首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 62 毫秒
1.
Introduction Identifying rupture directions of earthquakes is one of important aspects in focal mechanism research. For moderate-strong events, at present, directions of their main ruptures are usually extrapolated from focal mechanism solutions by combining information about distributions of aftershocks and surface ruptures, or/and extends of iso-seismal major axes. However,  相似文献   

2.
The method of sliding direction fitting is used to determine stress districts, taking the shear stress directions and ratios of shear stress to stress on fault planes given by focal mechanism solutions as the criteria to select focal mechanism solutions of one region and sorting out the earthquakes controlled by different tectonic stress fields, and then determining the stress districts from epicenter distribution of earthquakes. We call this method as step by step convergence method. By inversion analyzing of 297 focal mechanism solutions, we consider that Southwest China and its adjacent area can be divided into 5 stress districts, and we worked out directions of the three principal stresses and values of shape factor φin 5 stress districts.  相似文献   

3.
Based on P- and S-wave amplitudes and some clear initial P-wave motion data, we calculated focal mechanism solutions of 928 M≥2.5 earthquakes (1994-2005) in four sub-blocks of Sichuan and Yunnan Provinces, namely Sichuan-Qinghai, Yajiang, Central Sichuan and Central Yunnan blocks. Combining these calculation results with those of the focal mechanism solutions of moderately strong earthquakes, we analyzed the stress field characteristics and dislocation types of seismogenic faults that are distributed in the four sub-blocks. The orientation of principal compressive stress for each block is: EW in Sichuan-Qinghai, ESE or SE in Yajiang, Central Sichuan and Central Yunnan blocks. Based on a great deal of focal mechanism data, we designed a program and calculated the directions of the principal stress tensors, σ1, σ2 and σ3, for the four blocks. Meanwhile, we estimated the difference (also referred to as consistency parameter θ^- ) between the force axis direction of focal mechanism solution and the direction of the mean stress tensor of each block. Then we further analyzed the variation of θ^- versus time and the dislocation types of seismogenic faults. Through determination of focal mechanism solutions for each block, we present information on the variation in θ^- value and dislocation types of seismogenic faults.  相似文献   

4.
From focal mechanism solutions of the earthquakes in the northern part of North China during the period of 2002~2006,the directions of principal stress axes in 4 stress sub-districts are analyzed using a grid test method.The characteristic of present crustal stress directions is discussed.Based on this result and on the focal mechanism solutions calculated for some events in the period of 1977~1998,in combination with some other study results,the temporal variation of present crustal stress directions in the northern part of North China is investigated.The re-sults confirm that the direction of crustal principal stress in some regions had somewhat rotated after the 1976 Tangshan M7.8 earthquake.The mean P axes of the focal mechanism solutions rotated clockwise not only in Tangshan sub-district,but also in Beijing and Xingtai sub-districts after the Tangshan earthquake.In Beijing and Xingtai sub-districts the orientations of principal stress axes in the period of 2002~2006 are consistent with that before the Tangshan earthquake,implying that the stress orientations has rotated back to the state before the Tang-shan earthquake in these two sub-districts.The directions of the mean P axes are nearly E-W in Tangshan sub-dis-trict since the M7.8 earthquake.The present stress field in the sub-district northwest to Beijing,or in the western part of the Zhangjiakou-Bohai fault zone,is relatively stable during the time period concerned in this study.Because of the limitation of data,this paper only states a possible variation of stress field in the northern part of North China in the recent decades.  相似文献   

5.
Focal Fault of the 1999 Datong Ms5.6 Earthquake in Shanxi Province   总被引:1,自引:0,他引:1  
Several earthquakes with Ms≥5.0 occurred in the Datong seismic region in 1989,1991 and 1999,The precise focus location of the earthquake sequence was made by the records of the remote sensing seismic station network in Datong.Using that data together with macro-intensity distribution and focal mechanism solutions,we analyze the difference among three subsequences.The results show that the focal fault of the 1999 Ms 5.6 earthquake was a NWW-trending left-lateral strike-slip fault.It is 16km long and 12km wide.It developed at the depth of 5km and is nearly vertical in dip.The two previous earthquake subsequences,however,were generated by activity along NNE-trending right-lateral strike-slip fault.It can be found that the rupture directioin of the 1999 earthquake has changed.It is generally found that a rupture zone has more than two directions and has different strength along these two directions.The complicate degree of focal circumstance is related to the type of earthquake sequences.There is the NE-trending Dawangcun fault and the NW-trending Tuanbu fault in the seismic region,but no proof indicates a connection between focal faults and these two tectonic faults.The feature that focal faults of three subsequences are strike-slip is different from that of the two tectonic faults.It is suggested that the 1999 earthquake subsequence was possibly generated by a new rupture.  相似文献   

