能参与了部分余震活动.P轴近水平且优势方位单一,呈NW-SE向,与龙门山断裂带南段所处区域构造应力场方向一致,反映芦山地震震源区主要受区域构造应力场控制,芦山地震是近NE-SW向断层在近水平的NW-SE向主压应力挤压作用下发生逆冲运动的结果.序列中6次非逆冲型地震均发生在主震震中附近,且主震震中附近P轴仰角变化明显,表明主震对其震中附近局部区域存在明显的应力扰动.（3）序列整体及不同震级段的应变花均呈NW向挤压白瓣形态,显示芦山地震震源区深部构造呈逆冲运动、NW向纯挤压变形.各震级段的应变花方位与形状一致,具有震级自相似性特征,揭示震源区深部构造运动和变形模式与震级无关.（4）不同深度的应变花形态以NW-NWW向挤压白瓣为优势,显示震源区构造无论是总体还是分段均以NW-NWW向挤压变形为特征.但应变花方位与形状随深度仍具有较明显的变化,可能反映了震源区构造变形在深度方向上存在分段差异.（5）芦山地震震源体尺度较小,且主震未发生在龙门山断裂带南段主干断裂上,南段长期积累的应变能未能得到充分释放,南段仍存在发生强震的危险.  相似文献   

7.
Bayan Hara Block is one of the most representative active blocks resulting from the lateral extrusion of Tibet Plateau since the Cenozoic. Its southern and northern boundary faults are characterized by typical strike-slip shear deformation. Its eastern boundary is blocked by the Yangze block and its horizontal movement is transformed into the vertical movement of the Longmen Shan tectonic belt, leading to the uplift of the Longmen Shan Mountains and forming a grand geomorphic barrier on the eastern margin of the Tibet Plateau. A series of large earthquakes occurred along the boundary faults of the Bayan Hara Block in the past twenty years, which have attracted attention of many scholars. At present, the related studies of active tectonics on Bayan Hara Block are mainly concentrated on the boundary faults, such as Yushu-Ganzi-Xianshuihe Fault, East Kunlun Fault and Longmen Shan Fault. However, there are also some large faults inside the block, which not only have late Quaternary activity, but also have tectonic conditions to produce strong earthquake. These faults divide the Bayan Hara Block into some secondary blocks, and may play important roles in the kinematics and dynamics mechanism of the Bayan Hara Block, or even the eastern margin of the Tibet Plateau. The Dari Fault is one of the left-lateral strike-slip faults in the Bayan Hara Block. The Dari Fault starts at the eastern pass of the Kunlun Mountains, extends eastward through the south of Yalazela, Yeniugou and Keshoutan, the fault strike turns to NNE direction at Angcanggou, then turns to NE direction again at Moba town, Qinghai Province, and the fault ends near Nanmuda town, Sichuan Province, with a total length of more than 500km. The fault has been considered to be a late Quaternary active fault and the 1947 M73/4 Dari earthquake was produced by its middle segment. But studies on the late Quaternary activity of the Dari Fault are still weak. The previous research mainly focused on the investigation of the surface rupture and damages of the 1947 M73/4 Dari earthquake. However, there were different opinions about the scale of the M73/4 earthquake surface rupture zone. Dai Hua-guang(1983)thought that the surface rupture of the earthquake was about 150km long, but Qinghai Earthquake Agency(1984)believed that the length of surface rupture zone was only 58km. Based on interpretation of high-resolution images and field investigations, in this paper, we studied the late Quaternary activity of the Dari Fault and the surface rupture zone of the 1947 Dari earthquake. Late Quaternary activity in the central segment of the Dari Fault is particularly significant. A series of linear tectonic landforms, such as fault trough valley, fault scarps, fault springs and gully offsets, etc. are developed along the Dari Fault. And the surface rupture zone of the 1947 Dari earthquake is still relatively well preserved. We conducted a follow-up field investigation for the surface rupture zone of the 1947 Dari earthquake and found that the surface rupture related to the Dari earthquake starts at Longgen village in Moba town, and ends near the northwest of the Yilonggounao in Jianshe town, with a length of about 70km. The surface rupture is primarily characterized by scarps, compressional ridges, pull-apart basins, landslides, cleavage, and the coseismic offset is about 2~4m determined by a series of offset gullies. The surface rupture zone extends to the northwest of Yilonggounao and becomes ambiguous. It is mainly characterized by a series of linear fault springs along the surface rupture zone. Therefore, we suggest that the surface rupture zone of the 1947 Dari earthquake ends at the northwest of Yilonggounao. In summary, the central segment of the Dari Fault can be characterized by strong late Quaternary activity, and the surface rupture zone of the 1947 Dari earthquake is about 70km long.  相似文献   

