共查询到20条相似文献，搜索用时 875 毫秒
1.
Summary A land-air parametrization scheme (LAPS) describes mass, energy and momentum transfer between the land surface and the atmosphere. The scheme is designed as a software package which can be run as part of an atmospheric model or a stand-alone scheme. A single layer approach is chosen for the physical and biophysical scheme background. The scheme has six prognostic variables: two temperatures (one for the canopy vegetation and one for soil surface), one interception storage, and three soil moisture storage variables. The scheme's upper boundary conditions are: air temperature, water vapour pressure, wind speed, radiation and precipitation at some reference level within the atmospheric boundary layer. The sensible and latent heat are calculated using resistance representation. The evaporation from the bare soil is parametrized using the scheme. The soil part is designed as a three-layer model which is used to describe the vertical transfer of water in the soil.The performances of the LAPS scheme were tested using the results of meteorological measurements over a maize field at the experimental site De Sinderhoeve (The Netherlands). The predicted partitioning of the absorbed radiation into sensible and latent heat fluxes is in good agreement with observations. Also, the predicted leaf temperature agrees quite well with the observed values.With 9 Figures 相似文献
2.
The vegetated urban canopy model (VUCM) is implemented in a meteorological model, the Regional Atmospheric Modeling System (RAMS), for urban atmospheric modeling. The VUCM includes various urban physical processes such as in-canyon radiative transfer, turbulent energy exchanges, substrate heat conduction, and in-canyon momentum drag. The coupled model RAMS/VUCM is evaluated and then used to examine its impacts on the dynamic and thermodynamic structure of the urban boundary layer (UBL) in the Seoul metropolitan area. The spatial pattern of the nocturnal urban heat island (UHI) in Seoul is quite well simulated by the RAMS/VUCM. A statistical evaluation of 2-m air temperature reveals a significant improvement in model performance, especially in the nighttime. The RAMS/VUCM simulates the diurnal variations of surface energy balance fluxes realistically. This contributes to a reasonable UBL formation. A weakly unstable UBL is formed in the nighttime with UBL heights of about 100–200 m. When urban surfaces are represented in the RAMS using a land surface model of the Land Ecosystem-Atmosphere Feedback (LEAF), the RAMS/LEAF produces strong cold biases and thus fails to simulate UHI formation. This is due to the poor representation or absence of important urban physical processes in the RAMS/LEAF. This study implies that urban physical processes should be included in numerical models in order to reasonably simulate meteorology and air quality in urban areas and that the VUCM is one of the promising urban canopy models. 相似文献
3.
Simulation of Meteorological Fields Within and Above Urban and Rural Canopies with a Mesoscale Model 总被引：3，自引：4，他引：3
Accurate simulation of air quality at neighbourhood scales (on order of 1-km horizontal grid spacing) requires detailed meteorological fields inside the roughness sub-layer (RSL). Since the assumptions of the roughness approach, used by most of the mesoscale models, are unsatisfactory at this scale, a detailed urban and rural canopy parameterisation, called DA-SM2-U, is developed inside the Penn State/NCAR Mesoscale Model (MM5) to simulate the meteorological fields within and above the urban and rural canopies. DA-SM2-U uses the drag-force approach to represent the dynamic and turbulent effects of the buildings and vegetation, and a modified version of the soil model SM2-U, called SM2-U(3D), to represent the thermodynamic effects of the canopy elements. The turbulence length scale is also modified inside the canopies. SM2-U(3D) assesses the sensible and latent heat fluxes from rural and urban surfaces in each of the computational layers inside the canopies by considering the shadowing effect, the radiative trapping by the street canyons, and the storage heat flux by the artificial surfaces. DA-SM2-U is tested during one simulated day above the city of Philadelphia, U.S.A. It is shown that DA-SM2-U is capable of simulating the important features observed in the urban and rural RSL, as seen in the vertical profiles of the shear stress, turbulent kinetic energy budget components, eddy diffusivity, potential air temperature, and specific humidity. Within the canopies, DA-SM2-U simulates the decrease of the wind speed inside the dense canopies, the skirting of the flow around the canopy blocks, warmer air inside the vegetation canopy than above open areas during the night and conversely during the day, and constantly warmer air inside the urban canopy. The comparison with measurements shows that the surface air temperature above rural and urban areas is better simulated by DA-SM2-U than by the `standard version' of MM5. 相似文献
4.
