共查询到20条相似文献，搜索用时 250 毫秒
1.
基于活动块体的基本概念,综合对研究区内活动断裂带空间展布、地震活动性等资料的分析将巴颜喀拉块体东部及邻区划分为巴颜喀拉块体（I）、华南块体（Ⅱ）、川滇块体（Ⅲ）和西秦岭块体（IV）等4个一级块体.利用GPS形变场、地球物理场等资料结合F检验法,将巴颜喀拉块体划分为阿坝（I1）、马尔康（I2）和龙门山（I3）3个次级块体,将西秦岭块体划分为岷县（IV1）和礼县（IV2） 2个次级块体.利用分布在各个块体内部的GPS测站,计算各活动块体及块体边界断裂带的运动变形特征.结果表明：各活动块体的整体运动包括平移和旋转运动;东昆仑断裂带、甘孜—玉树断裂带和鲜水河断裂带的滑动速率明显高于龙门山断裂带的滑动速率;巴颜喀拉块体东部走向北西或北西西的边界断裂表现出左旋拉张的特性;走向北东的边界断裂带,除成县—太白断裂带外,均表现出右旋走滑兼挤压的活动特征.巴颜喀拉块体的东向运动存在自西向东的速度衰减,衰减主要被龙日坝断裂带和岷江断裂带分解吸收,其中龙日坝断裂带的水平右旋分解非常明显,约为~4.8±1.6 mm/a,岷江断裂带的水平分解较弱.龙门山断裂带被马尔康、龙门山和岷县等次级块体分成南、中、北三段,龙门山断裂带中段上的主压应变率要明显小于龙门山断裂带南段上的应变率,其北西侧变形幅度从远离断裂带较大到靠近断裂带逐渐减小,表明其在震前已经积累了较高的应变能,有利于发生破裂滑动.汶川地震后,地表破裂带和余震分布揭示的断裂带运动性质自南西向北东由以逆冲运动为主,逐渐转为逆冲兼走滑的特征可能与龙门山断裂带中段所受主压应力方向自南西向北东的变化有关.马尔康、龙门山和岷县3个次级块体与华南块体之间较低的相对运动速度以及龙门山断裂带低应变率、强闭锁的特征都决定了汶川地震前龙门山断裂带低滑动速率的运动特征. 相似文献
2.
利用区域GPS和水准测量资料,结合地震构造背景的分析,本文研究2008年汶川8.0级地震前横跨龙门山断裂带地区的震间地壳形变,探讨引起这种形变的活动构造与动力学模式,并由此认识汶川地震的孕育与成因机制.主要结果表明：1997～2007年期间,自龙门山断裂带中段朝北西约230 km的地带内存在垂直于断裂的水平缩短变形、以及平行于断裂的水平右旋剪切变形,缩短率为1.3×10-8/a （即：0.013 mm/km/a）,角变形速率为2.6×10-8/a;同一地带在1975～1997年期间还表现出垂直上隆变形,上隆速率在龙门山前山断裂与中央断裂之间仅0.6 mm/a,而至龙门山后山断裂及其以西达2～3 mm/a.这些反映了在汶川地震之前至少10～30余年,龙门山断裂带中段的前山与中央断裂业已闭锁、并伴有应变积累.造成这种形变的主要原因是：以壳内的低速层为“解耦”带,巴颜喀拉地块上地壳朝南东的水平运动在四川盆地西缘受到华南地块的阻挡、转换成龙门山断裂带中段的逆冲运动;由于该断裂段的震间闭锁,致使西侧的巴颜喀拉地块的上地壳发生横向缩短以及平行断裂的右旋剪切变形.然而,龙门山断裂带北段在1997～2007年期间除了有大约0.9 mm/a的右旋剪切变形外,横向的缩短变形极微弱,这可能与该断裂段西侧的岷江、虎牙、龙日坝等断裂带吸收了巴颜喀拉地块朝东水平运动的大部分有关.另外,汶川地震前,横跨龙门山断裂带中段与北段的地壳形变特征的差异,与汶川地震时能量释放的空间分布吻合. 相似文献
3.
