首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 156 毫秒
1.
依据山前洪积扇顶部的扇形地形和向下游方向逐渐降低的地形特征,文中首先分析了断层面直立、向河流上游倾斜、向河流下游倾斜3种条件下左旋走滑断层错动在洪积扇顶部形成的断层陡坎的坡向和高度变化。其次,分析了左旋逆走滑断层、左旋正走滑断层在不同断层倾向条件下,断层错动在洪积扇顶部形成的断层陡坎的坡向和高度变化。利用无人机实测地形数据、谷歌卫星影像,结合野外地质地貌调查,发现新疆塔城盆地东缘NE-SW走向的冬别列克断裂近垂直穿过了自SE-NW发育的阿合别斗河。阿合别斗河处洪积扇的中轴线为NW向,坡向朝N,断层活动使其顶部发育了高约5.2m、坡向SE的反向断层陡坎。而在河床左、右两岸各1km之外的山前洪积扇上,断层陡坎为坡向NW的正向断层陡坎,坎高1~5m不等。阿合别斗河左岸T2、右岸T4与左、右两岸T5阶地的左旋水平位错量分别为(10.1±0.2) m、(10.6±0.7) m、(29.1±0.2) m、(20.0±0.7) m,垂直位错量分别为(1.5±0.1) m、(3.6±0.3) m、(4.7±0.2) m、(5.2±0.1) m。野外调查发现2处断层露头,断层面均倾向SE。根据阿合别斗河附近的断错地貌和走滑断层断错地貌模型,认为冬别列克断层在地貌面S1形成后为左旋逆走滑性质,T5阶地面形成后断层的性质转变为左旋正走滑并多次活动,形成了自SW-NE连续分布的正向断层陡坎—无陡坎—反向断层陡坎—无陡坎—正向断层陡坎的地貌现象。  相似文献   

2.
博罗可努-阿齐克库都克断裂(博-阿断裂)是中天山与北天山的板块会聚边界,它NW向斜切天山山脉,是一条继承性的右旋走滑活动断层。研究其活动性质、限定其滑动速率有助于理解天山地区晚第四纪构造变形模式、应变速率分配情况及评估区域地震危险性。文中通过卫星遥感影像解译及野外考察,基于地貌面高程、水系密度和切割深度等,将精河东南的冲洪积扇分为4期,由老到新分别命名为Fan1、Fan2、Fan3和Fan4。利用无人机航拍获取断裂附近的高精度影像,并对冲洪积扇上发育的冲沟、阶地陡坎等进行构造地貌解译,发现Fan1、Fan2和Fan3 3期冲洪积扇上发育右旋位错冲沟及断层陡坎。其中,Fan2b、Fan3a和Fan3b上的冲沟最小右旋位错约6m,最大位错分别为(414±10) m、(91±5) m和(39±1) m; Fan2b与Fan3a分界的地貌陡坎被右旋位错(212±11) m。结合前人在天山北麓得到的阶地或冲洪积扇的堆积年龄,并与古里雅冰芯气候曲线进行对比,推测Fan2b、Fan3a和Fan3b 3期冲洪积扇的下切年龄分别为56~64ka、35~41ka和10~14ka。博-阿断裂自冲洪积扇Fan2b、Fan3a和Fan3b形成以来的滑动速率分别为3. 3~3. 7mm/a、2. 2~2. 6mm/a和2. 7~3. 9mm/a,利用蒙特卡洛模拟方法拟合得到晚更新世以来其平均右旋走滑速率为(3. 1±0. 3) mm/a。  相似文献   

3.
榆木山北缘断裂的构造地貌特征与断层活动性   总被引:6,自引:0,他引:6  
构造地貌能反映断裂的结构变形特征和断层的活动强度。便如断层陡坎的高度、长度和坡度以及断层陡坎的连续程度。在这篇文章中,讨论了断层段内每个段落断层陡坎的F(C),F(D),F(LR),F(SR)值的特征。在这篇文章结尾,还讨论了冲洪积扇特征对以活动强度的反映。从地貌统计结果来看,发现在榆木山断裂的中间部位冲洪积扇体坡度最大,从中间向两侧中洪积扇扇体坡度呈减弱趋势。文中还给出了断层陡无坎变形的测量结果,冲洪积扇扇顶热释光年龄和断层滑动速度。从分析结果来看,榆木山北缘断裂可以细分为三段,东段(梨园小口子-排路口)、中段(排路口-芦泉河)和西段(芦泉河-李家山子)。  相似文献   

