共查询到20条相似文献，搜索用时 31 毫秒
1.
P. Gouédard L. Stehly F. Brenguier M. Campillo Y. Colin de Verdière E. Larose L. Margerin P. Roux F. J. Sánchez-Sesma N. M. Shapiro R. L. Weaver 《Geophysical Prospecting》2008,56(3):375-393
Random field cross‐correlation is a new promising technique for seismic exploration, as it bypasses shortcomings of usual active methods. Seismic noise can be considered as a reproducible, stationary in time, natural source. In the present paper we show why and how cross‐correlation of noise records can be used for geophysical imaging. We discuss the theoretical conditions required to observe the emergence of the Green's functions between two receivers from the cross‐correlation of noise records. We present examples of seismic imaging using reconstructed surface waves from regional to local scales. We also show an application using body waves extracted from records of a small‐scale network. We then introduce a new way to achieve surface wave seismic experiments using cross‐correlation of unsynchronized sources. At a laboratory scale, we demonstrate that body wave extraction may also be used to image buried scatterers. These works show the feasibility of passive imaging from noise cross‐correlation at different scales. 相似文献
2.
Jing Liu Youcai Tang Kai Tao Chunquan Yu Jie Chen Jieyuan Ning Yongshun John Chen Yongge Feng 《地震科学（英文版）》2010,23(6):627-636
We have developed a new stacking technique in ambient noise tomography to obtain high-quality dispersion curves of Rayleigh waves.This technique is used to stack the vertical components of the Estimated Green Functions(EGFs) obtained respectively from cross correlation of the ambient noise data recorded by a remote seismic station and one of the short distance seismic stations of a seismic array.It is based on a phase-matched filter and is implemented by a four-step iterative process:signal compression,stacking,signal extraction and signal decompression.The iterative process ends and gives the dispersion curve of Rayleigh wave when the predicted one and the processing result converge.We have tested the method using the vertical components of synthetic Rayleigh wave records.Results show that this new stacking method is stable and it can improve the quality of dispersion curves.In addition,we have applied this method to real data.We see that the results given by our new technique are obviously better than the ones employing the traditional method which is a three-step process:signal compression,signal extraction and signal decompression.In conclusion,the new method proposed in this paper can improve the signal to noise ratio of EGFs,and can therefore potentially improve the resolution of ambient noise tomography. 相似文献
3.
本文利用波形相关分析法对井下地震计方位角检测精度及一致性进行分析研究.研究中在地表布设地震计进行不同距离、不同频带多套地震计方位角检测对比测试,并在四川泸州、宁夏灵武、陶乐、河南安阳、清丰、陕西定边等6个分别安装井下甚宽频带、宽频带、短周期地震计的台站,进行地表同台址不同频带多套地震计与井下地震计方位角检测及一致性对比测试.根据全球噪声模型1~10s之间存在明显的噪声峰值的特点,对测试数据进行0.2~0.3Hz带通滤波和仿真处理,通过分析得出,对于不同地震计组合,测试地震计方位角检测结果一致性较好,根据地表不同距离、不同频带地震计组合的检测精度和地脉动记录的特点,认为井下地震计方位角检测精度优于4°. 相似文献
4.
5.
6.
The time variability of diurnal tides was investigated by analyzing gravity observations from global superconducting gravimeter (SG) stations with running time intervals. Through least-square and Bayesian approaches, FCN resonance parameters were estimated for each data section after obtaining the tidal parameters of mainly diurnal tidal waves. The correlation of the time variation in diurnal tidal waves and FCN period was discussed. For comparison, a similar method was used to analyze VLBI observations to study the time variability of nutation terms and FCN period. The variation trend of the FCN period totally depends on the Ψ1 wave in tidal gravity and on the retrograde annual term in nutation. We observed a similar variation trend in the FCN periods obtained from different SG stations worldwide and VLBI observations. The relation between diurnal tides and LOD variations is discussed and the possible mechanisms of the decadal variation in FCN periods were discussed. 相似文献
7.
