首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到18条相似文献,搜索用时 93 毫秒
1.
考虑地震动水压力和波浪效应的共同作用,建立了隔震桥梁的弹塑性有限元分析模型,从太平洋地震研究中心(PEER)的数据库中选取17条天然地震记录对桥墩、铅芯橡胶支座(LRB)进行了IDA分析,通过对IDA曲线的统计形成了桥墩和LRB的概率分位曲线,进而对桥墩、LRB及桥梁系统进行了抗震性能评估。分析得出,基于IDA的抗震性能评估曲线不仅能够清楚地反映出隔震桥梁在不同强度地震下的损伤状况,也能够结合结构所定义的极限状态评估出结构能够抵抗地震等级的大小。桥墩和LRB在17条天然地震动作用下的IDA曲线都表明,随着地震动加速度峰值的增加,各曲线的离散程度愈明显;LRB和桥墩抗震性能的评估显示,LRB在加速度峰值0.1g左右时开始进入屈服阶段,先于桥墩和桥梁结构破坏,故能够起到保护桥梁的作用。  相似文献   

2.
以小雁塔结构为原型,通过试验研究建立其材料本构模型;应用IDA分析方法,建立IDA分析曲线并对小雁塔结构进行增量动力弹塑性分析,判断小雁塔结构的最不利位置,定义IDA分析的极限状态;将IDA曲线的斜率下降幅值与小雁塔结构性能水准相对应,划分小雁塔结构的性能水准指标;通过对小雁塔结构在增量地震动强度作用下地震响应分析和不同性能状态下各层的楼层位移和层间位移角的变化规律,对小雁塔结构进行了抗震性能评估;研究表明:基于IDA分析方法的小雁塔抗震性能评估可以考虑结构抗震能力的随机因素,精确地描述小雁塔结构在地震过程中的行为。该方法为类似砖石古塔结构的抗震性能评估提供了新途径。  相似文献   

3.
现阶段针对建筑复合节能墙体的抗震性能评估主要根据强震发生后墙体损毁程度实现,评估结果精确度低,因此构建强震环境下建筑复合节能墙体抗震性能评估模型,根据复合节能墙体构件的强度和刚度退化系数,描述强震环境下建筑复合节能墙体损伤情况;在此基础上,采用动态增量分析法(IDA)在不同强度地震动输入条件下,根据建筑复合节能墙体结构响应参数和地震动强度参数构建2种参数的关系曲线——IDA曲线,利用R-O单一函数曲线规则化IDA曲线,获取IDA概率分位曲线,并将50%概率分位曲线斜率用于描述墙体结构损伤的变化,该曲线斜率则为墙体结构损伤指数,依据该指数准确评估强震环境下建筑复合节能墙体抗震性能。实验结果表明,所构建模型可准确分析不同峰值地面加速度时建筑复合节能墙体结构的位移变化,且模型随地震等级不断提升,评估建筑复合节能墙体抗震性结果精度逐渐提高,是一种适合强震环境的建筑复合节能墙体抗震评估模型。  相似文献   

4.
混凝土高层建筑结构地震破坏抗毁能力评估   总被引:4,自引:4,他引:0       下载免费PDF全文
许立强 《地震工程学报》2018,40(1):14-19,47
提出基于构件性能的混凝土高层建筑结构地震破坏抗毁能力评估方法,采用强度与延性法分析混凝土高层建筑构件强度和变形,以对强震作用下混凝土高层建筑结构性能实施准确描述。基于建筑结构性能以及多条地震波情况下高层建筑结构倒塌极限状态的分析规范,采用IDA方法设置建筑结构抗倒塌能力系数,并依据该系数获取基于构件性能的混凝土高层建筑结构地震破坏抗毁能力评估流程,实现建筑结构地震破坏抗毁能力的准确评估。实验结果说明,所提方法实现了混凝土高层建筑结构地震破坏抗毁能力的准确评估。  相似文献   