The Late Pleistocene activity of the eastern part of east Kunlun fault zone and its tectonic significance 总被引：3，自引：0，他引：3
JunLong Zhang JinWei Ren ChangYun Chen JunDong Fu PanXin Yang RenWei Xiong ChaoZhong Hu 《中国科学:地球科学(英文版)》2014,57(3):439-453
The nearly EW-trending East Kunlun fault zone is the north boundary of the Bayan Har block.The activity characteristics and the position of the eastern end of its eastward extension are of great significance to probing into the dynamic mechanism of formation of the east edge of the Tibetan Plateau,and also lay the foundation for seismic risk assessment of the fault zone.The following results are obtained by analysis based on satellite image interpretation of landforms,surface rupture survey,terrace scarp deformation survey,and terrace dating data on the eastern part of the East Kunlun fault zone:(1)the Luocha segment is a Holocene active fault,where a reverse L-shape paleoearthquake surface rupture zone of about 50 km long is located;(2)the Luocha segment is characterized by left-lateral slip movement under the compression-shear condition since the later period of the Late Pleistocene,with a rate of 7.68–9.37 mm/a and a vertical slip rate of 0.7–0.9 mm/a,which are basically in accord with the activity rate of segments on its west side.The results indicate that it is a part of eastward extension of the East Kunlun fault zone;(3)the high-speed linear horizontal slip of the nearly EW-trending East Kunlun fault zone is blocked by the South China block at east,and transforms into the vertical movement of the nearly SN-NNE trending Minjiang fault zone and the Longmenshan fault zone,and the uplift of Longmenshan and Minjiang.The area where transform of the two tectonic systems occurred confines the position of the east end;(4)Luocha segment and Maqu segment constitute the"Maqu seismic gap",so,seismic risk at Maqu segment is higher than that at Luocha segment,which should attract more attention. 相似文献
4.
为了揭示巴颜喀拉地块东缘及邻区的壳幔速度结构差异，获取2017年九寨沟MS7.0地震的深部构造背景，本文收集了2009年5月至2016年8月期间四川及邻区数字测震台网的203个地震台站所记录到的远震P波走时数据，应用有限频体波走时层析成像方法，反演得到了巴颜喀拉地块东缘及邻区50—600 km深度范围内的三维壳幔P波速度结构。反演结果表明:巴颜喀拉地块东缘及邻区的壳幔速度结构具有明显的横向不均匀性和分区特征，松潘—甘孜地槽褶皱系、西秦岭和祁连山褶皱系的整体速度异常较低，研究区东部具有克拉通性质的四川盆地西北缘和鄂尔多斯地块南缘则呈明显的高速异常。上地幔P波速度结构特征差异表明松潘—甘孜地块的抬升可能与地幔上涌有关，巴颜喀拉地块东缘九寨沟震区及周边50—250 km深度范围内的上地幔存在低速异常，在400—600 km地幔过渡带深度范围内表现为明显的高速异常特征。巴颜喀拉地块向东南方向运移受到东部高速、高强度的扬子克拉通地块对青藏高原物质东向挤出的强烈阻挡，而九寨沟震区处于松潘—甘孜地块重要的北东边界断裂交会处附近，应力容易在此集中，这些因素均可能是东昆仑断裂塔藏段与岷江断裂北段交会处附近发生九寨沟MS7.0地震的深部动力学背景。 相似文献
5.
青藏高原东缘龙门山构造带是研究青藏高原地壳物质向东侧向挤出的焦点地区.为探索龙门山构造带活动构造特征及其与发震构造的关系，本文通过布置垂直龙门山构造带南段芦山地震震源区的大地电磁测深剖面，运用多种数据处理手段，得到研究区可靠的电性结构，并通过与已有龙门山中段和北段剖面进行对比分析.研究表明：（1）青藏高原东缘岩石圈存在明显的低阻异常带--松潘岩石圈低阻带，该低阻异常带沿龙日坝断裂-岷山断裂-龙门山后山断裂分布，形成松潘-甘孜地块向扬子地块俯冲的深部动力学模式，通过统计研究区的历史强震，发现震源主要沿低阻异常带东侧分布，同时，低阻异常带也是低速度、低密度异常带，松潘岩石圈低阻带可能是扬子地块的西缘边界；（2）青藏高原物质东移过程中，受到克拉通型四川盆地的强烈阻挡，龙门山构造带表层岩块和物质发生仰冲推覆，表现为逆冲推覆特征的薄皮构造，中下地壳和上地幔顶部物质向龙门山构造带岩石圈深部俯冲，印支运动晚期，扬子古板块持续向华北板块俯冲，在上述构造运动作用下，呈现出刚性的上扬子地块西缘高阻楔形体向西插入柔性青藏块体的楔状构造；（3）根据电性结构推断，芦山地震受到深部上里隐伏壳幔韧性剪切带向上扩展的影响，构成芦山地震的深部主要动力来源；汶川地震的发生，在龙门山南段形成应力加载区，是触发或加快芦山地震孕育发生的另一个动力来源. 相似文献
6.
