首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 297 毫秒
1.
Industrial pollution has a significant effect on aerosol properties in Changsha City, a typical city of central China. Therefore, year-round measurements of aerosol optical, radiative and chemical properties from 2012 to 2014 at an urban site in Changsha were analyzed. During the observation period, the energy structure was continuously optimized, which was characterized by the reduction of coal combustion. The aerosol properties have obvious seasonal variations. The seasonal average aerosol optical depth (AOD) at 500 nm ranged from 0.49 to 1.00, single scattering albedo (SSA) ranged from 0.93 to 0.97, and aerosol radiative forcing at the top of the atmosphere (TOA) ranged from ?24.0 to 3.8 W m?2. The chemical components also showed seasonal variations. Meanwhile, the scattering aerosol, such as organic carbon, SO42?, NO3?, and NH4+ showed a decrease, and elemental carbon increased. Compared with observation in winter 2012, AOD and TOA decreased by 0.14 and ?1.49 W m?2 in winter 2014. The scattering components, SO42?, NO3? and NH4+, decreased by 12.8 μg m?3 (56.8%), 9.2 μg m?3 (48.8%) and 6.4 μg m?3 (45.2%), respectively. The atmospheric visibility and pollution diffusion conditions improved. The extinction and radiative forcing of aerosol were significantly controlled by the scattering aerosol. The results indicate that Changsha is an industrial city with strong scattering aerosol. The energy structure optimization had a marked effect on controlling pollution, especially in winter (strong scattering aerosol).  相似文献   

2.
A significant fraction of the total number of particles present in the atmosphere is formed by nucleation in the gas phase. Nucleation and the subsequent growth process influence both number concentration of particles and their size distribution besides chemical and optical properties of atmospheric aerosols. Sulphate aerosol nucleation mechanisms promoted by ions have been evaluated here in a tropospheric interactive chemistry-aerosol module for mass and number concentration in a global atmospheric model. The indirect radiative forcing of sulphate particles is assessed in this model; indirect radiative forcing is different for ion-induced (IIN) and ion-mediated (IMN) mechanisms. The indirect radiative forcing in 10-year simulation runs has been calculated as ?1.42?W/m2 (IIN) and ?1.54?W/m2 (IMN). The 5% emission of primary sulphate particles in simulations changes the indirect radiative forcing from ?1.42 to ?1.44?W/m2 for IIN case, and from ?1.54 to ?1.55 W/m2 for the IMN case. More precisely, owing to greater nucleation rates, IMN mechanisms produces greater cooling than the IIN mechanisms in the backdrop that both mechanisms produce almost identical distribution of CDNC in their pre-industrial runs. The inclusion of primary particles in simulations with IIN and IMN mechanisms increases both CDNC and the indirect radiative forcing.  相似文献   

3.
Global aerosol and ozone distributions and their associated radiative forcings were simulated between 1850 and 2100 following a recent historical emission dataset and under the representative concentration pathways (RCP) for the future. These simulations were used in an Earth System Model to account for the changes in both radiatively and chemically active compounds, when simulating the climate evolution. The past negative stratospheric ozone trends result in a negative climate forcing culminating at ?0.15 W m?2 in the 1990s. In the meantime, the tropospheric ozone burden increase generates a positive climate forcing peaking at 0.41 W m?2. The future evolution of ozone strongly depends on the RCP scenario considered. In RCP4.5 and RCP6.0, the evolution of both stratospheric and tropospheric ozone generate relatively weak radiative forcing changes until 2060–2070 followed by a relative 30 % decrease in radiative forcing by 2100. In contrast, RCP8.5 and RCP2.6 model projections exhibit strongly different ozone radiative forcing trajectories. In the RCP2.6 scenario, both effects (stratospheric ozone, a negative forcing, and tropospheric ozone, a positive forcing) decline towards 1950s values while they both get stronger in the RCP8.5 scenario. Over the twentieth century, the evolution of the total aerosol burden is characterized by a strong increase after World War II until the middle of the 1980s followed by a stabilization during the last decade due to the strong decrease in sulfates in OECD countries since the 1970s. The cooling effects reach their maximal values in 1980, with ?0.34 and ?0.28 W m?2 respectively for direct and indirect total radiative forcings. According to the RCP scenarios, the aerosol content, after peaking around 2010, is projected to decline strongly and monotonically during the twenty-first century for the RCP8.5, 4.5 and 2.6 scenarios. While for RCP6.0 the decline occurs later, after peaking around 2050. As a consequence the relative importance of the total cooling effect of aerosols becomes weaker throughout the twenty-first century compared with the positive forcing of greenhouse gases. Nevertheless, both surface ozone and aerosol content show very different regional features depending on the future scenario considered. Hence, in 2050, surface ozone changes vary between ?12 and +12 ppbv over Asia depending on the RCP projection, whereas the regional direct aerosol radiative forcing can locally exceed ?3 W m?2.  相似文献   

