共查询到19条相似文献，搜索用时 281 毫秒
1.
各向异性弹性波动方程多分量联合叠后逆时偏移 总被引：6，自引：1，他引：5
为了更好地描述地下介质的各向异性特性,实现准确的波场成像,开展了各向异性介质逆时偏移研究。采用高阶交错网格有限差分法推导出各向异性弹性波动方程叠后逆时深度偏移方程,证明各向异性介质向各向同性介质转化的条件,并研究Thom son参数对弹性波场的影响,合成了各向同性介质和各向异性介质多分量零偏移距剖面,实现了多分量模拟记录联合叠后逆时偏移。计算结果表明,能够准确地实现多分量波场叠后逆时成像,使地质层位中的断层、断点等目标成像清晰准确,且偏移成像精度较高,因此各向异性逆时偏移法是一种高精度的深度域偏移成像方法,可以指导实际天然地震资料和人工地震资料的数据处理。 相似文献
2.
叠前深度偏移理论及方法一直是地震数据成像中研究的热点问题.业界对单程波叠前深度偏移方法和逆时深度偏移开展了深入的研究,但对双程波方程波场深度延拓理论及成像方法的研究还鲜有报道.本文以地表记录的波场值为基础,利用单程波传播算子估计波场对深度的偏导数,为在深度域求解双程波方程提供充分的边界条件,并提出利用矩阵分解理论实现双程波方程的波场深度外推.通过对强速度变化介质中传播波场的计算,与传统的单程波偏移方法相比,本文提出的偏移方法计算的波场与常规有限差分技术计算的波场相一致,证明了本方法计算的准确性.通过对SEAM模型的成像,在相同的成像参数下,与传统的单程波偏移算法和逆时深度偏移算法方法相比,本文提出的偏移方法能够提供更少的虚假成像和更清晰的成像结果.本文所提偏移算法具有深度偏移和双程波偏移的双重特色,推动和发展了双程波叠前深度偏移的理论和实践. 相似文献
3.
Kirchhoff积分叠前时间偏移应用波动方程的Kirchhoff积分解实现地下反射层的偏移问题,该技术应用所有偏移距的地震资料,能适应纵横向速度变化较大的情况,是复杂地区地震资料成像的较理想的方法.叠前时间偏移是对偏移处理和偏移速度修改的一个迭代过程,偏移速度的精度直接影响到偏移效果.对大庆油田古龙断陷某工区的三维地震资料,应用叠前时间偏移技术进行成像处理,对于埋深较大的目的层,断陷结构复杂,介质的各向异性较为严重,所以应用考虑各向异性参数的速度修改公式,得到较为精确的偏移速度体,进而保证偏移CRP道集拉平,得到成像良好的偏移数据体.实际地震数据偏移处理结果表明叠前时间偏移技术可对复杂构造的地震数据准确成像,可在古龙地区断陷地层勘探中推广应用. 相似文献
4.
复杂构造地震成像主要取决于叠前地震数据品质、偏移速度可靠性和偏移算子成像精度. 库车坳陷异常复杂的近地表条件导致极低信噪比的地震采集数据. 该区逆冲推覆高陡构造刺穿盐体大面积分布, 盐层厚度变化大、顶底面形态复杂, 盐下断裂带破碎、小断块发育, 形成异常复杂的地震成像问题. 本文重点研究三个关键环节:(1)精细的叠前地震预处理研究: 根据该区地震地质复杂性和地震资料特征, 采用一些新的方法技术和技术组合从振幅与时移的大、中、小尺度变化三个层次来解决资料信噪比问题, 重建深部反射信号; (2)三级偏移速度分析研究:利用库车坳陷盐刺穿逆冲推覆构造建模理论及变速成图配套技术解决叠前时间偏移速度场时深转换问题,利用井约束低频速度地震迭代反演技术解决连井层速度场与偏移速度场的融合问题,实现从DMO速度分析、叠前时间偏移速度分析到叠前深度偏移速度分析的有机衔接,建立拓扑结构相对保持的叠前深度偏移速度模型;(3)基于退化Fourier偏移算子的半解析波动方程叠前时间和深度偏移研究, 极大地改善了地震偏移过程中高波数波的成像问题. 通过对库车坳陷大北、博孜、却勒、西秋4和西秋10等复杂高陡构造的叠前时间和深度偏移地震成像处理,取得了较好的应用效果. 相似文献
5.
