首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
The local earthquake waveforms recorded on broadband seismograph network of Institute of Seismological Research in Gujarat, India have been analyzed to understand the attenuation of high frequency (2–25 Hz) P and S waves in the region. The frequency dependent relationships for quality factors for P (Q P) and S (Q S) waves have been obtained using the spectral ratio method for three regions namely, Kachchh, Saurashtra and Mainland Gujarat. The earthquakes recorded at nine stations of Kachchh, five stations of Saurashtra and one station in mainland Gujarat have been used for this analysis. The estimated relations for average Q P and Q S are: Q P = (105 ± 2) f 0.82 ± 0.01, Q S = (74 ± 2) f 1.06 ± 0.01 for Kachchh region; Q P = (148 ± 2) f 0.92 ± 0.01, Q S = (149 ± 14) f 1.43 ± 0.05 for Saurashtra region and Q P = (163 ± 7) f 0.77 ± 0.03, Q S = (118 ± 34) f 0.65 ± 0.14 for mainland Gujarat region. The low Q (<200) and high exponent of f (>0.5) as obtained from present analysis indicate the predominant seismic activities in the region. The lowest Q values obtained for the Kachchh region implies that the area is relatively more attenuative and heterogeneous than other two regions. A comparison between Q S estimated in this study and coda Q (Qc) previously reported by others for Kachchh region shows that Q C > Q S for the frequency range of interest showing the enrichment of coda waves and the importance of scattering attenuation to the attenuation of S waves in the Kachchh region infested with faults and fractures. The Q S/Q P ratio is found to be less than 1 for Kachchh and Mainland Gujarat regions and close to unity for Saurashtra region. This reflects the difference in the geological composition of rocks in the regions. The frequency dependent relations developed in this study could be used for the estimation of earthquake source parameters as well as for simulating the strong earthquake ground motions in the region.  相似文献   

2.
The mechanisms contributing to the attenuation of earthquake ground motion in the distance range of 10 to 200 km are studied with the aid of laboratory data, coda wavesRg attenuation, strong motion attenuation measurements in the northeast United States and Canada, and theoretical models. The frequency range 1–10 Hz has been studied. The relative contributions to attenuation of anelasticity of crustal rocks (constantQ), fluid flow and scattering are evaluated. Scattering is found to be strong with an albedoB 0=0.8–0.9 and a scattering extinction length of 17–32 km. The albedo is defined as the ratio of the total extinction length to the scattering extinction length. TheRg results indicate thatQ increases with depth in the upper kilometer or two of the crust, at least in New England. CodaQ appears to be equivalent to intrinsic (anelastic)Q and indicates that thisQ increases with frequency asQ=Q o f n , wheren is in the range of 0.2–0.9. The intrinsic attenuation in the crust can be explained by a high constantQ (500Q o2000) and a frequency dependent mechanism most likely due to fluid effects in rocks and cracks. A fluid-flow attenuation model gives a frequency dependence (QQ o f 0.5) similar to those determined from the analysis of coda waves of regional seismograms.Q is low near the surface and high in the body of the crust.  相似文献   

3.
QC-estimates of Kachchh Basin in western India have been obtained in a high frequency range from 1.5 to 24.0 Hz using the aftershock data of Bhuj earthquake of January 26, 2001 recorded within an epicentral distance of 80 km. The decay of coda waves of 30 sec window from 186 seismograms has been analysed in four lapse time windows, adopting the single backscattering model. The study shows that Qc is a function of frequency and increases as frequency increases. The frequency dependent Qc relations obtained for four lapse-time windows are: Qc=82 f1.17 (20–50 sec), Qc=106 f1.11 (30–60 sec), Qc=126f1.03 (40–70 sec) and Qc=122f1.02 (50–80 sec). These empirical relations represent the average attenuation properties of a zone covering the surface area of about 11,000, 20,000, 28,000 and 38,000 square km and a depth extent of about 60, 80, 95, 110 km, respectively. With increasing window length, the degree of frequency dependence, n, decreases marginally from 1.17 to 1.02, whereas Q0 increases significantly from 82 to 122. At lower frequencies up to 6 Hz, Qc−1 of Kachchh Basin is in agreement with other regions of the world, whereas at higher frequencies from 12 to 24 Hz it is found to be low.  相似文献   

