首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
The spatial-temporal evolution of seismicity is examined, during the initial impoundment of Pournari reservoir located on Arachthos River (Western Greece), as well as for the next 30 years. The results show that, despite the relatively moderate-to-high seismicity from west to east, there is no remarkable earthquake in the vicinity before the first reservoir impoundment. Immediately after the impoundment (January 1981), and during the first 4 months, a considerable number of low-magnitude seismic events were recorded in the broader area of the dam. Moreover, two independent major events occurred on March 10, 1981 (M L ?=?5.6) and April 10, 1981 (M L ?=?4.7) with focal depths 13 and 10 km, respectively. The detailed analysis of the two corresponding aftershock sequences shows that they present different behaviors (e.g., larger b-value and lower magnitude of the main aftershock) than that of other aftershock sequences in Greece. This seismicity is probably due to triggering, via the water loading mechanism and the undrained response due to a flysch appearance on the reservoir basement. The activation of the thrust fault may be attributed to the bulging of evaporites that characterize the disordered structure of W. Greece, via possible water intake. The detailed processing of the recorded seismicity during the period 1982–2010, in comparison with the variations of Pournari Dam water level, shows an increase of shallow seismicity (h?≤?5 km) in the vicinity of the reservoir up to a 10-km distance—in contrast to the initial period, characterized by a number of deeper events due to the background response change from undrained to drained status.  相似文献   

2.
In order to analyze observed seismicity in central Japan and Venezuela, we applied a new method to identify semi-periodic sequences in the occurrence times of large earthquakes, which allows for the presence of multiple periodic sequences and/or events not belonging to any sequence in the time series. We also explored a scheme for diminishing the effects of a sharp cutoff magnitude threshold in selecting the events to analyze. A main four-event sequence with probability P c  = 0.991 of not having occurred by chance was identified for earthquakes with M ≥ 8.0 in central Japan. Venezuela is divided, from West to East, into four regions; for each of these, the magnitude ranges and identified sequences are as follows. Region 1: M ≥ 6.0, a six-event sequence with P c  = 0.923, and a four-event sequence with P c  = 0.706. Region 2: M ≥ 5.6, a five-event sequence with P c  = 0.942. Region 3: M ≥ 5.6, a four-event sequence with P c  = 0.882. Region 4: M ≥ 6.0, a five-event sequence with P c  = 0.891. Forecasts are made and evaluated for all identified sequences having four or more events and probabilities ≥0.5. The last event of all these sequences was satisfactorily aftcast by previous events. Whether the identified sequences do, in fact, correspond to physical processes resulting in semi-periodic seismicity is, of course, an open question; but the forecasts, properly used, may be useful as a factor in seismic hazard estimation.  相似文献   

3.
A straightforward Bayesian statistic is applied in five broad seismogenic source zones of the northwest frontier of the Himalayas to estimate the earthquake hazard parameters (maximum regional magnitude M max, β value of G–R relationship and seismic activity rate or intensity λ). For this purpose, a reliable earthquake catalogue which is homogeneous for M W ≥ 5.0 and complete during the period 1900 to 2010 is compiled. The Hindukush–Pamir Himalaya zone has been further divided into two seismic zones of shallow (h ≤ 70 km) and intermediate depth (h > 70 km) according to the variation of seismicity with depth in the subduction zone. The estimated earthquake hazard parameters by Bayesian approach are more stable and reliable with low standard deviations than other approaches, but the technique is more time consuming. In this study, quantiles of functions of distributions of true and apparent magnitudes for future time intervals of 5, 10, 20, 50 and 100 years are calculated with confidence limits for probability levels of 50, 70 and 90 % in all seismogenic source zones. The zones of estimated M max greater than 8.0 are related to the Sulaiman–Kirthar ranges, Hindukush–Pamir Himalaya and Himalayan Frontal Thrusts belt; suggesting more seismically hazardous regions in the examined area. The lowest value of M max (6.44) has been calculated in Northern-Pakistan and Hazara syntaxis zone which have estimated lowest activity rate 0.0023 events/day as compared to other zones. The Himalayan Frontal Thrusts belt exhibits higher earthquake magnitude (8.01) in next 100-years with 90 % probability level as compared to other zones, which reveals that this zone is more vulnerable to occurrence of a great earthquake. The obtained results in this study are directly useful for the probabilistic seismic hazard assessment in the examined region of Himalaya.  相似文献   

