首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 46 毫秒
1.
Convection in a quasi-steady, cloud-free, shear-free atmospheric boundary layer is investigated based on a large-eddy simulation model. The performed tests indicate that the characteristic (peak) values of statistical moments at the top of the mixed layer are proportional to the interfacial scales (from gradients of scalars in the interfacial layer). Based on this finding a parameterization is proposed for profiles of scalar variances. The parameterization employs two, semi-empirical similarity functions Fm(z/zi) andFi(z/zi), multiplied by a combination of the mixed-layer scales and the interfacial scales.  相似文献   

2.
An examination of boundary-layer meteorological and avian aerodynamic theories suggests that soaring birds can be used to measure the magnitude of vertical air motions within the boundary layer. These theories are applied to obtain mixed-layer normalized thermal updraft intensity over both flat and complex terrain from the climb rates of soaring American white pelicans and from diagnostic boundary-layer model-produced estimates of the boundary-layer depth zi and the convective velocity scale w*. Comparison of the flatland data with the profiles of normalized updraft velocity obtained from previous studies reveals that the pelican-derived measurements of thermal updraft intensity are in close agreement with those obtained using traditional research aircraft and large eddy simulation (LES) in the height range of 0.2 to 0.8 zi. Given the success of this method, the profiles of thermal vertical velocity over the flatland and the nearby mountains are compared. This comparison shows that these profiles are statistically indistinguishable over this height range, indicating that the profile for thermal updraft intensity varies little over this sample of complex terrain. These observations support the findings of a recent LES study that explored the turbulent structure of the boundary layer using a range of terrain specifications. For terrain similar in scale to that encountered in this study, results of the LES suggest that the terrain caused less than an 11% variation in the standard deviation of vertical velocity.  相似文献   

3.
A model is developed to simulate the potential temperature and the height of the mixed layer under advection conditions. It includes analytic expressions for the effects of mixed-layer conditions upwind of the interface between two different surfaces on the development of the mixed layer downwind from the interface. Model performance is evaluated against tethersonde data obtained on two summer days during sea breeze flow in Vancouver, Canada. It is found that the mixed-layer height and temperature over the ocean has a small but noticeable effect on the development of the mixed layer observed 10 km inland from the coast. For these two clear days, the subsidence velocity at the inversion base capping the mixed layer is estimated to be about 30 mm s–1 from late morning to late afternoon. When the effects of subsidence are included in the model, the mixed-layer height is considerably underpredicted, while the prediction for the mean potential temperature in the mixed layer is considerably improved. Good predictions for both height and temperature can be obtained when values for the heat entrainment ratio,c, 0.44 and 0.68 for these two days respectively for the period from 1000 to 1300 LAT, were used. These values are estimated using an equation including the additional effects on heat entrainment due to the mechanical mixing caused by wind shear at the top of the mixed layer and surface friction. The contribution of wind shear to entrainment was equal to, or greater than, that from buoyant convection resulting from the surface heat flux. Strong wind shear occurred near the top of the mixed layer between the lower level inland flow and the return flow aloft in the sea breeze circulation.Symbols c entrainment parameter for sensible heat - c p specific heat of air at constant pressure, 1010 J kg–1 K–1 - d 1 the thickness of velocity shear at the mixed-layer top, m - Q H surface sensible heat flux, W m–2 - u m mean mixed-layer wind speed, m s–1 - u * friction velocity at the surface, m s–1 - w subsidence velocity, m s–1 - W subsidence warming,oC s–1 - w e entrainment velocity, m s–1 - w * convection velocity in the mixed layer, m s–1 - x downwind horizontal distance from the water-land interface, m - y dummy variable forx, m - Z height above the surface, m - Z i height of capping inversion, m - Z m mixed-layer depth, i.e.,Z i–Zs, m - Z s height of the surface layer, m - lapse rate of potential temperature aboveZ i, K m–1 - potential temperature step atZ i, K - u h velocity step change at the mixed-layer top - m mean mixed-layer potential temperature, K  相似文献   

