共查询到20条相似文献，搜索用时 15 毫秒
1.
2.
为讨论近断层地震动下摇摆-自复位(Rocking Self-Centering, RSC)桥墩连续梁的地震反应及其抗震优缺点。基于OpenSees有限元分析平台讨论了RSC桥墩三维建模方法，通过对6个试验构件的模拟，比较模拟与试验桥墩滞回曲线、预应力筋最大应力等指标，验证了模型准确性。建立设置RSC桥墩和普通钢筋混凝土(Reinforced Concrete, RC)桥墩的上部结构相同的两座连续梁桥，输入3组含有强速度脉冲的近断层地震波进行非线性动力时程分析，对比其抗震性能。结果表明：在0.4 g近断层地震动下，RSC桥墩与普通RC桥墩相比，RSC桥墩的最大位移角为普通RC桥墩的78.1%～97.6%,墩底曲率延性系数仅为普通RC桥墩的24.0%～34.0%,减小了桥墩的最大变形，也减轻了桥墩地震损伤，不利的一点是使用RSC桥墩会导致支座位移增大。RSC桥墩震后的残余位移较小，且预应力筋处于弹性受力阶段，为实现震后桥梁功能的快速恢复提供了条件。 相似文献
3.
Reinforced concrete (RC) wall is a common type of structural component used in high-rise buildings to resist lateral loads induced by earthquakes. RC walls are typically designed and detailed to dissipate energy through significant inelastic responses to meet expected seismic performance under moderate-to-strong earthquakes. However, costly repair or even demolition caused by excessive residual deformation is usually inevitable. Given this deficiency, this study investigates the feasibility of utilizing superelastic shape memory alloy (SMA) bars to achieve self-centering (SC) RC walls. Under this condition, the residual deformation of SC–RC walls is reduced by superelastic SMA with large recoverable strain and remarkable fatigue properties. The mechanical properties of superelastic nickel–titanium bars and SC–RC wall design are described. A numerical SC–RC wall model is developed and validated by comparing the test results. Parametric studies of SC–RC wall systems are then conducted to investigate the effects of axial compressive load ratio, bottom slit length, and lower plateau stress factor of SMA. Results show that the proposed SC–RC walls have excellent SC ability and moderate energy dissipation capacity. The damage regions and levels of the SC–RC wall systems are also discussed. 相似文献
4.
为研究竖向压应力和高宽比对砖墙体抗震性能的影响,以砖墙体抗震承载力典型试验试件为基础,利用有限元分析软件ANSYS建立适当的空间模型。根据砖墙体的破坏模式和材料性能把墙体划分成块体单元、灰缝单元以及接触单元,为各部分材料选用不同的本构关系模型与破坏准则。并将计算结果与试验结果进行对比,验证文中模型的可适用性。选用经验证后的模型,变换竖向压应力和高宽比,得出相应的结论:墙体的开裂荷载和抗侧承载力随着高宽比的增大明显呈降低的趋势;不同高宽比的墙体,竖向压应力的影响规律不尽相同。 相似文献
5.
Earthquake investigations have illustrated that even code-compliant reinforced concrete frames may suffer from soft-story mechanism. This damage mode results in poor ductility and limited energy dissipation. Continuous components offer alternatives that may avoid such failures. A novel infilled rocking wall frame system is proposed that takes advantage of continuous component and rocking characteristics. Previous studies have investigated similar systems that combine a reinforced concrete frame and a wall with rocking behavior used. However, a large-scale experimental study of a reinforced concrete frame combined with a rocking wall has not been reported. In this study, a seismic performance evaluation of the newly proposed infilled rocking wall frame structure was conducted through quasi-static cyclic testing. Critical joints were designed and verified. Numerical models were established and calibrated to estimate frame shear forces. The results evaluation demonstrate that an infilled rocking wall frame can effectively avoid soft-story mechanisms. Capacity and initial stiffness are greatly improved and self-centering behavior is achieved with the help of the infilled rocking wall. Drift distribution becomes more uniform with height. Concrete cracks and damage occurs in desired areas. The infilled rocking wall frame offers a promising approach to achieving seismic resilience. 相似文献
6.