4.
Spain is a low-to-moderate seismicity area with relatively low seismic hazard. However, several strong shallow earthquakes have shaken the country causing casualties and extensive damage. Regional seismicity is monitored and surveyed by means of the Spanish National Seismic Network, maintenance and control of which are entrusted to the Instituto Geográfico Nacional. This array currently comprises 120 seismic stations distributed throughout Spanish territory (mainland and islands). Basically, we are interested in checking the noise conditions, reliability, and seismic detection capability of the Spanish network by analyzing the background noise level affecting the array stations, errors in hypocentral location, and detection threshold, which provides knowledge about network performance. It also enables testing of the suitability of the velocity model used in the routine process of earthquake location. To perform this study we use a method that relies on P and S wave travel times, which are computed by simulation of seismic rays from virtual seismic sources placed at the nodes of a regular grid covering the study area. Given the characteristics of the seismicity of Spain, we drew maps for M L magnitudes 2.0, 2.5, and 3.0, at a focal depth of 10 km and a confidence level 95 %. The results relate to the number of stations involved in the hypocentral location process, how these stations are distributed spatially, and the uncertainties of focal data (errors in origin time, longitude, latitude, and depth). To assess the extent to which principal seismogenic areas are well monitored by the network, we estimated the average error in the location of a seismic source from the semiaxes of the ellipsoid of confidence by calculating the radius of the equivalent sphere. Finally, the detection threshold was determined as the magnitude of the smallest seismic event detected at least by four stations. The northwest of the peninsula, the Pyrenees, especially the westernmost segment, the Betic Cordillera, and Tenerife Island are the best-monitored zones. Origin time and focal depth are data that are far from being constrained by regional events. The two Iberian areas with moderate seismicity and the highest seismic hazard, the Pyrenees and Betic Cordillera, and the northwestern quadrant of the peninsula, are the areas wherein the focus of an earthquake is determined with an approximate error of 3 km. For M L 2.5 and M L 3.0 this error is common for almost the whole peninsula and the Canary Islands. In general, errors in epicenter latitude and longitude are small for near-surface earthquakes, increasing gradually as the depth increases, but remaining close to 5 km even at a depth of 60 km. The hypocentral depth seems to be well constrained to a depth of 40 km beneath the zones with the highest density of stations, with an error of less than 5 km. The M L magnitude detection threshold of the network is approximately 2.0 for most of Spain and still less, almost 1.0, for the western sector of the Pyrenean region and the Canary Islands.  相似文献   

5.
The paper describes a temporary seismic project aimed at developing the national database of natural seismic activity for seismic hazard assessment, officially called “Monitoring of Seismic Hazard of Territory of Poland” (MSHTP). Due to low seismicity of Poland, the project was focused on events of magnitude range 1–3 in selected regions in order to maximize the chance of recording any natural event. The project used mobile seismic stations and was divided into two stages.Five-year measurements brought over one hundred natural seismic events of magnitudes ML range 0.5–3.8. Most of them were located in the Podhale region in the Carpathians. Together with previously recorded events this made it possible to conduct a preliminary study on ground motion prediction equation for this region. Only one natural event, of magnitude ML = 3.8, was recorded outside the Carpathians in a surprising location in central-west Poland.  相似文献   