4.
We investigated characteristics of eruption tremor observed for 24 eruptions at 18 volcanoes based on published reports. In particular, we computed reduced displacements (DR) to normalize the data and examined tremor time histories. We observed: (a) maximum DR is approximately proportional to the square root of the cross sectional area of the vent, however, with lower than expected slope; (b) about one half of the cases show approximately exponential increases in DR at the beginnings of eruptions, on a scale of minutes to hours; (c) one half of the cases show a sustained maximum level of tremor; (d) more than 90% of the cases show approximately exponential decay at the ends of eruptions, also on a scale of minutes to hours; and (e) exponential increases, if they occur, are commonly associated with the first large stage of eruptions. We estimate the radii of the vents using several methods and reconcile the topographic estimates, which are systematically too large, with those obtained from DR itself and theoretical considerations. We compare scaling of tremor DR with that for explosions and find that explosions have large absolute pressures and scale with vent radius squared, whereas tremor consists of pressure fluctuations that have lower amplitudes than the absolute pressure of explosions, and the scaling is different. We explore several methods to determine the appropriate scaling. This characteristic helps us to distinguish the type of eruptions: explosive (Vulcanian or Strombolian) eruptions versus sustained or continuous ash (e.g. Plinian) eruptions. Average eruption discharge, estimated from the total volume of tephra and the total duration of eruption tremor, is well correlated with peak discharge calculated from cross sectional area of the vent and velocity of volcanic ejecta. These results suggest similar scaling between different eruption types and the overall usefulness of monitoring tremor for evaluating volcanic activity.  相似文献   

5.
The seismic energy attenuation in the frequency range of 1–18 Hz was studied in the two tectonically active zones of Irno Valley (Southern Italy) and Granada Basin (South-East Spain). Data were recorded by short period vertical components seismographs for low-magnitude local earthquakes. The method of coda waves, assuming singleS toS scattering approximation, was used to calculate the quality factorQ from the two data set. Results show a quality factor increasing with frequency, following the empirical lawQ=Q o f n .Q o andn are lower for the Irno Valley than for Granada. This result is interpreted in terms of different scattering environments present in the two investigated areas.  相似文献   

6.
The August 1991 eruptions of Hudson volcano produced ~2.7 km3 (dense rock equivalent, DRE) of basaltic to trachyandesitic pyroclastic deposits, making it one of the largest historical eruptions in South America. Phase 1 of the eruption (P1, April 8) involved both lava flows and a phreatomagmatic eruption from a fissure located in the NW corner of the caldera. The paroxysmal phase (P2) began several days later (April 12) with a Plinian-style eruption from a different vent 4 km to the south-southeast. Tephra from the 1991 eruption ranges in composition from basalt (phase 1) to trachyandesite (phase 2), with a distinct gap between the two erupted phases from 54–60 wt% SiO2. A trend of decreasing SiO2 is evident from the earliest part of the phase 2 eruption (unit A, 63–65 wt% SiO2) to the end (unit D, 60–63 wt% SiO2). Melt inclusion data and textures suggest that mixing occurred in magmas from both eruptive phases. The basaltic and trachyandesitic magmas can be genetically related through both magma mixing and fractional crystallization processes. A combination of observed phase assemblages, inferred water content, crystallinity, and geothermometry estimates suggest pre-eruptive storage of the phase 2 trachyandesite at pressures between ~50–100 megapascal (MPa) at 972 ± 26°C under water-saturated conditions (log fO2 –10.33 (±0.2)). It is proposed that rising P1 basaltic magma intersected the lower part of the P2 magma storage region between 2 and 3 km depth. Subsequent mixing between the two magmas preferentially hybridized the lower part of the chamber. Basaltic magma continued advancing towards the surface as a dyke to eventually be erupted in the northwestern part of the Hudson caldera. The presence of tachylite in the P1 products suggests that some of the magma was stalled close to the surface (<0.5 km) prior to eruption. Seismicity related to magma movement and the P1 eruption, combined with chamber overpressure associated with basalt injection, may have created a pathway to the surface for the trachyandesite magma and subsequent P2 eruption at a different vent 4 km to the south-southeast. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.  相似文献   