不同下垫面数据和城市冠层参数化方案对江苏气温影响的个例分析 总被引：1，自引：0，他引：1
利用中尺度数值模式WRF,分别选用新旧两种下垫面资料和不同城市冠层模型设计试验,以江苏一次秋末高温天气个例(2014年11月20—21日)为背景,研究城市化进程对气温的影响和可能机制。将模式结果与江苏国家气象观测站和地面加密区域自动站观测资料进行对比,并分析3组试验结果发现:(1)采用BEP城市方案对2 m气温、2 m相对湿度和10 m风速等物理量的日变化模拟最优。(2)相比USGS数据,MODIS较新地表覆盖变化数据能更真实反映研究区域当前地表类型分布情况,且能提高近地面风温湿要素空间分布的模拟。(3)分析不同试验模拟的地表能量平衡过程差异,发现相比UCM单层城市冠层方案,BEP多层城市冠层方案在白天能更好模拟出城市地区的温度升高以及相对应的地表感热通量和地面热通量的增加。 相似文献
5.
An urban canopy model is developed for use in mesoscale meteorological and environmental modelling. The urban geometry is
composed of simple homogeneous buildings characterized by the canyon aspect ratio (h/w) as well as the canyon vegetation characterized by the leaf aspect ratio (σ
l
) and leaf area density profile. Five energy exchanging surfaces (roof, wall, road, leaf, soil) are considered in the model,
and energy conservation relations are applied to each component. In addition, the temperature and specific humidity of canopy
air are predicted without the assumption of thermal equilibrium. For radiative transfer within the canyon, multiple reflections
for shortwave radiation and one reflection for longwave radiation are considered, while the shadowing and absorption of radiation
due to the canyon vegetation are computed by using the transmissivity and the leaf area density profile function. The model
is evaluated using field measurements in Vancouver, British Columbia and Marseille, France. Results show that the model quite
well simulates the observations of surface temperatures, canopy air temperature and specific humidity, momentum flux, net
radiation, and energy partitioning into turbulent fluxes and storage heat flux. Sensitivity tests show that the canyon vegetation
has a large influence not only on surface temperatures but also on the partitioning of sensible and latent heat fluxes. In
addition, the surface energy balance can be affected by soil moisture content and leaf area index as well as the fraction
of vegetation. These results suggest that a proper parameterization of the canyon vegetation is prerequisite for urban modelling. 相似文献
6.
We develop an urban canopy scheme coupled to a mesoscale atmospheric numerical model and evaluate the simulated climate of
an Australian city. The urban canopy scheme is based on the Town Energy Budget approach, but is modified to efficiently represent
the predominately suburban component of Australian cities in regional climate simulations. Energy conservation is improved
by adding a simple model of air-conditioning to prevent the urban parametrization acting as an energy sink during the Australian
summer. In-canyon vegetation for suburban areas is represented by a big-leaf model, but with a largely reduced set of prognostic
variables compared to previous approaches. Although we have used a recirculation/venting based parametrization of in-canyon
turbulent heat fluxes that employs two canyon wall energy budgets, we avoid using a fixed canyon orientation by averaging
the canyon fluxes after integrating over 180° of possible canyon orientations. The urban canopy scheme is evaluated by simulating
the climate for Melbourne, Australia after coupling it to The Air Pollution Model. The combined system was found to predict
a realistic climatology of air temperatures and winds when compared with observations from Environmental Protection Authority
monitoring stations. The model also produced a plausible partitioning of the urban energy budget when compared to urban flux-tower
studies. Overall, the urban canyon parametrization appears to have reasonable potential for studying present and predicting
changes in future Australian urban climates in regional climate simulations. 相似文献
7.
为了进一步检验裸土参数化的气候模拟性能,本文在文献[1,2]的基础上,利用NCEP再分析资料和Xie等全球降水资料与CCM3模拟结果进行了对比。结果表明：加入裸土参数化方案的CCM3能较好地再现冬季东亚和中国地区区域气候的主要特征,模式较原CCM3能更好地模拟地表温度和东亚及中国西北地区的降水,对东亚季风环流的模拟也较接近实际。同时,该方案在CCM3中的加入改进了青藏高原冬季降雪带及夏季高原东南部降水中心的模拟,提高了模式对高原冬夏季降水的模拟能力,从而再次说明利用观测资料对模式参数修正及参数化方法的改进是提高数值模式模拟能力的一个重要途径。 相似文献
8.
Jianguo LIU Zong-Liang YANG Binghao JIA Longhuan WANG Ping WANG Zhenghui XIE Chunxiang SHI 《大气科学进展》2023,40(2):235-250
In order to compare the impacts of the choice of land surface model(LSM) parameterization schemes, meteorological forcing, and land surface parameters on land surface hydrological simulations, and explore to what extent the quality can be improved, a series of experiments with different LSMs, forcing datasets, and parameter datasets concerning soil texture and land cover were conducted. Six simulations are run for the Chinese mainland on 0.1° × 0.1° grids from 1979 to 2008, and the simulated mon... 相似文献
9.