4.
Anthropogenic aerosols play an important role in the atmospheric energy balance. Anthropogenic aerosol optical depth (AOD) and its accompanying shortwave radiative forcing (RF) are usually simulated by nu- merical models. Recently, with the development of space-borne instruments and sophisticated retrieval algorithms, it has become possible to estimate aerosol radiative forcing based on satellite observations. In this study, we have estimated shortwave direct radiative forcing due to anthropogenic aerosols over oceans in all-sky conditions by combining clouds and the Single Scanner Footprint data of the Clouds and Earth’s Radiant Energy System (CERES/SSF) experiment, which provide measurements of upward shortwave fluxes at the top of atmosphere, with Moderate Resolution Imaging Spectroradiometer (MODIS) aerosol and cloud products. We found that globally averaged aerosol radiative forcing over oceans in the clear-sky conditions and all-sky conditions were -1.03±0.48 W m-2 and -0.34 ±0.16 W m-2, respectively. Direct radiative forcing by anthropogenic aerosols shows large regional and seasonal variations. In some regions and in particular seasons, the magnitude of direct forcing by anthropogenic aerosols can be comparable to the forcing of greenhouse gases. However, it shows that aerosols caused the cooling effect, rather than warming effect from global scale, which is different from greenhouse gases.  相似文献   

5.
A group of twenty-four leading atmospheric and climate scientists provided subjective probability distributions that represent their current judgment about the value of planetary average direct and indirect radiative forcing from anthropogenic aerosols at the top of the atmosphere. Separate estimates were obtained for the direct aerosol effect, the semi-direct aerosol effect, cloud brightness (first aerosol indirect effect), and cloud lifetime/distribution (second aerosol indirect effect). Estimates were also obtained for total planetary average forcing at the top of the atmosphere and for surface forcing. Consensus was strongest among the experts in their assessments of the direct aerosol effect and the cloud brightness indirect effect. Forcing from the semi-direct effect was thought to be small (absolute values of all but one of the experts' best estimates were ≤0.5 W/m2). There was not agreement about the sign of the best estimate of the semi-direct effect, and the uncertainty ranges some experts gave for this effect did not overlap those given by others. All best estimates of total aerosol forcing were negative, with values ranging between −0.25 W/m2 and −2.1 W/m2. The range of uncertainty that a number of experts associated with their estimates, especially those for total aerosol forcing and for surface forcing, was often much larger than that suggested in 2001 by the IPCC Working Group 1 summary figure (IPCC, 2001).  相似文献   