7.
Pyroclastic flow emplacement is strongly influenced by eruption column height. A surface along which kinetic energy is zero theoretically connects the loci of eruption column collapse with all coeval ignimbrite termini. This surface is reconstructed as a two-dimensional energy line for the 1912 Katmai pyroclastic flow in the Valley of Ten Thousand Smokes from mapped flow termini and the runup of the ignimbrite onto obstructions and through passes. Extrapolation of the energy line to the vicinity of the source vent at Novarupta suggests the eruption column which generated the ignimbrite eruption was approximately 425 m high. The 1912 pyroclastic flow travelled about 25 km downvalley. Empirical velocity data calculated from runup elevations and surveyed centrifugal superelevations indicate initial velocities near Novarupta were greater than 79–88 m s–1. The flow progressively decelerated and was travelling only 2–8 m s–1 when it crossed a moraine 16 km downvalley. The constant slope of the energy line away from Novarupta suggests the flow was systematically slowed by internal and basal friction. Using a simple physical model to calculate flow velocities and a constant kinetic friction coefficient (Heim coefficient) of 0.04 derived from the reconstructed energy line, the flow is estimated to have decelerated at an average rate of –0.16 m s–2 and to have taken approximately 9.5 minutes to travel 25 km down the Valley of Ten Thousand Smokes. The shear strength of the flowing ignimbrite at the moraine was approximately 0.5 kPa, and its Bingham viscosity when it crossed the moraine was 3.5 × 103 P. If the flow was Newtonian, its viscosity was 4.2 × 103 P. Reynolds and Froude numbers at the moraine were only 41–62 and 0.84–1.04, respectively, indicating laminar, subcritical flow.  相似文献   

8.
The formation of the hydrothermal system in the Valley of Geysers is shown to be governed by a structure of radial and circular faults of above-intrusion zone of a partially melted magmatic body with an epicenter near the Upper-Geyser Field, while the hydrothermal system is shown to receive its water from elevations of +500 to +900 m abs (according to isotopic data). The catastrophic landslide of June 3, 2007, was just a stage in the general scenario of the gradual hydrothermal transformation of the inclined Geyser unit (Q 3 4 grn), building up the roof of the hydrothermal reservoir, with a gradual decline of slide resistance. The slide was triggered by the increased pressure in the hydrothermal and magmatic systems and the saturation of the Geyser unit by moisture during spring flood. According to the data of continuous regime thermohydrodynamic observations carried out in the Valley of Geysers with the use of HOBO-loggers of temperature and pressure since July 2007 to April 2010, the mean time between eruptions of Velikan geyser was 348 minutes. The intensification of precipitation input directly into the geyser pool causes a short-time increase in the time between eruptions (up to the maximum of 32 h). According to observations at the “Plotina” gage, the total estimated mean annual discharge of thermal springs (by chlorine ion) in the Valley of Geysers is 263 kg/s; the discharge of thermal springs is governed by the level of Poldprudnoe Lake and its seasonal variations exceed 40%.  相似文献   

9.
Applying segment-wise altimetry-based gravest empirical mode method to expendable bathythermograph temperature, Argo salinity, and altimetric sea surface height data in March, June, and November from San Francisco to near Japan (30° N, 145° E) via Honolulu, we estimated the component of the heat transport variation caused by change in the southward interior geostrophic flow of the North Pacific subtropical gyre in the top 700 m layer during 1993–2012. The volume transport-weighted temperature (TI) is strongly dependent on the season. The anomaly of TI from the mean seasonal variation, whose standard deviation is 0.14°C, was revealed to be caused mainly by change in the volume transport in a potential density layer of 25.0?25.5σ??. The anomaly of TI was observed to vary on a decadal or shorter, i.e., quasi-decadal (QD), timescale. The QD-scale variation of TI had peaks in 1998 and 2007, equivalent to the reduction in the net heat transport by 6 and 10 TW, respectively, approximately 1 year before those of sea surface temperature (SST) in the warm pool region, east of the Philippines. This suggests that variation in TI affects the warm pool SST through modification of the heat balance owing to the entrainment of southward transported water into the mixed layer.  相似文献   