8.
Anqiu-Juxian Fault is an important fault in the Tanlu fault zone, with the largest seismic risk, the most recent activity date and the most obvious surface traces. It is also the seismogenic fault of the Tancheng M8 1/2 earthquake in 1668. There are many different views about the southern termination location of surface rupture of the Tancheng earthquake and the Holocene activity in Jiangsu segment of this fault. Research on the latest activity time of the Jiangsu segment of Anqiu-Juxian Fault, particularly the termination location of surface rupture of the Tancheng earthquake, is of great significance to the assessment of its earthquake potential and seismic risk. Based on trench excavation on the Jiangsu segment of Anqiu-Juxian Fault, we discuss the time and characteristics of its latest activity. Multiple geological sections from southern Maling Mountain to Chonggang Mountain indicate that there was an ancient seismic event occurring in Holocene on the Jiangsu segment of Anqiu-Juxian Fault. We suggest the time of the latest seismic event is about(4.853±0.012)~(2.92±0.3)ka BP by dating results. The latest activity is characterized by thrust strike-slip faulting, with the maximum displacement of 1m. Combined with the fault rupture characteristics of each section, it is inferred that only one large-scale paleo-earthquake event occurred on the Jiangsu segment of Anqiu-Juxian Fault since the Holocene. The upper parts of the fault are covered by horizontal sand layers, not only on the trench in the west of Chonggang mountain but also on the trench in Hehuan Road in Suqian city, which indicates that the main part of the Jiangsu segment of Anqiu-Juxian Fault was probably not the surface rupture zone of the 1668 Tancheng M8 1/2 earthquake. In short, the Jiangsu segment of Anqiu-Juxian Fault has experienced many paleo-earthquake events since the late Pleistocene, with obvious activity during the Holocene. The seismic activities of the Jiangsu segment of Anqiu-Juxian Fault have the characteristics of large magnitude and low frequency. The Jiangsu segment of Anqiu-Juxian Fault has the deep tectonic and seismic-geological backgrounds of big earthquakes generation and should be highly valued by scientists.  相似文献   

9.
The seismogenic structure of the Lushan earthquake has remained in suspensed until now. Several faults or tectonics, including basal slipping zone, unknown blind thrust fault and piedmont buried fault, etc, are all considered as the possible seismogenic structure. This paper tries to make some new insights into this unsolved problem. Firstly, based on the data collected from the dynamic seismic stations located on the southern segment of the Longmenshan fault deployed by the Institute of Earthquake Science from 2008 to 2009 and the result of the aftershock relocation and the location of the known faults on the surface, we analyze and interpret the deep structures. Secondly, based on the terrace deformation across the main earthquake zone obtained from the dirrerential GPS meaturement of topography along the Qingyijiang River, combining with the geological interpretation of the high resolution remote sensing image and the regional geological data, we analyze the surface tectonic deformation. Furthermore, we combined the data of the deep structure and the surface deformation above to construct tectonic deformation model and research the seismogenic structure of the Lushan earthquake. Preliminarily, we think that the deformation model of the Lushan earthquake is different from that of the northern thrust segment ruptured in the Wenchuan earthquake due to the dip angle of the fault plane. On the southern segment, the main deformation is the compression of the footwall due to the nearly vertical fault plane of the frontal fault, and the new active thrust faults formed in the footwall. While on the northern segment, the main deformation is the thrusting of the hanging wall due to the less steep fault plane of the central fault. An active anticline formed on the hanging wall of the new active thrust fault, and the terrace surface on this anticline have deformed evidently since the Quaterary, and the latest activity of this anticline caused the Lushan earthquake, so the newly formed active thrust fault is probably the seismogenic structure of the Lushan earthquake. Huge displacement or tectonic deformation has been accumulated on the fault segment curved towards southeast from the Daxi country to the Taiping town during a long time, and the release of the strain and the tectonic movement all concentrate on this fault segment. The Lushan earthquake is just one event during the whole process of tectonic evolution, and the newly formed active thrust faults in the footwall may still cause similar earthquake in the future.  相似文献   

10.
4.20芦山地震后,有学者在芦山县龙门乡发现一系列的线性裂缝和砖块的旋转变形等"地震地表破裂迹象",由此推测芦山—龙门一线存在隐伏逆断裂,并认为该断裂有可能是此次地震的发震断裂。因此,进一步探讨芦山—龙门一线是否存在潜在的发震断裂,无论是对研究芦山7.0级地震的发震断裂,还是对灾区的重建指导都十分重要。在龙门乡开展了地质灾害调查、跨谷地的地质剖面实测,槽探和人工地震勘探等工作。结果显示:至少在800m深度范围内,不存在芦山-龙门隐伏断裂。此带上的地裂缝等现象不是由断层位错引起,而更可能是地震动在阶地陡坎附近造成的地基或边坡效应所致。  相似文献   