6.
Richard VanCuren 《Climatic change》2012,112(3-4):1071-1083
Exploiting surface albedo change has been proposed as a form of geoengineering to reduce the heating effect of anthropogenic increases in greenhouse gases (GHGs). Recent modeling experiments have projected significant negative radiative forcing from large-scale implementation of albedo reduction technologies (“cool” roofs and pavements). This paper complements such model studies with measurement-based calculations of the direct radiation balance impacts of replacement of conventional roofing with “cool” roof materials in California. This analysis uses, as a case study, the required changes to commercial buildings embodied in California’s building energy efficiency regulations, representing a total of 4300 ha of roof area distributed over 16 climate zones. The estimated statewide mean radiative forcing per 0.01 increase in albedo (here labeled RF01) is ?1.38 W/m2. The resulting unit-roof-area mean annual radiative forcing impact of this regulation is ?44.2 W/m2. This forcing is computed to counteract the positive radiative forcing of ambient atmospheric CO2 at a rate of about 41 kg for each square meter of roof. Aggregated over the 4300 ha of cool roof estimated built in the first decade after adoption of the State regulation, this is comparable to removing about 1.76 million metric tons (MMT) of CO2 from the atmosphere. The point radiation data used in this study also provide perspective on the spatial variability of cool roof radiative forcing in California, with individual climate zone effectiveness ranging from ?37 to ?59 W/m2 of roof. These “bottom-up” calculations validate the estimates reported for published “top down” modeling, highlight the large spatial diversity of the effects of albedo change within even a limited geographical area, and offer a potential methodology for regulatory agencies to account for the climate effects of “cool” roofing in addition to its well-known energy efficiency benefits.  相似文献   

7.
Summary One of the great unknowns in climate research is the contribution of aerosols to climate forcing and climate perturbation. In this study, retrievals from AERONET are used to estimate the direct clear-sky aerosol top-of-atmosphere and surface radiative forcing effects for 12 multi-site observing stations in Europe. The radiative transfer code sdisort in the libRadtran environment is applied to accomplish these estimations. Most of the calculations in this study rely on observations which have been made for the years 1999, 2000, and 2001. Some stations do have observations dating back to the year of 1995. The calculations rely on a pre-compiled aerosol optical properties database for Europe. Aerosol radiative forcing effects are calculated with monthly mean aerosol optical properties retrievals and calculations are presented for three different surface albedo scenarios. Two of the surface albedo scenarios are generic by nature bare soil and green vegetation and the third relies on the ISCCP (International Satellite Cloud Climatology Project) data product. The ISCCP database has also been used to obtain clear-sky weighting fractions over AERONET stations. The AERONET stations cover the area 0° to 30° E and 42° to 52° N. AERONET retrievals are column integrated and this study does not make any seperation between the contribution of natural and anthropogenic components. For the 12 AERONET stations, median clear-sky top-of-atmosphere aerosol radiative forcing effect values for different surface albedo scenarios are calculated to be in the range of −4 to −2 W/m2. High median radiative forcing effect values of about −6 W/m2 were found to occur mainly in the summer months while lower values of about −1 W/m2 occur in the winter months. The aerosol surface forcing also increases in summer months and can reach values of −8 W/m2. Individual stations often have much higher values by a factor of 2. The median top-of-atmosphere aerosol radiative forcing effect efficiency is estimated to be about −25 W/m2 and their respective surface efficiency is around −35 W/m2. The fractional absorption coefficient is estimated to be 1.7, but deviates significantly from station to station. In addition, it is found that the well known peak of the aerosol radiative forcing effect at a solar zenith angle of about 75° is in fact the average of the peaks occurring at shorter and longer wavelengths. According to estimations for Central Europe, based on mean aerosol optical properties retrievals from 12 stations, the critical threshold of the aerosol single scattering albedo, between cooling and heating in the presence of an aerosol layer, is close between 0.6 and 0.76.  相似文献   

8.
 The atmospheric general circulation model ECHAM-4 is coupled to a chemistry model to calculate sulfate mass distribution and the radiative forcing due to sulfate aerosol particles. The model simulates the main components of the hydrological cycle and, hence, it allows an explicit treatment of cloud transformation processes and precipitation scavenging. Two experiments are performed, one with pre-industrial and one with present-day sulfur emissions. In the pre-industrial emission scenario SO2 is oxidized faster to sulfate and the in-cloud oxidation via the reaction with ozone is more important than in the present-day scenario. The atmospheric sulfate mass due to anthropogenic emissions is estimated as 0.38 Tg sulfur. The radiative forcing due to anthropogenic sulfate aerosols is calculated diagnostically. The backscattering of shortwave radiation (direct effect) as well as the impact of sulfate aerosols on the cloud albedo (indirect effect) is estimated. The model predicts a direct forcing of −0.35 W m-2 and an indirect forcing of −0.76 W m-2. Over the continents of the Northern Hemisphere the direct forcing amounts to −0.64 W m-2. The geographical distribution of the direct and indirect effect is very different. Whereas the direct forcing is strongest over highly polluted continental regions, the indirect forcing over sea exceeds that over land. It is shown that forcing estimates based on monthly averages rather than on instantaneous sulfate pattern overestimate the indirect effect but have little effect on the direct forcing. Received: 16 October 1996/Accepted: 24 October 1996  相似文献   