10.
We present results of study of the best-documented eruptions of Pavlof volcano in historic time. The 1986 eruptions were mostly Strombolian in character; a strong initial phase may have been Vulcanian. The 1986 activity erupted at least 8×106 m3 of feldspar-phyric basaltic andesite lava (SiO2=53–54%), and a comparable volume of wind-borne tephra. During the course of the eruption, 5300 explosion earthquakes occurred, the largest of which was equivalent to an M L =2.5 earthquake. Volcanic tremor was recorded for 2600 hours, and the strongest tremor was recorded out to a distance of 160 km and had an amplitude of at least 54 cm2 reduced displacement. The 1986 eruptions modified the structure of the vent area for the first time in over two decades. A possible pyroclastic flow was observed on 19 June 1986, the first time such a phenomenon has been observed at the volcano. Overall, the 1986 eruptions were the strongest and longest duration eruptions in historic time, and changed a temporal pattern of activity that had persisted from 1973–1984.  相似文献   

11.
The theoretical acceleration spectrum of observation site has been obtained from source acceleration spectrum derived from scaling law, using attenuation modelQ=Q ν f η . A comparison of a set of theoretical acceleration spectra with observation spectra has been made, and we have obtained the attenuation model for observation site and seismic moment magnitude. We obtain thatQ o=300,η=0.25 for Wuqia area, Xinjing Zizhizhou, and seismic moment magnitudes of 18 greater aftershocks of Wuqia earthquake occurred in 1985. In order to obtain seismic moment magnitued conveniently, three functional tables of acceleration spectra at 1Hz as the distances for variousQ value have been made. The seismic moment magnitude can be quickly measured from acceleration spectrum at 1Hz according to these tables (epicenter has to be known). The Chinese version of this paper appeared in the Chinese edition ofActa Seismologica Sinica,14, 435–445, 1992.  相似文献   

12.
Low-mature gases and typical low-mature gas fields in China   总被引：2，自引：0，他引：2  
No natural gas pool of industrial importance could be formed at the low-evolution stage of organic matter. In the 1980s, on the basis of the development in exploration practice, the hypotheses of bio-thermo-catalytic transitional zone gases and early thermogenic gases were proposed. The lower-limit Ro values for the formation and accumulation of natural gases of industrial importance have been expanded to 0.3%―0.4%. In the light of the two-stage model established on the basis of carbon isotope fractionation in coal-type natural gases, the upper-limit Ro values have been set at 0.8%―1.0%. In terms of the geological practice in the low-mature gas zones and China's main coal-type gas fields, it is feasible and proper to set the upper-limit Ro value of low-mature gases at 0.8%. Supper-large gas fields such as the Urengoy gas field in western Siberian Basin should belong to low-mature gas fields, of which the natural gas reserves account for more than 20% of the global proven reserves, providing strong evidence for the significance of such a type of resources. The proven natural gas reserves in the Turpan-Hami Basin of China have almost reached 1000 × 108 m3. The main source rocks in this area are the Jurassic Xishanyao Formation, which occurs as a suite of coal series strata. The corresponding thermal evolution indices (Ro ) are mainly within the range of about 0.4%―0.8%, the δ 13C1 values of methane vary between-44‰ and-39‰ (correspondingly Ro =0.6%―0.8%), and those of ethane are within the range of-29‰―-26‰, indicating that natural gases in the Turpan-Hami Basin should be designated to coal-type low-mature gases. The light hydrocarbon evolution indices of natural gases also fall within the area of low evolution while the precursor type of light hydrocarbons also shows the characteristics of the coal-type. The geological background, carbon isotopic composition and light hydrocarbon index all provide strong evidence suggesting that the proven natural gases in the Turpan-Hami Basin are low-mature gases. In China a gas field with the gas reserves reaching 300 ×108 m3 can be defined as a large gas field, and thus the proven low-mature gases in the Turpan-Hami Basin are equivalent to the reserves of three large gas fields. Its existence is of great significance in research on and exploration of low-mature gases in China.  相似文献   