Comparison of ground truth location of earthquake from InSAR and from ambient seismic noise:A case study of the 1998 Zhangbei earthquake 
下载免费PDF全文
下载免费PDF全文 Because ambient seismic noise provides estimated Greenos function (EGF) between two sites with high accuracy, Rayleigh wave propagation along the path connecting the two sites is well resolved. Therefore, earthquakes which are close to one seismic station can be well located with calibration extracting from EGF. We test two algorithms in locating the 1998 Zhangbei earthquake, one algorithm is waveform-based, and the other is traveltime-based. We first compute EGF between station ZHB (a station about 40 km away from the epicenter) and five IC/IRIS stations. With the waveform-based approach, we calculate 1D synthetic single-force Greenos functions between ZHB and other four stations, and obtain traveltime corrections by correlating synthetic Greenos functions with EGFs in period band of 10-30 s. Then we locate the earthquake by minimizing the differential travel times between observed earthquake waveform and the 1D synthetic earthquake waveforms computed with focal mechanism provided by Global CMT after traveltime correction from EGFs. This waveform-based approach yields a location which error is about 13 km away from the location observed with InSAR. With the traveltime-based approach, we begin with measuring group velocity from EGFs as well as group arrival time on observed earthquake waveforms, and then locate the earthquake by minimizing the difference between observed group arrival time and arrival time measured on EGFs. This traveltime-based approach yields accuracy of 3 km, Therefore it is feasible to achieve GT5 (ground truth location with accuracy 5 km) with ambient seismic noises. The less accuracy of the waveform-based approach was mainly caused by uncertainty of focal mechanism. 相似文献
8.
Rayleigh wave imaging is efficient in estimating the shear- (S) wave velocity in near-surface exploration. The key is to accurately extract the dispersion of Rayleigh wave. We propose a method to calculate the dispersion of the active-source Rayleigh wavefield by using the Aki formulation. The spectrum after the cross correlation of two-channel records in the frequency domain is expressed by the Bessel function. Using the corresponding relation between the zero point of the spectrum real part and the Bessel function root, the phase velocity at the discrete frequency point is obtained and the dispersion curve is extracted. First, the theoretical basis and calculation method used in the active-source Rayleigh wave data are introduced. Then, three sets of theoretical models are calculated by this method and the results are consistent with the theoretical dispersion. Finally, we process a group of real Rayleigh wave data and obtain the phase velocity profiles and compared them with the results obtained by the multichannel surface wave analysis method. The effectiveness and applicability of the Aki method in active-source data processing are verified. Compared with multichannel wave processing, the advantage of the Aki method lies in the use of two-channel data in a single-shot record. When the number of acquisition channels in a shot gathers is insufficient or there is a bad channel, the quality of the extracted dispersion is guaranteed. 相似文献
9.
以内蒙古乌加河地震台的连续重力观测资料为基础,应用PET重力仪采样率较高的特点,分析了PET相对重力仪与JCZ-1甚宽带地震仪的波形相关关系及同震形变物理特征。通过模拟分析乌加河地震台PET相对重力仪记录到巴颜喀拉块体周围发生的6次7级以上强地震的同震P波、S波及面波与震中距离、震级的相关关系,得出一般震级模型、地应力波模型和S波P波幅度比模型公式。通过计算3种震级模型理论震级与实际震级的误差及相关系数R值,得到理论震级与实测震级标准误差达到0.04,R值达到0.99,验证了模型的可靠性。对比分析理论震级与实际震级的误差与R值,揭示同震形变波形蕴含地球动力特征的物理机制。 相似文献
10.
介绍了一种用冲击不变法从速度响应平坦地震计二阶传递函数设计得到的递归滤波方法,比用双线性变换得到的递归滤波系数少,因此使用更方便.作者用此方法作了反褶积与仿真的数值实验和实际地震记录的短周期仿真试验,仿真结果与实际仪器记录符合较好;并将此法应用于地震计方位角的相关分析法相对测量,结果与不仿真的相关分析测量相比更接近寻北仪的绝对测量结果. 相似文献
11.
12.