Modeling the impact of urbanization on the local and regional climate in Yangtze River Delta, China 总被引：7，自引：3，他引：4
Ning Zhang Zhiqiu Gao Xuemei Wang Yan Chen 《Theoretical and Applied Climatology》2010,102(3-4):331-342
The Yangtze River Delta Economic Belt is one of the most active and developed areas in China and has experienced quick urbanization with fast economic development. The weather research and forecasting model (WRF), with a single-layer urban canopy parameterization scheme, is used to simulate the influence of urbanization on climate at local and regional scales in this area. The months January and July, over a 5-year period (2003–2007), were selected to represent the winter and summer climate. Two simulation scenarios were designed to investigate the impacts of urbanization: (1) no urban areas and (2) urban land cover determined by MODIS satellite observations in 2005. Simulated near-surface temperature, wind speed and specific humidity agree well with the corresponding measurements. By comparing the simulations of the two scenarios, differences in near-surface temperature, wind speed and precipitation were quantified. The conversion of rural land (mostly irrigation cropland) to urban land cover results in significant changes to near-surface temperature, humidity, wind speed and precipitation. The mean near-surface temperature in urbanized areas increases on average by 0.45?±?0.43°C in winter and 1.9?±?0.55°C in summer; the diurnal temperature range in urbanized areas decreases on average by 0.13?±?0.73°C in winter and 0.55?±?0.84°C in summer. Precipitation increases about 15% over urban or leeward areas in summer and changes slightly in winter. The urbanization impact in summer is stronger and covers a larger area than that in winter due to the regional east-Asian monsoon climate characterized by warm, wet summers and cool, dry winters. 相似文献
10.
11.
12.
Bruno Bueno Leslie Norford Grégoire Pigeon Rex Britter 《Boundary-Layer Meteorology》2011,140(3):471-489
A scheme that couples a detailed building energy model, EnergyPlus, and an urban canopy model, the Town Energy Balance (TEB), is presented. Both models are well accepted and evaluated within their individual scientific communities. The coupled scheme proposes a more realistic representation of buildings and heating, ventilation and air-conditioning (HVAC) systems, which allows a broader analysis of the two-way interactions between the energy performance of buildings and the urban climate around the buildings. The scheme can be used to evaluate the building energy models that are being developed within the urban climate community. In this study, the coupled scheme is evaluated using measurements conducted over the dense urban centre of Toulouse, France. The comparison includes electricity and natural gas energy consumption of buildings, building façade temperatures, and urban canyon air temperatures. The coupled scheme is then used to analyze the effect of different building and HVAC system configurations on building energy consumption, waste heat released from HVAC systems, and outdoor air temperatures for the case study of Toulouse. Three different energy efficiency strategies are analyzed: shading devices, economizers, and heat recovery. 相似文献
13.
运用中尺度数值模式WRF耦合城市冠层模式（urban canopy model,UCM）,对2016年登陆深圳的热带气旋妮妲（1604）（以下简称妮妲）进行数值模拟。高分辨率数值模拟较好地再现了妮妲登陆前后的强度、路径和累积降水。利用城市化过程当中城市冠层对热带气旋降水的敏感性试验结果表明:城市冠层会减弱对流运动和水汽的输送,导致热带气旋登陆后珠江口城市群区域累积降水量略减少。应用最新的土地利用资料进行的城市下垫面敏感性试验结果表明:由于城市下垫面粗糙度增加,造成登陆地面风的减速,强度减弱,潜热通量与2 m高度比湿相应减小;城市下垫面粗糙度增加会加强该区域垂直对流运动以及不稳定能量增加,有利于降水增强,尤其在城市化下垫面处,热带气旋登陆后6 h累积降水增加量最大可超过20 mm。总体而言,对登陆热带气旋降水而言,耦合城市冠层使城市区域热带气旋降水减少,但在数值模拟中城市冠层影响作用不显著。城市化下垫面对登陆热带气旋暴雨的增幅作用明显,在登陆热带气旋降水预报中应重视。 相似文献
14.