13.
The deposition temperature of the pyroclastic density current (PDC) deposits emplaced during the AD 472 Pollena eruption (Somma-Vesuvius, Italy) has been investigated using the thermal analysis of the magnetic remanence carried by lithic clasts embedded within the deposits. A total of 310 lithic clasts were collected from all the PDC units in the Pollena stratigraphic succession, at different distances from the inferred vent and at different stratigraphic levels. The temperature reached by each individual clast during residence in the PDC was estimated through stepwise thermal demagnetization, with the values from all clasts collected at each site being used to infer the deposition temperature (T dep). Although the sedimentological features of these PDC deposits show some variation, the deposition temperature typically falls in the range 300 to 320°C, with a maximum range of 260 to 360°C. The fairly uniform temperature observed in both the dune bedded and massive deposits points to homogeneity in attainment of T dep for the different deposits and suggests similarity in the depositional regime of the different PDCs and/or in heat transfer to lithic fragments. Similarity in depositional regime was also favoured by the limited control exerted by topography on the distribution of these PDCs, with the northern wall of the Somma caldera that did not act as a morphological barrier. As a result the currents were capable of moving away from the vent, without topographic disturbances and, thus, significant variations in the cooling regime. Because the Pollena eruption is considered similar to the maximum expected event at Somma-Vesuvius, the characteristics of its deposits best simulate the likely maximum hazard for the Vesuvius region. In this regard, Pollena produced hot, dilute PDCs which were able to travel up to 12 km from the vent maintaining high temperatures across this distance.  相似文献   

14.
Post-10 ka rhyolitic eruptions from the Haroharo linear vent zone, Okataina Volcanic Centre, have occurred from several simultaneously active vents spread over 12 km. Two of the three eruption episodes have tapped multiple compositionally distinct homogeneous magma batches. Three magmas totalling ~8 km3 were erupted during the 9.5 ka Rotoma episode. The most evolved Rotoma magma (SiO2=76.5–77.9 wt%, Sr=96–112 ppm) erupted from a southeastern vent, and is characterised by a cummingtonite-dominant mineralogy, a temperature of 739±14°C, and fO2 of NNO+0.52±0.11. The least evolved (SiO2=75.0–76.4 wt%, Sr=128–138 ppm, orthopyroxene+ hornblende-dominant) Rotoma magma erupted from several vents, and was hotter (764±18°C) and more reduced (NNO+0.40±0.13). The ~11 km3 Whakatane episode occurred at 5.6 ka and also erupted three magmas, each from a separate vent. The most evolved (SiO2=73.3–76.2 wt%, Sr=88–100 ppm) Whakatane magma erupted from the southwestern (Makatiti) vent and is cummingtonite-dominant, cool (745±11°C), and reduced (NNO+0.34±0.08). The least evolved (SiO2=72.8–74.1 wt%, Sr=132–134 ppm) magma was erupted from the northeastern (Pararoa) vent and is characterised by an orthopyroxene+ hornblende-dominant mineralogy, temperature of 764±18°C, and fO2 of NNO+0.40±0.13. Compositionally intermediate magmas were erupted during the Rotoma and Whakatane episodes are likely to be hybrids. A single ~13 km3 magma erupted during the intervening 8.1 ka Mamaku episode was relatively homogeneous in composition (SiO2=76.1–76.8 wt%, Sr=104–112 ppm), temperature (736±18°C), and oxygen fugacity (NNO+0.19±0.12). Some of the vents tapped a single magma while others tapped several. Deposit stratigraphy suggests that the eruptions alternated between magmas, which were often simultaneously erupted from separate vents. Both effusive and explosive activity alternated, but was predominantly effusive (>75% erupted as lava domes and flows). The plumbing systems which fed the vents are inferred to be complex, with magma experiencing different conditions in the conduits. As the eruption of several magmas was essentially concurrent, the episodes were likely triggered by a common event such as magmatic intrusion or seismic disturbance.  相似文献   