5.
基于地震工程模拟平台Open SEES,研究了型钢混凝土(SRC)框架的数值建模方法。根据试验结果对比了3种不同非线性梁柱单元模型的计算效果,确定了最优单元模型。基于Open SEES平台和增量动力分析(IDA)方法研究了型钢混凝土框架结构的地震易损性。设计了3个具有不同柱梁抗弯承载力之比的结构,对其进行IDA分析,获得了各模型的抗震能力曲线。根据结构抗震能力曲线,求解了结构的地震易损性曲线,得到了结构在地震作用下各性态点的超越概率。对场地地震危险性进行分析,获得了场地地震危险性概率模型。基于结构地震易损性曲线及场地地震危险性概率模型,计算了结构各性态点的年平均超越概率。结果表明:柱梁抗弯承载力之比对计算结果的影响显著,随着柱梁抗弯承载力之比的增大,结构在特定地震动作用下倒塌的概率呈减小趋势。  相似文献   

6.
高墩桥梁的地震响应与传统的中低墩桥梁有很大差别,我国现行桥梁抗震规范对此没有规定。为了合理评估高墩大跨桥梁的抗震性能,以一座连续刚构桥为研究对象,采用OpenSees建立弹塑性有限元动力分析模型,从PEER地震数据库中选取了15条地震记录进行增量动力分析(Incre-mental dynamic analysis,IDA),利用Ramberg-Osgood函数对控制参数进行统计,从而得到了结构概率分位值为10%、50%和90%的IDA曲线,结合定义的损伤状态对结构的抗震性能进行了评估;根据墩身最大曲率分布得到了塑性区域长度,提出了根据最大曲率分布估算墩顶目标位移的方法。结果表明:利用R-O函数统计得到的IDA概率分位曲线能很好地体现桥梁抗震性能,并能给出满足相应性能水准的可靠等级。在强震作用下,高墩结构塑性区域长度与各国规范计算结果吻合,按墩身最大曲率分布估算墩顶位移与IDA分析结果吻合较好,弥补了规范的不足。  相似文献   

7.
截面中部配置型钢的混凝土剪力墙抗震性能研究   总被引:14,自引:2,他引:14  
本文通过试验研究了型钢混凝土(SRC)剪力墙的抗震性能,对16个试件进行了低周反复加载试验,得到了这些构件的延性比;研究了高宽比等参数对型钢混凝土剪力墙抗震性能的影响。在试验中,研究了在中部配置型钢的型钢混凝土剪力墙,结果表明这种新型的型钢混凝土剪力墙具有更好的抗震性能。在试验的基础上,本文建立了型钢混凝土剪力墙恢复力骨架曲线的数学模型,为分析高层结构的非线性地震反应分析提供了基础数据。  相似文献   

8.
考虑到结构抵抗地震作用的机制为结构和地震动的不确定性与非线性相互耦合的过程,采用增量动力分析(IDA)考虑地震动的不确定性,选取16条地震动记录,基于OpenSEES的有限元建模理论对13榀平面RC框架结构进行基于IDA方法的地震易损性分析,分别讨论轴压比、高宽比、混凝土强度以及纵筋强度等结构参数对RC框架结构抗震性能的影响。结果表明:柱轴压比对结构抗震性能的影响显著,而高宽比对结构抗震性能的影响不明显;在保证柱轴压比相近的前提下,提高柱混凝土强度能够提升结构的抗震性能;相同地震作用下梁柱配置纵筋强度较高的框架结构达到立即使用(IO)状态和生命安全(LS)状态的概率较配置纵筋强度较低的大,配置纵筋强度较高的框架结构较配置纵筋强度较低的表现出更好的抗倒塌能力。  相似文献   

9.
基于IDA的多龄期钢排架结构地震易损性分析   总被引:1,自引:0,他引:1       下载免费PDF全文
针对钢材锈蚀导致结构抗震性能退化的现象,需对多龄期结构进行抗震性能评估。基于酸性大气环境下不同锈蚀程度钢材材性试验结果,以SAP2000为平台建立不同服役龄期(30年、40年、50年、60年)钢排架结构数值模型。选取PGA为地震动强度指标,最大层间位移角为地震需求参数对模型进行增量动力分析(IDA),建立结构地震需求模型,基于地震需求模型建立多龄期钢排架结构厂房地震易损性曲线和震害矩阵。研究成果可为城市多龄期建筑地震风险评估提供依据。  相似文献   