9.
对气溶胶气候效应开展分类评估并探讨诊断方法的合理性。人为气溶胶辐射效应对计算云辐射强迫的影响为0.38 W·m~(-2)。诊断评估气溶胶对云辐射强迫的影响需要排除这个偏差。两种基于不同试验设计诊断得出的半直接效应分别为0.21和0.09 W·m~(-2),存在显著差异。主要原因可能是人为气溶胶影响云辐射强迫的不同机制之间在模式模拟过程中不断地相互交织,不是简单的线性叠加关系。模式诊断得出的Twomey效应不仅包括Twomey效应本身,还包括Twomey效应引起的部分快速调整。总之,利用模式评估分析人为气溶胶气候效应需要注意审查试验设计和诊断方法的合理性。  相似文献   

10.
We present results of direct aerosol radiative forcing over a French Mediterranean coastal zone based on one year of continuous observations of aerosol optical properties during 2005–2006. Monthly-mean aerosol optical depth at 440 nm ranged between 0.1 and 0.34, with high Angstrom coefficient (α > 1.2). The single scattering albedo (at 525 nm) estimated at the surface ranged between 0.7 and 0.8, indicating significant absorption. The presence of aerosols over the Mediterranean zone during summer decreases the shortwave radiation reaching the surface by as much as 26 ± 3.9 W m− 2, and increases the top of the atmosphere reflected radiation by as much as 5.2 ± 1.0 W m− 2. The shortwave atmospheric absorption translates to an atmospheric heating of 2.5 to 4.6 K day− 1. Concerted efforts are needed for investigating the possible impact of the increase in heating rate on the maintenance of heat-waves frequently occurring over this coastal region during summer time.  相似文献   

11.
为减少不同气候模式评估气溶胶气候效应的差异,第六次耦合模式比较计划(Coupled Model Intercomparison Project Phase 6,CMIP6)直接给定了人为气溶胶强迫数据。因此,有必要基于此强迫数据重新评估气溶胶气候效应。本研究首先将CMIP6给出的描述人为气溶胶强迫的模块引入南京信息工程大学(Nanjing University of Information Science and Technology,NUIST)的地球系统模式(The NUIST Earth System Model,NESM)。之后,利用NESM模式评估地球辐射收支平衡对此人为气溶胶强迫的响应,并分析模式模拟结果的不确定性。评估给出的人为气溶胶有效辐射强迫为-0. 45(±0. 28) W·m~(-2)。其中,气溶胶直接辐射效应为-0. 34(±0. 01) W·m~(-2),与第二次气溶胶比较计划(The second phase of Aerosol Comparisons between Observations and M odels,Aero ComⅡ)的评估结果基本一致;气溶胶对云辐射强迫的影响(包括半直接效应和间接效应)为-0. 10(±0. 30) W·m~(-2),明显受到模式内部变率的干扰,具有较大的不确定性。  相似文献   