11.
芦山地震前后龙门山断裂带南段视应力研究   总被引：1，自引：0，他引：1  
利用四川台网数字地震记录资料,计算了2008年汶川地震之后、2013年芦山地震之前5年内,龙门山断裂带南段ML3.0级以上地震视应力随时间的变化,以及芦山M7.0级地震序列的视应力值及其时空分布特征.结果表明：①从芦山地震之前1年的时间开始,龙门山断裂带南段有视应力的上升过程;②芦山地震余震序列视应力存在几次比较突出的视应力与震级相关性的被打破以及视应力的突降异常,且在震后3个小时之后,视应力即有明显下降的过程;③从归准化的芦山地震序列视应力σapp的空间分布来看,视应力高值区域分布在主震的西南方向和整个余震区东南边缘,并且这两个高视应力区正好分布在该断层面与华南地块紧密接触的边缘;④主震西侧有一片视应力相对较高的区域;⑤主震以北区域的视应力则相对较低.  相似文献   

12.
2013年4月20四川省芦山县发生MS7.0级地震,目前的研究资料表明地震发生在龙门山断裂南段,但地表未发现明显破裂.本研究利用InSAR技术与Radarsat-2雷达数据,获取了芦山地震同震的部分形变场,结果表明,近场区域的LOS位移发生视线向隆升,量值在7 cm左右.随后利用弹性半空间的位错模型反演了断层面参数,综合反演结果及震源机制解最终确定了发震断层的初始模型,以形变场观测数据为约束,基于梯度下降法反演获得了断层面上的滑动分布,反演得到的矩震级为Mw6.45级,断层走向213°,倾角39°~43°,最大滑动位于地表以下约13 km深度位置,最大滑动量0.91 m,平均滑动角71°,整体上仍以逆冲滑动为主,兼具左旋走滑.推测在双石-大川断裂以东12 km处展布一条隐伏断裂,为本次的发震断裂.  相似文献   

13.
Nine earthquakes with M≥6 have stricken the northern segment of the Red River fault zone since the historical records, including the 1652 Midu M7 earthquake and the 1925 Dali M7 earthquake. However, there have been no earthquake records of M≥6 on the middle and southern segments of the Red River Fault, since 886 AD. Is the Red River fault zone, as a boundary fault, a fault zone where there will be not big earthquake in the future or a seismogenic structure for large earthquake with long recurrence intervals?This problem puzzles the geologists for a long time. Through indoor careful interpretation of high resolution remote sensing images, and in combination with detailed field geological and geomorphic survey, we found a series of fault troughs along the section of Gasha-Yaojie on the southern segment of the Red River fault zone, the length of the Gasha-Yaojie section is over ten kilometers. At the same time, paleoseismic information and radiocarbon dating result analysis on the multiple trenches show that there exists geological evidence of seismic activity during the Holocene in the southern segment of the Red River fault zone.  相似文献   

14.
世界上最快回应大地震的汶川地震断裂带科学钻探   总被引：5，自引：1，他引：4       下载免费PDF全文
2008年5月12日汶川大地震之后,在青藏高原东缘龙门山地区实施了汶川地震断裂带科学钻探,这是目前世界上最快回应大地震的科学钻探,为地学家探索地震成因机制提供了极好的机遇.汶川地震断裂带科学钻探工程（WFSD）沿产生同震地表破裂的两条断裂带——龙门山的映秀—北川断裂和灌县—安县断裂共实施了6口科学群钻.其目标在于对钻孔的岩心、岩屑和流体样品进行多学科观察、测试和研究,揭示汶川地震断裂带的深部物质组成、结构、产出以及构造属性;探索地震过程中的岩石物理和化学行为、能量状态与破裂演化过程;认识汶川地震发生的应力环境、巨大的地震破裂产生及传播原因、地下流体在地震的孕育、发生、停止过程中的作用,从而检验和深入理解地震断裂发震机理.目前,汶川科钻项目已取得的部分重要成果如下：（1）查明了汶川地震断裂带结构、组成;（2）揭示了汶川地震过程中"热增压"为重要断裂弱化机制,提出断裂带内石墨可作为判断大地震发生的标志;（3）发现目前世界上最低的断层摩擦系数,并首次记录到大震后断裂带快速愈合信息;（4）重建龙门山的构造格架,提出汶川大地震发生的新的成因模式;（5）通过对汶川地震余震的精确定位、钻孔附近的地震台阵观测,确定了地震活动与龙门山断裂带不同区段的空间关系;揭示断裂带深部流体特征与地震活动的关系,为确定大震孕育过程提供深部流体活动行为的科学依据.  相似文献   