QI Yu-ping ZHANG Zhi-wei LONG Feng XIAO Ben-fu LIANG Ming-jian LU Qian JIANG Peng 《地震地质》2018,40(2):377-395
The Daliangshan sub-block is a boundary region among the Bayan Har block, the Sichuan-Yunnan block and the South China block. It hosts four major fault systems:The southwest to south trending Xianshuihe-Zemuhe Fault zone in the west, the Longmenshan fault zone is the northern boundary, the Zhaotong-Lianfeng fault zone in the south, and the NS-trending Mabian-Yanjin fault zone in the east. This study focused on focal mechanisms and the regional stress field of the Daliangshan sub-block to help understand the earthquake preparation process, tectonic deformation and seismic stress interaction in this area. We collected broadband waveform records from the Sichuan Seismic Network and used multiple 1-D velocity models to determine the focal mechanisms of moderate and large earthquakes(ML ≥ 3.5)in the Daliangshan sub-block by using the CAP method. Results for 276 earthquakes from Jan 2010 to Aug 2016 show that the earthquakes are dominated by strike-slip and trust faulting, very few events have normal faulting and the mixed type. We then derived the regional distribution of the stress field through a damp linear inversion(DRSSI)using the focal mechanisms obtained in this study. Inversion results for the spatial pattern of the stress field in the block suggest that the entire region is predominantly under strike-slip and trust faulting regimes, largely consistent with the focal mechanisms. The direction of maximum compression axes is NW-NWW, and part of the area is slightly rotated, which is consistent with the GPS velocity field. Combining geodynamic background, this work suggests that because the Sichuan-Yunnan block is moving to SE and the Tibetan plateau to SE-E along major strike-slip faults, the stress field of the Daliangshan sub-block and its adjacent regions is controlled jointly by the Bayan Har block, the Sichuan-Yunnan block and the South China block. 相似文献
7.
THRUST OF THE SOUTHERN LONGMENSHAN FAULT IN THE LATE QUATERNARY REVEALED BY RIVER LANDFORMS 
下载免费PDF全文
下载免费PDF全文 The Longmenshan fault zone is divided into three sections from south to north in the geometric structure. The middle and northern segments are mainly composed of three thrust faults, where the deformation of foreland is weak. The geometric structure of the southern segment is more complex, which is composed of six fault branches, where the foreland tectonic deformation is very strong. The Wenchuan MS8.0 earthquake occurred in the middle of the Longmenshan in 2008, activating the bifurcation of two branches, the Yingxiu-Beichuan and the Guixian-Jiangyou faults. In 2013, the Lushan MS7.0 earthquake occurred in the southern Longmenshan, whose seismogenic structure was considered to be a blind fault. After the Lushan earthquake, the seismic hazard in the southern Longmenshan has been widely concerned.
At present, the studies on active tectonics in the southern Longmenshan are limited to the Dachuan-Shuangshi and the Yanjing-Wulong faults. The Qingyi River, which flows across the southern Longmenshan, facilitates to study fault slip by the deformation of river terraces. Based on satellite imagery and high-resolution DEM analysis, we measured the fluvial terraces along the Qingyi river in detail. During the measurement, the Sichuan network GPS system (SCGNSS)was employed to achieve a precision of centimeter grade. Besides, the optical luminescence dating (OSL)method was employed to date the terraces' ages. And the late Quaternary activities of the six branch faults in the southern Longmen Shan were further analyzed.