6.
The currently used methods for analyzing a number of focal mechanism solutions are often ineffective for large samples.With the aid of the basic concept of hierarchical clustering methods for pattern recognition and in combination with the expression of focal mechanism solutions themselves,the sum of the angle between P-axes and the angle between T-axes of 2 solutions is defined as a distance,and a software for hierarchical clustering analysis by the shortest distance method and longest distance method is compiled.The number of types in the clustering results can be determined in accordance with different requirements.For focal mechanism solutions of the same type,the average position of each stress axis can be calculated by the method of vector composition and thereby the spatial orientation of the average focal mechanism solution can be determined.In order to test the feasibility and reliability of the software,hierarchical clustering analyses are made for the focal mechanism solutions of 24 earthquak  相似文献   

7.
Introduction Analyzing tectonic stress field based on focal mechanism data is an important way to the study tectonic evolvement of lithosphere and associated dynamic process. Such studies growrapidly in China and abroad (Zoback, 1992; Plenefisch, Bonjer, 1997; XU, 1985; CUI, XIE, 1999). At present most of the studies focus on the inversion of focal mechanism data for the direction and relative magnitude of stress tensor, and few on absolute stress. Using focal mechanism and fault scratch,…  相似文献   

8.
Taking the 2013 Tongliao MS5. 3 earthquake as a research subject, on the basis of statistical analysis of earthquake sequence using the HypoDD location method and focal mechanism solutions,the paper analyzes and discusses the relationship between the ML4. 4 and MS5. 3 earthquakes. The results show that the Tongliao MS5. 3 earthquake occurred under the background of medium-small earthquakes long-term quiescence and short-term enhancement in the epicentral area. The results of accurate seismic location shows that the Tongliao MS5. 3 earthquake sequence is distributed in the NW direction,extending 10 km,and the ML≥3. 0 aftershocks are concentrated south of the mainshock. The distance between the MS5. 3 mainshock and the ML4. 4 foreshock is about 1. 8 km,with a focal depth of 7. 208 km and 7. 089 km,respectively,their focal location is very close,and may have occurred on the same fault plane. The results of focal mechanism shows that the Tongliao MS5. 3 earthquake is of the strike-slip type,the focal mechanism of aftershocks are disordered,and with time lapse,the type is changed from strike-slip to thrust and normal faulting. The bigger foreshocks had similar focal mechanism and were all normal fault types,which exhibits to some extent,an obvious crustal medium anisotropy in the epicentral area before macroscopic rupturing,as represented by alignment fractures,with stress action enhanced,this"consistency"of seismic precursor regime would gestate the mainshock. According to the characteristics of temporal-spatial distribution of earthquake sequence and similarity of focal mechanism,we judge that the Tongliao MS5. 3 earthquake sequence is a foreshock-mainshock-aftershock type.  相似文献   

9.
An earthquake with MS4.6 occurred at 17:08 p.m., May 22, 2016 in Chaoyang County, Liaoning Province. We used the P-wave first motion method, TDMT method, and CAP method to determine the focal mechanisms and the PTD method and sPn-Pn method to determine the focal depth. The focal mechanism results of the three methods are consistent. The depth results of the CAP method, PTD method and sPn-Pn method are close. We used the double difference location method to relocate earthquakes in 2009-2016, and obtained the strikes and dip angles of the small earthquake distributions with the help of simulated annealing algorithm and gauss Newton algorithm fitting. According to the focal mechanism results, the depth results, the characteristics of small earthquake distributions and the structural characteristics of the source area, the seismogenic fault strike is NEE and the main pressure force direction is NNW. The earthquake focal mechanism is for a normal fault type with a little left-lateral strike slip motion.  相似文献   