6.
Many catalogues, agency reports and research articles have been published on seismicity of Turkey and its surrounding since 1950s. Given existing magnitude heterogeneity, erroneous information on epicentral location, event date and time, this past published data however is far from fulfilling the required standards. Paucity of a standardized format in the available catalogues have reinforced the need for a refined and updated catalogue for earthquake related hazard and risk studies. During this study, ~37,000 earthquakes and related parametric data were evaluated by utilizing more than 41 published studies and, an integrated database was prepared in order to analyse all parameters acquired from the catalogues and references for each event. Within the scope of this study, the epicentral locations of M ≥ 5.0 events were firstly reappraised based on the updated Active Fault Map of Turkey. An improved catalogue of 12.674 events for the period 1900–2012 was as a result recompiled for the region between 32–45N° and 23–48E° by analyzing in detail accuracy of all seismological parameters available for each event. The events consist of M ≥ 4.0 are reported in several magnitude scales (e.g. moment magnitude, Mw; surface wave magnitude, MS; body-wave magnitude mb; local magnitude ML and duration magnitude Md) whereas the maximum focal depth reaches up to 225-km. In order to provide homogenous data, the improved catalogue is unified in terms of Mw. Fore-and aftershocks were also removed from the catalogue and completeness analyses were performed both separately for various tectonic sources and as a whole for the study region of interest. Thus, the prepared homogenous and declustered catalogue consisting of 6573 events provides the basis for a reliable input to the seismic hazard assessment studies for Turkey and its surrounding areas.  相似文献   

7.
A reliable and homogenized earthquake catalogue is essential for seismic hazard assessment in any area. This article describes the compilation and processing of an updated earthquake catalogue for Pakistan. The earthquake catalogue compiled in this study for the region (quadrangle bounded by the geographical limits 40–83° N and 20–40° E) includes 36,563 earthquake events, which are reported as 4.0–8.3 moment magnitude (MW) and span from 25 AD to 2016. Relationships are developed between the moment magnitude and body, and surface wave magnitude scales to unify the catalogue in terms of magnitude MW. The catalogue includes earthquakes from Pakistan and neighbouring countries to minimize the effects of geopolitical boundaries in seismic hazard assessment studies. Earthquakes reported by local and international agencies as well as individual catalogues are included. The proposed catalogue is further used to obtain magnitude of completeness after removal of dependent events by using four different algorithms. Finally, seismicity parameters of the seismic sources are reported, and recommendations are made for seismic hazard assessment studies in Pakistan.  相似文献   

8.
The Canterbury earthquake sequence beginning with the 2010 M W 7.2 Darfield earthquake is one of the most notable and well-recorded crustal earthquake sequences in a low-strain-rate region worldwide and as such provides a unique opportunity to better understand earthquake source physics and ground motion generation in such a tectonic setting. Ground motions during this sequence ranged up to extreme values of 2.2 g, recorded during the February 2011 M W 6.2 event beneath the city of Christchurch. A better understanding of the seismic source signature of this sequence, in particular the stress release and its scaling with earthquake size, is crucial for future ground motion prediction and hazard assessment in Canterbury, but also of high interest for other low-to-moderate seismicity regions where high-quality records of large earthquakes are lacking. Here we present a source parameter study of more than 200 events of the Canterbury sequence, covering the magnitude range M W 3–7.2. Source spectra were derived using a generalized spectral inversion technique and found to be well characterized by the ω ?2 source model. We find that stress drops range between 1 and 20 MPa with a median value of 5 MPa, which is a factor of 5 larger than the median stress drop previously estimated with the same method for crustal earthquakes in much more seismically active Japan. Stress drop scaling with earthquake size is nearly self-similar, and we identify lateral variations throughout Canterbury, in particular high stress drops at the fault edges of the two major events, the M W 7.2 Darfield and M W 6.2 Christchurch earthquakes.  相似文献   