4.
乌苏南断裂组发育于北天山山前的独山子逆断裂—背斜带(第3排)和西湖隆起(第4排)之间,在卫星影像显示为4~5排近平行断层陡坎组成,断层晚第四纪以来断层活动明显,沿断层断错山前冲洪积扇、冲沟和水系,形成断续分布的线性陡坎地貌,开挖地质探槽显示乌苏南断层组为高倾角逆走滑型断裂。依据断层断错地貌面年代,估算断层晚更新世以来的垂直活动速率约0.125 mm/a,右旋走滑活动速率为1.25±0.02 mm/a。根据乌苏南断层带所处的位置及构造特性,推断该断裂很可能是天山山前第3排背斜带与第4排背斜带之间的过度转换断层。  相似文献   

5.
褶皱陡坎是褶皱变形过程中形成的地貌陡坎,是近期发现的一种不同于断层陡坎的构造作用形成的陡坎状地貌。在缺少地震反射剖面等深部资料时,利用褶皱陡坎可对活动褶皱的变形特征和生长演化历史进行限定,但迄今为止有关研究较少。位于帕米尔-南天山前陆地区的明尧勒背斜为第四纪活动的滑脱褶皱。在背斜南翼的河流阶地上发育了一系列褶皱陡坎:在T2和T3b阶地上,褶皱陡坎的高度/宽度/坡度分别为16m/40m/25°和20m/50m/26°,陡坎位置与下伏基岩中向斜枢纽位置对应。通过对这些褶皱陡坎的分析,得出:1)这些褶皱陡坎是滑脱褶皱通过膝折带迁移机制形成的。2)褶皱陡坎形成初期,陡坎高度、宽度和坡度逐渐增大;当陡坎宽度达到枢纽带宽度2倍时,陡坎坡度将达到最大值;之后尽管陡坎高度和宽度逐渐增大,其坡度将保持恒定。3)褶皱陡坎吸收的缩短增量与陡坎高度和下伏地层倾角间存在定量几何关系。根据T2阶地上褶皱陡坎的高度约16m和暴露年龄约8ka,估算T2阶地面暴露以来明尧勒背斜南翼的缩短速率为~1.3mm/a。在上述分析基础上,还对比总结了滑脱褶皱陡坎和断弯褶皱陡坎的异同点。  相似文献   

6.
华山山前断裂中段晚第四纪活动的地貌表现及响应   总被引:2,自引:1,他引:1  
调查了华山山前断裂中段(石堤峪-杜峪)晚更新世以来,尤其是全新世以来的断层构造地貌,讨论了它们的成因、特点及对断裂活动的响应关系。断层构造地貌主要包括:断层三角面、断层陡坎、洪积阶地、埋藏型洪积扇以及冲沟裂点。对各大沟峪峪口的洪积阶地进行了大比例尺微地貌测量,并在部分沟峪两侧沿断层崖陡坎及冲沟沟床布置了测线。结合T1、T2级洪积阶地位错测量结果及其14C年龄计算得到,华山山前断裂中段6000a-2000aB.P.的垂直滑动速率为1.485mm/a;2000aB.P.以来的垂直滑动速率为3.73mm/a。最后结合野外调查与理论认识,建立了正断层作用下洪积阶地与埋藏型洪积扇的演化模式。本研究结果支持华山山前断裂是1556年华县814级地震发震构造的观点。  相似文献   

7.
发育在帕米尔弧形推覆构造带最前缘的木什活动背斜是一南缓北陡的第四纪滑脱褶皱,背斜的最小地壳缩短量为0.7km,构造隆升幅度可达1.5km.木什背斜北翼逆断层由一系列坡向北的反向断层陡坎组成,不同断坎间垂直位移分布呈现此消彼长的特征,不论是整个北翼逆断层西段还是单条断坎,其垂直位移均呈东高西低的不对称分布,位移梯度东高西...  相似文献   