城市不同下垫面与建筑物空间形态对近地表气温等微气候要素产生了重要影响。开展城市气温时空变化模拟与影响因素分析,对于城市热环境评价与城市规划具有重要意义。论文基于高空间分辨率Geoeye-1立体影像,在建筑物高度、下垫面覆盖类型信息提取的基础上,选择南京一中、光华东街、玄武湖、头陀岭4个区域,采用ENVI-met微气候模式,以城市基本气象站南京站的实时气象数据作为背景气象场,模拟不同区域近地表气温的时空分布特征,并利用区域自动气象站观测数据进行精度检验。结果表明:在时间变化上,ENVI-met模拟气温与实测值之间吻合程度较高;在空间分布上,南京一中与光华东街区域气温时空分布规律总体相似,但城市空间形态的差异使得局部区域气温变化不同,玄武湖区域气温由陆地中心向外围呈递减趋势,而头陀岭地形复杂多变,白天气温变化剧烈,夜间空间变化较小。 相似文献
15.
Urban-rural difference of land cover is the key determinant of urban heat island (UHI). In order to evaluate the impact of land cover data on the simulation of UHI, a comparative study between up-to-date CORINE land cover (CLC) and Urban Atlas (UA) with fine resolution (100 and 10 m) and old US Geological Survey (USGS) data with coarse resolution (30 s) was conducted using the Weather Research and Forecasting model (WRF) coupled with bulk approach of Noah-LSM for Berlin. The comparison between old data and new data partly reveals the effect of urbanization on UHI and the historical evolution of UHI, while the comparison between different resolution data reveals the impact of resolution of land cover on the simulation of UHI. Given the high heterogeneity of urban surface and the fine-resolution land cover data, the mosaic approach was implemented in this study to calculate the sub-grid variability in land cover compositions. Results showed that the simulations using UA and CLC data perform better than that using USGS data for both air and land surface temperatures. USGS-based simulation underestimates the temperature, especially in rural areas. The longitudinal variations of both temperature and land surface temperature show good agreement with urban fraction for all the three simulations. To better study the comprehensive characteristic of UHI over Berlin, the UHI curves (UHIC) are developed for all the three simulations based on the relationship between temperature and urban fraction. CLC- and UA-based simulations show smoother UHICs than USGS-based simulation. The simulation with old USGS data obviously underestimates the extent of UHI, while the up-to-date CLC and UA data better reflect the real urbanization and simulate the spatial distribution of UHI more accurately. However, the intensity of UHI simulated by CLC and UA data is not higher than that simulated by USGS data. The simulated air temperature is not dominated by the land cover as much as the land surface temperature, as air temperature is also affected by air advection. 相似文献
16.
使用WRF中尺度数值模式, 分别选用两种不同的边界层参数化方案 (MYJ, YSU) 和3种陆面参数化方案 (SLAB, Noah, RUC), 对2004年7月1日08:00—7月4日20:00 (北京时) 北京地区夏季边界层结构进行1 km的高分辨模拟。对比分析了近地面层风场、温度场以及边界层的日变化特征, 结果发现:WRF模式基本模拟出了北京夏季边界层的日变化特征; 在边界层方案中, MYJ方案描述的边界层结构较YSU方案合理; Noah陆面模式较好地反映了城市的热岛效应; 无降水时, 风速及边界层高度对于陆面过程不敏感, 而降水发生后, 陆面过程对于边界层结构的影响增大; 各方案模拟的城区风速明显偏大, 这是因为没有充分考虑城市建筑物的阻力作用。 相似文献
17.
Volker K. Schilling 《Boundary-Layer Meteorology》1991,55(3):283-304
A parameterization scheme has been developed to describe the effects of a tall forest on the mean structure of the atmospheric boundary layer (ABL). The main advantage of the scheme is that dynamical and thermodynamical effects of a forest surface can be simulated satisfactorily using only a coarse-grid resolution within numerical models. Thereby, the canopy layer is parameterized as a quasi-subgrid phenomenon. This makes it possible to study meteorological phenomena within the ABL in a very economical way (with respect to computational time) whereby, nevertheless, more detailed information concerning the forest surface is taken into account than could be done using the same grid resolution and quite simple assumptions describing the canopy, e.g., the effective roughness.The applicability in numerical models is shown by using a slightly modified two-dimensional version of the mesoscale model FITNAH. For comparison, simulations with a high numerical grid resolution within the canopy have been carried out.Model results reproduce the known meteorological phenomena in forested areas, e.g., a stable thermal stratification near the surface during the day, and at night, a neutral — or slightly unstable condition — and, in general, reduced windspeed within the canopy layer.Diurnal variations and spatial distributions of temperature and humidity are found to be similar for both cases. Also, a thermally-induced local circulation system in the vicinity of a large clearing has been simulated satisfactorily.A comparison of the calculated results verifies that the parameterization scheme is quite suitable for simulating the effects of plant canopies on the distributions of meteorological variables in the ABL. 相似文献
18.