9.
The source mechanism of the ML 4.0 25 April 2016 Lacq earthquake (Aquitaine Basin, South-West France) is analyzed from the available public data and discussed with respect to the geometry of the nearby Lacq gas field. It is one of the biggest earthquakes in the area in the past few decades of gas extraction and the biggest after the end of gas exploitation in 2013. The routinely obtained location shows its hypocenter position inside the gas reservoir. We first analyze its focal mechanism through regional broad-band seismograms recorded in a radius of about 50 km epicentral distances and obtain EW running normal faulting above the reservoir. While the solution is stable using regional data only, we observe a large discrepancy between the recorded data on nearby station URDF and the forward modeling up to 1 Hz. We then look for the best epicenter position through performing wave propagation simulations and constraining the potential source area by the peak ground velocity (PGV). The resulting epicentral position is a few to several km away to the north or south direction with respect to station URDF such that the simulated particle motions are consistent with the observation. The initial motion of the seismograms shows that the epicenter position in the north from URDF is preferable, indicating the north-east of the Lacq reservoir. This study is an application of full waveform simulations and characterization of near-field ground motion in terms of an engineering factor such as PGV. The finally obtained solution gives a moment magnitude of Mw 3.9 and the best focal depth of 4 km, which corresponds to the crust above the reservoir rather than its interior. This position is consistent with the tendency of Coulomb stress change due to a compaction at 5 km depth in the crust. Therefore, this earthquake can be interpreted as a relaxation of the shallow crust due to a deeper gas reservoir compaction so that the occurrence of similar events cannot be excluded in the near future. It would be necessary to continue monitoring such local induced seismicity in order to better understand the reservoir/overburden behavior and better assess the local seismic hazard even after the end of gas exploitation.  相似文献   

10.
On the 27 June 2015, at 15:34:03 UTC, a moderate-sized earthquake of M w 5.0 occurred in the Gulf of Aqaba. Using teleseismic P waves, the focal mechanism of the mainshock was investigated by two techniques. The first technique used the polarities of the first P wave onsets, and the second technique was based on the normalized waveform modeling technique. The results showed that the extension stress has a NE orientation with a shallow southward plunge while the compression stress has a NW trend with a nearly shallow westward plunge, obtaining a strike-slip mechanism. This result agrees well with the typical consequence of crustal deformation resulting from the ongoing extensional to shear stress regime in the Gulf of Aqaba (NE-SW extension and NW-SE compression). The grid search method over a range of focal depths indicates an optimum solution at 15 ± 1 km. To identify the causative fault plane, the aftershock hypocenters were relocated using the local waveform data and the double-difference technique. Considering the fault trends, the spatial distribution of relocated aftershocks demarcated a NS-oriented causative fault, in consistence with one of the nodal planes of the focal mechanism solution, emphasizing the dominant stress regime in the region. Following the Brune model, the estimates of source parameters exhibited fault lengths of 0.29 ≤ L ≤ 2.48 km, moment magnitudes of 3.0 ≤ M w ≤ 5.0, and stress drops of 0.14 ≤ Δσ < 1.14 MPa, indicating a source scaling similar to the tectonic earthquakes related to plate boundaries.  相似文献   

11.
In this study data and results of a high-resolution experiment in Cephalonia (Greece) regarding empirical basin effects are presented. A total of 59 velocimeters and 17 accelerometers were deployed in the basin of Argostoli Cephalonia (Greece), for a period of 7 months (September 2011–April 2012). Due to high seismicity of the western Greece and surrounding area this array recorded thousands of local, regional and global events. Data used in this work come from a selection of 162 regional and local earthquakes, 3 km ≤ R ≤ 600 km, with magnitude range, 1.0 ≤ M ≤ 5.2. Based on high signal-to-noise ratio recordings and two selected reference stations, variation of several intensity measures (PGA, PGV, Arias Intensity, Cumulative Absolute Velocity), significant duration, HVSR and SSR of ground motion recordings on soil sites within the basin is carefully examined for a range of frequencies of engineering interest. Comparison of results with a detailed 2D geologic model shows a good consistency both in amplification and frequency domain. Influence of “reference” site on ground motion variation of soil sites is also discussed in light of our results. Finally, it is suggested that 2D or/and 3D theoretical modeling should be performed given the availability of geological and geophysical parameters to define a realistic model of the basin. Results of this study can undoubtedly serve in model validation and improvement of ground motion simulation tools.  相似文献   