8.
在详细调查盐水沟以东秋里塔格背斜带地质、地貌特征的基础上,结合地震反射剖面揭示的深部构造形态,讨论了背斜区地表断层的分布特征、活动性及形成机制。盐水沟以东的秋里塔格背斜带包括库车塔吾背斜和东秋里塔格背斜。库车塔吾背斜核部断层是发育于古近系盐膏层中的滑脱断层向地表的延伸,在晚更新世仍持续活动。库车塔吾背斜北翼断层为受局部挤压应力控制而产生的褶皱调节断层,发育于北翼山前活动枢纽内,成组近平行出现,走向上展布不连续;探槽开挖结果表明,该断层全新世有过断错地表的古地震事件。发育于东秋里塔格背斜南翼靠近核部的博斯坦断层为较大规模的低倾角逆冲断层,向下可能与控制表层背斜生长的断坡相连。东秋里塔格背斜南翼断层是发育于断展褶皱陡倾前翼的剪切逆冲断层,亦平行成组出现,断续分布,在哥库洛克一带断层错断了全新世洪积扇。活动褶皱及其褶皱相关断层均为深部断层滑动经过复杂的褶皱变形传播到近地表的表现,是深部断层活动的指示构造。褶皱调节断层仅是褶皱过程中产生的局部变形,与控制褶皱生长的深部断层仅存在间接的关系。此类断层的滑动位移、速率等不代表深部控制背斜生长断层的运动学参数,但这些次级断层部分记录了活动褶皱区的古地震事件。  相似文献   

9.
通过对伊吾断裂的实地调查,发现断裂在伊吾县城北侧的山前地带断错了晚第四纪洪积扇、T_3河流阶地,在地表形清晰的陡坎地貌,T_1阶地未见明显错动。依据探槽及天然露头揭露的剖面,认为研究区内断裂的运动方式以高角度逆冲为主。实测洪积扇上陡坎的高度在5~13 m区间内,T_3阶地的垂直高差达26 m,光释光测年结果表明研究区内T_3阶地的年龄为71~108 ka,初步估计伊吾断裂晚第四纪以来的垂直活动速率为0.24~0.37 mm/a。  相似文献   

10.
柯坪塔格山前三岔口北西发育了5级不同期次的冲洪积扇面,其中较年轻的3期完整地保留了断裂最新活动形成的陡坎.依据断错地貌面上砾石混合样品的10Be暴露年龄及差分GPS地形实测结果,计算出(20.22± 1.91) ka以来T1、T2、T3级冲洪积扇上记录的断裂垂直滑动速率分别为(0.16±0.02)、(0.17±0.02...  相似文献   

11.
卡兹克阿尔特断裂带活动特征   总被引:7,自引:0,他引:7  
尹金辉  陈杰  郑勇刚  李锰  胡军 《中国地震》2001,17(2):221-230
卡兹克阿尔特断裂带是帕米尔和天山新生代造山带间一个重要的活动构造边界,通过对其活动构造特征的详细地质调查和大比例尺填图,可将卡兹克阿尔特断裂带进一步划分为吉勒格由特断裂带、乌恰地震断裂带和木什断裂带3段.吉勒格由特断裂带的地表破裂为一系列的断层陡坎和偏转的冲积扇,经过别尔托阔依河出山口处时,切割了T1至T3堆积阶地.断裂带在T1、T2和T3阶地的断层陡坎高度分别为0.67m、3.90m和36.50m.对采自T2阶地顶部和底部的粉砂样品进行光释光测年,测定的初步结果分别为8900aBP和10500aBP,因此对T3、T2阶地以来的滑动速率估计分别约为3.5mm/a、0.8mm/a.断裂的前缘开挖的探槽揭示出全新世以来有4次古地震活动.乌恰地震带主要切割克兹勒苏河的T3阶地后缘,沿断裂带分布有大小不等的断塞塘和断层陡坎.1985年8月23日在乌恰地震带上发生Ms7.4地震,地震最大位错为1.5m.根据断层陡坎计算出断裂的滑动速率约为0.54mm/a.卡帕河的东岸探槽同样揭示出有4次古地震活动.在乌恰地震带的东端,木什断裂带地表长度约6km,由数十条左阶排列的反向断层陡坎(坡向北)组成,沿这些断坎多处可见冲沟被断错,横跨断层陡坎的探槽揭示出3次古地震活动.  相似文献   