The Gengda-Longdong, Yanjing-Wulong and the Xiao Guanzi faults (west branch of the Dachuan-Shuangshi fault)all show thrust slip and displaced the terrace T2. Their average vertical slip rates in the late Quaternary are 0.21-0.30mm/a, 0.12-0.21mm/a and 0.10-0.12mm/a, respectively. Since the Late Quaternary, vertical slip of the east branch of the Dachuan-Shuangshi fault was not obvious, and the arc-like Jintang tectonic belt was not active. Crustal shortening rate of the southern Longmenshan thrust fault zone in the late Quaternary is 0.48-0.77mm/a, which equals about half of the middle segment of the Longmenshan. Based on the previous study on the tectonic deformation of the foreland, we consider that the foreland fold belt in the southern Longmenshan area has absorbed more than half of the crustal shortening. The three major branch faults in the southern Longmenshan are active in the late Quaternary, which have risk of major earthquakes. 相似文献
8.
On 12 May 2008, the devastating Wenchuan earthquake struck the Longmenshan fault zone, which comprised the eastern margin of the Tibetan Plateau, and this fault zone was predominantly a convergent boundary with a right-lateral strike-slip component. After such a large-magnitude earthquake, it was crucial to analyze the influences of the earthquake on the surrounding faults and the potential seismic activity. In this paper, a complex viscoelastic model of western Sichuan and eastern Tibet regions was constructed including the topography. Based on the findings of co-seismic static slip distribution, we calculated the stress change caused by the Wenchuan earthquake with the post-seismic relaxation into consideration. Our preliminary results indicated that: (1) The tectonic stressing rate was relatively high in Kunlun mountain pass-Jiangcuo, Ganzi-Yushu, Xianshuihe and Zemuhe faults; while in the east Kunlun and Longriba was medium; also the value was less in the Minjiang, Longmenshan, Anninghe and Huya faults. As to the Longmenshan fault, the value was 0.28×10-3 MPa/a to 0.35×10-3 MPa/a, which is coincident with the previous long recurrence interval of Wenchuan earthquake; (2) The Wenchuan earthquake not only caused the Coulomb stress decrease in the source region, but also the stress increase in the two terminals, especially the northeastern segment, which is comparatively consistent with the aftershock distribution. Meanwhile, the high concentration areas of the static slip distribution were corresponding to the Coulomb stress reductions; (3) The Coulomb stress change caused by Wenchuan earthquake showed significant increase on five major faults, which were northwestern segment of Xianshuihe fault, eastern Kunlun fault, Longriba fault, Minjiang fault and Huya fault respectively; also the Coulomb stress on the fault plane of the Yushu earthquake was faintly increased; (4) We defined the recurrence interval as the time needed to accumulate the magnitude of the stress drop, and the recurrence interval of Wenchuan earthquake was estimated about 1 714 a to 2 143 a correspondingly. 相似文献
9.
甘加盆地位于西秦岭北缘断裂带西端,盆地西缘发育了三条近南北向的断层（东支、中支、西支）,表现为西高东低的弧形地貌阶梯带。基于高分辨率卫星遥感影像解译、地质地貌调查、UAV航拍测量、剖面清理与14C测年等工作,对甘加盆地西缘断裂带进行综合研究,发现该断裂带第四纪晚期有新活动。断层新活动在地貌上表现为不同级别的断层陡坎、阶地与洪积台地断错以及冲沟与阶地右旋等特征。断层剖面与擦痕揭示,该断裂带具右旋逆冲性质,断层断错最新地层为全新统。根据测量与测年数据,初步估算甘加盆地西缘断裂带西支全新世中期以来的平均水平右旋滑动速率为0.89 mm/a,平均垂直滑动速率为0.30 mm/a。 相似文献
10.
INTRODUCTIONWestern Sichuan and its vicinity are in the juncture of three big blocks,the Chuandian,theBayan Har andthe South China blocks,whicharelocated onthe eastern margin of the Qinghai-Xizang(Tibet)Plateau(Fig.1).Three groups of active block boundaryfault zones that generate destructiveearthquake occurrence,whichtrend NW-,NE-and nearly SNrespectively,have been developedthere(Zhang Peizhen,et al.,2003).Western Sichuan and its vicinity have such basic tectoniccharacteristics tha… 相似文献
11.