Xia Xiushen Wu Suiwen Shi Jun Jia Junfeng Chen Xingchong Ma Huajun 《地震工程与工程振动(英文版)》2020,19(4):1005-1015
In this study, sacrificial components were incorporated into self-centering railway bridge piers to improve the lateral stiffness. The seismic response of this new detail was investigated. First, the method to compute the initial uplift moment of the self-centering pier is given. In addition, shaking table tests were conducted on a free-rocking pier without sacrificial components, which was used to validate a two-spring numerical model. Good agreement was obtained between the numerical results and experimental data. Furthermore, the validated model was employed to investigate the influence of sacrificial components on the seismic response of rocking piers. For this purpose, two models were developed, with and without sacrificial components. Nonlinear response history analysis was then performed on both models under three historical motions. The results showed that compared to the one without sacrificial components, the rocking pier with sacrificial components has comparable displacement at the top of the pier, and maximum uplift moment at high amplitude motion. Therefore, incorporating sacrificial components into the rocking pier can increase the lateral stiffness at service load and low amplitude frequent earthquakes but can produce comparable response at high seismic excitation. These results provide support for performance-based seismic design of self-centering rocking piers.
相似文献7.
为探讨自复位桥墩的地震反应，以某简支梁桥为工程背景，设计并制作了一个缩尺的模型桥梁。通过白噪声扫频获得了自复位桥墩的动力特性及其变化规律，选取El-Centro、Mexico和Chi-Chi强震记录作为地震动输入，进行振动台模型试验。试验记录了墩顶的加速度和位移反应，考查了地震动强度、频谱特性及预应力钢筋及其初始预加力对模型桥墩动力特性及摇摆反应的影响。试验结果表明:墩顶水平加速度反应随地震动强度及初始预加力的提高而增大，墩顶位移反应受地震动的强度、频谱特性及初始预加力大小影响较大。墩底提离面轻微损伤会明显降低体系的整体水平刚度，初始预加力则能提高体系整体水平刚度，桥墩的阻尼比随体系的水平刚度增大而减小。强震下自复位桥墩发生了预期的提离摇摆，震后墩底提离面出现轻微损伤，墩身无裂缝产生，结构具有良好的抗震及自复位性能。振动台试验结果验证已有文献的数值分析结论，振动台试验数据可用于数值模型校核或修正。 相似文献
8.
型钢混凝土剪力墙是一种广泛应用于高层混合结构中的剪力墙形式。本文采用通用有限元程序ADINA,以边缘构件含钢率为主要参数,对不同剪跨比的几组剪力墙承载力和变形能力进行了分析,并与考虑了剪力墙混凝土等级、轴压比、配筋率和边缘约束指标等参数影响的剪力墙性能进行了比较研究。结果表明,在高层结构中采用较高强度的混凝土是有利的,但剪力墙的轴压比需要严格限制,且墙体配筋率并不是提高其抗震性能的有效手段。在高层混合结构剪力墙中,通过边缘构件设置型钢可有效增加墙体延性,且边缘约束构件的约束指标可取0.32左右。 相似文献
9.