15.
River supercooling and ice formation is a regular occurrence throughout the winter in northern countries. The resulting frazil ice production can obstruct the flow through intakes along the river, causing major problems for hydropower and water treatment facilities, among others. Therefore, river ice modellers attempt to calculate the river energy budget and predict when supercooling will occur in order to anticipate and mitigate the effects of potential intake blockages. Despite this, very few energy budget studies have taken place during freeze-up, and none have specifically analysed individual supercooling events. To improve our understanding of the freeze-up energy budget detailed measurements of air temperature, relative humidity, barometric pressure, wind speed and direction, short- and longwave radiation, and water temperature were made on the Dauphin River in Manitoba. During the river freeze-up period of late October to early November 2019, a total of six supercooling events were recorded. Analysis of the energy budget throughout the supercooling period revealed that the most significant heat source was net shortwave radiation, reaching up to 298 W/m2, while the most significant heat loss was net longwave radiation, accounting for losses of up to 135 W/m2. Longwave radiation was also the most significant heat flux overall during the individual supercooling events, accounting for up to 84% of the total heat flux irrespective of flux direction, highlighting the importance of properly quantifying this flux during energy budget calculations. Five different sensible (Qh) and latent (Qe) heat flux calculations were also compared, using the bulk aerodynamic method as the baseline. It was found that the Priestley and Taylor method most-closely matched the bulk aerodynamic method on a daily timescale with an average offset of 8.5 W/m2 for Qh and 10.1 W/m2 for Qe, while a Dalton-type equation provided by Webb and Zhang was the most similar on a sub-daily timescale with average offsets of 20.0 and 14.7 W/m2 for Qh and Qe, respectively.  相似文献   

16.
Three types of seismic data recorded near Coalinga, California were analyzed to study the behavior of scattered waves: 1) aftershocks of the May 2, 1983 earthquake, recorded on verticalcomponent seismometers deployed by the USGS; 2) regional refraction profiles using large explosive sources recorded on essentially the same arrays above; 3) three common-midpoint (CMP) reflection surveys recorded with vibrator sources over the same area. Records from each data set were bandpassed filtered into 5 Hz wide passbands (over the range of 1–25 Hz), corrected for geometric spreading, and fit with an exponential model of amplitude decay. Decay rates were expressed in terms of inverse codaQ (Q c –1 ).Q c –1 values for earthquake and refraction data are generally comparable and show a slight decrease with increasing frequency. Decay rates for different source types recorded on proximate receivers show similar results, with one notable exception. One set of aftershocks shows an increase ofQ c –1 with frequency.Where the amplitude decay rates of surface and buried sources are similar, the coda decay results are consistent with other studies suggesting the importance of upper crustal scattering in the formation of coda. Differences in the variation ofQ c –1 with frequency can be correlated with differences in geologic structure near the source region, as revealed by CMP-stacked reflection data. A more detailed assessment of effects such as the depth dependence of scattered contributions to the coda and the role of intrinsic attenuation requires precise control of source-receiver field geometry and the study of synthetic seismic data calculated for velocity models developed from CMP reflection data.  相似文献   

17.
Events from the December 1982 Huairou County, Beijing, and the July 1982 Jianchuan, Yunnan earthquake series were recorded at one station in Beijing City and at four stations in Eryuan area, Yunnan, respectively. Dividing the spectra (for P and S waves) from the smaller events in the series by spectra (for corresponding P and S waves) from the larger events in cach region, we have determined the high frequency source spectral decay rate to be ω?1in both cases. Through trial and error method, we are able to determine the appropriate constantQ P andQ S that corrects the individual spectra to the proper high frequency decay rate. It is found that aQ P of 800 and aQ S of 550 can adequately compensate for the attenuation of the waves in Beijing area. For Jianchuan, Yunnan area the corresponding values are 900 and 400.  相似文献   

18.
Attenuation of seismic waves, quantified by the seismic quality factor Q, holds important information for seismic interpretation, due to its sensitivity to rock and fluid properties. A recently published study of Q, based on surface seismic reflection data, used a modified spectral ratio approach (QVO), but both source and receiver responses were treated as isotropic, based on simple raypath arguments. Here, this assumption has been tested by computing apparent attenuation generated by frequency-dependent directivity of typical marine source and receiver arrays and acquisition geometries. Synthetic wavelet spectra were computed for reflected rays, summed over the first Fresnel zone, from the base of a single interval, 50–3000 m thick and velocity 2000 m/s, overlying a 2200 m/s half-space, and for offsets of 71–2071 m. The source and receiver geometry were those of an actual survey. The modelled spectra are clearly affected by directivity, most strongly because of surface ghosts. In general, the strong high-frequency component, produced by the array design, leads to apparently negative attenuation in individual reflection events, though this is dependent on offset and target depth. For shallow targets (less than 400–500 ms two-way traveltime (TWT) depth), apparent Q-values as extreme as ?50 to ?100 were obtained. For deeper target depths, the directivity effect is far smaller. The implications of the model study were tested on real data. QVO was applied to 20 true-spectrum-processed CMPs, in a shallow (405–730 ms TWT) and a deeper (1000–1300 ms TWT) interval, firstly using a measured far-field source signature (effectively isotropic), and secondly using computed directivity effects instead. Mean interval Q?1-values for the deeper interval, 0.029 ± 0.011 and 0.027 ± 0.018 for conventional and directional processing, respectively, suggested no directivity influence on attenuation estimation. For the shallow interval (despite poor spectral signal-to-noise ratios and hence scattered attenuation estimates), directional processing removed directivity-generated irregularities from the spectral ratios, resulting in an improvement from Q?1int = ?0.036 ± 0.130 to a realistic Q?1int = 0.012 ± 0.030: different at 94% confidence level. Equivalent Q-values are: for the deeper interval, 35 and 37 for conventional and directional processing, respectively, and ?28 and 86 for the shallow interval. These results support the conclusions of the model studies, i.e. that source/receiver directivity has a negligible effect except for shallow targets (e.g. TWT depth ≤ 500 ms) imaged with conventional acquisition geometry. In such cases directivity corrections to spectra are strongly recommended.  相似文献   