地震资料分辨率降低,得不到深层介质的精确信息实际上是由于大地吸收效应的影响.同时与双程波动方程相比单程波动方程避免了多次波的干扰并且计算效率高、占用内存少.本文首先基于开尔芬粘弹性介质模型将品质因子与单程波分步傅立叶法波场延拓算子相结合,实现了粘弹性介质波场延拓,从而将单程波弹性介质波场延拓推广到了粘弹性介质.然后在定位原理,数学检波器原理以及等时叠加原理的基础之上实现了粘弹性介质非零偏移距叠前正演模拟.最后将数值模拟得到的正演记录进行弹性偏移和粘弹性偏移并进行对比分析.通过数值算例可以看出,粘弹性介质叠前正演深层的反射波能量减弱,同相轴变粗,频带变窄,主频减小,分辨率降低;粘弹性偏移不但实现了振幅的恢复,而且同时偏移剖面的垂向空间分辨率也得到了提高. 相似文献
6.
7.
8.
在克希霍夫叠前时间偏移处理中,地震波走时的计算方法是决定大偏移距地震资料成像品质的重要因素.在常规的三维转换波各向异性叠前时间偏移公式中,走时的计算是基于等效单层各向异性介质的非双曲线方法.用这种方法处理的成像道集,在偏移/深度比超过一定阈值后,成像道集中的反射同相轴将出现过偏现象,这种偏移不平的同相轴将影响偏移叠加的最佳响应,使得偏移成像波组呈低频化特征,最终降低三维转换波偏移成像质量.我们采用层状介质的走时计算方法代替常规算法,并且利用了常规方法的转换波各向异性偏移速度模型.基于层状介质的算法能够提高大偏移距转换波走时计算精度,克服中浅地层大偏移距远道成像道集中反射同相轴逐渐上翘的问题.两个地区的三维转换波资料处理结果证实,基于层状各向异性介质的转换波克希霍夫叠前时间偏移方法,明显改善了反射成像剖面的连续性和分辨率,提高成像剖面构造的可解释性. 相似文献
9.
10.
多分量联合逆时偏移最佳匹配层吸收边界 总被引：3，自引：2，他引：1
有限空间内的波动方程逆时偏移需要利用有效的边界处理技术用以消除人工截断对偏移结果产生的影响。本文以横向各向同性介质弹性波速度-应力方程为基础,依据传统分裂式最佳匹配层（Perfect Matched Layer,PML）吸收边界技术的思想,推导了应用于逆时偏移的完全匹配层波动方程,并给出了其高阶交错网格有限差分格式。针对由边界处向计算区域内传播的＂反射波＂,以及地震记录排列两端地震同相轴突变对计算区域的影响这两方面问题,本文给出了逆时偏移中吸收层的布设方式。模型和实际资料的弹性波叠前多分量联合逆时深度偏移结果表明本文的边界处理方法取得了较好的吸收效果,获得了好的联合偏移成像结果。 相似文献
11.
与其他偏移方法相比,逆时偏移基于精确的波动方程而不是对其近似,用时间外推来代替深度外推.因此,它具有良好的精度,不受地下构造倾角和介质横向速度变化的限制.激发时间成像条件的求取是叠前逆时偏移的难点之一,本文采用求解程函方程的方法得到地下各点的初至波走时,以此作为叠前逆时偏移的成像条件.基于任意矩形网格和局部平面波前近似的有限差分初至波走时计算方法精度较高并适用于强纵横向变速的复杂介质.试算结果表明,在复杂介质模型中利用叠前逆时深度偏移收到了很好的成像效果. 相似文献
12.