12.
A Regional Climate Chemistry Modeling System that employed empirical parameterizations of aerosol-cloud microphysics was applied to investigate the spatial distribution, radiative forcing (RF), and climate effects of black carbon (BC) over China. Results showed high levels of BC in Southwest, Central, and East China, with maximum surface concentrations, column burden, and optical depth (AOD) up to 14 μg?m?3, 8 mg?m?2, and 0.11, respectively. Black carbon was found to result in a positive RF at the top of the atmosphere (TOA) due to its direct effect while a negative RF due to its indirect effect. The regional-averaged direct and indirect RF of BC in China was about +0.81 and ?0.95 W?m?2, respectively, leading to a net RF of ?0.15 W?m?2 at the TOA. The BC indirect RF was larger than its direct RF in South China. Due to BC absorption of solar radiation, cloudiness was decreased by 1.33 %, further resulting in an increase of solar radiation and subsequently a surface warming over most parts of China, which was opposite to BC’s indirect effect. Further, the net effect of BC might cause a decrease of precipitation of ?7.39 % over China. Investigations also suggested large uncertainties and non-linearity in BC’s indirect effect on regional climate. Results suggested that: (a) changes in cloud cover might be more affected by BC’s direct effect, while changes in surface air temperature and precipitation might be influenced by BC’s indirect effect; and (b) BC second indirect effect might have more influence on cloud cover and water content compared to first indirect effect. This study highlighted a substantial role of BC on regional climate changes.  相似文献   

13.
硫酸盐气溶胶直接辐射效应在线与离线模拟方法的比较   总被引：3，自引：0，他引：3  
利用区域气候模式RegCM 2与大气化学模式连接的模拟系统 ,比较了硫酸盐气溶胶辐射强迫的在线、离线模拟方法的硫酸盐柱含量、大气顶直接辐射强迫及地表温度响应。发现 :在线与离线模拟方法得到的硫酸盐柱含量、有无反馈大气顶直接辐射强迫和地表温度响应在许多地区有很大差异 ,这种差异在较小区域平均的尺度上更显著 ,在全区域平均尺度上也较为明显 ,是不能被忽略的 ;结果显示从硫酸盐含量到辐射强迫和地表温度响应逐渐加大的差异 ,说明硫酸盐气溶胶的辐射强迫与模拟方法有关 ,显示出较大的不确定性。  相似文献   

14.
《Atmospheric Research》2009,91(2-4):195-202
We present results of direct aerosol radiative forcing over a French Mediterranean coastal zone based on one year of continuous observations of aerosol optical properties during 2005–2006. Monthly-mean aerosol optical depth at 440 nm ranged between 0.1 and 0.34, with high Angstrom coefficient (α > 1.2). The single scattering albedo (at 525 nm) estimated at the surface ranged between 0.7 and 0.8, indicating significant absorption. The presence of aerosols over the Mediterranean zone during summer decreases the shortwave radiation reaching the surface by as much as 26 ± 3.9 W m− 2, and increases the top of the atmosphere reflected radiation by as much as 5.2 ± 1.0 W m− 2. The shortwave atmospheric absorption translates to an atmospheric heating of 2.5 to 4.6 K day− 1. Concerted efforts are needed for investigating the possible impact of the increase in heating rate on the maintenance of heat-waves frequently occurring over this coastal region during summer time.  相似文献   