10.
设计1个20层SRC框架核心筒结构模型,考虑地震的随机性和结构材料的不确定性,采用拉丁超立方体抽取结构-地震动样本,之后对其进行增量动力分析(IDA),以第1周期谱加速度为强度指标,最大层间位移角为结构需求,定义4个性能水平,研究该结构的易损性。通过引入群体结构震害评估中易损性指数的概念,计算多遇、设防和罕遇地震下的易损性指数。结果表明:以易损性指数作为评价指标,该结构在多遇地震作用下,处于轻微破坏状态;在设防地震作用下,处于中等破坏状态;在罕遇地震作用下,结构处于严重破坏状态。可认为依据我国抗震规范设计的SRC框架核心筒结构能够满足"小震不坏"、"中震可修"和"大震不倒"的抗震设防目标。  相似文献   

11.
Fast performance uncertainty estimation via pushover and approximate IDA   总被引:1,自引:0,他引:1  
Approximate methods based on the static pushover are introduced to estimate the seismic performance uncertainty of structures having non‐deterministic modeling parameters. At their basis lies the use of static pushover analysis to approximate Incremental Dynamic Analysis (IDA) and estimate the demand and capacity epistemic uncertainty. As a testbed we use a nine‐storey steel frame having beam hinges with uncertain moment–rotation relationships. Their properties are fully described by six, randomly distributed, parameters. Using Monte Carlo simulation with Latin hypercube sampling, a characteristic ensemble of structures is created. The Static Pushover to IDA (SPO2IDA) software is used to approximate the IDA capacity curve from the appropriately post‐processed results of the static pushover. The approximate IDAs allow the evaluation of the seismic demand and capacity for the full range of limit‐states, even close to global dynamic instability. Moment‐estimating techniques such as Rosenblueth's point estimating method and the first‐order, second‐moment (FOSM) method are adopted as simple alternatives to obtain performance statistics with only a few simulations. The pushover is shown to be a tool that combined with SPO2IDA and moment‐estimating techniques can supply the uncertainty in the seismic performance of first‐mode‐dominated buildings for the full range of limit‐states, thus replacing semi‐empirical or code‐tabulated values (e.g. FEMA‐350), often adopted in performance‐based earthquake engineering. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

12.
增量动力分析(IDA)作为动力形式的静力推覆法,被广泛应用于建筑结构的抗震能力分析和性能评估中,但其在土建筑遗址地震易损性分析中的应用甚少。基于IDA方法尝试对交河故城塔林区金刚宝座式塔土建筑遗址进行在地震作用下的易损性和抗震能力分析,以谱加速度SaT1,5%)作为地震动强度指标,最大层间位移角θmax作为结构损伤指标进行IDA分析,得到土建筑遗址在一系列调幅地震动作用下的IDA曲线、地震需求概率模型和易损性曲线,计算出模型的倒塌率和CMR值。通过以上分析得出金刚宝座式塔的易损性和抗震能力,为今后土建筑遗址抗震保护提供理论基础和分析思路。  相似文献   

13.
结合国际地震工程界提出的新一代基于性能的地震工程的框架方法,重点阐述了性能评估中涉及的主要问题。对性能评估使用的静力非线性分析、动力非线性分析方法进行了总结,在此基础上详细阐述了在基于概率的性能评估中有应用前景的增量动力分析方法的概念、相关问题及其应用,并简要介绍了基于增量动力分析思想提出的一些简化方法。最后提出了今后研究的建议,特别是结构非线性分析方面的研究重点。  相似文献   

14.