15.
As the northeast boundary of the Tibetan plateau, the Haiyuan-Liupan Shan fault zone has separated the intensely tectonic deformed Tibetan plateau from the stable blocks of Ordos and Alxa since Cenozoic era. It is an active fault with high seismic risk in the west of mainland China. Using geology and geodetic techniques, previous studies have obtained the long-term slip rate across the Haiyuan-Liupan Shan fault zone. However, the detailed locking result and slip rate deficit across this fault zone are scarce. After the 2008 Wenchuan MS8.0 earthquake, the tectonic stress field of Longmen Shan Fault and its vicinity was changed, which suggests that the crustal movement and potential seismic risk of Haiyuan-Liupan Shan fault zone should be investigated necessarily. Utilizing GPS horizontal velocities observed before and after Wenchuan earthquake(1999~2007 and 2009~2014), the spatial and temporal distributions of locking and slip rate deficit across the Haiyuan-Liupan Shan fault zone are inferred. In our model, we assume that the crustal deformation is caused by block rotation, horizontal strain rate within block and locking on block-bounding faults. The inversion results suggest that the Haiyuan fault zone has a left-lateral strike-slip rate deficit, the northern section of Liupan Shan has a thrust dip-slip rate deficit, while the southern section has a normal dip-slip rate deficit. The locking depths of Maomao Shan and west section of Laohu Shan are 25km during two periods, and the maximum left-lateral slip rate deficit is 6mm/a. The locking depths of east section of Laohu Shan and Haiyuan segment are shallow, and creep slip dominates them presently, which indicates that these sections are in the postseismic relaxation process of the 1920 Haiyuan earthquake. The Liupan Shan Fault has a locking depth of 35km with a maximum dip-slip rate deficit of 2mm/a. After the Wenchuan earthquake, the high slip rate deficit across Liupan Shan Fault migrated from its middle to northern section, and the range decreased, while its southern section had a normal-slip rate deficit. Our results show that the Maomao Shan Fault and west section of Laohu Shan Fault could accumulate strain rapidly and these sections are within the Tianzhu seismic gap. Although the Liupan Shan Fault accumulates strain slowly, a long time has been passed since last large earthquake, and it has accumulated high strain energy possibly. Therefore, the potential seismic risks of these segments are significantly high compared to other segments along the Haiyuan-Liupan Shan fault zone.  相似文献   

16.
2008年5.12汶川大地震发生在中国大陆南北地震带中段.由于龙门山断裂带历史上只发生过3次6～61/2级强震,而且其晚第四纪构造活动速率很低,以至于对其潜在地震危险性认识不足.为什么在龙门山地区突发大地震,该地震具有哪些特征？其成因机制是什么？本文在地震地质科学考察的基础上,利用震前的GPS观测结果,试图对上述问题进行一些初步的思考和探讨.结果表明,5.12汶川大地震是龙门山断裂带的映秀—北川断裂突发错动的结果,地表上形成200多公里长的地表破裂带;灌县—江油断裂在地震中也发生了破裂,形成的地表破裂带长达60多公里.震前的GPS观测表明,横跨整个龙门山断裂带的滑动速率不超过～2 mm/yr,单条断裂的活动速率不超过～1 mm/yr,与地震地质研究结果和历史地震记录相一致.利用地震地质考察和地震波反演得到的最大同震位移可以获得相当于5.12汶川大地震的强震复发周期为2000～6000年.龙门山断裂带发育在破裂强度很大的变质杂岩体中,断裂带本身在剖面上呈“犁形”或“铲形”结构,有利于能量积累,形成破坏性巨大的地震.所以,5.12汶川大地震是一次低滑动速率、长复发周期和高破坏强度的巨大地震,是一种值得高度重视和深入研究的新的地震类型.  相似文献   

17.
2013年4月20日四川芦山M7.0级地震介绍   总被引：20，自引：6，他引：14       下载免费PDF全文
2013年4月20日四川芦山M7.0级地震发生在龙门山断裂带南段,震源机制解为逆冲型.震后3天震区已发生3000多次余震,其中M5级余震4次,最大余震是4月21日17时05分芦山、邛崃交界M5.4级地震,余震区长轴约45 km,短轴约20 km.芦山M7.0级地震与2008年5月12日汶川M8.0级地震均位于龙门山断裂带,但汶川地震发生在该断裂带中-北段,两个地震的余震区存在约45 km的间隔,芦山M7.0级地震不是汶川地震的余震,但两者密切相关.  相似文献   