10.
The focal mechanism parameters of small earthquakes are determined by the maximum velocity and displacement amplitude ratio of the direct ^-P- and ^-S-waves recorded by digital stations. The displacement is obtained from the velocity by emulation, and the two results are compared and analyzed. Results of theoretical analysis and practical measurement indicate that the two results of velocity and displacement are consistent, and it is feasible that the maximum displacement amplitude ratio be replaced by the maximum velocity amplitude ratio of the direct ^-P-and ^-S- waves recorded by regional seismic networks when determining focal mechanism solutions of small earthquakes.  相似文献   

11.
12.
13.
Selecting three half orbits near the epicenter of Pu’er earthquake, we analyzed the Ne data recorded in their revis-ited orbits during a year before this earthquake, and extracted Ne precursors. The results show that: ① There are significant seasonal variations of ionospheric Ne in night time, which exhibit different shapes respectively in four seasons; ② There are three main shapes of Ne: single-peak, saddle-shaped and even-shaped, all of which may oc-cur in four seasons, but each season with its typical shape relatively; ③ Spatial images of Ne showed high values near the epicenter in 30 days before the earthquake, and there is a good correlation between anomaly and distribu-tion of earthquake in space and time, which reflects that these spatial anomalies were indeed concerned with the earthquake; ④There shows a certain similarity of the Ne curves among revisited orbits, which can provide back-ground information for distinguishing and identification of seismic anomaly.  相似文献   

14.
15.
Field investigations following the 2008 Wenchuan earthquake (Ms=8.0) identified 118 liquefaction sites nearly all of which are underlain by gravelly sediment in the Chengdu Plain and adjacent Mianyang area. Field studies, including core drilling, dynamic penetration tests (DPT), and multiple channel analysis of surface wave velocity tests (MASW) for measurement of shear wave velocities, reveal the following: (1) Sand boils and ground fissures, indicative of liquefaction, occurred across hundreds of square kilometers affecting 120 villages, 8 schools and 5 factories. (2) The Chengdu plain is underlain by sandy gravels ranging in thickness up to 540 m; loose upper layers within the gravels beds liquefied. (3) Mean grain sizes for gravelly layers that liquefied range from 1 mm to more than 30 mm. (4) Shear wave velocities in gravels that liquefied range up to 250 m/s. (5) A 50% probability curve, developed from logistic procedures, correctly bounds all but four data points for the 47 compiled Vs data.  相似文献   

16.
We report on the development and current capabilities of the ALOMAR Rayleigh/Mie/Raman lidar. This instrument is one of the core instruments of the international ALOMAR facility, located near Andenes in Norway at 69°N and 16°E. The major task of the instrument is to perform advanced studies of the Arctic middle atmosphere over altitudes between about 15 to 90 km on a climatological basis. These studies address questions about the thermal structure of the Arctic middle atmosphere, the dynamical processes acting therein, and of aerosols in the form of stratospheric background aerosol, polar stratospheric clouds, noctilucent clouds, and injected aerosols of volcanic or anthropogenic origin. Furthermore, the lidar is meant to work together with other remote sensing instruments, both ground- and satellite-based, and with balloon- and rocket-borne instruments performing in situ observations. The instrument is basically a twin lidar, using two independent power lasers and two tiltable receiving telescopes. The power lasers are Nd:YAG lasers emitting at wavelengths 1064, 532, and 355 nm and producing 30 pulses per second each. The power lasers are highly stabilized in both their wavelengths and the directions of their laser beams. The laser beams are emitted into the atmosphere fully coaxial with the line-of-sight of the receiving telescopes. The latter use primary mirrors of 1.8 m diameter and are tiltable within 30° off zenith. Their fields-of-view have 180 rad angular diameter. Spectral separation, filtering, and detection of the received photons are made on an optical bench which carries, among a multitude of other optical components, three double Fabry-Perot interferometers (two for 532 and one for 355 nm) and one single Fabry-Perot interferometer (for 1064 nm). A number of separate detector channels also allow registration of photons which are produced by rotational-vibrational and rotational Raman scatter on N2 and N2+O2 molecules, respectively. Currently, up to 36 detector channels simultaneously record the photons collected by the telescopes. The internal and external instrument operations are automated so that this very complex instrument can be operated by a single engineer. Currently the lidar is heavily used for measurements of temperature profiles, of cloud particle properties such as their altitude, particle densities and size distributions, and of stratospheric winds. Due to its very effective spectral and spatial filtering, the lidar has unique capabilities to work in full sunlight. Under these conditions it can measure temperatures up to 65 km altitude and determine particle size distributions of overhead noctilucent clouds. Due to its very high mechanical and optical stability, it can also employed efficiently under marginal weather conditions when data on the middle atmosphere can be collected only through small breaks in the tropospheric cloud layers.  相似文献   