12.
The Bolokonu-Aqikekuduke fault zone(Bo-A Fault)is the plate convergence boundary between the middle and the northern Tianshan. Bo-A Fault is an inherited right-lateral strike-slip active fault and obliquely cuts the Tianshan Mountains to the northwest. Accurately constrained fault activity and slip rate is crucial for understanding the tectonic deformation mechanism, strain rate distribution and regional seismic hazard. Based on the interpretation of satellite remote sensing images and topographic surveys, this paper divides the alluvial fans in the southeast of Jinghe River into four phases, Fan1, Fan2, Fan3 and Fan4 by geomorphological elevation, water density, depth of cut, etc. This paper interprets gullies and terrace scarps by high-resolution LiDAR topographic data. Right-laterally offset gullies, fault scarps and terrace scarps are distributed in Fan1, Fan2b and Fan3. We have identified a total of 30 right-laterally offset gullies and terrace scarps. Minimum right-lateral displacement is about 6m and the maximum right-lateral displacements are(414±10)m, (91±5)m and(39±1)m on Fan2b, Fan3a and Fan3b. The landform scarp dividing Fan2b and Fan3a is offset right-laterally by (212±11)m. Combining the work done by the predecessors in the northern foothills of the Tianshan Mountains with Guliya ice core climate curve, this paper concludes that the undercut age of alluvial fan are 56~64ka, 35~41ka, 10~14ka in the Tianshan Mountains. The slip rate of Bo-A Fault since the formation of the Fan2b, Fan3a and Fan3b of the alluvial-proluvial fan is 3.3~3.7mm/a, 2.2~2.6mm/a and 2.7~3.9mm/a. The right-lateral strike-slip rate since the late Pleistocene is obtained to be 3.1±0.3mm/a based on high-resolution LiDAR topographic data and Monte Carlo analysis.  相似文献   

13.
As the most active intracontinental orogenic belt in the world, the Tianshan orogenic belt has complex and diverse internal structural deformation patterns, and among them, the particularly striking is the linear straight U-type valley landscapes which cut inside the mountains by multiple NW-SE and ENE-WSW strike-slip faults. Many of the modern strong earthquakes in Tianshan orogenic belt are closely related to these strike-slip faults. Therefore, it is important to elaborate the activity characteristics of these faults to understand the deformation process inside the Tianshan Mountains belt. This paper focuses on one of the NW-SE right-lateral strike-slip fault (the Kaiduhe Fault), which lies inside the southeastern Tianshan. Typical offset landforms and scarp lineaments on the western segment of the Kaiduhe Fault can be used to study the activity characteristics and strike-slip rate. In particular, the fault cuts through the late Quaternary alluvial fans and a series of river gullies were right-laterally faulted, producing dextral offsets ranging from 3 to 248m. A digital elevation model (DEM)with resolution of 0.25m was established by using multi-angle photogrammetry technique to stripe about 12km linear tectonic landforms along the Kaiduhe Fault. Geological and geomorphic mapping in DEM with 22 high-resolution dextral offset measurements reveals that the dextral offsets can be divide into four groups of 3.5m, 7.0m, 11.8m and 14.5m. It is presumed from the approximately uniformly-spaced offsets that the coseismic offset was 3~4m. In addition, the exposure age of an older alluvial fan surface was about 235.7ka by in situ 10Be terrestrial cosmogenic nuclide method. Combining the exposure ages and the maximum dextral offset of 248m, we found that the strike-slip rate of the Kaiduhe Fault is about 1mm/a. It is found by this study that the Kaiduhe Fault plays an important role in regulating SN compression deformation within Tianshan Mountains, and it should also be the main stress-strain accumulation area which has the risk of occurrence of strong earthquake.  相似文献   