Evaluation of structural performance under seismic excitations from low intensity to high intensity is essential to verify the seismic resistant capacity of a structure, and usually carried out by the incremental dynamic analysis (IDA) method or pushover method. The recently developed endurance time (ET) method is another method that uses dynamic pushover excitations, i.e., endurance time acceleration function, to obtain results similar to those obtained by IDA or pushover methods with low computational cost and acceptable accuracy. This study proposes an improvement on the ET method by considering more restrictions for both the elastic and inelastic response spectra in the generation procedure, and by specifying a target duration. Four reinforced concrete frame structures with 4, 8, 12, and 16 stories are adopted to verify the accuracy of the improved method. Comparison of the results obtained by the proposed method, the ET method and the IDA method shows that the improved method has a higher accuracy than the ET method. For evaluation of structural responses under specific ground motion intensity, which is typically required in seismic design codes, the results obtained by the proposed method are compared with five commonly used ground motion selection methods, and shows the proposed method provides acceptable accuracy for engineering applications.

  相似文献   

15.
本文主要对增量动力弹塑性分析(IDA)方法的两个方面作了改进:(1)以增量动力弹塑性分析方法的基本原理为基础,以快速非线性时程分析(FNA)方法为计算工具,形成快速增量动力弹塑性分析(FIDA)方法。(2)仅以IDA分析结果为基础,建立地震易损性曲线及地震破坏概率计算的离散型式。为了校验本文方法的可行性与有效性,应用增量动力弹塑性分析、模态增量动力弹塑性分析与快速增量动力弹塑性分析计算一个14层筒中筒结构试验模型,比较了用上述三种方法的计算误差与计算效率,比较了传统方法与本文方法计算该模型结构的地震易损性曲线的差别。  相似文献   

16.
Collapse assessment of steel moment frames using endurance time method   总被引:1,自引:1,他引:0  
In endurance time(ET) method structures are subjected to a set of predesigned intensifying excitations. These excitations are produced in a way that their response spectrum, while complying with a specifi ed spectrum, intensifi es with time so they can be used approximately to simulate the average effects of several ground motions scaled to different intensities. In this paper applicability of the ET method for evaluating collapse potential of buildings is investigated. A set of four steel moment frames is used for collapse assessment. The process of using ET method in collapse evaluation is explained and the results are compared with incremental dynamic analysis(IDA) results. It is shown that although the computational effort using the ET method is much less than the IDA analysis, the results of both methods are consistent. Finally collapse fragility curves using ET and IDA methods are produced and it is shown that the probabilities of collapse in different hazard levels are also consistent.  相似文献   

17.
基于单地震动记录IDA方法的结构倒塌分析   总被引:5,自引:2,他引:3  
增量动力分析(Incremental Dynamic Analysis, IDA)作为静力Pushover分析的动力拓展,可以全面、准确地分析结构的性能变化,尤其可以很好地分析结构倒塌这一动力失稳问题.本文基于单地震动记录的IDA方法,提出了"折半取中"原则,以确定结构倒塌极限状态点.以一榀五层三跨钢筋混凝土框架结构为例,分别考虑钢筋强化模型、理想弹塑性模型和软化模型,对其进行倒塌分析.结果表明:钢筋的屈服后强化特性对结构抗倒塌能力具有显著的影响.  相似文献   

18.
A methodology based on incremental dynamic analysis (IDA) is presented for the evaluation of structures with vertical irregularities. Four types of storey‐irregularities are considered: stiffness, strength, combined stiffness and strength, and mass irregularities. Using the well‐known nine‐storey LA9 steel frame as a base, the objective is to quantify the effect of irregularities, both for individual and for combinations of stories, on its response. In this context a rational methodology for comparing the seismic performance of different structural configurations is proposed by means of IDA. This entails performing non‐linear time history analyses for a suite of ground motion records scaled to several intensity levels and suitably interpolating the results to calculate capacities for a number of limit‐states, from elasticity to final global instability. By expressing all limit‐state capacities with a common intensity measure, the reference and each modified structure can be naturally compared without needing to have the same period or yield base shear. Using the bootstrap method to construct appropriate confidence intervals, it becomes possible to isolate the effect of irregularities from the record‐to‐record variability. Thus, the proposed methodology enables a full‐range performance evaluation using a highly accurate analysis method that pinpoints the effect of any source of irregularity for each limit‐state. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号