共查询到19条相似文献，搜索用时 171 毫秒
1.
Wheeler域储层地震预测技术研究 总被引：1，自引：0，他引：1
利用常规地震数据进行层序划分、沉积相识别、沉积演化分析及储层预测,因受现今构造趋势的影响,具有较强的多解性.Wheeler域地震资料因具有等时性,地层旋回性清楚、展布范围明了,井震标定后便于层序及体系域划分,易于识别砂体,在进行地层的沉积演化过程分析,可以在相控约束下分析砂体的分布特征、成因,评价有利储层,减少多解性.本文通过正演探讨了同一沉积模式,不同地震频率下的地震成像,研究了不同沉积模式下的Wheeler转换方法,实现了地震资料从常规时间域转换到Wheeler域.通过Wheeler域井震标定,建立起地震地质的联系;拓展性的提出了在地震最小研究单元内,在双域(常规时间域和Wheeler域)进行解释和综合研究的技术流程;建立了基于地震沉积学的储层地震预测技术.并在准噶尔盆地西缘白垩系储层研究进行了应用.经钻井证实,这种基于地震沉积学的Wheeler域储层地震预测技术比较准确,效果良好,值得完善和推广. 相似文献
2.
3.
多尺度分析方法实现了信号分析的时频局部化,是测井数据时频分析与地质解释恰当的数学工具.测井资料作为地层岩性、物性的反映,其中必然蕴含了大量与沉积地层旋回变化有关的信息.以胜坨油田某井为例,采用db4最佳小波基分别对自然伽马、自然电位和声波等测井曲线进行了多尺度分析,将一维测井数据拓展为二维深度-尺度空间,提取小波变换系数的时频色谱信息和能量信息,从而确定出测井曲线识别准层序界面的最佳尺度.依据最佳尺度下的小波系数幅度振荡特征和时频色谱信息实现了对准层序界面的自动划分,与传统方法所划分的界面基本一致.这些探索为层序地层的定量划分提供了一种新的思路. 相似文献
4.
基于非平稳信号时频分析及其地震时频属性技术应用的有关研究成果,对地震信号时频分析、分频解释与频谱分解及其在地震沉积学与地震储层成像中的应用进行系统总结与阐述.从时频分析的基本原理出发,探讨地震分频解释和频谱分解的实现方法及其在地震沉积学与储层成像中的应用策略与效果.分析指出,发展高精度时频分析理论和算法,一体化统筹谋划地震资料叠前与叠后处理解释,针对不同地质条件探索相应的时频响应规律等,是分频解释技术及其在地震沉积学和地震储层成像研究中有效应用中值得深入研究的问题. 相似文献
5.
自然伽马曲线包含丰富的地质信息，能够很好地反映由气候变化引起的地层旋回.本文采用频谱分析对柴达木盆地三湖地区第四系自然伽马测井曲线进行了系统分析.作为频谱分析方法之一的快速傅里叶变换能够将自然伽马曲线从时间（深度）域转换为频率域，然后分析每一个峰值频率的波长及其相互之间的比率关系，寻找那些波长比率与米兰柯维奇周期比率相同或相似的频率，从而捕获高频旋回信息.研究结果表明第四系地层中很好地保存了高频的米兰柯维奇旋回，这样的沉积旋回主要由地球轨道的周期性变化而导致的古气候变化引起的.偏心率周期引起的地层旋回厚度变化范围在92.00~115.00 m之间，黄赤交角引起的地层旋回厚度变化范围在24.55~63.43 m之间，岁差引起的地层旋回厚度变化范围在16.8~26.35 m之间.黄赤交角和岁差是影响该区米兰柯维奇旋回的主要因素，其中岁差的影响最大，而偏心率的影响最小. 相似文献
6.
7.
《地震地磁观测与研究》2016,(1)
地震波是一种非平稳信号,传统的傅里叶变换已不适用,时频分析方法能在时间—频率域给出非平稳信号不同时刻的频率分布特征。Wigner-Ville分布(WVD)对非平稳信号具有较好的时频聚集性,但因其为双线性变换,会产生严重的交叉干扰项。短时傅里叶变换(STFT)是一种线性变换,不存在交叉项干扰,但时频聚集性较差。考虑到二者优点,在对地震波进行时频分析时,采用短时傅里叶变换和Wigner-Ville分布的联合算法,既有效抑制了Wigner-Ville分布交叉项干扰,又保持了较高的时频聚集性。通过3种方法,对模拟信号和实际数据处理结果进行对比分析,发现联合算法对获取地震波信号的时频特征和纵波到时检测,具有更好效果。 相似文献
8.