2022年1月8日门源M6.9地震造成山丹明长城局部破坏。为研究此次地震作用下夯土城墙的动力响应与破坏特征，基于地震现场考察结果，采用振幅等效处理后的记录地震波为输入地震动，开展双向地震荷载作用下夯土城墙的动力响应数值分析，研究不同位置测点的最大位移、峰值加速度与墙体应力分布特征，探讨地震导致夯土城墙破坏的主要内因。研究结果表明：双向地震荷载作用下，墙体位移和峰值加速度(PGA)随着高度的增加逐渐增加，但距墙体底部0.5 m高度范围内PGA放大效应不明显，最大位移、加速度均出现在墙体顶部裂缝位置处；水平地震荷载作用下墙体的地震动响应更为显著；墙体的最大主应力、最大剪应力均出现在有裂缝处的底端掏蚀悬空部位，墙体裂缝、夯筑搭接、掏蚀悬空处应力集中明显；裂缝对夯土城墙的地震动放大效应在一定高度范围内表现为弱化作用，但随高度增加逐渐过渡为强化作用；裂缝可显著增强墙体顶部地震动响应，可能是本次地震诱发城墙破坏的主要内因。研究成果可为古城墙遗址的加固修缮提供科学指导。 相似文献
10.
基于韧性设计的一种地下框架结构抗震新体系研究 总被引：2，自引：2，他引：0
具有功能可快速恢复的抗震结构体系是结构抗震韧性设计的目标，结合浅埋地下框架结构地震破坏和失效模式的震害事例调查与分析以及抗震韧性结构设计的思想，本文提出一种可控制失效模式并具备自复位能力的浅埋地下框架结构抗震新体系。采用数值分析方法研究了传统地下框架结构体系与本文提出的新体系间的抗震能力差异以及新体系的自复位效果。结果表明:与传统的地下框架结构体系相比，新型地下框架结构体系的抗震能力显著提升，并具备良好的自复位能力，实现了结构抗震韧性设计的目标；新体系的自复位效果随轴压比的增加逐渐变差。结合算例，给出了浅埋地下框架结构自复位最大变形能力与轴压比的经验关系。 相似文献
11.
The seismic performance of a self-centering precast reinforced concrete (RC) frame with shear walls was investigated in this paper. The lateral force resistance was provided by self-centering precast RC shear walls (SPCW), which utilize a combination of unbonded prestressed post-tensioned (PT) tendons and mild steel reinforcing bars for flexural resistance across base joints. The structures concentrated deformations at the bottom joints and the unbonded PT tendons provided the self-centering restoring force. A 1/3-scale model of a five-story self-centering RC frame with shear walls was designed and tested on a shake-table under a series of bi-directional earthquake excitations with increasing intensity. The acceleration response, roof displacement, inter-story drifts, residual drifts, shear force ratios, hysteresis curves, and local behaviour of the test specimen were analysed and evaluated. The results demonstrated that seismic performance of the test specimen was satisfactory in the plane of the shear wall; however, the structure sustained inter-story drift levels up to 2.45%. Negligible residual drifts were recorded after all applied earthquake excitations. Based on the shake-table test results, it is feasible to apply and popularize a self-centering precast RC frame with shear walls as a structural system in seismic regions. 相似文献
12.
为了研究设窗洞的蒸压加气混凝土砌块砌体承重墙的抗震性能,运用ABAQUS有限元分析软件对其进行了非线性分析。首先将有限元模型的计算结果与足尺试件的试验结果进行了对比验证,在此基础上,通过改变墙体的竖向压应力、水平配筋和开洞大小,研究了这些参数对墙体抗震性能的影响。研究表明:随着竖向压应力的增大,墙体水平承载力提高,而极限变形能力则有降低趋势;水平配筋可以提高墙体的承载力和变形性能;增大洞口水平尺寸导致极限承载力明显降低,而对其相应位移的影响则小得多。 相似文献
13.