4.
We examine daily (morning–afternoon) transitions in the atmospheric boundary layer based on large-eddy simulations. Under consideration are the effects of the stratification at the top of the mixed layer and of the wind shear. The results describe the transitory behaviour of temperature and wind velocity, their second moments, the boundary-layer height Z m (defined by the maximum of the potential temperature gradient) and its standard deviation σ m , the mixed-layer height z i (defined by the minimum of the potential temperature flux), entrainment velocity W e, and the entrainment flux H i . The entrainment flux and the entrainment velocity are found to lag slightly in time with respect to the surface temperature flux. The simulations imply that the atmospheric values of velocity variances, measured at various instants during the daytime, and normalized in terms of the actual convective scale w*, are not expected to collapse to a single curve, but to produce a significant scatter of observational points. The measured values of the temperature variance, normalized in terms of the actual convective scale Θ*, are expected to form a single curve in the mixed layer, and to exhibit a considerable scatter in the interfacial layer.  相似文献   

5.
Forced convection in a quasi-steady atmospheric boundary layer is investigated based on a large-eddy simulation (LES) model. The performed simulations show that in the upper portion of the mixed layer the dimensionless (in terms of mixed layer scales) vertical gradients of temperature, humidity, and wind velocity depend on the dimensionless height z/z i and the Reech number Rn. The peak values of variances and covariances at the top of the mixed layer, scaled in terms of the interfacial scales, are functions of the interfacial Richardson number Ri. As a result expressions for the entrainment rates, in the case when the interfacial layer has a finite depth, and a condition for the presence of moistening or drying regimes in the mixed layer, are derived. Profiles of dimensionless scalar moments in the mixed layer are proposed to be expressed in terms of two empirical similarity functions F m and F i , dependent on dimensionless height z/z i , and the interfacial Richardson number Ri. The obtained similarity expressions adequately approximate the LES profiles of scalar statistics, and properly represent the impact of stability, shear, and entrainment. They are also consistent with the parameterization proposed for free convection in the first part of this paper.  相似文献   

6.
Mesoscale models using a non-local K-scheme for parameterization of boundary-layer processes require an estimate of the planetary boundary layer (PBL) height z i at all times. In this paper, two-dimensional sea-breeze experiments are carried out to evaluate three different formulations for the advective contribution in the z i prognostic equation of Deardorff (1974).Poor representation of the thermal internal boundary layer in the sea breeze is obtained when z i is advected by the wind at level z i . However, significantly better results are produced if the mean PBL wind is used for the advecting velocity, or if z i is determined simply by checking for the first sufficiently stable layer above the ground.A Lagrangian particle model is used to demonstrate the effect of each formulation on plume dispersion by the sea breeze.  相似文献   

7.
During the Limagne and Beauce experiments, the INAG-IGN Aerocommander FL 280 aircraft made extensive ‘in situ’ measurements of turbulent fluctuations in diurnally evolving convective boundary layers. In this paper, these measurements were used to investigate characteristics of the molecular dissipation of turbulent fluctuations through the mixed layer and well into the overlying stable layer. The dimensionless dissipation rates of turbulent kinetic energy, temperature and humidity variances, and temperature-humidity covariance (ψ, ψθ, ψ qand ψ θq) were computed and their height variations analysed. The behaviour of the dissipation rate ψ was found to differ significantly from those observed for the other rates. In the lowest region of the mixed layer, ψ does not obey the local free convection prediction. Instead, it follows practically a relationship similar to the one established in the surface layer by Wyngaard et al. (1971). The dissipation rate ψ remains fairly constant in the bulk of the mixed layer (0.3 ≤ z/Z i≤ 0.8) and shows a very rapid decrease above the inversion. These results confirm those reported previously from the Minnesota and Ashchurch data by Kaimal et al. (1976), Caughey and Palmer (1979), etc. The height variations for the other dissipation rates were found to obey, as expected, the (z/Z i)-4/3 decrease predicted under the local free convection similarity hypothesis in the lowest region of the mixed layer. This region extends to the height z/Z i- 0.4, 0.1, and 0.3, respectively, for ψθ, ψq, and ψθq. Above these levels, the dissipation rates ψθ and ψq show, on average, a slight increase to reach peak-values near the mixed-layer top, while the ‘dissipation’ rate ψ θqchanges sign from positive to negative around the height z/Z i, - 0.7. These characteristics confirm the fact that the structures of temperature and humidity fluctuations are considerably affected by their entrainment-induced fluctuations. Therefore, an attempt has been made to non-dimensionalize the dissipation rates near the mixed-layer top with the interfacial scaling factors.  相似文献   

