首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到19条相似文献,搜索用时 62 毫秒
1.
新乡-商丘断裂是南华北盆地与渤海湾盆地、鲁西隆起的分界断裂,是一条长期活动的区域性深大断裂。浅层地震勘探与跨断层钻孔联合剖面探测工作已证实该断裂延津至封丘段的最新活动时代为晚更新世,本文通过对典型地震勘探剖面和钻探资料综合分析认为:新乡-商丘断裂延津至封丘段断裂结构复杂,新近纪以来构造样式在不同构造部位有显著差异。延津段在地震勘探剖面上浅部显示为负花状构造;封丘段变化较大,东部在剖面上为多组阶状正断层组合,形成了由断层带控制的构造背斜,平面上表现为NW向排列、走向NNE雁列状断层组合;西部结构单一,自东向西断裂控制的浅部地层变形范围增大,断层带逐步变宽。根据新乡-商丘断裂延津至封丘段剖面上的构造样式与平面上的组合模式,表明该段断裂最新活动具有走滑运动性质。  相似文献   

2.
西秦岭临潭-宕昌断裂第四纪最新活动特征   总被引:2,自引:0,他引:2  
临潭-宕昌断裂是西秦岭造山带内一条重要的分支断裂,其最新活动特征是分析西秦岭构造变形的重要依据。临潭-宕昌断裂的新构造活动强烈,中强地震频繁,但目前对于断裂的新活动特征研究程度较低,未见有其全新世活动地质地貌证据的报道。文中基于遥感解译、宏观地貌分析研究断裂的长期活动表现和分段性;同时通过地质地貌考察、无人机摄影测量、差分GPS和放射性碳测年等方法定量研究断裂的新活动特征;最后基于研究结果探讨了断裂及附近区域的地震危险性和区域构造变形。结果表明:根据断层迹线收敛程度和宏观地貌差异,可将临潭-宕昌断裂分为西、中、东3段;断裂的运动性质以左旋走滑为主,兼具逆冲分量,左旋走滑使洮河及其支流、冲沟和山脊等发生同步左旋拐弯,最大左旋位移可达3km,逆冲分量使新近纪盆地边缘和内部形成300~500m的垂向位移;断裂的最新活动时代为全新世,限定了1次2 090~7 745a BP(置信度为2σ)的全新世古地震事件;全新世早期以来,临潭-宕昌断裂东段主干断裂的左旋走滑速率为0.86~1.65mm/a,垂直滑动速率为0.05~0.10mm/a。临潭-宕昌断裂分配了约2mm/a的左旋走滑分量,是东昆仑-西秦岭阶区变形分配的关键断裂之一。  相似文献   

3.
郯庐断裂带淮河南到女山湖段晚第四纪以来的新活动   总被引:1,自引:0,他引:1  
以郯庐断裂带淮河南到女山湖段晚第四纪以来是否具有新活动为主要研究目标,通过遥感影像资料解译及地表反复调查,选择构造地貌显著地段开挖探槽,识别和记录其变形形态,分析其活动习性,定向采集新活动变形物质,在保持原态基础上磨制定向薄片,并进行微观构造分析论证。研究表明,断裂沿线线状构造地貌清晰,横跨断裂带的3个探槽均揭示出晚第四纪以来活动痕迹,断裂最新错断了晚更新世-全新世地层;滑移方式多表现为粘滑,典型表现为断层陡坎、楔状堆积、断层和充填裂缝等,总体显示为脆性高速变形特征,属于史前地震遗迹。上述认识部分得到微观分析证实。文中还初步探讨了淮河南北郯庐断裂最新活动特征的异同点及其可能的原因。  相似文献   

4.
东天山阜康断裂的变形方式与全新世滑动速率   总被引:3,自引:0,他引:3  
利用实地调查资料对东天山阜康断裂的变形方式和全新世滑动速率进行分析与研究,结果表明:阜康断裂由4条低角度的南倾逆断层斜列组成,具有最新的构造活动性,端部断层活动较弱,全新世平均垂直滑动速率为0.13-0.33mm/a,中部断层活动强烈,全新世平均垂直滑动速率大于1.42mm/a;全新世断层活动方式总体上表现为稳定滑动,西段表现为多期间歇性活动,中、东段表现为持续性活动,更早时期存在直抵地表的快速错动。  相似文献   