应用基于多层城市冠层方案BEP(Building Environment Parameterization)增加室内空调系统影响的建筑物能量模式BEM(Building Energy Model)方案的WRF模式,模拟研究重庆热岛的特征、成因以及局地环流对热岛形成的影响。文中共有两个算例,一为重庆真实下垫面算例,称之为URBAN算例,二为将城市下垫面替换为耕地下垫面的对比算例,称之为NOURBAN算例。结果表明:1)WRF方案模拟结果与观测2 m气温的对比吻合较好,误差主要出现在正午温度峰值和凌晨温度谷值处,由城市下垫面特性及城市内建筑分布误差引起。2)BEP+BEM方案较好地模拟出了重庆地区的热岛分布的空间和时间特征。重庆市温度的分布受地形和城市下垫面的双重影响,越靠近城区,温度的分布受城市化影响就越大,在海拔低处,温度就越高。3)城区立体三维表面对辐射的陷阱作用导致城市表面总体反射率小,向上短波辐射小于郊区约20 W/m~2。城市表面以感热排放为主,而郊区则表现为潜热的作用占主导。夜间城市地表储热以及空调废热向大气释放,是城市热岛形成的重要原因。4)模拟区域背景风场主要为东南风,局地环流呈现出越靠近山区风速越大、城市区域风速较小的特性,体现了城市密集的建筑群对低层大气流场的空气动力学效应,以及复杂山谷地形的山谷风环流特性。在市区的西侧和东南侧均有高大山脉阻挡,山脉对城市出流的阻碍作用、气流越山与绕流运动对城市热岛的形成有一定影响。 相似文献
19.
多层城市冠层模式的建立及数值试验研究 总被引：4，自引：1，他引：3
为在城市气象数值模拟中更好地体现由城市发展引起的下垫面土地利用改变及人为活动对大气过程的影响,建立了基于建筑物三维分布的多层城市冠层模式,冠层内动力方程组考虑了建筑物冠层拖曳力的作用及雷诺应力的影响,通过引入建筑物宽度、间距以及垂直分布密度指数等建筑物形态特征参数,以更好地体现城市复杂地表对大气温度、湿度及动量方程的影响.同时,该模式分屋顶、4个侧壤及地面分别考虑辐射及能量平衡求解表面温度,计算各表面与大气的通量交换,并考虑辐射阴影效应、冠层内部各个面之间的可视因子、以及与冠层内建筑物密度指数、可视因子等相关的多重反射辐射导致的辐射截陷作用.模式的离线检验结果表明:(1)冠层模式计算风廓线与风洞实验测量数据吻合良好;(2)离线冠层模式能够模拟实际小区的风速、温度垂直廓线,并能够较好地体现小区内气温日变化.冠层模式与区域边界层模式耦合检验结果表明:(1)耦合模拟的近地面(2 m处)气温及地表温度的结果明显优于传统的水泥平板方案,尤其是在夜间,水泥平板方案与实测气温最大偏差4 K左右,耦合模拟方案为1-2 K;(2)耦合模拟方案考虑了建筑物对冠层之上的拖曳力影响以及建筑物形态结构对雷诺应力的影响,风速(10 m处)计算结果与观测值相差约在1 m/s,水泥平板方案偏差3 m/s左右. 相似文献
20.
CMIP6全球气候模式对青藏高原中东部地表感热通量模拟能力评估 总被引：1，自引：0，他引：1
利用青藏高原（以下简称高原）气象台站常规观测资料、国家青藏高原科学数据中心的青藏高原地气相互作用过程高分辨率（逐小时）综合观测数据集（2005～2016）、国际耦合模式比较计划第六阶段（CMIP6）的历史模拟试验数据和卫星辐射资料,定量评估了12个全球气候模式对1979～2014年高原中东部地表感热通量的模拟能力,并对其模拟偏差进行了成因分析。结果表明,CMIP6模式可较好地重现高原地表感热通量的年循环和季节平均的空间分布型,但数值较计算感热通量偏低,主要表现为对感热通量大值区严重低估。区域平均而言,12个模式模拟的春季高原中东部感热通量的时间演变序列整体较计算感热通量偏低,其中偏差最大的模式为MIROC6,其多年均值仅为计算值的1/3左右。进一步分析发现多模式模拟的春季高原10 m高度处风速和地气温差分别偏强和偏弱,说明CMIP6模拟的春季高原感热通量偏低可主要归因于地气温差的模拟冷偏差。地气温差的模拟冷偏差在高原中东部地区普遍存在,且地表温度和空气温度均存在明显冷偏差,尤其地表温度偏差更大,这很大程度上可能与CMIP6多模式模拟的春季高原降水偏强有关。 相似文献