偏移成像是VSP数据处理中的一个重要环节,常规的VSP成像方法通常利用VSP-CDP转换或Kirchhoff偏移,均存在保幅性差及成像精度低等问题,而波动方程叠前深度偏移被认为是对地下复杂构造进行成像的精确偏移方法.任意广角波动方程作为一种高精度的空间域单程波波动方程,同时由于只含有二阶偏导数项,易于数值实现,与其他单程波波动方程相比,具有更大的成像倾角,因此是偏移成像的有力工具之一.本文将AWWE推广应用到VSP数据成像中,实现了VSP时空域高角度单程波方程偏移.首先从三维标量任意广角波动方程出发,推导了完全匹配层吸收边界条件,在基本不增加计算量的前提下有效地压制了边界反射成像噪音,同时利用非线性反演算法优选参考速度来提高平方根算子的近似程度,从而提高高角度地层的成像精度.模型数值模拟实验验证了该方法的有效性,同时表明该方法在陡倾角构造情况下能取得很好的成像效果.最后对某地区实际观测的VSP资料进行了偏移成像,并与地面地震偏移结果进行了对比,显示出VSP波动方程偏移在成像分辨率上的优势. 相似文献
13.
A prestack reverse-time migration algorithm which operates on common-source gathers, recorded at the Earth's surface, from 3D structures, is conceived, implemented and tested. Reverse-time extrapolation of the recorded wavefield (a boundary-value problem), and computation of the excitation-time imaging condition for each point in a 3D volume (an initial-value problem), are both performed using a second-order finite-difference solution of the full 3D scalar wave equation. The algorithm is illustrated by processing synthetic data for a point diffractor, an oblique wedge, and the French double dome and fault model. 相似文献
14.
A modified reverse-time migration algorithm for offset vertical seismic profiling data is proposed. This algorithm performs depth imaging of target areas in the borehole vicinity without taking into account the overburden. Originally recorded seismograms are used; reliable results can be obtained using only the velocity profile obtained along the well. The downgoing wavefield emitted from a surface source is approximated in the target area using the transmitted P-wave, recorded by the receivers deployed in the well. This is achieved through a reverse-time extrapolation of the direct transmitted P-wave into the target area after its separation in offset vertical seismic profiling seismograms generated using a finite-difference scheme for the solution of the scalar wave equation.
The proposed approach produces 'kinematically' reliable images from reflected PP- and PS-waves and, furthermore, can be applied as a salt proximity tool for salt body flank imaging based on the transmitted PS-waves. Our experiments on synthetic data demonstrate that the modified reverse-time migration provides reliable depth images based on offset vertical seismic profiling data even if only the velocity profile obtained along the borehole is used. 相似文献
The proposed approach produces 'kinematically' reliable images from reflected PP- and PS-waves and, furthermore, can be applied as a salt proximity tool for salt body flank imaging based on the transmitted PS-waves. Our experiments on synthetic data demonstrate that the modified reverse-time migration provides reliable depth images based on offset vertical seismic profiling data even if only the velocity profile obtained along the borehole is used. 相似文献
15.
Decoupled elastic prestack depth migration 总被引：1，自引：0，他引：1
This paper presents a new decoupled form of the formula for common-shot or common-receiver amplitude-preserving elastic prestack depth migration (PreSDM), which can be used for estimating angle-dependent elastic reflection coefficients in laterally inhomogeneous anisotropic media. The multi-shot or multi-receiver extension of this formula is suitable for automated prestack amplitude-versus-angle (AVA) elastic inversion of ocean-bottom cable (OBC), walkaway VSP (WVSP) or standard towed-cable data at any subsurface location. The essence of the theory is a systematic application of the stationary-phase principle and high-frequency approximations to the basic elastic Green's theorem. This leads to nonheuristic explicit wave mode decoupling and scalarization of vector PreSDM. Used in combination, ray-trace and finite-difference (FD) eikonal solvers create a useful tool to calculate accurate Green's function travel time and amplitude maps. Examples of synthetic OBC data and applications to field WVSP data show that the new imaging technique can produce a clear multi-mode elastic image. 相似文献
16.