17.
A MS6.8 earthquake occurred on 5th September 2022 in Luding county, Sichuan, China, at 12: 52 Beijing Time (4:52 UTC). We complied a dataset of PGA, PGV, and site vS30 of 73 accelerometers and 791 Micro-Electro-Mechanical System (MEMS) sensors within 300 km of the epicenter. The inferred vS30 of 820 recording sites were validated. The study results show that: (1) The maximum horizontal PGA and PGV reaches 634.1 Gal and 71.1 cm/s respectively. (2) Over 80% of records are from soil sites. (3) The vS30 proxy model of Zhou J et al. is superior than that of Wald and Allen and performs well in the study area. The dataset was compiled in a flat file that consists the information of strong-motion instruments, the strong-motion records, and the vS30 of the recording sites. The dataset is available at https://www.seismisite.net.  相似文献   

18.
宴金旭  叶肇恒  郑逸  史丙新 《地震工程学报》2020,42(4):1019-1023,1034
根据四川荣县M_S4.7、M_S4.3、M_S4.9地震现场灾害调查资料,分析房屋震害特征和人员伤亡情况,结果表明震区房屋破坏类型主要为砖混结构、砖木结构和土木结构,其中砖木结构和土木结构受损比较严重,人员伤亡主要由房屋损坏导致;造成此现象的原因主要是该地区房屋建造年代久远,房屋结构不合理、抗震性能差,短时间地震频发造成震害累积,再加上民众防震减灾意识薄弱等。  相似文献   

19.
孟令媛  史保平  刘杰 《地震学报》2013,35(3):351-368
2010年9月3日16时35分46秒新西兰南岛Greendale附近发生了MW7.0地震, 震源深度约10.0 km. 2011年2月21日新西兰南岛又发生了MW6.1地震, 为2010年MW7.0主震后最大的一次余震, 震源深度约5.0 km, 发震断层为Christchurch南约9 km一条近东西走向逆冲的隐伏断层, 该地震造成Christchurch城内多处建筑物严重损毁. 本文分析了2010年新西兰地震事件MW7.0主震与MW6.1余震强地面运动的特征. 新西兰MW6.1余震近场强地面运动整体高于MW7.0主震. 将主震和余震的强震观测记录分别与新一代衰减关系(NGA)进行对比, 发现余震强震观测数据整体高于其震级对应的NGA. 分别选取距离主震和余震震中最近且强震观测记录最高的两个台站(GDLC台站和HVSC台站)作为参照台站, 建立动态复合震源模型(DCSM)及有限断层随机振动模型(SFFM)进行强地面运动的模拟计算, 分析两种模型的模拟结果并对比二者的优势及局限, 以便在未来工作中更好地通过模型计算强地面运动特征, 实现区域化特征快速、 实时分析及局部重点、 细致分析相结合的目标.   相似文献   

20.
利用高分辨光学影像获取的同震水平位移场资料联合远场波形数据反演获得了2013年巴基斯坦俾路支MW7.7地震的震源过程模型.结果显示这是发生在具有弧形铲状几何形态的Hoshab断层上的一次左旋走滑为主要运动特征的强烈地震事件.推断这种具有罕见运动模式的强烈地震是斜向应力场与特殊的断层几何形态共同作用的结果.研究工作中采用大数据量均匀分布的同震位移资料参与反演计算,结果表明这种以完整图像的形式使用位移场资料的方式可以克服资料可能存在的系统误差获得可信的结果.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号