5.
地貌和新近系位错测量的方法是获得活动断裂在新近纪晚期以来可靠和准确的运动学数据的正确方法,本文结合遥感、地貌、变形测量与新近纪测年等手段,重点研究了伊犁盆地喀什河断裂中更新世以来的垂直活动速率.喀什河断裂在中更新世以来的新活动主要表现在河流阶地和地层的位错,综合研究了这些位错数据,分析了断裂各段在中更新世以来的活动速率,讨论了1812年尼勒克地震的平均位错反映断裂现今最新的活动速率,提供了喀什河断裂中更新世以来不同时期活动的定量数据,填补了天山内部新近纪晚期研究的部分空白,对现今地壳运动与地球动力学研究及减轻地质灾害有重要意义.  相似文献   

6.
喀什河断裂中更新世以来的活动速率研究   总被引:1,自引:0,他引:1  
利用地貌和新近系位错测量的方法,结合遥感、地貌、变形测量与新近纪测年等手段,重点研究了伊犁盆地喀什河断裂中更新世以来的垂直活动速率。喀什河断裂在中更新世以来的新活动主要表现在河流阶地和地层的位错,综合研究了这些位错数据,分析了断裂各段在中更新世以来的活动速率,讨论了1812年尼勒克地震的平均位错反映的断裂现今最新的活动速率,提供了喀什河断裂中更新世以来不同时期活动的定量数据,填补了天山内部新近纪晚期研究的部分空白,对现今地壳运动与地球动力学研究及减轻地质灾害有重要意义。  相似文献   

7.
西秦岭北缘断裂带是青藏高原东缘一条大型左旋走滑活动断裂带和历史强震带。前人对该断裂漳县以西段曾开展过大量研究工作,获得其最新构造活动的地质地貌证据,而中段(武山—天水段)和东段(天水—宝鸡段)最新活动时代一直存在分歧。基于高分辨率卫星影像解译、地质地貌调查与综合分析、探槽开挖和~(14)C测年等方法,对西秦岭北缘断裂带武山—天水段进行详细研究,结果表明:该段断裂晚第四纪以来活动显著,地貌上主要表现为断层垭口、断层沟槽、山脊与水系及阶地同步左旋位错、断层陡坎等;多个探槽剖面及测年结果显示其最新构造活动断错了全新世地层,为该段断裂全新世活动和大震危险性分析提供了新的证据。  相似文献   

8.
郯庐断裂带沂沭段最新活动的断层一般称之为F5断层,分布于潍坊至嘉山一带,长约360km。郯庐断裂带宿迁段F5断裂的准确位置、活动时代一直以来存在较大的不确定性。文中通过浅层地震勘探对F5断裂进行了系统性勘探,获取了准确的定位及其断裂发育特征。结果表明,F5断裂并未终止于原来认定的宿迁市环城南路处,而是继续向南延伸;F5断裂主要由2条相向而倾、近直立发育的主干断裂组成;在三棵树乡附近,F5断裂由3条断裂组成,且呈右阶排列,阶区长度约6km,宽度约2.5km,形成小的拉分盆地,控制了新近纪以来地层的沉积。结合钻孔联合剖面和槽探结果,判断F5断裂西边界断裂为全新世活动断裂,东边界断裂为晚更新世活动断裂,总体认为F5断裂为全新世活动断裂。  相似文献   

9.
滇西北通甸-巍山断裂中段的晚第四纪滑动速率   总被引:2,自引:0,他引:2       下载免费PDF全文
通甸-巍山断裂属于红河断裂带的分支断裂,目前对该断裂中段的晚第四纪活动特征研究较少。野外地质地貌调查和年代学研究结果表明,通甸-巍山断裂中段是以右旋走滑运动为主,兼有张性正断的全新世活动断裂,其最新活动时代距今约2.2ka。晚更新世中晚期以来断裂中段平均水平滑动速率为1.25mm/a,全新世晚期以来垂直运动趋于增强。该研究不仅为该断裂的地震危险性评价工作提供了基础资料,而且有助于理解川滇菱形块体西南边界构造变形的空间分配特点  相似文献   