Imaging the PP- and PS-wave for the elastic vector wave reverse-time migration requires separating the P- and S-waves during the wave field extrapolation. The amplitude and phase of the P- and S-waves are distorted when divergence and curl operators are used to separate the P- and S-waves. We present a P- and S-wave amplitude-preserving separation algorithm for the elastic wavefield extrapolation. First, we add the P-wave pressure and P-wave vibration velocity equation to the conventional elastic wave equation to decompose the P- and S-wave vectors. Then, we synthesize the scalar P- and S-wave from the vector Pand S-wave to obtain the scalar P- and S-wave. The amplitude-preserved separated P- and S-waves are imaged based on the vector wave reverse-time migration (RTM). This method ensures that the amplitude and phase of the separated P- and S-wave remain unchanged compared with the divergence and curl operators. In addition, after decomposition, the P-wave pressure and vibration velocity can be used to suppress the interlayer reflection noise and to correct the S-wave polarity. This improves the image quality of P- and S-wave in multicomponent seismic data and the true-amplitude elastic reverse time migration used in prestack inversion. 相似文献
17.
与地面地震资料相比,VSP资料具有分辨率高、环境噪声小及能更好地反映井旁信息等优点.常规VSP偏移主要对上行反射波进行成像,存在照明度低、成像范围受限等问题.为了增加照明度、拓宽成像范围、提高成像精度,本文采用直达波除外的所有声波波场数据(全波),包括一次反射波、多次反射波等进行叠前逆时偏移成像.针对逆时偏移中的四个关键问题,即波场延拓、吸收边界条件、成像条件及低频噪声的压制,本文分别采用自适应变空间差分算子长度的优化有限差分方法(自适应优化有限差分方法)求解二维声波波动方程以实现高精度、高效率的波场延拓,采用混合吸收边界条件压制因计算区域有限所引起的人工边界反射,采用震源归一化零延迟互相关成像条件进行成像,采用拉普拉斯滤波方法压制逆时偏移中产生的低频噪声.本文对VSP模型数据的逆时偏移成像进行了分析,结果表明:自适应优化有限差分方法比传统有限差分方法具有更高的模拟精度与计算效率,适用于VSP逆时偏移成像;全波场VSP逆时偏移成像比上行波VSP逆时偏移的成像范围大、成像效果好;相对于反褶积成像条件,震源归一化零延迟互相关成像条件具有稳定性好、计算效率高等优点.将本文方法应用于某实际VSP资料的逆时偏移成像,进一步验证了本文方法的正确性和有效性. 相似文献
18.
Based on arbitrarily wide-angle wave equations,a reverse-time propagation scheme is developed by substituting the partial derivatives of depth and time with central differences. The partial derivative of horizontal direction is replaced with high order difference. The imaging condition is computed by solving the eikonal equations. On the basis of above techniques,a prestack reverse-time depth migration algorithm is developed. The processing exam-ples of synthetic data show that the method can remove unwanted internal reflections and decrease the migration noise. The method also has the advantage of fidelity and is applicable of dip angle reflector imaging. 相似文献
19.
Jia-Jia Yang Xi-Wu Luan Bing-Shou He Gang Fang Jun Pan Wei-Min Ran Tao Jiang 《应用地球物理》2017,14(4):492-504
Angle-domain common-image gathers (ADCIGs) transformed from the shotdomain common-offset gathers are input to migration velocity analysis (MVA) and prestack inversion. ADCIGs are non-illusion prestack inversion gathers, and thus, accurate. We studied the extraction of elastic-wave ADCIGs based on amplitude-preserving elastic-wave reversetime migration for calculating the incidence angle of P-and S-waves at each image point and for different source locations. The P-and S-waves share the same incident angle, namely the incident angle of the source P-waves. The angle of incidence of the source P-wavefield was the difference between the source P-wave propagation angle and the reflector dips. The propagation angle of the source P-waves was obtained from the polarization vector of the decomposed P-waves. The reflectors’ normal direction angle was obtained using the complex wavenumber of the stacked reverse-time migration (RTM) images. The ADCIGs of P-and S-waves were obtained by rearranging the common-shot migration gathers based on the incident angle. We used a horizontally layered model, the graben medium model, and part of the Marmousi-II elastic model and field data to test the proposed algorithm. The results suggested that the proposed method can efficiently extract the P-and S-wave ADCIGs of the elastic-wave reverse-time migration, the P-and S-wave incident angle, and the angle-gather amplitude fidelity, and improve the MVA and prestack inversion. 相似文献