8.
Computations of the buoyantly unstable Ekman layer are performed at low Reynolds number. The turbulent fields are obtained directly by solving the three-dimensional time-dependent Navier-Stokes equations (using the Boussinesq approximation to account for buoyancy effects), and no turbulence model is needed. Two levels of heating are considered, one quite vigorous, the other more moderate. Statistics for the vigorously heated case are found to agree reasonably well with laboratory, field, and large-eddy simulation results, when Deardorff's mixed-layer scaling is used. No indication of large-scale longitudinal roll cells is found in this convection-dominated flow, for which the inversion height to Obukhov length scale ratio –z i /L *=26. However, when heating is more moderate (so that –z i /L *=2), evidence of coherent rolls is present. About 10% of the total turbulent kinetic energy and turbulent heat flux, and 20% of the Reynolds shear stress, are estimated to be a direct consequence of the observed cells.  相似文献   

9.
Flow and turbulence above urban terrain is more complex than above rural terrain, due to the different momentum and heat transfer characteristics that are affected by the presence of buildings (e.g. pressure variations around buildings). The applicability of similarity theory (as developed over rural terrain) is tested using observations of flow from a sonic anemometer located at 190.3 m height in London, U.K. using about 6500 h of data. Turbulence statistics—dimensionless wind speed and temperature, standard deviations and correlation coefficients for momentum and heat transfer—were analysed in three ways. First, turbulence statistics were plotted as a function only of a local stability parameter z/Λ (where Λ is the local Obukhov length and z is the height above ground); the σ i /u * values (i = u, v, w) for neutral conditions are 2.3, 1.85 and 1.35 respectively, similar to canonical values. Second, analysis of urban mixed-layer formulations during daytime convective conditions over London was undertaken, showing that atmospheric turbulence at high altitude over large cities might not behave dissimilarly from that over rural terrain. Third, correlation coefficients for heat and momentum were analyzed with respect to local stability. The results give confidence in using the framework of local similarity for turbulence measured over London, and perhaps other cities. However, the following caveats for our data are worth noting: (i) the terrain is reasonably flat, (ii) building heights vary little over a large area, and (iii) the sensor height is above the mean roughness sublayer depth.  相似文献   

10.
With observational data collected and interpreted by Crane et al. (1977), the adequacy of the O'Brien polynomial to represent the exchange profile of heat and pollution in a convective boundary layer is examined and a refinement suggested. Also, it is shown that the height of the surface layer, h=0.04 z i , developed by Blackadar and Tennekes (1968) for a neutrally stratified boundary layer (with z z =0.25u */f) appears to be equally valid for the convective boundary layer where z i , defined as the top of the mixed layer, is used.  相似文献   