九寨沟地震(M_s7.0或M_w6.5)震中位于青藏高原巴颜喀拉块体东缘东昆仑断裂带东端塔藏断裂、岷江断裂和虎牙断裂交汇部位,中国地震局相关科研机构的研究人员曾将该震中区判定为玛沁—玛曲高震级地震危险区.地震应急科学考察期间没有发现地震地表破裂带,但地震烈度等震线长轴方位、极震区基岩崩塌和滑坡集中带、重新定位余震空间展布和震源机制解等显示出发震断层为NNW向虎牙断裂北段,左旋走滑性质,属东昆仑断裂带东端分支断层之一.此外,汶川地震后,在青藏高原东缘和东南缘次级活动断层上发生了包括2017年九寨沟地震(Mw6.5)、2014年鲁甸(M_w6.2)、景谷(M_w6.2)、康定(M_w6.0)等多次中强地震,显示出青藏高原东缘至东南缘各块体主干边界活动断层现今处于中等偏高的应变积累状态,即在巴颜喀拉、川滇等块体主干边界活动断层上具备了发生高震级(M_w≥7.0)地震的构造应力-应变条件,未来发生高震级地震的危险性不容忽视. 相似文献
12.
在印度洋板块与欧亚板块的碰撞-挤压作用下,不仅形成了喜马拉雅弧形山造山带,而且导致其东部弧顶—东构造结似一尖楔沿NNE方向插入青藏高原的东北缘.造成了巴颜喀拉块体和龙门山断裂系深、浅部构造强烈活动和变形,并导致高原腹地壳、幔物质以大型走滑断裂为通道边界向E-ES方向运移.2008年5月12日汶川—映秀MS8.0地震就发生在这相对活动的巴颜喀拉块体与相对稳定的四川盆地之间的龙门山断裂系辖区内.基于该区深部壳、幔结构和主震（MS8.0）与7万多次余震震中位置与震源深度的展布研究表明,汶川—映秀MS8.0地震的发震断裂不是震中在地表投影位置附近,而是龙门山断裂系3条以不同角度西倾、且向下在15±5 km深处汇聚的断裂带CF.该发震断裂带不是一条简单的线性断裂带,而是一半径为5 km左右的柱状震源体,沿NE向展布.在青藏高原东北缘深部物质向东与向东南运动过程中地壳各层整体逐渐抬升,且在龙门山断裂系地带为减薄的转折部位,而地壳低速层却在这里尖灭.在两陆-陆板块碰撞力系作用下,壳、幔介质以上地壳底部低速层（深20±5 km）为上滑移面,并与上地壳解耦,而在深处则以岩石圈底部漂曳的软流层顶部（深100±10 km）为下滑移,故下地壳和上地幔盖层物质才能同步运动.它们在四川盆地高速“刚性”壳、幔物质阻隔下,龙门山断裂系的3条向下汇聚的断裂带与下地壳和上地幔盖层物质同步沿龙门山断裂系的断层面向上逆冲,当向上与向下同步运动的固态壳、幔介质二者在15±5 km深处强烈碰撞时激发了这次MS8.0地震和一系列强余震的发生和发展.基于上述可见,对强烈地震孕育,发生和发展的深部介质与构造环境,深部物质与能量的交换、运移和深层动力过程的研究乃核心所在. 相似文献
13.
青藏高原东缘的地壳结构是两种主流青藏高原隆升模式争辩的焦点之一.中下地壳流曾经被认为是高原东缘隆升的主要构造驱动力,但是中上地壳之间低阻低速层的发现及其与2008 MS8.0汶川地震良好的对应关系表明,高原东缘具有向东刚性挤出的可能性.然而大部分关于龙门山断裂的数值模拟仍建立在下地壳流的基础上,仅将低阻低速层作为断裂的延续或是弱化地壳物性参数的软弱层,而非能够控制块体滑动的"解耦层",也没有考虑到刚性块体变形中的断裂相互作用.本文建立了包含相互平行的龙门山断裂与龙日坝断裂的刚性上地壳模型,用极薄的低阻低速层作为块体滑动的解耦带,采用速率相关的非线性摩擦接触有限元方法,基于R最小策略控制时间步长,计算了在仅有侧向挤压力作用下,低阻低速层对青藏高原东缘的刚性块体变形和断裂活动的作用.计算结果显示,低阻低速层控制了刚性块体的垂直变形和水平变形分布特征.在侧向挤压力的持续作用下,在低阻低速层控制下的巴颜喀拉块体能够快速隆升,而缺乏低阻低速层的四川盆地隆升速度和隆升量均极小,隆升差异集中在龙门山断裂附近,使其发生应力积累乃至破裂.龙日坝断裂被两侧的刚性次级块体挟持着一起向南东方向运动,但该断裂的走滑运动分解了绝大部分施加在块体边界上的走滑量,使得相邻的龙门山次级块体的走滑分量遽然减少,也使得龙门山断裂表现出以逆冲为主,兼有少量走滑的运动性质.本文所得的这些计算结果显示了在缺乏中下地壳流,仅在低阻低速层解耦下刚性块体隆升过程及相关断裂活动,提供了青藏高原东缘刚性块体挤出的可行性,为青藏高原东缘隆升机制的研究讨论提供了重要依据. 相似文献
14.