Farhad Dashti Rajesh P. Dhakal Stefano Pampanin 《Bulletin of Earthquake Engineering》2018,16(1):427-458
This paper describes the blind prediction carried out to simulate the response of a thin reinforced concrete wall tested under uni-directional (in-plane) quasi-static reverse cyclic loading. The specimen was a singly reinforced T-shaped wall panel with a shear-span ratio of 3.7. The response of the test specimen was simulated prior to the release of test results using a finite element model which had already been verified for its capabilities in capturing different failure patterns of rectangular walls, particularly out-of-plane instability. The numerical model predicted a flexural dominated response for the specimen accompanied by considerable out-of-plane deformations. The blind prediction report, submitted in advance to the principal investigator of the experimental campaign, included lateral load-top displacement response of the specimen, maximum out-of-plane deformation corresponding to each drift level, evolution of out-of-plane displacements throughout in-plane loading, response of the longitudinal reinforcement at the section exhibiting the maximum out-of-plane deformation, and von Mises as well as reinforcement stress distribution at some key points of the wall response. Furthermore, a parametric study was carried out addressing the effects of shear-span ratio, reinforcement eccentricity and axial load ratio on the wall response. Results of the numerical simulation that had been included in the blind prediction report have been compared with the experimental measurements indicating that the evolution of the out-of-plane deformation was well captured by the model. 相似文献
14.
As a result of rapid economic growth and urbanization in the past two decades,many tall buildings have been constructed in China Mainland,offering researchers and practitioners an excellent opportunity for research and practice in the field of structural engineering. This paper reviews progress by researchers throughout China Mainland on the seismic research of tall buildings,focusing on three major topics that impact the seismic performance of tall buildings. These are:(1) new types of steel-concrete composite structural members such as steel-concrete composite shear walls and columns,(2) earthquake resilient shear wall structures such as shear walls with replaceable structural components,self-centering shear walls and rocking walls,and(3) performance-based seismic design,including seismic performance index,performance level and design method. The paper concludes by presenting future research needs and directions in this field. 相似文献
15.
Reinforced concrete shear walls are used because they provide high lateral stiffness and resistance to extreme seismic loads. However, with the increase in building height, these walls have become slenderer and hence responsible of carrying larger axial and shear loads. Because 2D/3D finite element inelastic models for walls are still complex and computationally demanding, simplified but accurate and efficient fiber element models are necessary to quickly assess the expected seismic performance of these buildings. A classic fiber element model is modified herein to produce objective results under particular loading conditions of the walls, that is, high axial loads, low axial loads, and nearly constant bending moment. To make it more widely applicable, a shear model based on the modified compression field theory was added to this fiber element. Consequently, this paper shows the formulation of the proposed element and its validation with different experimental results of cyclic tests reported in the literature. It was found that in order to get objective responses in the element, the regularization techniques based on fracture energy had to be modified, and nonlinearities because of buckling and fracture of steel bars, concrete crushing, and strain penetration effects were needed to replicate the experimental cyclic behavior. Thus, even under the assumption of plane sections, which makes the element simple and computationally efficient, the proposed element was able to reproduce the experimental data, and therefore, it can be used to estimate the seismic performance of walls in reinforced concrete buildings. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
16.
Dynamic response analysis of solitary flexible rocking bodies: modeling and behavior under pulse‐like ground excitation 
下载免费PDF全文
下载免费PDF全文 Results obtained for rigid structures suggest that rocking can be used as seismic response modification strategy. However, actual structures are not rigid: structural elements where rocking is expected to occur are often slender and flexible. Modeling of the rocking motion and impact of flexible bodies is a challenging task. A non‐linear elastic viscously damped zero‐length spring rocking model, directly usable in conventional finite element software, is presented in this paper. The flexible rocking body is modeled using a conventional beam‐column element with distributed masses. This model is verified by comparing its pulse excitation response to the corresponding analytical solution and validated by overturning analysis of rocking blocks subjected to a recorded ground motion excitation. The rigid rocking block model provides a good approximation of the seismic response of solitary flexible columns designed to uplift when excited by pulse‐like ground motions. Guidance for development of rocking column models in ordinary finite element software is provided. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
17.