11.
The presence of a low-level, capping inversion layer will affect the height and structure of the planetary boundary layer (PBL). Results from models of varying levels of sophistication, including analytical, turbulent kinetic energy (TKE), second-order closure (SOC), large-eddy simulation (LES) and direct numerical simulation (DNS) models, are used to investigate this influence for the neutral, barotropic PBL. Predicted and observed profiles of stress and geostrophic departure components, and integral measures, such as the parameters of Rossby-number similarity theory, are compared for the KONTUR, Marine Stratocumulus, JASIN, Leipzig, Pre-Wangara and Upavon field experiments.Analytical models of the equilibrium value of inversion height zi, which depend on the surface friction velocity u*, and both the Coriolis parameter f and the free-flow Brunt-Väisälä frequency N, are found to give reasonable estimates of the PBL height. They also indicate that only the KONTUR and Marine Stratocumulus experiments were strongly influenced by N. More quantitative comparisons would require larger, more comprehensive datasets. The effects of the presence of a capping inversion on the profile structure were found to be insignificant for h* = |f|zi/u* > 0.15.The simple analytical model performed quite well over all values of h*; it predicted the profiles of the longitudinal stress component (in the direction of the surface stress) better than the lateral component. The more advanced models performed well for small values of h* (for flow over the sea), but systematically underestimated the cross-isobaric angle for flow over land. These models predicted the profiles of the lateral stress component better than the longitudinal component. The profiles of the analytical model agreed with those of the advanced models when the constant eddy viscosity of the outer layer was increased.Agreement with DNS was achieved by increasing the eddyviscosity of the analytical model by a factor of 5.Zilitinkevich and Esau(2002, Boundary-Layer Meteorology, 104, 371–379)suggest that the neutral, barotropic values of A and B of Rossby-numbersimilarity theory are not universal constants, but depend on the ratio N/|f|. The dependence for A and B is calculated using the analytical model and TKE models. Over the sea (h* 0.1; N/|f| 100, where we have used the Zilitinkevich-Esau relation to convert between h* and N/|f|) there is agreement between the model predictions and observations; however over land where the equilibrium boundary-layer height is greater (h* 0.35; N/|f| 10) the inconsistency between the advanced model predictions (TKE, SOC, LES, and DNS) and observations, as noted previously by Hess and Garratt, still exists. We attribute this disagreement to violations of the strict assumptions of steady, horizontally homogeneous, neutral, barotropic conditions implicit in the observations. At small values of zi and a strongly stable background stratification (h* 0.04; N/|f| 1000) both the TKE and analytical models predict that A and B depend significantly on h*, however observations are unavailable to confirm these predictions. Zilitinkevich and Esau call this case the `long-lived near-neutral PBL', and state that it is found in cold weather at high latitudes.  相似文献   

12.
The diurnal and seasonal variability of the mixed-layer height in urban areas has implications for ground-level air pollution and the meteorological conditions. Measurements of the backscatter of light pulses with a commercial lidar system were performed for a continuous period of almost six years between 2011 and 2016 in the southern part of Mexico City. The profiles were temporally and vertically smoothed, clouds were filtered out, and the mixed-layer height was determined with an ad hoc treatment of both the filtered and unfiltered profiles. The results are in agreement when compared with values of mixed-layer height reconstructed from, (i) radiosonde data, and (ii) surface and vertical column densities of a trace gas. The daily maxima of the mean mixed-layer height reach values \(> 3\hbox { km}\) above ground level in the months of March–April, and are clearly lower (\(< 2.7\hbox { km}\)) during the colder months from September–December. Mean daily minima are typically observed at 0700 local time (UTC ? 6h), and are lowest during the winter months with values on average below 500 m. The data presented here show an anti-correlation between high-pollution episodes and the height of the mixed layer. The growth rate of the convective mixed-layer height has a seasonal behaviour, which is characterized together with the mixed-layer-height anomalies. A clear residual layer is evident from the backscattered signals recorded in days with specific atmospheric conditions, but also from the cloud-filtered mean diurnal profiles. The occasional presence of a residual layer results in an overestimation of the reported mixed-layer height during the night and early morning hours.  相似文献   