14.
Influenced by the far-field effect of India-Eurasia collision, Tianshan Mountains is one of the most intensely deformed and seismically active intracontinental orogenic belts in Cenozoic. The deformation of Tianshan is not only concentrated on its south and north margins, but also on the interior of the orogen. The deformation of the interior of Tianshan is dominated by NW-trending right-lateral strike-slip faults and ENE-trending left-lateral strike-slip faults. Compared with numerous studies on the south and north margins of Tianshan, little work has been done to quantify the slip rates of faults within the Tianshan Mountains. Therefore, it is a significant approach for geologists to understand the current tectonic deformation style of Tianshan Mountains by studying the late Quaternary deformation characteristics of large fault and fold zones extending through the interior of Tianshan. In this paper, we focus on a large near EW trending fault, the Baoertu Fault (BETF) in the interior of Tianshan, which is a large fault in the eastern Tianshan area with apparent features of deformation, and a boundary fault between the central and southern Tianshan. An MS5.0 earthquake event occurred on BETF, which indicates that this fault is still active. In order to understand the kinematics and obtain the late Quaternary slip rate of BETF, we made a detailed research on its late Quaternary kinematic features based on remote sensing interpretation, drone photography, and field geological and geomorphologic survey, the results show that the BETF is of left-lateral strike-slip with thrust component in late Quaternary. In the northwestern Kumishi basin, BETF sinistrally offsets the late Pleistocene piedmont alluvial fans, forming fault scarps and generating sinistral displacement of gullies and geomorphic surfaces. In the bedrock region west of Benbutu village, BETF cuts through the bedrock and forms the trough valley. Besides, a series of drainages or rivers which cross the fault zone and date from late Pleistocene have been left-laterally offset systematically, resulting in a sinistral displacement ranging 0.93~4.53km. By constructing the digital elevation model (DEM) for the three sites of typical deformed morphologic units, we measured the heights of fault scarps and left-lateral displacements of different gullies forming in different times, and the result shows that BEFT is dominated by left-lateral strike-slip with thrust component. We realign the bended channels across the fault at BET01 site and obtain the largest displacement of 67m. And we propose that the abandon age of the deformed fan is about 120ka according to the features of the fan. Based on the offsets of channels at BET01 and the abandon age of deformed fan, we estimate the slip rate of 0.56mm/a since late Quaternary. The Tianshan Mountains is divided into several sub-blocks by large faults within the orogen. The deformation in the interior of Tianshan can be accommodated or absorbed by relative movement or rotation. The relative movement of the two sub-blocks surrounded by Boa Fault, Kaiduhe Fault and BETF is the dominant cause for the left-lateral movement of BETF. The left-lateral strike-slip with reverse component of BETF in late Quaternary not only accommodates the horizontal stain within eastern Tianshan but also absorbs some SN shortening of the crust.  相似文献   

15.
塔里木盆地新疆喀什以西部分是西南天山和帕米尔两大对冲构造系统的会聚带,关于两者变形前缘和分界的确切位置存在不同认识.在乌恰县以南的玛依卡克盆地南缘,清晰可见属于帕米尔构造带、向N或NNE逆冲的帕米尔前缘逆冲推覆体(PFT).最近野外调查在盆地北部发现了西南天山前缘的最新变形带:向南逆冲的乌拉根背斜南翼断层.断层总体近E...  相似文献   

16.
阿尔金构造系晚更新世中晚期以来的逆冲活动   总被引:5,自引:1,他引:5       下载免费PDF全文
在阿尔金构造系中,阿尔金走滑断裂具有逆冲分量。文中将阿尔金构造系的逆冲活动分为西、中、东3段描述。西段从阿依耐克至车尔臣河河口,阿尔金南缘断裂具有逆冲活动迹象,在山前发育了规模较小的逆冲断层,有较新的地貌面被错动;中段从车尔臣河河口至拉配泉一带,在阿尔金山北缘发育大规模的逆冲断层,有较新的地貌面被错动;东段从拉配泉至宽滩山,逆冲断层有2种形式,此段阿尔金北缘断裂有逆冲分量,同时在阿尔金山北缘及山前冲洪积扇上发育逆冲断裂。自晚更新世中晚期以来,中段及东段逆冲速率<2mm/a。中段西部江尕拉萨依地区自16kaBP以来逆冲速率约为0.33mm/a,中部米兰桥一带自32kaBP以来的逆冲速率约为1.42mm/a。东段最大的逆冲速率在近中部的团结乡,自约5.31kaBP以来达到约1.81mm/a,向东西两端有减小的趋势,在西部柳城子自约72.36kaBP以来的逆冲速率为0.57mm/a,而东端的红柳沟自约8.99kaBP以来仅为0.05mm/a。团结乡地区约自19kaBP以来,逆冲活动有增强的趋势  相似文献   

17.
祁连山北缘玉门-北大河断裂晚第四纪活动特征   总被引:3,自引:2,他引:1       下载免费PDF全文
通过卫星影像解译、野外实地调查并结合前人研究成果,对位于祁连山北缘的玉门—北大河断裂晚第四纪构造活动特征进行研究。结果表明,玉门—北大河断裂为一条全新世活动的逆冲断裂,该断裂西起玉门青草湾,向东经老玉门市、大红泉止于骨头泉,全长约80km,整体走向NWW。根据断裂的几何结构及活动习性可将其分为三段:东段构造形态简单连续,为逆冲断层陡坎为主的古地震地表破裂带;中段结构复杂,由多条次级断层组成,以逆冲扩展为主;西段未出露地表而成为盲断裂-褶皱带。通过对断层陡坎差分GPS测量及相应地貌面年代测试,得到断裂晚更新世以来逆冲速率约为(0.73±0.09)mm/a。  相似文献   