12.
The recent seismicity catalogue of metropolitan France Sismicité Instrumentale de l’Hexagone (SI-Hex) covers the period 1962–2009. It is the outcome of a multipartner project conducted between 2010 and 2013. In this catalogue, moment magnitudes (M w) are mainly determined from short-period velocimetric records, the same records as those used by the Laboratoire de Détection Géophysique (LDG) for issuing local magnitudes (M L) since 1962. Two distinct procedures are used, whether M L-LDG is larger or smaller than 4. For M L-LDG >4, M w is computed by fitting the coda-wave amplitude on the raw records. Station corrections and regional properties of coda-wave attenuation are taken into account in the computations. For M L-LDG ≤4, M w is converted from M L-LDG through linear regression rules. In the smallest magnitude range M L-LDG <3.1, special attention is paid to the non-unity slope of the relation between the local magnitudes and M w. All M w determined during the SI-Hex project is calibrated according to reference M w of recent events. As for some small events, no M L-LDG has been determined; local magnitudes issued by other French networks or LDG duration magnitude (M D) are first converted into M L-LDG before applying the conversion rules. This paper shows how the different sources of information and the different magnitude ranges are combined in order to determine an unbiased set of M w for the whole 38,027 events of the catalogue.  相似文献   

13.
Stress drop estimates of moderate-magnitude earthquakes in the Umbria–Marche region, in the northern Apennines, exhibit a large scatter. For the two M w 5.7 and 6.0 main shocks of 26 September 1997 near Colfiorito, several papers resulted in stress drop estimates of 20 MPa, but values as low as 2–3 MPa were proposed as well. Also for the largest aftershocks (M w > 4), estimates spread from < 1 MPa up to values ten times larger. We have critically revisited methods and data used in the literature. We have specifically faced the trade-off between source and propagation effects, as we believe that it is responsible for a part of the large scatter. To keep this trade-off under control, we have applied a methodology that combines the best fit of both source spectra after Empirical Green’s Function (EGF) deconvolution and observed ground motion spectra, finding that the results of the two different data sets converge independently at the same solution. We have used ground motions observed in the Colfiorito basin, where an accelerograph and a co-located seismological broad-band station recorded three clusters of earthquakes in a broad magnitude interval (1.7 ≤ M w ≤ 6.0). We have found that the mainshock–aftershock sequences result in stress drops of 2–5 MPa at M w ≥ 5.6, with an average tendency to decrease at smaller magnitudes where stress drop variability increases. These findings confirm the source scaling recently assessed through Empirical Green’s Function deconvolution for another well-monitored seismic sequence of normal-faulting earthquakes, which struck the city of L’Aquila in the central Apennines in April 2009. The similar scaling law of the two areas suggests common mechanisms of stress release for the shallow normal faults in the Apennines. The propensity of smaller earthquakes to increase in variability, with a tendency toward smaller stress drops, may reflect an effect of fault strength heterogeneities for smaller size ruptures.  相似文献   

14.
We present a new set of Ground Motion Prediction Equations (GMPEs) for horizontal Peak Ground Acceleration, Peak Ground Velocity, and 5 % damped pseudo-spectral acceleration (PSA), developed for the San Jacinto Fault Zone (SJFZ) area. Besides using these equations to quantify seismic shaking in the area, the results allow us to examine the physics and local properties controlling the observed ground motions. The analyzed dataset includes ~30,000 observations from ~800 events spanning a magnitude range of 1.5 < M < 6.0 and recorded by up to 140 stations at epicentral distances ranging from essentially zero to 150 km. The local GMPE is developed for the SJFZ by applying classical regression techniques with predictive variables that include first distance and magnitude, and then site characteristics, rupture directivity, and fault zone amplification. The significance of these effects is determined by measuring the uncertainty-reduction of the GMPE due to each factor. The results show that, in contrast to many regional studies, traditional site characteristic has a relatively minor effect on peak amplitudes in our study area. However, rupture directivity is a significant factor controlling the amplitudes of ground motion even for small events. The dense seismic network and newly developed directivity tool enable us to extract efficiently directivity effects with statistical significance, using the ground-motion dataset during the regression analysis process. The obtained rupture directivities are consistent with the main focal mechanism orientations and surface trace orientations, known from other studies, and predictions for bimaterial ruptures in the trifurcation area of the SJFZ. Fault zone amplification is a second important factor, showing strong impact on the peak ground motion values, with increasing role for the lower frequency range (<10 Hz) examined in the 5 % damped PSA values. We also observe signatures of large amplitude-variances, which indicate additional source-related control on the distribution of amplitudes (besides rupture directivity) for aftershocks close in time and location to the M L 5.1 earthquake of March 2013. Using the full set of records we present the most complete set of GMPEs for the SJFZ area, including a higher-amplitude prediction for regions in the direction of rupture.  相似文献   