13.
Our focus is the time evolution of the turbulent kinetic energy for decaying turbulence in the convective boundary layer. The theoretical model with buoyancy and inertial transfer terms has been extended by a source term due to mechanical energy and validated against large-eddy simulation data. The mechanical effects in a boundary layer of height z i at a convective surface-layer height z = 0.05z i are significant in the time evolution of the vertical component of the spectrum, i.e. they enhance the decay time scale by more than an order of magnitude. Our findings suggest that shear effects seem to feedback to eddies with smaller wavenumbers, preserving the original shape of the spectrum, and preventing the spectrum from shifting towards shorter wavelengths. This occurs in the case where thermal effects only are considered.  相似文献   

14.
It is proposed that the ratios of the standard deviations of the horizontal velocity components to the friction velocity in the surface layer under convective conditions depend only onz i /L wherez i is the height of the lowest inversion andL is the Monin-Obukhov length. This hypothesis is tested by using observations from several data sets over uniform surfaces and appears to fit the data well. Empirical curves are fitted to the observations which have the property that at largez i /-L, the standard deviations become proportional tow *, the convective scaling velocity.Fluctuations of vertical velocity obtained from the same experiments scale withz/L, wherez is the height above the surface, in good agreement with Monin-Obukhov theory.The National Center for Atmospheric Research is sponsored by the National Science Foundation.  相似文献   

15.
From sodar measurements gathered during the Voves experiment (France, summer 1977), the variations of the temperature structure parameter C T 2 were studied in the morning planetary boundary layer. Dimensionless profiles of C T 2 are consistent with the mixed-layer scaling of Kaimal et al. (1976); however, for z < 0,5 z i, the decrease of C T 2 as z 4/3 should be weighted according to Frisch and Ochs (1975).When the final breakup of the nocturnal inversion is achieved, the variations of the maximum of the C T 2 profile are in good agreement with those predicted by Wyngaard and Le Mone (1980). Discrepancies are observed mainly when the mixed layer is shallow and mechanical turbulence is important compared with buoyancy-driven turbulence.  相似文献   

16.
Results from large-eddy simulations and field measurements have previously shown that the velocity field is influenced by the boundary layer height, z i , during close to neutral, slightly unstable, atmospheric stratification. During such conditions the non-dimensional wind profile, φ m , has been found to be a function of both z/L and z i /L. At constant z/L, φ m decreases with decreasing boundary layer height. Since φ m is directly related to the parameterizations of the air–sea surface fluxes, these results will have an influence when calculating the surface fluxes in weather and climate models. The global impact of this was estimated using re-analysis data from 1979 to 2001 and bulk parameterizations. The results show that the sum of the global latent and sensible mean heat fluxes increase by 0.77 W m−2 or about 1% and the mean surface stress increase by 1.4 mN m−2 or 1.8% when including the effects of the boundary layer height in the parameterizations. However, some regions show a larger response. The greatest impact is found over the tropical oceans between 30°S and 30°N. In this region the boundary layer height influences the non-dimensional wind profile during extended periods of time. In the mid Indian Ocean this results in an increase of the mean annual heat fluxes by 2.0 W m−2 and an increase of the mean annual surface stress by 2.6 mN m−2.  相似文献   