以巴颜喀拉块体为研究对象，考虑区域地质构造差异，主要活动断裂带，活动块体和边界断裂带的划分结果，引入深部三维速度结构，建立能反映地表起伏和岩石圈分层结构的青藏高原地区三维黏弹性有限元模型.以地壳水平运动速率观测值和最大主压应力方向测量值为约束条件重建研究区现今构造背景应力场.在此基础上模拟了自1900年以来巴颜喀拉块体周缘的7级以上强震序列，从库仑破裂应力角度研究了应力演化与强震的关系、强震之间的相互作用关系以及长期构造加载对强震的影响.研究结果表明，巴颜喀拉块体周缘强震的发生可能与震源区总应力的增加有关.2008年汶川地震导致龙门山断裂带南段应力增加，表明汶川地震对2013年芦山地震有促进作用.鲜水河断裂带上的7级以上强震序列对发生在邻近龙门山断裂带上的2008年汶川地震和2013年芦山地震有延迟作用. 相似文献
15.
热水 -日月山断裂带是发育在青藏高原东北缘柴达木 -祁连活动地块内部的 1条重要的NNW向逆 -右旋走滑活动断裂带 ,长约 183km。断裂由 4条不连续的次级断裂段右阶羽列而成 ,阶距 2～ 3km左右 ,在不连续部位形成拉分区。主断裂两端则形成帚状分叉。断裂活动形成了一系列山脊、冲沟和阶地等右旋断错微地貌 ,其中Ⅰ级阶地右旋断错约 8～ 11m ,Ⅱ级阶地右旋断错约 35m。同时沿断裂带还形成了许多断层陡坎 ,Ⅰ级阶地或洪积台地上断层陡坎高约 0 .5～ 1m ,最高达 2 .8m ,Ⅱ级阶地或台地上的断层陡坎高约 2 .5～ 3m ,最高达 4～ 5m。根据相应的阶地年代 ,计算得到断裂带全新世以来的平均水平滑动速率为 3 16mm/a ,垂直滑动速率为 0 .83mm/a 相似文献
16.
Introduction The Tanlu fault zone, the largest active structure in the eastern region of China, is character-ized by right lateral strike-slip movement with dip-slip component in the Quaternary; it shows great significance for the modern seismicity (FANG et al, 1976; Institute of Geophysics, China Earthquake Administration, 1987; GAO et al, 1980; MA, 1987; LI, 1989; CHAO et al, 1995). The Tanlu fault zone is the boundary between the Jiaoliao block and the North China Plain block of … 相似文献
17.
On August 8, 2017, Beijing time, an earthquake of M7.0 occurred in Jiuzhaigou County, Aba Prefecture, Sichuan Province, with the epicenter located at 33.20°N 103.82°E. The earthquake caused 25 people dead, 525 people injured, 6 people missing and 170000 people affected. Many houses were damaged to various degrees. Up to October 15, 2017, a total of 7679 aftershocks were recorded, including 2099 earthquakes of M ≥ 1.0.