15.
Immediately following the M S7.0 Lushan earthquake on April 20, 2013, using high-pass and low-pass filtering on the digital seismic stations in the Shanxi Province, located about 870–1,452 km from the earthquake epicenter, we detected some earthquakes at a time corresponding to the first arrival of surface waves in high-pass filtering waveform. The earthquakes were especially noticed at stations in Youyu (YUY), Shanzizao (SZZ), Shanghuangzhuang (SHZ), and Zhenchuan (ZCH), which are located in a volcanic region in the Shanxi Province,but they were not listed in the Shanxi seismic observation report. These earthquakes occurred 4–50 min after the passage of the maximum amplitude Rayleigh wave, and the periods of the surface waves were mainly between 15 and 20 s following. The Coulomb stresses caused by the Rayleigh waves that acted on the four stations was about 0.001 MPa, which is a little lower than the threshold value of dynamic triggering, therefore, we may conclude that the Datong volcanic region is more sensitive to the Coulomb stress change. To verify, if the similar phenomena are widespread, we used the same filtering to observe contrastively continuous waveform data before, and 5 h after, the M S7.0 Lushan earthquake and M S9.0 Tohoku earthquake in 2011. The results show that the similar phenomena occur before the earthquakes, but the seismicity rates after the earthquakes are remarkably increased. Since these weak earthquakes are quite small, it is hard to get clear phase arrival time from three or more stations to locate them. In addition, the travel time differences between P waves and S waves (S–P) are all less than 4 s, that means the events should occur in 34 km around the stations in the volcanic region. The stress of initial dynamic triggering of the M S9.0 Tohoku earthquake was about 0.09 MPa, which is much higher than the threshold value of dynamic triggering stress. The earthquakes after the M S9.0 Tohoku earthquake are related to dynamic triggering stress, but the events before the earthquake cannot be linked to seismic events, but may be related to the background seismicity or from other kinds of local sources, such as anthropogenic sources (i.e., explosions). Using two teleseismic filtering, the small background earthquakes in the Datong volcanic region occur frequently, thus we postulate that previous catalog does not apply bandpass filter to pick out the weak earthquakes, and some of the observed weak events were not triggered by changes in the dynamic stress field.  相似文献   

16.
The potential and limits of monitoring induced seismicity by surface-based mini arrays was evaluated for the hydraulic stimulation of the Basel Deep Heat Mining Project. This project aimed at the exploitation of geothermal heat from a depth of about 4,630?m. As reference for our results, a network of borehole stations by Geothermal Explorers Ltd. provided ground truth information. We utilized array processing, sonogram event detection and outlier-resistant, graphical jackknife location procedures to compensate for the decrease in signal-to-noise ratio at the surface. We could correctly resolve the NNW?CSSE striking fault plane by relative master event locations. Statistical analysis of our catalog data resulted in M L 0.36 as completeness magnitude, but with significant day-to-night dependency. To compare to the performance of borehole data with M W 0.9 as completeness magnitude, we applied two methods for converting M L to M W which raised our M C to M W in the range of 0.99?C1.13. Further, the b value for the duration of our measurement was calculated to 1.14 (related to M L), respectively 1.66 (related to M W), but changes over time could not be resolved from the error bars.  相似文献   