10.
向志勇  沈军  李军  吴传勇 《内陆地震》2009,23(2):215-225
乌鲁木齐市雅玛里克断裂是博格达弧形构造第二排断裂的西翼尾段部分.断裂从乌鲁木齐市中部通过,基本由两条断层构成,断裂构造地貌明显,断裂带的宽度可达百余米.通过该断裂错动第四纪地层和变动地貌面的反复勘察,大量断层地质剖面的观察,与断层活动相关的第四纪堆积物的年代测定,经分析认为雅玛里克断裂最新活动时代具有"西老东新"空间变化特点.断裂活动时代大体分为3段:葛家沟以西至雅玛里克山西北麓,为中更新世晚期活动;葛家沟以东到铁厂沟,为晚更新世活动;铁厂沟以东为全新世活动.  相似文献   

11.
东秦岭铁炉子断裂的新活动特征   总被引:3,自引:0,他引:3       下载免费PDF全文
描述了东秦岭山地铁炉子断裂新活动的方式、表现以及断裂所在地区的新构造应力场。从河流阶地所反映的断裂在水平方向和垂直方向上的错距和错动速率看 ,铁炉子断裂的新活动主要表现为左旋走滑活动 ,其水平活动规模比垂直活动大一个数量级 ;该断裂垂直活动比较明显的地方是沿盆地发育的地段 ;断裂活动有加速的趋势。铁炉子断裂的新活动方式很可能是由于印度板块向北碰撞挤入欧亚板块及由此造成青藏高原隆起 ,使中国东部地块向东或东南方向差异性滑移的结果  相似文献   

12.
On the basis of dividing and comparison of the Neogene strata and their bottoms revealed by 7 drill holes in Taikang area, we completed 101 seismic profiles with a total length of 4991km. Seismic data were compared and interpreted. The results indicate that Xinzheng-Taikang Fault, as a blind fault extending from Xinzheng to Taikang, which was considered as an EW striking fault from Xuchang to Taikang before, is the boundary of Taikang uplift and Zhoukou depression, controlling the sedimentation since Neogene Period. So we named the fault the Xinzheng-Taikang Fault, which is composed of two branches, mainly, the east and west branches. The west branch strikes northwest, dipping northeast with steep angles, and the fault plane extending more than 140km in length. As revealed on the seismic profiles, the eastern segment of the west branch is normal fault, while the west segment of the branch shows characteristics of strike-slip fault. The east branch trends NW-NEE, dipping SW-SSE with the length of about 50km. Two branches form a minus flower structure, indicating the strike slip-extension tectonic background. The bottom of Neogene strata is offset about 120m by the east branch, 20m by the west branch, and the bottom of Quaternary is probably offset too. Meanwhile, latest studies suggest that the composite strip of the two branches of Xinzheng-Taikang Fault, which is a tectonic transfer zone, is the subduction zone between the two strike-slip faults. The tectonic stress tends to be released by the east-west branch fault, and the zone should be the seismogenic structure for the recent seismicity in Taikang area. In 2010, the latest earthquake ofMS4.7 occurred in this area, causing 12 people wounded. The seismogenic structure was considered to be the Xinzheng-Taikang Fault. So locating the fault exactly is of great importance to disaster prevention.  相似文献   