19.
This paper investigates the spatial and temporal variations of runoff, erosion and rate of sediment transport on an agricultural field submitted to natural rainfalls. The site, located in the Eastern Townships (Québec, Canada), is a corn field (10000 m2) where sheetwash erosion is active. Water (Q) and sediment (Qs) discharges were measured from June to October at eight locations on the field and for ten rainfall events. Analysis of the data was carried out on an aggregate data set and on the distributed measurements in time and space. The results showed that changes in vegetation, soil compaction and crusting are critical in determining temporal variations of runoff and erosion. Until August, the increase in soil compaction reduced infiltration capacity and depression storage and generated greater runoff for a given rainfall intensity (I). Sediment transport decreased as particle detachment is less likely to occur when vegetation breaks the drop impact and the soil surface is sealed. Later in the season, we observed an increase in sediment concentration associated with the presence of burrowing insects and harvest activity, providing loose sediments to the broken down surface. Intercepts and slopes of the relationship between Q and Qs also vary during the period of measurement. High sediment availability over the soil surface in June and October gives high intercept values. The slope of the relationship is more stable but difficult to estimate for extreme events (high values of I or low Q values) where the number of sampled points are small. During a rainfall, the response of the field is dominated by the topography and drainage area. The largest amount of runoff and erosion occurred on straight and steep slopes with small drainage areas, and on converging gentle slopes with large drainage areas. Although aggregate runoff and erosion values are decreasing with drainage area, parameters of the Qs-Q relationship for different locations on the field are not statistically different. These results bear important consequences for models of sheetwash erosion on agricultural fields.  相似文献   

20.
Bedload transport data from planebed and step‐pool reach types are used to determine grain size transport thresholds for selected upland streams in southeast Australia. Morphological differences between the reach types allow the effects of frictional losses from bedforms, microtopography and bed packing to be incorporated into the dimensionless critical shear stress value. Local sediment transport data are also included in a regime model and applied to mountain streams, to investigate whether empirical data improve the delineation of reach types on the basis of dimensionless discharge per unit width (q*) and dimensionless bedload transport (qb*). Instrumented planebed and step‐pool sites are not competent to transport surface median grains (D50s) at bankfull discharge (Qbf). Application of a locally parametrized entrainment equation to the full range of reach types in the study area indicates that the majority of cascades, cascade‐pools, step‐pools and planebeds are also not competent at Qbf and require a 10 year recurrence interval flood to mobilize their D50s. Consequently, the hydraulic parameters of the regime diagram, which assume equilibrium conditions at bankfull, are ill suited to these streams and provide a poor basis of channel delineation. Modifying the diagram to better reflect the dominant transported bedload size (equivalent to the D16 of surface sediment) made only slight improvements to reach delineation and had greatest effect on the morphologies with smaller surface grain sizes such as forced pool‐riffles and planebeds. Likewise, the Corey shape factor was incorporated into the regime diagram as an objective method for adjusting a base dimensionless critical shear stress (τ*c50b) to account for lithologically controlled grain shape on bed packing and entrainment. However, it too provided only minor adjustments to reach type delineation. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号