17.
In this study, we aim to improve the scaling between the moment magnitude (M W), local magnitude (M L), and the duration magnitude (M D) for 162 earthquakes in Shillong-Mikir plateau and its adjoining region of northeast India by extending the M W estimates to lower magnitude earthquakes using spectral analysis of P-waves from vertical component seismograms. The M W-M L and M W-M D relationships are determined by linear regression analysis. It is found that, M W values can be considered consistent with M L and M D, within 0.1 and 0.2 magnitude units respectively, in 90 % of the cases. The scaling relationships investigated comply well with similar relationships in other regions in the world and in other seismogenic areas in the northeast India region.  相似文献   

18.
Recent seismic activity in southern Lebanon is of particular interest since the tectonic framework of this region is poorly understood. In addition, seismicity in this region is very infrequent compared with the Roum fault to the east, which is seismically active. Between early 2008 and the end of 2010, intense seismic activity occurred in the area. This was manifested by several swarm-like sequences and continuous trickling seismicity over many days, amounting in total to more than 900 earthquakes in the magnitude range of 0.5?≤?M d?≤?5.2. The region of activity extended in a 40-km long zone mainly in a N-S direction and was located about 10 km west of the Roum fault. The largest earthquake, with a duration magnitude of M d?=?5.2, occurred on February 15, 2008, and was located at 33.327° N, 35.406° E at a depth of 3 km. The mean-horizontal peak ground acceleration observed at two nearby accelerometers exceeded 0.05 g, where the strongest peak horizontal acceleration was 55 cm/s2 at about 20 km SE of the epicenter. Application of the HypoDD algorithm yielded a pronounced N-S zone, parallel to the Roum fault, which was not known to be seismically active. Focal mechanism, based on full waveform inversion and the directivity effect of the strongest earthquake, suggests left-lateral strike-slip NNW-SSE faulting that crosses the NE-SW traverse faults in southern Lebanon.  相似文献   

19.
An attempt has been made to examine an empirical relationship between moment magnitude (M W) and local magnitude (M L) for the earthquakes in the northeast Indian region. Some 364 earthquakes that were recorded during 1950–2009 are used in this study. Focal mechanism solutions of these earthquakes include 189 Harvard-CMT solutions (M W?≥?4.0) for the period 1976–2009, 61 published solutions and 114 solutions obtained for the local earthquakes (2.0?≤?M L?≤?5.0) recorded by a 27-station permanent broadband network during 2001–2009 in the region. The M W–M L relationships in seven selected zones of the region are determined by linear regression analysis. A significant variation in the M W–M L relationship and its zone specific dependence are reported here. It is found that M W is equivalent to M L with an average uncertainty of about 0.13 magnitude units. A single relationship is, however, not adequate to scale the entire northeast Indian region because of heterogeneous geologic and geotectonic environments where earthquakes occur due to collisions, subduction and complex intra-plate tectonics.  相似文献   

20.
Based on Center of Orbit Determination in Europe (CODE) global ionospheric map (GIM) data, a statistical analysis of local total electron content (TEC) anomalies before 121 low-depth (D ≤ 100 km) strong (M w ≥ 7.0) earthquakes has been made using the sliding median differential calculation method combining with a new approach of image processing technique. The results show that significant local TEC anomalies could be observed 0–6 days before 80 earthquakes, about 66.1% out of the total. The positive anomalies occur more often than negative ones. For 26 cases, both positive and negative anomalies are observed before the shock. The pre-earthquake TEC anomalies show local time recurrence for 38 earthquakes, which occur around the same local time on different days. The local time distribution of the pre-earthquake TEC anomalies mainly concentrates between 19 and 06 LT, roughly from the sunset to sunrise. Most of the pre-earthquake TEC anomalies do not locate above the epicenter but shift to the south. The pre-earthquake TEC anomalies could be extracted near the magnetic conjugate point of the epicenter for 40 events, which is 50% out of the total 80 cases with significant local TEC anomalies. In general, the signs of the anomalies around epicenter and its conjugate point are the same, but the abnormal magnitude and lasting time are not.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号