17.
The atmospheric boundary layer (ABL) over a given coastal station is influenced by the presence of mesoscale sea breeze circulation, together with the local and synoptic weather, which directly or indirectly modulate the vertical thickness of ABL (z ABL). Despite its importance in the characterization of lower tropospheric processes and atmospheric modeling studies, a reliable climatology on the temporal evolution of z ABL is not available over the tropics. Here, we investigate the challenges involved in determination of the ABL heights, and discuss an objective method to define the vertical structure of coastal ABL. The study presents a two year morphology on the diurnal evolution of the vertical thickness of sea breeze flow (z SBF) and z ABL in association with the altitudes of lifting condensation level (z LCL) over Thiruvananthapuram (8.5° N, 76.9° E), a representative coastal station on the western coastline of the Indian sub-continent. We make use of about 516 balloon-borne GPS sonde measurements in the present study, which were carried out as part of the tropical tropopause dynamics field experiment under the climate and weather of the sun-earth system (CAWSES)–India program. Results obtained from the present study reveal major differences in the temporal evolution of the ABL features in relation to the strength of sea breeze circulation and monsoonal wind flow during the winter and summer monsoon respectively. The diurnal evolution in z ABL is very prominent in the winter monsoon as against the summer monsoon, which is attributed to the impact of large-scale monsoonal flow over the surface layer meteorology. For a majority of the database, the z LCL altitudes are found to be higher than that of the z ABL, indicating a possible decoupling of the ABL with the low-level clouds.  相似文献   

18.
Based on measurements at Sodankylä Meteorological Observatory the regional (aggregated) momentum and sensible heat fluxes are estimated for two days over a site in Finnish Lapland during late winter. The forest covers 49% of the area. The study shows that the forest dominates and controls the regional fluxes of momentum and sensible heat in different ways. The regional momentum flux is found to be 10–20% smaller than the measured momentum flux over the forest, and the regional sensible heat flux is estimated to be 30–50% of the values measured over a coniferous forest.The regional momentum flux is determined in two ways, both based on blending height theory. One is a parameterised method, the other represents a numerical solution of an aggregation model. The regional sensible heat flux is determined from the theory of mixed-layer growth. At near neutral conditions the regional momentum flux can be determined independently of the regional sensible heat flux. At unstable conditions the two models become coupled.The information that is needed by the parameterised blending height method and by the mixed-layer evolution method in order to derive the regional fluxes of momentum and sensible heat can be obtained from radiosonde profiles of wind speed and temperature.  相似文献   

19.
Field data for the unstable, baroclinic, atmospheric boundary layer over land and over the sea are considered in the context of a general similarity theory of vertical heat transfer. The dependence of δθ/θ* upon logarithmic functions of h c z T and stability (through the similarity function C) is clearly demonstrated in the data. The combined data support the conventional formulation for the heat transfer coefficient δθ/θ* when,
  1. the surface scaling length is z T (« z 0), the height at which the surface temperature over land is obtained by extrapolation of the temperature profile
  2. the height scale is taken as the depth of convective mixing h c
  3. the temperature profile equivalent of the von Karman constant is taken as 0.41
  4. areal average, rather than single point, values of δθ are employed in strongly baroclinic conditions. No significant effect of baroclinity or the height scale ratio as proposed in the general theory is found. Variations in C about a linear regression relation against stability are most probably due to uncertainties in the areal surface temperature and to experimental errors in general temperature measurements.
  相似文献   

20.
Summer boundary-layer height at the plateau site of Dome’C,antarctica   总被引：1，自引：1，他引：0  
Measurements of the mean and turbulent structure of the planetary boundary layer using a sodar and a sonic anemometer, and radiative measurements using a radiometer, were carried out in the summer of 1999–2000 at the Antarctic plateau station of Dome C during a two-month period. At Dome C strong ground-based inversions dominate for most of the year. However, in spite of the low surface temperatures (between −50 and −20 °C), and the surface always covered by snow and ice, a regular daytime boundary-layer evolution, similar to that observed at mid-latitudes, was observed during summertime. The mixed-layer height generally reaches 200–300 m at 1300–1400 LST in high summer (late December, early January); late in the summer (end of January to February), as the solar elevation decreases, it reduces to 100–200 m. A comparison between the mixed-layer height estimated from sodar measurements and that calculated using a mixed-layer growth model shows a rather satisfactory agreement if we assign a value of 0.01–0.02 m s−1 to the subsidence velocity at the top of the mixed layer, and a value of 0.003–0.004 K m−1 to the potential temperature gradient above the mixed layer.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号