The M7.0 Jiuzhaigou earthquake occurred in the northeastern boundary belt of the Bayan Har block on the Qinghai-Tibet Plateau, where many active faults are developed, including the Tazhong Fault(the eastern segment of the East Kunlun Fault), the Minjiang fault zone, the Xueshan fault zone, the Huya fault zone, the Wenxian fault zone, the Guanggaishan-Daishan Fault, the Bailongjiang Fault, the Longriuba Fault and the Longmenshan Fault. As one of the important passages for the eastward extrusion movement of the Qinghai-Tibet Plateau(Tapponnier et al., 2001), the East Kunlun fault zone has a crucial influence on the tectonic activities of the northeastern boundary belt of Bayan Kala. Meanwhile, the Coulomb stress, fault strain and other research results show that the eastern boundary of the Bayan Har block still has a high risk of strong earthquakes in the future. So the study of the M7.0 Jiuzhaigou earthquake' seismogenic faults and stress fields is of great significance for scientific understanding of the seismogenic environment and geodynamics of the eastern boundary of Bayan Har block.
In this paper, the epicenter of the main shock and its aftershocks were relocated by the double-difference relocation method and the spatial distribution of the aftershock sequence was obtained. Then we determined the focal mechanism solutions of 24 aftershocks(M ≥ 3.0)by using the CAP algorithm with the waveform records of China Digital Seismic Network. After that, we applied the sliding fitting algorithm to invert the stress field of the earthquake area based on the previous results of the mechanism solutions. Combining with the previous research results of seismogeology in this area, we discussed the seismogenic fault structure and dynamic characteristics of the M7.0 Jiuzhaigou earthquake. Our research results indicated that:1)The epicenters of the M7.0 Jiuzhaigou earthquake sequence distribute along NW-SE in a stripe pattern with a long axis of about 35km and a short axis of about 8km, and with high inclination and dipping to the southwest, the focal depths are mainly concentrated in the range of 2~25km, gradually deepening from northwest to southeast along the fault, but the dip angle does not change remarkably on the whole fault. 2)The focal mechanism solution of the M7.0 Jiuzhaigou earthquake is:strike 151°, dip 69° and rake 12° for nodal plane Ⅰ, and 245°, 78° and -158° for nodal plane Ⅱ, the main shock type is pure strike-slip and the centroid depth of the earthquake is about 5km. Most of the focal mechanism of the aftershock sequence is strike-slip type, which is consistent with the main shock's focal mechanism solution; 3)In the earthquake source area, the principal compressive stress and the principal tensile stress are both near horizontal, and the principal compressive stress is near east-west direction, while the principal tensile stress is near north-south direction. The Jiuzhaigou earthquake is a strike-slip event that occurs under the horizontal compressive stress. 相似文献
18.
利用浅地层剖面仪对郯庐断裂带莱州湾段进行了活断层探测，发现郯庐断裂带主干断裂在第四纪晚期以来具有明显的活动，继承了晚第三纪以来的主要构造活动特点，仍是这一区域的主导性构造. 西支KL3断裂由多条高角度正断裂组成，最新活动时代为晚更新世晚期至全新世早期，受到一系列错断晚更新世晚期沉积的北东或近东西向断裂的切割；东支龙口断裂由两段右阶斜列的次级断层组成，沿断裂带不但有明显的晚第四纪断错活动，而且还发育北北东向晚第四纪生长褶皱，表现出明显的晚更新世晚期至全新世活动特征. 在山东陆地区也发现了与龙口断裂相对应的安丘——莒县断裂，安丘段由一系列右阶斜列的次级断层组成. 从安丘向北至莱州湾凹陷，郯庐断裂带东支活断层构成了一条右旋单剪变形带，每一个次级活断层段相当于带内理论上次级压剪面，在第四纪晚期以来仍以右旋走滑活动为主要特征. 相似文献
19.