地震信号往往是非线性非平稳的,时频分析技术能同时展示信号在时间域和频率域的局部化特征。本文研究4种时频分析方法:短时傅里叶变换(STFT)、小波变换、广义S变换和Wigner-Ville分布。在理论上运用雷克子波模拟地震记录进行时频分析对比,发现广义S变换具有相对较好的时频聚焦性以及较好的交叉项抑制性。为了验证这一理论,我们分别在两个工区做了实际的地震实验,分析并阐述4种时频分析方法的优缺点,同时也验证广义S变换的优越性。 相似文献
9.
基于Matlab软件,编制了对近震记录进行时-频分析试验研究的程序,搜集2006—2008年间首都圈地区震级介于ML2.4~2.7的5次天然地震和5次人工爆破的27个台站的宽频带记录,根据震中距离的相似性挑选5组天然地震和人工爆破地震,分析其时频特征。对于所有的数据都给出其三分向的时频图、原始波形图和频谱图,以及水平向和三分向的叠加图。分析结果表明,天然地震和人工爆破的记录具有明显不同的时频特征,天然地震的时频呈现出"多峰"特征,而人工爆破的时频分布则相对"少峰";天然地震的时频峰值分布在较宽的频率范围内,人工爆破的峰值则分布在频率较低的相对狭窄的范围内。通过以上实践,发现时频分析在分析不同时间点的频谱信息以及整个数据的时频分布特点时比傅里叶变换具有优势。 相似文献
10.
本文研究地震映像数据的时频解释方法.采用短时傅立叶变换方法获得地震映像记录频谱的时间与空间分布,根据介质对地震波频谱影响的基本规律,通过分析已知地质断面地震映像记录频谱的时间与空间分布,研究了综合利用频率域和时间域信息进行地震映像数据解释的效果.时频分析方法提取了地震波的频谱中关于地层岩性、构造方面的信息,为地震映像数据的处理和解释提供了更多的参考信息.实例证明,利用时频分析解释地震映像数据,有助于了解覆盖层下岩性变化、薄层的分布范围、探测隐伏土洞、确定混凝土构件中缺陷位置,提高地震映像数据的解释精度和准确性. 相似文献
11.
将伪随机编码技术引入到人工源电磁法后,可以通过加大发射功率以及应用后续的相关处理技术来达到压制噪声、加大探测深度及提高分辨率的目的,因此引起了越来越多学者的关注及研究,但大多数研究集中在资料处理的相关技术上,对模拟电磁信号关注较少.然而,资料处理工作大多是从电磁信号出发的,模拟伪随机编码源激发下的电磁信号不但可以为资料处理环节提供理论数据,而且可以为检测资料处理的效果提供中间结果,因此,模拟电磁信号工作必不可少.本文根据获得接收信号的物理过程来实现伪随机编码源激发下的电磁信号合成.首先用解析公式获得特定地电结构的大地频率域响应,然后通过余弦变换得到时间域阶跃响应,接下来用阶跃响应的时间导数得到大地脉冲响应,通过将大地脉冲响应与伪随机编码源的褶积得到理想接收信号,最后,用低通滤波器来模拟发射设备和接收设备的频带限制,将之和噪声一起加到理想接收信号上,最终模拟出仿真的合成信号.通过和野外实际接收信号对比发现本文合成信号仿真度较高,可以服务于后续的数据处理环节. 相似文献
12.
13.
14.
Jack Hardisty 《地球表面变化过程与地形》1993,18(9):855-862
The use of time domain and frequency domain techniques in the analysis of geomorphological time series is discussed and the techniques of spectral analysis are introduced. An Excel worksheet is used to analyse wave-current data from Slapton Sands in Devon and the advantages and limitations of the technique are listed. 相似文献
15.
We show that it is possible to estimate the background velocity for prestack depth migration in 2D laterally varying media using a non-linear optimization technique called very fast simulated annealing (VFSA). We use cubic splines in the velocity model parametrization and make use of either successive pairs of shot gathers or several constant-offset sections as input data for the inversion. A Kirchhoff summation scheme based on first-arrival traveltimes is used to migrate/model the input data during the velocity analysis. We evaluate and compare two different measures of error. The first is defined in the recorded data or (x,t) domain and is based on a reflection-tomography criterion. The second is defined in the migrated data or (x,z) domain and is based on a migration-misfit criterion. Depth relaxation is used to improve the convergence and quality of the velocity analysis while simultaneously reducing the computational cost. Further, we show that by coarse sampling in the offset domain the method is still robust. Our non-linear optimization approach to migration velocity analysis is evaluated for both synthetic and real seismic data. For the velocity-analysis method based on the reflection-tomography criterion, traveltimes do not have to be picked. Similarly, the migration-misfit criterion does not require that depth images be manually compared. Interpreter intervention is required only to restrict the search space used in the velocity-analysis problem. Extension of the proposed schemes to 3D models is straightforward but practical only for the fastest available computers. 相似文献
16.