18.
The Fodongmiao-Hongyazi Fault (FHF)is one of the most active faults of the northern Qilian thrust fault zone. The 1609 Hongyazi M7 1/4 earthquake occurred on the east segment of the FHF, an area with a complex geometry at the Mayinghe River site. The seismogenic pattern of this earthquake revealed by complex surface ruptures remains unclear. In this paper, we focus on active tectonic deformation around the Hujiatai anticline (HA)in the Mayinghe River site. Combining with topographic survey via dGPS across deformed terraces and alluvial fans, a field survey of the geological section across the HA, the characteristics of the active fold and several sub-faults were constrained. Meanwhile, combined with the seismic reflection profiles passing through the anticline, the correspondence relationship between surface expressions of this tectonic and the deep structure was discussed. According to our research, the HA is a result of northward propagation of the range-front thrust fault F1. At the same time, a thrust fault F2 with dextral strike-slip motion and a thrust fault F4 were formed on the east side and north side of the HA, respectively. These two active faults accommodated local deformation. Trench results and 14C dating reveal that the 1609 Hongyazi M7 1/4 earthquake ruptured the T1 terrace in the Huangcaoba site. Combined with previous field investigations and literature about the 1609 Hongyazi earthquake, we suggest that this earthquake occurred on the range-front fault F1, and the depth of the hypocenter may be about 8~22km.  相似文献   

19.
西南天山柯坪逆冲推覆构造带的地壳缩短分析   总被引:7,自引:5,他引:7       下载免费PDF全文
柯坪逆冲推覆构造带是西南天山山前晚新生代以来形成的活动逆断裂-褶皱带,由5~6排近平行的弧形褶皱带组成,出露地层为寒武系—第四系。背斜形态多为复式箱状背斜和不对称的斜歪背斜,分别与断层弯曲背斜和断层扩展背斜的几何形态一致。地震勘探资料显示,各褶皱带前缘活动逆断裂在深部归并于统一的、由寒武系中的石膏层组成的滑脱面。滑脱面深度具有南浅北深、东浅西深的特点,皮羌断裂西侧滑脱面深度约为9km,东侧滑脱面深度为5km。在柯坪逆冲推覆构造中部的皮羌断裂东西两侧各5km和8km的位置,以断层弯曲褶皱和断层扩展褶皱构造模型为指导,用线长平衡的方法完成了2条长度分别为78km和73km的平衡地质剖面,恢复到变形前的形态后计算出这2条剖面上的地壳缩短量分别为40km和45km,缩短率为33%和37%。由于对柯坪逆冲推覆构造开始形成时间的证据较少,所以要计算长期的缩短速率是比较困难的。对比天山南麓库车活动逆断裂-褶皱带的形成时代,以及柯坪逆冲推覆构造与印干断裂的关系,认为柯坪逆冲推覆构造形成于第四纪早期的西域砾岩沉积阶段,按距今2.5Ma计算,柯坪逆冲推覆构造的地壳缩短速率是15.4~17.3mm/a  相似文献   

20.
The Youshashan Fault lies in the south flank of Yingxiongling anticline, southwestern margin of Qaidam Basin. The Yingxiongling anticline is one of the most active neotectonics, situated at the front of folds expanding southward in the Qaidam Basin. Research on the paleoseimology and Late Quaternary slip rate of this fault is important for hazard assessment and understanding tectonic deformation in this area. We excavated a 27-m-long trench across the Youshashan fault where a pressure bridge formed on the Holocene alluvial fans, measured a profile of the fold scarp created by the fault west of the Youshashan mountain, and collected several samples of finer sands for luminescence dating. Analysis of these data shows that(1) The Youshashan Fault is a Holocene active feature. The fold scarp in the basin indicates that this fault has been active along a same surface trace since at least mid-late Pleistocene. At least two paleoseismic events are revealed by trenching, both occurred in Holocene. The latest event Ⅱ in the trench happened after 500a. The current information fails to confidently support that it is the 1977 Mangya M6.4 earthquake, but cannot excludes the possibility of it is related to this earthquake. The other event Ⅰ occurred about between 1 000a to 4 000a. Erosion after the event Ⅰ prevents us to constrain the event age and to identify more events further. (2)The vertical slip rate of the Youshashan fault is about(0.38±0.06)mm/a since mid-late Pleistocene. Comparing with relative speeds of GPS sites across the Yingxiongling anticline suggests that the Youshashan fault is an important structure which is accommodating crustal shortening in this region.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号