Long gravity records are of great interest when performing tidal analyses. Indeed, long series enable to separate contributions of near-frequency waves and also to detect low frequency signals (e.g. long period tides and polar motion). In addition to the length of the series, the quality of the data and the temporal stability of the noise are also very important. We study in detail some of the longest gravity records available in Europe: 3 data sets recorded with spring gravimeters in Black Forest Observatory (Germany, 1980–2012), Walferdange (Luxemburg, 1980–1995) and Potsdam (Germany, 1974–1998) and several superconducting gravimeters (SGs) data sets, with at least 9 years of continuous records, at different European GGP (Global Geodynamics Project) sites (Bad Homburg, Brussels, Medicina, Membach, Moxa, Vienna, Wettzell and Strasbourg). The stability of each instrument is investigated using the temporal variations of tidal parameters (amplitude factor and phase difference) for the main tidal waves (O1, K1, M2 and S2) as well as the M2/O1 factor ratio, the later being insensitive to the instrumental calibration. The long term stability of the tidal observations is also dependent on the stability of the scale factor of the relative gravimeters. Therefore we also check the time stability of the scale factor for the superconducting gravimeter C026 installed at the J9 Gravimetric Observatory of Strasbourg (France), using numerous calibration experiments carried out by co-located absolute gravimeter (AG) measurements during the last 15 years. The reproducibility of the scale factor and the achievable precision are investigated by comparing the results of different calibration campaigns. Finally we present a spectrum of the 25 years of SG records at J9 Observatory, with special attention to small amplitude tides in the semi-diurnal and diurnal bands, as well as to the low frequency part. 相似文献
13.
强震仪和测震仪均能记录地面运动,强震仪输出的加速度记录主要用于分析结构地震反应,测震仪输出的速度记录常用于确定地震信息.由于这2种记录均描述地面运动,且覆盖结构地震反应分析所需频带范围,速度记录能否用于计算结构地震反应引起了人们的关注.为分析开源Hi-net速度记录用于计算结构地震反应时的精度,作者选取同台记录的加速度... 相似文献
14.
利用重力异常反演测试三维地震波速度结构,存在解不唯一、可靠性不高的问题。将面波反演充分融合到重力异常反演方程中,降低传统反演方法的非唯一性,并提升可靠性。以川滇地区为例,采用融合后的重力异常反演方法分析三维地震波速度结构。通过速度和密度的关系转换,得到对应的重力异常数据。由于面波频射数据主要对地震波横波速度敏感,因此将重力异常数据和初始横波速度相连,依据地震波速度和岩石密度之间的关系,获取重力异常反演方程,用于分析速度结构。选取21.6°~34.2°N、97.1°~105.9°E范围内的川滇地区活动块体作为实验数据,经过实验分析发现：使用该方法迭代反演川滇地区地壳上地幔顶部横波速度,重力异常数据和面波频射数据的残差值分别是6.24 mGal和0.027 km/s,实际拟合效果较好;分析该地区不同深度切面横波速度发现,在24 km深度处,上地壳中含有相对低速层,在44 km深度处,中下地壳中存在低速层;且该方法分析川滇地区三维地震波速度结构解的分辨率较高。 相似文献
15.
以中国大陆构造环境监测网络昆明台和恩施台gPhone相对重力仪连续重力潮汐观测数据为基础,研究了gPhone重力仪在1 mHz以上频段的高频响应。从瑞利面波角度获得gPhone重力仪的高频响应,并且通过与同址观测的STS-1地震仪LHZ分量数据进行对比,验证了gPhone重力仪高频观测结果的可靠性。对比从gPhone重力仪和STS-1地震仪观测数据中提取到的面波波形和群速度频散曲线,发现昆明台两类仪器观测到面波信号的振幅和相位都较为一致,而恩施台仅振幅较为一致,相位上存在较明显差异,gPhone重力仪记录的面波信号在各频段存在不同的时间延迟。用两类仪器观测数据获得了大地震激发的自由振荡,结果表明两类仪器观测到的基频球型模态自由振荡的频率和振幅都吻合较好,进一步验证了gPhone重力仪对高频频段信号振幅响应的可靠性。以上研究结果表明:利用gPhone重力仪能够准确地观测到大地震激发的面波和自由振荡等高频信号的振幅,但在记录信号的相位信息时,有些仪器会有相位偏移产生,如果研究中需要考虑信号的相位,则必须获得仪器相位偏移量,再进行仪器相位校正。 相似文献
16.