Olu Agunloye 《Pure and Applied Geophysics》1981,119(5):1003-1023
A simple numerical inversion scheme for estimatingn-layer model parameters from observed geoelectrical resistivity data can be used in either the space or wavenumber domain. The technique utilizes Madden's Transmission Line Analogy to compute the resistivity transforms and linear filter theory to accomplish the excursions between the space and wavenumber domains. The inversion is effected by an iterative refinement scheme employing the stochastic inverse which is approximate to the generalized inverse. No singular decomposition analysis is required and the scheme is stable under ill conditions. The inversion scheme not only gives the desired estimates; it exposes redundant parameters and irrelevant data and is easily programmed on a desk-top mini computer. Examples of inverse modeling with hypothetical and field data are discussed. 相似文献
17.
《Advances in water resources》1996,19(3):181-187
Dam-break flow in channel transitions is simulated by numerically solving the system of governing two-dimensional equations. A simple algebraic coordinate transformation technique is adopted for converting the general physical domain of a transition into a rectangular computational domain. The MacCormack scheme is used for solving the transformed equations. Numerical results of the present study show satisfactory agreement with the experimental data available in the literature. They also match previous numerical results well. Effects of the contractions and expansions on the dam-break flow depth at the dam site is also studied. 相似文献
18.
H.
ZDEM
IR 《Geophysical Prospecting》1982,30(3):292-317
Wavenumber aliasing is the main limitation of conventional optimum least-squares linear moveout filters: it prevents adequate reject domain weighting for efficient coherent noise rejection. A general frequency domain multichannel filter design technique based on a one-to-one mapping method between two-dimensional (2D) space and one-dimensional (1D) space is presented. The 2D desired response is mapped to the 1D frequency axis after a suitable sorting of the coefficients. A min-max or Tchebycheff approximation to the desired response is obtained in the 1D frequency domain and mapped back to the 2D frequency domain. The algorithm is suitable for multiband 2D filter design. No aliasing damage is inherent in the linear moveout filters designed using this technique because the approximation is done in the frequency-wavenumber (f, k)-domain. Linear moveout filters designed by using the present coefficient mapping technique achieve better pass domain approximations than the corresponding conventional least-squares filters. Compatible reject domain approximations can be obtained from suitable mappings of the origin coefficient of the desired (f k)-response to the 1D frequency axis. The (fk)-responses of linear moveout filters designed by using the new technique show equi-ripple behavior. Synthetic and real data applications show that the present technique is superior to the optimum least-squares filters and straight stacking in recovering and enhancing the signal events with relatively high residual statics. Their outputs also show higher resolution than those of the optimum least-squares filters. 相似文献
19.
Application of a library based method to time domain electromagnetic data for the identification of unexploded ordnance 总被引：1，自引：1，他引：1
Leonard R. Pasion Stephen D. Billings Douglas W. Oldenburg Sean E. Walker 《Journal of Applied Geophysics》2007,61(3-4):279-291
A simple library based algorithm for the identification of unexploded ordnance is tested on time domain electromagnetic data. A library of polarization tensors is generated from data acquired on a test stand over a collection of different UXO. The objective of the algorithm is to determine which target of the library is most likely to have produced an observed data anomaly. For each target in our library a non-linear inverse problem is solved for the position and orientation that minimizes the least-squares difference between the observed data anomaly and the data predicted from each target. This technique avoids direct inversion for polarization tensor, making it feasible for cases where sensor data quality may not be sufficient to support confident estimation of model parameters. For cases where the background soil response is significant, we also invert for the t−1 decay characteristic of viscous remnant magnetic soil. We present results of preliminary tests of the library technique to Geonics EM63 time domain electromagnetic data collected on a test plot seeded with UXO. These tests demonstrate an excellent ability to accurately identify isolated targets. Misidentification of single targets occur when data anomalies have low signal to noise ratios or when targets within the library have similar polarization tensors. 相似文献