13.
The Daxing Fault is an important buried fault in the Beijing sub-plain, which is also the boundary fault of the structural unit between Langgu sub-sag and Daxing sub-uplift. So far, there is a lack of data on the shallow tectonic features of the Daxing Fault, especially for the key structural part of its northern section where it joins with the Xiadian Fault. In this paper, the fine stratigraphic classifications and shallow tectonic features of the northern section in the main Daxing Fault are explored by using three NW-trending shallow seismic reflection profiles. These profiles pass through the Daxing earthquake(M6¾)area in 1057AD and the northern section of the main Daxing Fault. The results show that seven strong reflection layers(T01—T03, TQ and T11—T13)are recognized in the strata of Neogene and Quaternary beneath the investigated area. The largest depth of strong reflection layer(T13)is about 550~850ms, which is interpreted as an important surface of unconformity between Neogene and Paleogene or basement rock. The remaining reflection layers, such as T01 and TQ, are interpreted as internal interfaces in Neogene to Quaternary strata. There are different rupture surfaces and slip as well as obviously different structural features of the Daxing Fault revealed in three shallow seismic reflection profiles. The two profiles(2-7 and 2-8)show obvious rupture surfaces, which are the expression of Daxing Fault in shallow strata. Along the profile(2-6), which is located at the end of the Daxing fault structure, a triangle deformation zone or bending fracture can be identified, implying that the Daxing Fault is manifested as bending deformation instead of rupture surfaces at its end section. This unique structural feature can be explained by a shearing motion at the end of extensional normal fault. Therefore, the Daxing Fault exhibits obviously different tectonic features of deformation or displacement at different structural locations. The attitude and displacement of the fault at the shallow part are also different to some extent. From the southwest section to the northeast section of the fault, the dip angle gradually becomes gentler(80°~60°), the upper breakpoint becomes deeper(160~600m), and the fault displacement in Neogene to Quaternary strata decreases(80~0m). Three shallow seismic reflection profiles also reveal that the Daxing Fault is a normal fault during Neogene to early Quaternary, and the deformation or displacement caused by the activity of the fault reaches the reflection layer T02. This depth is equivalent to the sedimentary strata of late Early-Pleistocene. Therefore, the geometry and morphology of the Daxing Fault also reveal that the early normal fault activity has continued into the Early Pleistocene, but the evidence of activity is not obvious since the late Pleistocene. The earthquakes occurring along the Daxing Fault, such as Daxing earthquake(M6¾)in 1057AD, may not have much relation with this extensional normal fault, but with another new strike-slip fault. A series of focal mechanism solutions of modern earthquakes reveal that the seismic activity is closely related to the strike-slip fault. The Daxing Fault extends also downwards into the lower crust, and may be cut by the steeply dipping new Xiadian Fault on deep seismic reflection profile. The northern section of the Daxing Fault strikes NNE, with a length of about 23km, arranged in a right step pattern with the Xiadian Fault. Transrotational basins have been developed in the junction between the northern Daxing Fault and the southern Xiadian Fault. Such combined tectonic features of the Daxing Fault and Xiadian Fault evolute independently under the extensional structure background and control the development of the Langgu sub-sag and Dachang sub-sag, respectively.  相似文献   

14.
The 2008 Wenchuan earthquake occurred along the Longmen Shan fault zone, only five years later, another M7 Lushan earthquake struck the southern segment where its seismic risk has been highly focused by multiple geoscientists since this event. Through geological investigations and paleoseismic trenching, we suggest that the segment along the Shuangshi-Dachuan Fault at south of the seismogenic structure of the Lushan earthquake is active during Holocene. Along the fault, some discontinuous fault trough valleys developed and the fault dislocated the late Quaternary strata as the trench exposed. Based on analysis of historical records of earthquakes, we suggest that the epicenter of the 1327 Tianquan earthquake should be located near Tianquan and associated with the Shuangshi-Dachuan Fault. Furthermore, we compared the ranges of felt earthquakes(the 2013 M7 Lushan earthquake and the 1970 MS6.2 Dayi earthquake)and suggest that the magnitude of the 1327 Tianquan earthquake is more possible between 6½ and 7. The southern segment of the Longmen Shan fault zone behaves as a thrust fault system consisting of several sub-paralleled faults and its deep structure shows multiple layers of decollement, which might disperse strain accumulation effectively and make the thrust system propagate forward into the foreland basin, creating a new decollement on a gypsum-salt bed. The soft bed is thick and does not facilitate to constrain fault deformation and accumulate strain, which produces a weak surface tectonic expression and seismic activity along the southern segment, this is quite different from that of the middle and northern segments of the Longmen Shan fault zone.  相似文献   