云南地区背景噪声互相关函数中体波信号来源初探 总被引：3，自引：0，他引：3
利用云南地区43个宽频带地震台站记录的2008～2010年垂直分量数据,计算了台站对间的互相关函数并得到了5～40 s周期的瑞利面波信号。研究发现在5～10 s周期范围内,瑞利面波信号之前存在很强的前驱信号,该信号能量优势频段为0.1～0.2 Hz,其到时接近噪声互相关函数零点,视速度约为30 km/s。该信号到时随季节存在正负交替变化,进一步的质点分析表明该信号为出射角较小的P波信号。参考已有的研究,认为远场地脉动噪声源中的P波信号穿过地球深部到达云南地区,形成了噪声互相关函数中视速度较高的体波信号,并且相关的噪声源位置在冬季和夏季分别位于北太平洋和南印度洋,具有明显的季节性空间变化。 相似文献
17.
Data from a superconducting gravimeter were obtained from the Geodetic Observatory Pecny (GOPE), Czech Republic, and compared with acceleration data from a broadband seismometer at the same location. We calculated synthetic seismograms for several point- and finite-source fast solutions of the 2011 Tohoku earthquake obtained from surface waves and tested them only against the observed gravity data because of high-noise levels in the low-frequency seismic data. We have obtained a good fit of the synthetic amplitude spectrum with the data up to 1.7 mHz without an additional increase of the moment magnitude Mw. In this aspect, the 2011 Tohoku earthquake was similar to the 2010 Maule earthquake and different from the 2004 Sumatra-Andaman earthquake, where the free-oscillations studies resulted in an increase of the early Mw values. The degree-one mode 3S{ia1} dominates the 3S1?C2S2?C1S3 triplet at the GOPE station. 相似文献
18.
用高精度重力技术检测地球自由核章动(FCN)参数(包括周期和Q值等)的难点是资料观测信噪比低,传统的方法是使用最小二乘拟合,但是获得的FCN共振参数精度不理想.本文利用武汉国际潮汐基准站高精度超导重力仪和全球超导重力仪观测的时变重力资料,根据贝叶斯算法拟合地球自由核章动(FCN)参数.我们将贝叶斯拟合方法与传统最小二乘法实施了对比分析,研究了不同台站资料差异.讨论了潮波选择和不同海潮模型等因素对FCN参数的影响.结果表明用贝叶斯算法获得的FCN品质因子与空间大地测量VLBI结果吻合的更好,这说明贝叶斯算法可靠性高,为研究地球深内部构造参数(核幔边界粘滞系数等)提供了有效依据. 相似文献
19.
利用滤波分析法对山东泰安地震台重力固体潮观测的分析表明,重力观测中存在大量高频扰动信号.通过与气象观测实况资料的对比发现,这些异常扰动信号除了受台风等热带气旋影响外,还明显与“冷空气”过境等区域强对流天气有关. 对泰安台JCZ-1甚宽频带地震仪观测资料的频谱分析和滤波处理进一步表明,区域强对流天气及台风对重力仪的影响频段均在1—8 s范围内,其中2—6 s区间影响最为显著; 强对流天气过程触发的扰动信号范围可以在1—16 s,但8 s后扰动信号对重力仪观测基本不造成影响,即重力仪对高频扰动信号的响应存在8 s的截止周期.JCZ-1甚宽频带地震仪的波谱分析还反映出扰动信号的动态特征,即强对流天气产生的扰动信号在发展、传播过程中,首先出现的信号频率较高,随着时间推移信号逐渐向低频演化,揭示了干扰信号传播的多普勒效应以及扰动信号激发源的移动特性. 相似文献
20.
本文利用中国科学院空间科学与应用研究中心的瑞利激光雷达首次观测到了平流层地形重力波活动的现象,并结合美国国家环境预报中心(NCEP)的全球预报系统(GFS)的风场数据分析了该地形重力波的基本参数.与惯性重力波相比较,地形重力波的密度扰动没有下传的相位,在同一高度上,其扰动相位保持不变.北京空间科学与应用研究中心瑞利激光雷达自2012年开始观测实验以来,已经观测到多起地形重力波活动事件.本文以2013年11月11日的观测数据为例,研究北京上空的地形重力波活动,并结合GFS风场数据分析了北京上平流层地形重力波的波长、传播方向、传播速度等参量.通过分析得到在2013年11月11日北京上空存在一列传播方向为北偏西52.4°,水平波长为5.5km,平均垂直波长约为6.0km的地形重力波. 相似文献