边缘约束构件对钢筋混凝土剪力墙抗震性能的影响 总被引：6，自引：1，他引：6
钢筋混凝土剪力墙是高层建筑中的主要抗侧力构件，边缘约束情况是影响剪力墙抗震性能的一个重要因素。为研究边缘约束构件对钢筋混凝土剪力墙抗震性能的影响，本文进行了三片边缘约束情况不同的钢筋混凝土剪力墙的低周反复试验，并对试验结果进行了分析，分析内容包括：破坏形态、水平承载力、位移延性系数、刚度退化、抗震耗能能力等方面。研究结果表明，合理地设置边缘约束能够扩大塑性破坏区域，提高试件的水平承载力，改善其抗震耗能性能。研究进一步发现，边缘纵筋配筋率在提高试件的水平承载力，改善其抗震耗能性能和刚度退化程度方面影响显著，而边缘配箍率对抗震性能的贡献在本次试验分析中表现得并不明显。 相似文献
18.
The investigation of structural single rocking walls (SRWs) continues to gain interest as they produce self-centering lateral load responses with reduced structural damage. The simple rocking model with modifications has been shown to capture these responses accurately if the SRW and its underlying base are infinitely rigid. This paper advances previous rocking models by accounting for (1) the inelastic actions at or near the base of the SRW and (2) the flexural responses within the wall. Included in the proposed advancements are hysteretic and inherent viscous damping associated with these two deformation components so that the total dynamic responses of SRWs can be captured with good accuracy. A system of nonlinear equations of motion is developed, in which the rocking base is discretized into fibers using a zero-length element to locate the associated compressive deformations and damage. The flexural deformations of the rocking body are captured using an elastic term, while the impact events are modeled using impulse-momentum equations. Comparisons with experiments of structural precast concrete and masonry SRWs show that the proposed approach accurately estimates the dynamic responses of different SRWs with and without unbonded posttensioning, for various dynamic excitations and degrees of hysteretic action. Using the proposed approach, a numerical investigation employs different configurations of structural SRWs to quantify the various sources of energy loss, including hysteretic action and impact damping, during various horizontal ground motions. 相似文献
19.
为研究高落差埋地管道的地震响应,进行了高落差埋地管道振动台模型试验和有限元数值模拟,探讨管道径厚比、管道倾角、地震波入射角、地震动峰值加速度和管道埋深对高落差埋地管道地震响应的影响规律。试验结果与数值模拟结果符合较好。研究结果表明,在入射角0°的地震波作用下,高落差埋地管道轴向应变峰值随着管道径厚比的增大而增大;在一定管道倾角范围内,管道轴向应变峰值随着管道倾角α的增大而增大;当地震波入射角度从0°变化到60°时,管道上下表面的轴向应变减小,侧面的轴向应变增大;管道应变随着地震动峰值加速度和管道埋深的增加而增大;相同地震作用下,管道最大轴向应变出现在下弯管1/3处附近。 相似文献
20.
Though rocking shallow foundations could be designed to possess many desirable characteristics such as energy dissipation, isolation, and self-centering, current seismic design codes often avoid nonlinear behavior of soil and energy dissipation beneath foundations. This paper compares the effectiveness of energy dissipation in foundation soil (during rocking) with the effectiveness of structural energy dissipation devices during seismic loading. Numerical simulations were carried out to systematically study the seismic energy dissipation in structural elements and passive controlled energy dissipation devices inserted into the structure. The numerical model was validated using shaking table experimental results on model frame structures with and without energy dissipation devices. The energy dissipation in the structure, drift ratio, and the force and displacement demands on the structure are compared with energy dissipation characteristics of rocking shallow foundations as observed in centrifuge experiments, where shallow foundations were allowed to rock on dry sandy soil stratum during dynamic loading. For the structures with energy dissipating devices, about 70–90% of the seismic input energy is dissipated by energy dissipating devices, while foundation rocking dissipates about 30–90% of the total seismic input energy in foundation soil (depending on the static factor of safety). Results indicate that, if properly designed (with reliable capacity and tolerable settlements), adverse effects of foundation rocking can be minimized, while taking advantage of the favorable features of foundation rocking and hence they can be used as efficient and economical seismic energy dissipation mechanisms in buildings and bridges. 相似文献