15.
Running across the urban areas of Changzhou, Wuxi and Suzhou, the NW-trending Su-Xi-Chang Fault is an important buried fault in Yangtze River Delta. In the respect of structural geomorphology, hilly landform is developed along the southwest side of the Su-Xi-Chang Fault, and a series of lakes and relatively low-lying depressions are developed on its northeast side, which is an important landform and neotectonic boundary line. The fault controlled the Jurassic and Cretaceous stratigraphic sedimentary and Cenozoic volcanic activities, and also has obvious control effects on the modern geomorphology and Quaternary stratigraphic distribution. Su-Xi-Chang Fault is one of the target faults of the project "Urban active fault exploration and seismic risk assessment in Changzhou City" and "Urban active fault exploration and seismic risk assessment in Suzhou City". Hidden in the ground with thick cover layer, few researches have been done on this fault in the past. The study on the activity characteristics and the latest activity era of the Su-Xi-Chang Fault is of great significance for the prevention and reduction of earthquake disaster losses caused by the destructive earthquakes to the cities of Changzhou, Wuxi and Suzhou. Based on shallow seismic exploration and drilling joint profiling method, Quaternary activities and distribution characteristics of the Su-Xi-Chang Fault are analyzed systematically. Shallow seismic exploration results show that the south branch of the Su-Xi-Chang Fault in Suzhou area is dominated by normal faulting, dipping to the north-east, with a dip angle of about 60° and a displacement of 3~5m on the bedrock surface. The north branch of the Su-Xi-Chang Fault in Changzhou area is dominated by normal faulting, dipping to the south, with a dip angle of about 55°~70° and a displacement of 4~12m on the bedrock surface. All breakpoints of Su-Xi-Chang Fault on the seismic exploration profiles show that only the bedrock surface was dislocated, not the interior strata of the Quaternary. On the drilling joint profile in the Dongqiao site of Suzhou, the latest activity of the south branch of Su-Xi-Chang Fault is manifested as reverse faulting, with maximum displacement of 2.9m in the upper part of Lower Pleistocene, and the Middle Pleistocene has not been dislocated by the fault. The fault acts as normal fault in the Pre-Quaternary strata, with a displacement of 3.7m in the Neogene stratum. On the drilling joint profile in the Chaoyang Road site of Changzhou, the latest activity of the north branch of Su-Xi-Chang Fault is manifested as reverse faulting too, with maximum displacement of 2.8m in the bottom layer of the Middle Pleistocene. The fault acts as normal fault in the Pre-Quaternary strata, with a displacement of 10.2m in the bedrock surface. Combining the above results, we conclude that the latest activity era of Su-Xi-Chang Fault is early Middle Pleistocene. The Su-Xi-Chang Fault was dominated by the sinistral normal faulting in the pre-Quaternary period, and turned into sinistral reverse faulting after the early Pleistocene, with displacement of about 3m in the Quaternary strata. The maximum magnitude of potential earthquake on the Su-Xi-Chang Fault is estimated to be 6.0.  相似文献   

16.
The relationship between the latest activity of active fault and seismic events is of the utmost importance. The Tan-lu fault zone in eastern China is a major fault zone, of which the active characteristics of the segments in Jiangsu, Shandong and Anhui has been the focus of research. This study takes the Dahongshan segment of the Tanlu Fault in Sihong County as the main research area. We carried out a detailed geological survey and excavated two trenches across the steep slope on the southwest side of the Dahongshan. Each trench shows fault clearly. Combining the comparative analysis of previous work, we identified and cataloged the late Quaternary deformation events and prehistoric earthquake relics, and analyzed the activity stages and behavior of this segment. Fault gonge observed in the trench profiles shows that multiple earthquake events occurred in the fault. The faulting dislocated the Neogene sandstone, black gravel layer and gray clay layer. Brown clay layer is not broken. According to the relations of dislocated stratums, corresponding 14C and OSL samples were collected and dated. The result indicates that the Dahongshan segment of the Tanlu Fault has experienced strong earthquakes since the late Quaternary. Thrust fault, normal fault and strike-slip fault are found in the trenches. The microscopic analysis of slices from fault shows that there are many stick-creep events taking place in the area during the late Quaternary. Comprehensive analysis shows that there have been many paleoearthquakes in this region since the late Quaternary, the recent active time is the late Pleistocene, and the most recent earthquake event occurred in(12~2.5ka BP). The neotectonic activity is relatively weak in the Anhui segment(south of the Huaihe River)of Tanlu fault zone. There are difficulties in the study of late Quaternary activity. For example, uneven distribution of the Quaternary, complex geological structure, larger man-made transformation of surface and so on. The progressive research may be able to promote the study on the activity of the Anhui segment of Tanlu fault zone.  相似文献   