15.
The direct and semi-direct radiative effects of anthropogenic aerosols on the radiative transfer and cloud fields in the Western United States (WUS) according to seasonal aerosol optical depth (AOD) and regional climate are examined using a regional climate model (RCM) in conjunction with the aerosol fields from a GEOS-Chem chemical-transport model (CTM) simulation. The two radiative effects cannot be separated within the experimental design in this study, thus the combined direct- and semi-direct effects are called radiative effects hereafter. The CTM shows that the AOD associated with the anthropogenic aerosols is chiefly due to sulfates with minor contributions from black carbon (BC) and that the AOD of the anthropogenic aerosol varies according to local emissions and the seasonal low-level winds. The RCM-simulated anthropogenic aerosol radiative effects vary according to the characteristics of regional climate, in addition to the AOD. The effects on the top of the atmosphere (TOA) outgoing shortwave radiation (OSRT) range from ?0.2?Wm?2 to ?1?Wm?2. In Northwestern US (NWUS), the maximum and minimum impact of anthropogenic aerosols on OSRT occurs in summer and winter, respectively, following the seasonal AOD. In Arizona-New Mexico (AZNM), the effect of anthropogenic sulfates on OSRT shows a bimodal distribution with winter/summer minima and spring/fall maxima, while the effect of anthropogenic BC shows a single peak in summer. The anthropogenic aerosols affect surface insolation range from ?0.6?Wm?2 to ?2.4?Wm?2, with similar variations found for the effects on OSRT except that the radiative effects of anthropogenic BC over AZNM show a bimodal distribution with spring/fall maxima and summer/winter minima. The radiative effects of anthropogenic sulfates on TOA outgoing longwave radiation (OLR) and the surface downward longwave radiation (DLRS) are notable only in summer and are characterized by strong geographical contrasts; the summer OLR in NWUS (AZNM) is reduced (enhanced) by 0.52?Wm?2 (1.14?Wm?2). The anthropogenic sulfates enhance (reduce) summer DLRS by 0.2?Wm?2 (0.65?Wm?2) in NWUS (AZNM). The anthropogenic BC affect DLRS noticeably only in AZNM during summer. The anthropogenic aerosols affect the cloud water path (CWP) and the radiative transfer noticeably only in summer when convective clouds are dominant. Primarily shortwave-reflecting anthropogenic sulfates decrease and increase CWP in AZNM and NWUS, respectively, however, the shortwave-absorbing anthropogenic BC reduces CWP in both regions. Due to strong feedback via convective clouds, the radiative effects of anthropogenic aerosols on the summer radiation field are more closely correlated with the changes in CWP than the AOD. The radiative effect of the total anthropogenic aerosols is dominated by the anthropogenic sulfates that contribute more than 80% of the total AOD associated with the anthropogenic aerosols.  相似文献   

16.
A regional climate model is employed to simulate the aerosols(dust,sulfate,black carbon,and organic carbon) and their direct effect on the climate over China.The emphasis is on the direct radiative forcing due to the change in mixing state of aerosols.The results show that direct radiative forcing is significantly different between externally and internally mixed aerosols.At the top of the atmosphere(TOA),the radiative forcing of externally mixed aerosols is larger than that of internally mixed ones,especially in the Tarim desert region where the difference is about 0.7 W m 2.At the surface,however,the situation becomes opposite,especially in the Sichuan basin where the difference is about-1.4 W m 2.Nonetheless,either externally or internally mixed aerosols in China can result in a significant cooling effect,except for the warming in South China in winter and the slight warming in North China in February.The cooling effect induced by externally mixed aerosols is weaker than that induced by internally mixed aerosols,and this is more obvious in spring and winter than in summer and autumn.In spring and summer,the inhibiting effect of externally mixed aerosols on precipitation is less than that of internally mixed aerosols,whereas in autumn and winter the difference is not obvious.  相似文献   

17.
Climate forcing by carbonaceous and sulfate aerosols   总被引：3，自引：0，他引：3  
 An atmospheric general circulation model is coupled to an atmospheric chemistry model to calculate the radiative forcing by anthropogenic sulfate and carbonaceous aerosols. The latter aerosols result from biomass burning as well as fossil fuel burning. The black carbon associated with carbonaceous aerosols is absorbant and can decrease the amount of reflected radiation at the top-of-the-atmosphere. In contrast, sulfate aerosols are reflectant and the amount of reflected radiation depends nonlinearly on the relative humidity. We examine the importance of treating the range of optical properties associated with sulfate aerosol at high relative humidities and find that the direct forcing by anthropogenic sulfate aerosols can decrease from −0.81 W m-2 to −0.55 Wm-2 if grid box average relative humidity is not allowed to increase above 90%. The climate forcing associated with fossil fuel emissions of carbonaceous aerosols is calculated to range from +0.16 to +0.20 Wm-2, depending on how much organic carbon is associated with the black carbon from fossil fuel burning. The direct forcing of carbonaceous aerosols associated with biomass burning is calculated to range from −0.23 to −0.16 Wm-2. The pattern of forcing by carbonaceous aerosols depends on both the surface albedo and the presence of clouds. Multiple scattering associated with clouds and high surface albedos can change the forcing from negative to positive. Received: 29 September 1997 / Accepted: 10 June 1998  相似文献   