LATE QUATERNARY ACTIVITY OF THE CENTRAL SEGMENT OF THE DARI FAULT AND RESTUDY OF THE SURFACE RUPTURE ZONE OF THE 1947 M73/4 DARI EARTHQUAKE,QINGHAI PROVINCE 下载免费PDF全文
下载免费PDF全文 Bayan Hara Block is one of the most representative active blocks resulting from the lateral extrusion of Tibet Plateau since the Cenozoic. Its southern and northern boundary faults are characterized by typical strike-slip shear deformation. Its eastern boundary is blocked by the Yangze block and its horizontal movement is transformed into the vertical movement of the Longmen Shan tectonic belt, leading to the uplift of the Longmen Shan Mountains and forming a grand geomorphic barrier on the eastern margin of the Tibet Plateau. A series of large earthquakes occurred along the boundary faults of the Bayan Hara Block in the past twenty years, which have attracted attention of many scholars. At present, the related studies of active tectonics on Bayan Hara Block are mainly concentrated on the boundary faults, such as Yushu-Ganzi-Xianshuihe Fault, East Kunlun Fault and Longmen Shan Fault. However, there are also some large faults inside the block, which not only have late Quaternary activity, but also have tectonic conditions to produce strong earthquake. These faults divide the Bayan Hara Block into some secondary blocks, and may play important roles in the kinematics and dynamics mechanism of the Bayan Hara Block, or even the eastern margin of the Tibet Plateau. The Dari Fault is one of the left-lateral strike-slip faults in the Bayan Hara Block. The Dari Fault starts at the eastern pass of the Kunlun Mountains, extends eastward through the south of Yalazela, Yeniugou and Keshoutan, the fault strike turns to NNE direction at Angcanggou, then turns to NE direction again at Moba town, Qinghai Province, and the fault ends near Nanmuda town, Sichuan Province, with a total length of more than 500km. The fault has been considered to be a late Quaternary active fault and the 1947 M73/4 Dari earthquake was produced by its middle segment. But studies on the late Quaternary activity of the Dari Fault are still weak. The previous research mainly focused on the investigation of the surface rupture and damages of the 1947 M73/4 Dari earthquake. However, there were different opinions about the scale of the M73/4 earthquake surface rupture zone. Dai Hua-guang(1983)thought that the surface rupture of the earthquake was about 150km long, but Qinghai Earthquake Agency(1984) believed that the length of surface rupture zone was only 58km. Based on interpretation of high-resolution images and field investigations, in this paper, we studied the late Quaternary activity of the Dari Fault and the surface rupture zone of the 1947 Dari earthquake. Late Quaternary activity in the central segment of the Dari Fault is particularly significant. A series of linear tectonic landforms, such as fault trough valley, fault scarps, fault springs and gully offsets, etc. are developed along the Dari Fault. And the surface rupture zone of the 1947 Dari earthquake is still relatively well preserved. We conducted a follow-up field investigation for the surface rupture zone of the 1947 Dari earthquake and found that the surface rupture related to the Dari earthquake starts at Longgen village in Moba town, and ends near the northwest of the Yilonggounao in Jianshe town, with a length of about 70km. The surface rupture is primarily characterized by scarps, compressional ridges, pull-apart basins, landslides, cleavage, and the coseismic offset is about 2~4m determined by a series of offset gullies. The surface rupture zone extends to the northwest of Yilonggounao and becomes ambiguous. It is mainly characterized by a series of linear fault springs along the surface rupture zone. Therefore, we suggest that the surface rupture zone of the 1947 Dari earthquake ends at the northwest of Yilonggounao. In summary, the central segment of the Dari Fault can be characterized by strong late Quaternary activity, and the surface rupture zone of the 1947 Dari earthquake is about 70km long. 相似文献
20.
Coseismic deformation of the 2021 MW7.4 Maduo earthquake from joint inversion of InSAR,GPS, and teleseismic data 下载免费PDF全文
下载免费PDF全文 Chaoya Liu Ling Bai Shunying Hong Yanfang Dong Yong Jiang Hongru Li Huili Zhan Zhiwen Chen 《地震科学（英文版）》2021,34(5):436-446
The MW7.4 Maduo earthquake occurred on 22 May 2021 at 02:04 CST with a large-expansion surface rupture. This earthquake was located in the Bayan Har block at the eastern Tibetan Plateau, where eight earthquakes of MS >7.0 have occurred in the past 25 years. Here, we combined interferometric synthetic aperture radar, GPS, and teleseismic data to study the coseismic slip distribution, fault geometry, and dynamic source rupture process of the Maduo earthquake. We found that the overall coseismic deformation field of the Maduo earthquake is distributed in the NWW-SEE direction along 285°. There was slight bending at the western end and two branches at the eastern end. The maximum slip is located near the eastern bending area on the northern branch of the fault system. The rupture nucleated on the Jiangcuo fault and propagated approximately 160 km along-strike in both the NWW and SEE directions. The characteristic source rupture process of the Maduo earthquake is similar to that of the 2010 MW6.8 Yushu earthquake, indicating that similar earthquakes with large-expansion surface ruptures and small shallow slip deficits can occur on both the internal fault and boundary fault of the Bayan Har block. 相似文献