17.
It is well known that the slip rate of Kunlun Fault descends at the east segment, but little known about the Awancang Fault and its role in strain partitioning with Kunlun Fault. Whether the sub-strand(Awancang Fault) can rupture simultaneously with Kunlun Fault remains unknown. Based on field investigations, aerial-photo morphological analysis, topographic surveys and 14C dating of alluvial surfaces, we used displaced terrace risers to estimate geological slip rates along the Awancang Fault, which lies on the western margin of the Ruoergai Basin and the eastern edge of the Tibetan plateau, the results indicate that the slip rate is 3mm/a in the middle Holocene, similar to the reduced value of the Kunlun Fault. The fault consists of two segments with strike N50° W, located at distance about 16km, and converged to single stand to the SE direction. Our results demonstrate that the Awancang fault zone is predominantly left-lateral with a small amount of northeast-verging thrust component. The slip rates decrease sharply about 4mm/a from west to east between the intersection zone of the Awancang Fault and Kunlun Fault. Together with our previous trenching results on the Kunlun Fault, the comparison with slip rates at the Kunlun fault zone suggests that the Awancang fault zone has an important role in strain partitioning for east extension of Kunlun Fault in eastern Tibet. At the same time, the 15km long surface rupture zone of the southeast segment was found at the Awancang Fault. By dating the latest faulted geomorphologic surface, the last event may be since the 1766±54 Cal a BP. Through analysis of the trench, there are four paleoearthquake events identified recurring in situ on the Awancang Fault and the latest event is since (850±30)a BP. The slip rate of the Awancang Fault is almost equivalent to the descending value of the eastern part of the east Kunlun Fault, which can well explain the slip rate decreasing of the eastern part of the east Kunlun Fault(the Maqin-Maqu segment)and the characteristics of the structure dynamics of the eastern edge of the Tibet Plateau. The falling slip rate gradient of the eastern Kunlun Fault corresponds to the geometric characteristic. It is the Awancang Fault, the strand of the East Kunlun Fault that accommodates the strain distribution of the eastward extension of the east Kunlun Fault. This study is helpful to seismic hazard assessment and understanding the deformation mechanism in eastern Tibet.  相似文献   

18.
南黄海北部千里岩断裂活动性初探   总被引:3,自引:1,他引:2  
在南黄海北部海域首次针对千里岩断裂进行了声波探测。根据声波反射剖面所显示的晚第四纪断裂活动性差异,大致以朝连岛断裂为界,可把千里岩断裂分为2段,南段晚更新世以来不活动,在日照东南海域跨断裂的声波剖面上晚更新世地层没有受到断层错断的影响;北段在晚更新世晚期活动,从千里岩岛西侧至石岛湾以东海域,在声波剖面上可见多处上更新统中上部地层错断现象。虽然自建立测震台网以来沿千里岩断裂及附近海域内尚未发生5级及以上地震,也未见小震丛集现象,但是,千里岩断裂的晚更新世活动段长度>100km,具有发生6·5级左右地震的可能性,在地震预报和地震危险性分析中值得进一步研究  相似文献   

19.
Anqiu-Juxian Fault is an important fault in the Tanlu fault zone, with the largest seismic risk, the most recent activity date and the most obvious surface traces. It is also the seismogenic fault of the Tancheng M8 1/2 earthquake in 1668. There are many different views about the southern termination location of surface rupture of the Tancheng earthquake and the Holocene activity in Jiangsu segment of this fault. Research on the latest activity time of the Jiangsu segment of Anqiu-Juxian Fault, particularly the termination location of surface rupture of the Tancheng earthquake, is of great significance to the assessment of its earthquake potential and seismic risk. Based on trench excavation on the Jiangsu segment of Anqiu-Juxian Fault, we discuss the time and characteristics of its latest activity. Multiple geological sections from southern Maling Mountain to Chonggang Mountain indicate that there was an ancient seismic event occurring in Holocene on the Jiangsu segment of Anqiu-Juxian Fault. We suggest the time of the latest seismic event is about(4.853±0.012)~(2.92±0.3)ka BP by dating results. The latest activity is characterized by thrust strike-slip faulting, with the maximum displacement of 1m. Combined with the fault rupture characteristics of each section, it is inferred that only one large-scale paleo-earthquake event occurred on the Jiangsu segment of Anqiu-Juxian Fault since the Holocene. The upper parts of the fault are covered by horizontal sand layers, not only on the trench in the west of Chonggang mountain but also on the trench in Hehuan Road in Suqian city, which indicates that the main part of the Jiangsu segment of Anqiu-Juxian Fault was probably not the surface rupture zone of the 1668 Tancheng M8 1/2 earthquake. In short, the Jiangsu segment of Anqiu-Juxian Fault has experienced many paleo-earthquake events since the late Pleistocene, with obvious activity during the Holocene. The seismic activities of the Jiangsu segment of Anqiu-Juxian Fault have the characteristics of large magnitude and low frequency. The Jiangsu segment of Anqiu-Juxian Fault has the deep tectonic and seismic-geological backgrounds of big earthquakes generation and should be highly valued by scientists.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号