18.
A recent modelling study has shown that precipitation and runoff over land would increase when the reflectivity of marine clouds is increased to counter global warming. This implies that large scale albedo enhancement over land could lead to a decrease in runoff over land. In this study, we perform simulations using NCAR CAM3.1 that have implications for Solar Radiation Management geoengineering schemes that increase the albedo over land. We find that an increase in reflectivity over land that mitigates the global mean warming from a doubling of CO2 leads to a large residual warming in the southern hemisphere and cooling in the northern hemisphere since most of the land is located in northern hemisphere. Precipitation and runoff over land decrease by 13.4 and 22.3%, respectively, because of a large residual sinking motion over land triggered by albedo enhancement over land. Soil water content also declines when albedo over land is enhanced. The simulated magnitude of hydrological changes over land are much larger when compared to changes over oceans in the recent marine cloud albedo enhancement study since the radiative forcing over land needed (?8.2?W?m?2) to counter global mean radiative forcing from a doubling of CO2 (3.3?W?m?2) is approximately twice the forcing needed over the oceans (?4.2?W?m?2). Our results imply that albedo enhancement over oceans produce climates closer to the unperturbed climate state than do albedo changes on land when the consequences on land hydrology are considered. Our study also has important implications for any intentional or unintentional large scale changes in land surface albedo such as deforestation/afforestation/reforestation, air pollution, and desert and urban albedo modification.  相似文献   

19.
Current global climate models cannot resolve the complex topography over the Tibetan Plateau (TP) due to their coarse resolution. This study investigates the impacts of horizontal resolution on simulating aerosol and its direct radiative effect (DRE) over the TP by applying two horizontal resolutions of about 100 km and 25 km to the Chinese Academy of Sciences Flexible Global Ocean-Atmosphere Land System (CAS FGOALS-f3) over a 10-year period. Compared to the AErosol RObotic NETwork observations, a high-resolution model (HRM) can better reproduce the spatial distribution and seasonal cycles of aerosol optical depth (AOD) compared to a low-resolution model (LRM). The HRM bias and RMSE of AOD decreased by 0.08 and 0.12, and the correlation coefficient increased by 0.22 compared to the LRM. An LRM is not sufficient to reproduce the aerosol variations associated with fine-scale topographic forcing, such as in the eastern marginal region of the TP. The difference between hydrophilic aerosols in an HRM and LRM is caused by the divergence of the simulated relative humidity (RH). More reasonable distributions and variations of RH are conducive to simulating hydrophilic aerosols. An increase of the 10-m wind speed in winter by an HRM leads to increased dust emissions. The simulated aerosol DREs at the top of the atmosphere (TOA) and at the surface by the HRM are –0.76 W m–2 and –8.72 W m–2 over the TP, respectively. Both resolution models can capture the key feature that dust TOA DRE transitions from positive in spring to negative in the other seasons.  相似文献   

20.
RCP4.5: a pathway for stabilization of radiative forcing by 2100   总被引：3，自引：2，他引：1  
Representative Concentration Pathway (RCP) 4.5 is a scenario that stabilizes radiative forcing at 4.5?W?m?2 in the year 2100 without ever exceeding that value. Simulated with the Global Change Assessment Model (GCAM), RCP4.5 includes long-term, global emissions of greenhouse gases, short-lived species, and land-use-land-cover in a global economic framework. RCP4.5 was updated from earlier GCAM scenarios to incorporate historical emissions and land cover information common to the RCP process and follows a cost-minimizing pathway to reach the target radiative forcing. The imperative to limit emissions in order to reach this target drives changes in the energy system, including shifts to electricity, to lower emissions energy technologies and to the deployment of carbon capture and geologic storage technology. In addition, the RCP4.5 emissions price also applies to land use emissions; as a result, forest lands expand from their present day extent. The simulated future emissions and land use were downscaled from the regional simulation to a grid to facilitate transfer to climate models. While there are many alternative pathways to achieve a radiative forcing level of 4.5?W?m?2, the application of the RCP4.5 provides a common platform for climate models to explore the climate system response to stabilizing the anthropogenic components of radiative forcing.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号