18.
龙门山断裂带北段深部结构与反射地震特征   总被引：2，自引：1，他引：1       下载免费PDF全文
2008年5月12日汶川MW7.9特大地震发生在龙门山断裂带,龙门山断裂带深部结构的复杂性制约了地震的破裂过程.通过对研究区区域地质、汶川地震前后采集的地震反射剖面等研究,在对龙门山北段汶川地震断裂带的深部结构和反射地震特征进行了分析的基础上,探讨了它对地表破裂过程的制约.研究结果表明,在地震剖面上,断裂带表现为能量破碎、联系性差;频率剖面上显示整体剖面频率在5~45 Hz,断裂带呈现频率低（15~26 Hz）等特征.龙门山北段映秀-北川断裂在10 km以上是一条倾向北西的高角度走滑兼逆冲性质的断裂,倾角50°~70°.它分割了西侧的轿子顶杂岩和东侧的唐王寨推覆体,错断了早期形成的逆冲岩片,从南到北总位移量由大变小.它高角度的几何形态约束了断裂以走滑为主兼逆冲分量的运动性质,降低了地表滑移量,影响了地震破裂过程以及余震沿断裂带两侧分布的特性.  相似文献   

19.
芦山地震发生在龙门山断裂带前缘.关于芦山地震的发震断层,有的认为是前山断裂——双石—大川断裂,有的认为是山前断裂——大邑断裂拟或其他隐伏断裂,发震断裂究竟是哪条断裂以及芦山地震是不是汶川地震的余震?目前仍存在较大争议.震后穿过芦山地震区完成了一条长近40km的深地震反射剖面,以确定芦山地震的发震构造.反射剖面显示浅部褶皱和断裂构造发育,在上地壳存在6条逆冲断裂,下地壳存在一条非常明显的变形转换带,在深度16km左右还存在一个滑脱层,浅部的6条断裂最终都归并到该滑脱层上.参考主余震精定位结果,芦山地震的发震断裂应该是位于双石—大川断裂和大邑断裂之间的隐伏断裂F4,F2和F3断裂受控于发震断裂而活动,形成剖面上"Y"字型余震分布现象.隐伏断裂F4属山前断裂,不是前山断裂,因此芦山地震不是汶川地震的余震.  相似文献   

20.
In order to reveal the deformation and cumulative stress state in Longmenshan and its adjacent faults before Wenchuan earthquake,a 3D viscoelastic finite element model,which includes Longmenshan,Longriba,Minjiang and Huya faults is built in this paper.Using the GPS measurement results of 1999-2004 as the boundary constraints,the deformation and movement of Longmenshan fault zone and its adjacent zones before Wenchuan earthquake are simulated.The conclusions are drawn in this paper as follows:First,velocity component parallel to Longmenshan Fault is mainly absorbed by Longriba Fault and velocity component perpendicular to the Longmenshan Fault is mainly absorbed by itself.Because of the barrier effect of Minjiang and Huya faults on the north section of Longmenshan Fault,the compression rate in the northern part of Longmenshan Fault is lower than that in the southern part.Second,extending from SW to NE direction along Longmenshan Fault,the angle between the main compressive stress and the direction of the fault changes gradually from the nearly vertical to 45 degrees. Compressive stress and shear stress accumulation rate is high in southwest segment of Longmenshan Fault and compressive stress is greater;the stress accumulation rate is low and the compressive stress is close to shear stress in the northeast segment of the fault.This is coincident with the fact that small and medium-sized earthquakes occurred frequently and seismic activity is strong in the southwest of the fault,and that there are only occasional small earthquakes and the seismic activity is weak in the northeast of the fault.It is also coincident with the rupture type of thrust and right-lateral strike-slip of the Wenchuan earthquake and thrust of the Lushan earthquake.Third,assuming that the same type and magnitude of earthquake requires the same amount of stress accumulation,the rupture of Minjiang Fault,the southern segment of Longmenshan Fault and the Huya Fault are mainly of thrust movement and the earthquake recurrence period of the three faults increases gradually.In the northern segment of Longriba Fault and Longmenshan Fault,earthquake rupture is of thrusting and right-lateral strike-slip. The earthquake recurrence period of former is shorter than the latter.In the southern segment of Longriba Fault,earthquake rupture is purely of right-lateral strike-slip,it is possible that the earthquake recurrence period on the fault is the shortest in the study region.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号